Repair/replacement of 120HP Pump and Electric Panel for Lift Irrigation Scheme Akchamal. Pump Type-RKB-100/23E 3ST

Amount

Replacement of all the worn-out parts of 76.92 Kw Pump set and 120 Hp 3-Ph Induction motor viz Clearance between impeller and casing rings, shaft sleeves and throat bush, lantern ring and shaft sleeve etc . Providing and fitting of O-ring= O-ring (52201) for Stage casing, O-ring (52203) for suction casing Part No.278.99 IDx3.53T, O-ring (52202) for Diffuser Part No.129.27 IDx3.53T and O-ring (52200) for Shaft sleeve Part No.49.5 IDx3T, Keys= key (32100) for Coupling 14x9x100L, key (3200) for First impeller 10x8x60L, key (32001) for Stage impeller 10x8x50L and key (32002) for Last impeller 10x8x100L, Oil seal (50000) for Drive End (DE) & Non Drive End (NDE) 65x85x10 Thick, Washer (20900)-02Nos, Washer (41500) for bearing lock nut-02Nos, Washer (62300) for tie bar-08Nos, Adjustable washer (20901)-02Nos, Gland packing (22300) for DE & NDE-04 Sets, Gland packing (43000)-04Sets, Bearing cover (27000) for DE-02Nos, Bearing cover (27100) for NDE-02Nos, Bearing lock nut(33600)-02Nos, Distance Sleeve (31700), Shaft sleeve (31000) suction side-01No, Roller bearing (26400) for DE-02Sets, Ball bearing (26300)-02Sets, Lock nut (33600), Wear rings (19000/19100), Bush (35801)(35800), Lantern ring (22700)-02Nos, Shaft Sleeve(31100) for DE, Internal stage bush (35501) for DWGV, Internal stage bush for diffuser-01No, Hex.nut (58200) for gland stud-04Nos, Hex. Nut (58400) for tie bar-08Nos, Grease (Servogem-2/Alvina Grease-2/NLGI-2)-05kg. Repair of corroded or rusted external motor cable(copper) with nuts/bolts/copper thimbles and washers, providing and fitting of the same after all the parts thoroughly cleaned in kerosene, petrol or benzene to remove the dust, rust etc and checked thoroughly for wear tear and damage of impellers, diffusers, casings etc of (75.92 kw) 3-STAGE centrifugal pump and (90 KW/120HP) 3-Ph Induction motor, complete greasing to motor. Complete job

Repairs to control panel by way of replacing all the damaged Connectors(MNX-140) of various capacity-06Nos, Star/Delta-03Nos, Magnetic Thermal Contactor over load relay-250A+01No, MCBs, MCCB (DM160), Fuses, Timers, Relays(90-150Amp)-02Nos, Off/On Switches, Start/Stop buttons, Amp metre-(01+02no standby), Volt metre(01+02no standby) etc.

Providing and fitting of foot valve with leather (01+02no standby), NRV(01+02No standby), sluice valve(01+02 no standby) of 100mm and broken suction pipe with allied repairs. Gland Packing-05Kg, Nuts/Bolts and washer, The job shall also include providing of priming pump (mono block) 01 HP 01 No along with 25mm PVC pipe of length 100ft for forced priming.

Providing of 05Ton chain pully-01No, Grease Gun manual type and complete tool kit (DE spanner/Ring spanner size 06-32mm=01set each, Screw drive, pliers conforming to IS/ISI standard, hand gloves-02Set and additional Gland packing-05kg, nuts and bolts with washers of different size=15kg. Thimble Clamping Tool (120-400sqmm)=01set Make:-ISO/ISI STANDARD

M/S Yangti Enterprises

M/S ZAILDAR ENTERPRISES