Construction of New CR Bldg. (9+3 Span),Yard Cable Trench, RCC Road and Misc. Civil Works at 66 KV GIDC Porbandar SS under TR Division Ranavav under TR Circle Jamnagar.

Name of Work :- “Construction of New CR Bldg (9+3 Span),Yard Cable Trench, RCC Road & Misc. Civil Works

at 66 KV GIDC Porbandar SS under TR Division Ranavav under TR Circle Jamnagar.”

Description Unit Rate Amount

[A] EXCAVATION, FILLING AND EARTH WORK

1 Demolition of brick work and stone masonry 44.00 CMT 584.00

including stacking of serviceable materials and

disposal of unserviceable materials with all

2 Demolition of Unreinforced cement concrete 8.00 CMT 646.00

including stacking of serviceable materials and

disposal of unserviceable materials with all

3 Demolition of R.C.C. work including stacking 18.00 CMT 1123.00

of serviceable materials and disposal of

unserviceable materials with all lead and lift.

4 Dismentaling tiled of stone floors laid in mortar 80.00 SMT 51.00

including stacking of serviceable materilas and

disposal of unserviceable materials with all

5 Dismentling doors, windows, ventilators etc. 5.00 NO 199.00

(wood or steel or alluminium) shutters including

chowkhats architraves, holdfasts and other

attachment etc. complete and stacking them

within all lead and lift.(i) Not exceeding 3Sq.M.

Dismentling doors, windows, ventilators etc. 2.00 NO 267.00

(wood or steel or alluminium) shutters including

chowkhats architraves, holdfasts and other

attachment etc. complete and stacking them

within all lead and lift.(i) exceeding 3Sq.M. in

[B] CONSTRUCTION

(1) MASONARY WORK

7 Dismentling C.I. pipes G.S.W. pipes abd A.C. 20.00 RMT 80.00

rain water pipes with fittings and clamps

including stacking the materials with all lead

and lift ( for any dia, of pipe)

8 Dismantling santtary fittings like washbasin. 2.00 NO 430.00

W.C. pan Indian and European type, flushing

tank etc. including stacking the materials with

all lead and lift.

8 Excavation for foundation up to 1.50m Depth 211.00 CMT 468.00

including sorting out and stacking of useful

materials & Refilling the sides of the trenches

and disposing of the excavated stuff up to any

lead, including De-watering if required - Any

type of soil/ Murrum/Soft rock / Hard rock

[B] Excavation for foundation 1.50 to 3.10m Depth 10.00 CMT 1133.00

including sorting out and stacking of useful

materials & Refilling the sides of the trenches

and disposing of the excavated stuff up to any

lead, including De-watering if required - Any

type of soil/ Murrum/Soft rock / Hard rock

11 Filling in plinth/trenches & yard with excavated 94.00 CMT 136.00

earth in layers not exceeding 200 mm, thick

layers including watering, ramming,

consolidating etc., complete as directed by

EIC. - Excavated earth from foundation. The

item rate includes all leads & lifts.

(2) CONCRETE WORK

12 Filling in foundation and plinth with murrum or 222.00 CMT 304.00

selectedsoil in layers of 200mm thickness

including watering, ramming and consolidating

etc. complete as directed by EIC - Murram or

selected soil of approved quality brought from

outside including all lead and lifts.

13 Earthwork in cutting in all sorts of soil, 60.00 CMT 232.00

murrum, soft rock and hard rock including

sorting out and stacking of useful materials &

Refilling the sides of the trenches/wall/open

area and disposing of the excavated stuff up to

any lead as and where directed by EIC

14 Filling in the plinth with sand/quarry dust 20.00 CMT 492.00

under floors, including watering, ramming,

consolidating, and dressing, etc., complete.

15 Providing White stone Bella masonry (incl. 78.00 CMT 6167.00

quoin blocks, jamb blocks, closer, etc;)

approved size in the foundation and up to plinth

in C.M. (1:5) including racking out joints up to

12mm depth, scaffolding, curing, filling up the

gaps between the joints complete as directed by

E.G.. Up to PLINTH.

16 Providing White stone Bella masonry 100.00 CMT 6459.00

(incl.quoin blocks, jamb blocks, closer, etc;)

approved size in foundation and up to plinth in

C.M. (1:5) including racking out joints up to

12mm depth, scaffolding, curing, filling up the

gaps between the joints complete as directed by

E.G.. for Super Structure G.F+F.F+Stair Cabin

17 Half Brick masonry in common burnt clay 40.00 SMT 642.00

building bricks having a crushing strength not

less than 35 kg/sq. m in cement mortar 1:4(1

cement & 4 coarse sand) up to plinth & two

floors G.F+F.F+Stair Cabin. - Conventional

18 Providing and laying cement concrete 1:4:8(1 126.00 CMT 2765.00

Cement: 4 Coarse and: 8 black crushed stone

aggregate 40mm nominal size ) and curing

completely- Foundation and plinth.

19 Providing PLY WOOD form work shuttering so 106.00 SMT 285.00

as to give a smooth exposed finish including

centering (adjustable tubular steel supports).

Shuttering strutting and propping etc. for any

height of propping and centering below

supporting floor to ceiling , and removal of the

same for reinforced concrete and plain

concrete. for Footings , foundations and

20 Providing & laying control cement concrete M-20 68.00 CMT 4117.00

as per mix design, exposed work with curing,

etc., complete excluding the cost of ply wood

form work & adjustable tubular steel supports

/ Props. but excluding the cost of

reinforcement.G.F+FF & Staircasse -For

Footing base of col., foundation & mass

21 Providing & laying control cement concrete M-20 1.00 CMT 10103.00

as per mix design, exposed work with curing,

etc., complete, including the cost of ply wood

form work & adjustable tubular steel supports

/ Props. but excluding the cost of

reinforcement.G.F+FF & Staircasse -For

22 Providing & laying control cement concrete M-20 1.00 CMT 7911.00

as per mix design, exposed work with curing,

etc. Complete, including the cost of plywood

form work & adjustable tubular steel supports

/ Props. but excluding the cost of

reinforcement.G.F+FF & Staircase -For Beams

23 Providing & laying control cement concrete M- 5.00 CMT 8131.00

20 as per mix design exposed work with curing,

etc., complete including the cost of ply wood

form work & adjustable tubular steel supports

/ Props. but excluding the cost of

reinforcement.G.F+FF & StaircasseLintel,

Chajja, Slab, Coping, and other cantilever

(3) PLASTER WORK

24 Providing & laying control cement concrete M- 5.00 CMT 9383.00

20 as per mix design, exposed work with curing,

etc., complete, including the cost of ply wood

form work & adjustable tubular steel supports /

Props. but excluding the cost of

reinforcement.G.F+FF & Staircasse-Vertical

25 Providing & laying control cement concrete M-30 40.00 CMT 4647.00

as per mix design, exposed work with curing,

etc., complete excluding the cost of ply wood

form work & adjustable tubular steel supports

/ Props. but excluding the cost of

reinforcement.G.F+FF & Staircasse -For

Footing base of col., foundation & mass

26 Providing & laying control cement concrete M-30 29.00 CMT 10425.00

as per mix design, exposed work with curing,

etc., complete, including the cost of ply wood

form work & adjustable tubular steel supports

/ Props. but excluding the cost of

reinforcement.G.F+FF & Staircasse -For

27 Providing & laying control cement concrete M-30 51.00 CMT 9715.00

as per mix design, exposed work with curing,

etc. Complete, including the cost of plywood

form work & adjustable tubular steel supports

/ Props. but excluding the cost of

reinforcement.G.F+FF & Staircase -For Beams

28 Providing & laying control cement concrete M- 77.00 CMT 8392.00

30 as per mix design exposed work with curing,

etc., complete including the cost of ply wood

form work & adjustable tubular steel supports

/ Props. but excluding the cost of

reinforcement.G.F+FF & StaircasseLintel,

Chajja, Slab, Coping, and other cantilever

29 Providing & laying control cement concrete M- 28.00 CMT 9644.00

30 as per mix design, exposed work with curing,

etc., complete, including the cost of ply wood

form work & adjustable tubular steel supports /

Props. but excluding the cost of

reinforcement.G.F+FF & Staircasse-Vertical

30 Supply, Installation and fixing in position of Fuji 200.00 RMT 5121.00

silvetrech or its equivalent make Precast RCC

Cable trench having size of 600 mm wide and

600 mm depth thickness of wall 65 mm at top

and top PSC cover. RCC cable trench & cover

provided as per drawing, manufactured with

self compacted concrete, rate included, jointing

with GP2 or it's equivelent griuting mortar,

drilling hole when as required for cable passing

with core cuttuer with top PSC cover, RCC cable

trench, Fixing as per instruction of engineer in

Precast U (600 X 600 )Shape Drain T 6 for (11kv

Power Cable Trench). Width and Depth of each

section for required quantities shall be as per

below table. The product should be meeting BIS

requirements.. Product shall have load carrying

capacity - 4.8 Tonnes made by using advanced

precast technology having High Performance

Self Compacting Concrete of M50 grade and Fe

500 D grade TMT steel reinforcement bar.

The product shall have tie shape groove of 10-

20 mm width X 25 mm depth on both sides of

each precast unit product for jointing two

precast units. The Precast U Shape drain

should have special in built insert at appropriate

location for fixing De-Shackle for mechanical

installation, including supply, transportation at

31 Providing & Fixing in position as per approved 26.50 MT 76520.00

drawing TMT steel reinforcemnet bars FE

500/500D, confirmong to IS 1786 in RCC work

including Cutting,bending, binding with

gauge annealed wire, of bars as per IS

requirenment If necessary and placing in

position etc. completed for RCC work. etc

completed as directed by EIC.

32 Providing fusion bonded Epoxy coating not less 26.50 MT 8643.00

than 175 micron thickness and up to 300 micron

to reinforcement bars as per IS-13620-

1993/ASTM-775 M including testing of

coating at plant and all taxes

(3) PLASTER WORK

33 Providing 10 to 15 mm thick chemical plaster to 297.00 SMT 308.00

the ceiling/Slab using Self curing special ready

plast (Ready mix plaster) of Ultratech, Fosroc,

Megicrete, JSW cement,Walplast or Equivalent

brand, per manufacturer's recommended process

and as directed by the in-charge engineer.

34 Providing 15mm thick sand face single coat 797.00 SMT 332.00

plaster on masonry / bela / concrete wall using

special ready mix plaster Ultratech, Fosroc,

Megicrete, JSW cement,Walplast or Equivalent

brand,per manufacturer's recommended process

and as per manufacturas directed by the in-charge

35 Providing 20mm thick sand face double coat on 861.00 SMT 456.00

the wall up to a height of 10 meters above ground

level, using special ready mix plaster Ultratech,

Fosroc, Megicrete, JSW cement,Walplast or

Equivalent brand consisting of 12mm thick backing

coat and 8mm thick finishing coat per

manufacturer's recommended process and as per

manufacturas directed by the in-charge engineer.

36 Providing & fixing 18 gauge wire mesh jali 99.00 SMT 201.00

having width 200 to 300 mm with nails before

finishing the surface with plaster. The item

includes providing necessary scaffolding also)

37 Providing cement vata (10cmx10cm size) 208.00 RMT 24.00

quarter round in cement mortar 1:1 including

neat cement finishing watering etc. complete.

38 Providing & Applying Two coats of Birla or 907.00 SMT 40.00

Asian Acrylic Lappy (Putty) and two Coats of

primer of approved brand and manufacture on

the new wall/ceiling surface to give an even

shade, including thoroughly brushing the

surface free from mortar dropping and other

foreign matter, and sandpapering smooth.

39 Providing distempering (three coats) with oil 854.00 SMT 110.00

bound distemper of approved brand and

manufacture and of required shade on

undercoated wall surface to give an even shade

over and including a priming coat with distemper

primer of approved brand and manufacture after

thoroughly brushing the surface free from

mortar droppings and other foreign matter and

also including preparing the surface even and

sand papered smooth. Minimum 03 year

warranty certificate to be taken from paint brand.

(Note: Before making final payment to agency

warranty certificate from the original

manufacture for specific project on the name of

agency must be collected.)

40 Providing & applying 2 coats of APOCOLITE 1007.00 SMT 121.00

APEX or its equiv. ACRYLIC EXTERIOR paint

on existing plastered surface or approved make

& shade including finishing & thinning as per

manufacturer’s instruction. A gap of 6 hrs.

Should be given between 2 subsequent coats.

The work should be carried out strictly as per

manufacturer's specification and requirement

comp. as directed by EIC. Minimum 05 year

warranty certificate to be taken from paint brand.

(Note: Before making final payment to agency

warranty certificate from the original

manufacture for specific project on the name of

agency must be collected.)

41 Providing & applying 3 coats of ACID/ALKALI 51.00 SMT 131.00

resisting paint of approved shade & make to

wall, ceiling including filling putty smoothing the

surfaces scaffolding etc. complete as directed

42 Providing and laying approved quality polished 304.00 SMT 1129.00

Kotah stone slab(25mm th. and 600mm x

600mm in size) flooring including using

35x25mm approved quality machine cut,

marble strip over 20mm (average) thick base of

cement mortar 1:6 (1 cement : 6 course sand or

L.M. 1:1.5 laid over and jointed with grey cement

slurry including rubbing and mirror polishing

using polishing machine with grinding six

emery's of different no. including using special

chemical powder for polishing including white

cement coating two times during polishing for

filling up minute holes or cracks in joints etc.

complete. The item rate includes the removing

the existing flooring including base concrete,

throwing the stuff as & where directed upto any

lead. Etc. complete as directed by E.I.C. The

waste material will be property of contractor.

43 Providing and laying polished Kota stone slab 40.00 SMT 1187.00

25 mm th. in risers of steps, Dedo and sills laid

on 10 mm thick CM 1:3 & jointed with grey

cement slurry including rubbing and polishing

44 Providing and laying 24"x24" Vitrified 8 to 10 29.00 SMT 1109.00

mm thick tiles-JOHNSON / KAJARIA /

NITTCO / SIMPOLO or its equivalent make

flooring over 20mm(Average) base of Cement

Mortar 1:6 (1-Cement : 6 Coarse Sand) on new

surface or fixing on existing flooring by adhesive

materials and also for skirting and dedo on

10mm thick cement plaster in 1:3 including

dismentalling of existing flooring and jointed

with colour cement slurry including finished with

flush pointing & cleaning the surface etc

complete for light shade

45 Providing and laying color glazed tiles- 68.00 SMT 1544.00

JOHNSON / KAJARIA / NITTCO / SIMPOLO or

its equivalent make 300mm x 450mm x 8 to

mm thick in flooring & Dedo laid on bed of 12mm

thick cement mortar 1:3 (1 cement : 3 course

sand) & fixing the same in cement & providing

12mm thick back coating of cement plaster in

CM 1:3 for base, filling the joints with white/color

cement neatly finishing the joints curing etc.

(6) DOORS AND WINDOWS

46 Providing and fixing fully glazed / partly glazed 15.00 SMT 3814.00

double leaf 20 micron thick colour anodized

aluminium door with following listed extruded

section manufactured by Jindal aluminium Ltd. &

other accessories,the Alluminium sections are of

HE9WP Group: (1) with door outer frame section of

63.5 x 38.1 x 3.18 mm thick weighing 1.777 kg/Rmt

(J4605) (2) Door shutter vertical style (meeting style)

of 53.7 x 44.45 x 2.30mm thickness (J4537)

weighing 1.238 Kg/m (3) Hinge side 53.7 x 44.45 x

2.30mm thickness (J4540) weighing 1.173 Kg/Rmt

(4) Bottom rail of size 150 x 44.45 x 2.40mm

thickness (J4538) weighing 2.376 Kg/Rmt (5) Lock

rail of size 83.5 x 44.45 x 2.40mm thickness (J4549)

weighing 1.679 Kg/Rmt (6) Top rail of size 47.62 x

44.45 x 3.18mm thickness (J4506) weighing

Kg/Rmt (7) Ventilator middle member (if required)

49.91 x 44.45 x 3.00mm thickness (J4621) weighing

1.495 Kg/ Rmt (8) Aluminium handle 127.00 x 37 x

3.65mm thickness (J4483) weighing 1.912 Kg/No.

(9) Tower bolt 250mm long (J4954) (10) Aluminium

bending mortice lock (J4420) (11) Top panel using

6.0mm thick Triveni or Modi or Saint Gobain make

float glass fixed with PVC Clear gasket (12) Bottom

panel using 4mm thick exterior aluminium sheet

board of make approved by the Engineer - in -

Charge (for partly glazed door) fixed with virgin PVC

clear gasket (13) Hydraulic floor mounted spring

godrej or equivalent of make approved by the

Engineer - in – Charge. with all other required

fixtures and fastening of colour anodized with

aluminium beading, with all labours and materials

etc. complete as directed by EIC. Aluminium section

user for fixing hinges, door closer, etc. shall be filled

with country teak wood to receive screws.

47 Providing and fixing factory made uPVC white 41.00 SMT 7305.00

colour sliding glazed window of VEKA or its

equivalent make upto 1.50 m in height dimension

comprising of uPVC multi-chambered frame with in-

built roller track and sash extruded profiles duly

reinforced with 1.60 ± 0.2 mm thick galvanized mild

steel section made from roll forming process of

required length (shape & size according to uPVC

profile), appropriate dimension of uPVC extruded

glazing beads and uPVC extruded interlocks, EPDM

gasket, wool pile, zinc alloy (white powder coated)

touch locks with hook, zinc alloy body with single

nylon rollers (weight bearing capacity to be 40 kg),

G.I fasteners 100 x 8 mm size for fixing frame to

finished wall and necessary stainless steel screws

etc. Profile of frame & sash shall be mitred cut and

fusion welded at all corners, including drilling of

holes for fixing hardware's and drainage of water etc.

After fixing frame the gap between frame and

adjacent finished wall shall be filled with weather

proof silicon sealent over backer rod of required size

and of approved quality, all complete as per

approved drawing & direction of Engineer-in-

Charge. Variation in profile dimension in higher side

shall be accepted but no extra payment on this

account shall be made.

---- Two track two panels sliding window made of

(big series) frame 67 x 50 mm & sash 46 x 62 mm

both having wall thickness of 2.3 ± 0.2 mm and

single glazing bead / double glazing bead of

appropriate dimension . (Area of window above

sqm upto 2.50 sqm).

Float glass pane of nominal thickness 5mm (weight

not less than 12.5kg/sqm)

Note: For uPVC frame and sash extruded profiles

minus 5% tolerance in dimension

i.e. in depth & width of profile shall be acceptable

(7) FABRICATION ITEMS

50 Providing and fixing approved quality rolling 12.00 SMT 5340.00

shutters of approved make and made with

crane handle as per IS 6248 -1979 having

guage or minimum 0.90 mm sheet thickness

and 80mm wide M.S. Laths interlocked together

through their entire length and jointed together

at the ends by end locks mounted on specially

designed pipe shaft with bracket plates guide

channels and arrangements for inside locking

with push pull operation with gear mechanism

etc complete including the cost of hood cover

with one coat of red oxide primer followed

by 3 coats of oil painting of approved shade &

tint with drum & cover in perfect working

condition etc., complete as directed. (The

measurement shall be paid for wall opening plus

51 Providing & fixing MS Grill of approved quality 286.00 KG 122.00

& design weighing 25 to 30 kg/SMT. as per

drawing & as directed with necessary grill door

(if required) including welding or bolted fixtures

and fastening. etc. with 3 coats of oil painting

of approved shade & tint with one coat of red

oxide primer including grouted hold fast in CC

(1:2:4) etc. complete as directed by EIC.

52 Providing and fabricating and placing approved 1000.00 KG 106.00

quality steel work welded Hot dip galvanizing

as per IS-2633/72 & 209 of 1966 or latest

amendment, etc complete in built up sections,

framed work including cutting, hoisting, fixing in

position and applying a priming coat of red lead

paint :-(A) In beams and joints channels angles,

tees, flats with connecting cleats as in main and

cross beams, hip and jack rafters, purloins

connected to common rafters etc.

53 Providing & fixing pre-cast Rubber Dye inter 219.00 SMT 701.00

locking concrete block 60mm thick with

grade of concrete M300 pnumatic compressed

Vibrated mechanically and as per approved

designed confirming to IS 15658:2006

including 75mm sand layer for levelling and

filling the Joints with sand in proper line and

level as per guidlines of IRC:SP 63-2018 etc.

54 Providing & placing 50mm thick & 300mm wide 22.00 SMT 532.00

Prestressed Concrete Cover (for clear span of

up to 1.2 meter in proportion (1:1:5:3) or M-20

necessary reinforcement or 4mm dia HT steel

wire-4 Nos. bars and 4mm dia. distribution bars

at 150 mm C/C as per drawing & design,

vibrating with vibrators. Finishing all the

surfaces, curing by placing in a water pond for

ten days, etc. Complete as directed by E.I.C. (

The rate includes cost of all material required,

labour charges, transportation, loading,

unloading, etc.

55 Providing & applying water proofing treatment 372.00 SMT 524.00

by on terrece area of building Smart Care damp

proof ultra of Asian paints or equivalent by (1)

cleaning the terrace, parapet wall etc. complete

by means brush, water etc. & make it complete

dust free (2) Applying crack seal on cracks of

terrace roof, parapet etc (3) providing first coat

of self priming smart care damp proof ultra of

asian paints or equivalent using brush & by

adding 33% thinner (water) & kept surface free

for 4-6 hours for making dry (4) applying first

coat of water proofing smart care damp proof

ultra of asian paints or equivalent using roller

without adding any thinner & kept surface free

for 4-6 hours for making it dry (5) joints of

parapet & slab packing work by smart care joint

tap of asian paints or equivalet (6) applying

second coat of water proofing smart care damp

proof ultra of asian paints or equivalent utilizing

roller without adding any thinner & kept surface

free for 4-6 hours for making it dry. The

contractor shall submit the performance

guarantee of manufacture. The contractor shall

also submit a performance guarantee of the

waterproofing item at the rate of 20% of the cost

of an item of work order for a period of 5 years

from the actual date of completion of work on

stamp paper of appropriate value in the

approved format of GETCO. The agency has to

give consent to deduct 20% of the cost of an

item of work order for a period of 5 years from

the actual date of completion from his bill and

shall be withheld as a performance guarantee

for five years. (Note: Before making final

payment to agency warranty certificate from the

original manufacture for specific project on the

name of agency must be collected.)

56 Providing & applying water proofing treatment 849.00 SMT 252.00

on wall area of building by Smart Care damp

proof ultra of Asian paints or equivalent by (1)

cleaning the terrace, parapet wall etc. complete

by means brush, water etc. & make it complete

dust free (2) Applying crack seal on cracks of

terrace roof, parapet etc (3) providing first coat

of self priming smart care damp proof ultra of

asian paints or equivalent using brush & by

adding 33% thinner (water) & kept surface free

for 4-6 hours for making dry (4) applying first

coat of water proofing smart care damp proof

ultra of asian paints or equivalent using roller

without adding any thinner & kept surface free

for 4-6 hours for making it dry (5) joints of

parapet & slab packing work by smart care joint

tap of asian paints or equivalet (6) applying

second coat of water proofing smart care damp

proof ultra of asian paints or equivalent utilizing

roller without adding any thinner & kept surface

free for 4-6 hours for making it dry. The

contractor shall submit the performance

guarantee of manufacture. The contractor shall

also submit a performance guarantee of the

waterproofing item at the rate of 20% of the cost

of an item of work order for a period of 5 years

from the actual date of completion of work on

stamp paper of appropriate value in the

approved format of GETCO. The agency has to

give consent to deduct 20% of the cost of an

item of work order for a period of 5 years from

the actual date of completion from his bill and

shall be withheld as a performance guarantee

for five years. (Note: Before making final

payment to agency warranty certificate from the

original manufacture for specific project on the

name of agency must be collected.)

57 Providing & applying anti termite treatment, as 421.00 SMT 107.00

per IS 6313 (Part.II & II 2001) for building works

in pre construction & post const. stages, using

chemicals conforming to relevant IS in water

emulsion and effective when applied uniformly

over the area to be treated. The chemical to be

used is chlorophriphos 20% EC or its

equivalent. The treatment is to be carried out

as per the procedure mentioned below and

treated plinth surface area is to be taken for

measurement. (with performance guarantee for

5 years)a)For pre construction treatment: For

plinth filling & periphery holes in side plinth to be

drilled 300MM C/C each having depth 1.5M and

for inside plinth the hole are to be treated with

diluted chemical solution, 1.5 lit. per hole, in the

ratio of 1:20. For periphery i.e. out side plinth

the ditch is to be treated with diluted solution

2.25 litre per rmt. In the ratio 1:20. The entire

surface area is to be treated with diluted solution

of dose 2.5 litres per smt. over and above as a

plinth surface treatment.

58 Providing & fixing approved quality 300x300mm 1.00 NO 303.00

size marble year plate with black border all

round & letters including fixing the same in

cement mortar etc. comp. As directed by EIC.

59 Drilling of Bore holes 32mm to 40mm dia by 202.00 NO 758.00

means of compressor machine having depth of

hole up to 1.00 to 1.20 mt. as decided by

Engineer in charge & as per drawing in all sorts

of Soil, sand, clay, hard rock etc. truly vertical to

existing land with cleaning the same by air &

Grouting of Bores holes by means of Cement,

sand, Grit, etc. with utilization of aluminum

powder or ACC shrink compound ‘N’ grout or

equivalent any other bonding material as

approved by competent authority in suitable

content with mixing ramming curing etc.

complete including with 20mm dia. of M.S.

Anchor bar having minimum length of 1.70 mt

(Reinforcement) ( The rate includes the cost of

MS Anchor bar) as directed by Engineer in

[D] WATER SUPPLY AND DRAINAGE & MISC.

60 Providing, laying and jointing in true line and 10.00 RMT 72.00

level 15 mm diameter UPVC pipe (SCH-40) for

cold water including fittings make PRINCE /

SUPREME / ASTRAL / FINOLEX or equivalent

as approved by Engineer in charge. Pipe shall

be fixed on the wall with the help of clamp at

every two meter c/c or shall be concelled as

directed including necessary fittings, fastening,

fixtures, excavation and back filling. The rates

includes testing of pipe and jointing and fixing

the same with adhesive solvent, including cost

of all materials.

61 Providing, laying and jointing in true line and 15.00 RMT 91.00

level 25 mm diameter UPVC pipe (SCH-40) for

cold water including fittings make PRINCE /

SUPREME / ASTRAL / FINOLEX or equivalent

as approved by Engineer in charge. Pipe shall

be fixed on the wall with the help of clamp at

every two meter c/c or shall be concelled as

directed including necessary fittings, fastening,

fixtures, excavation and back filling. The rates

includes testing of pipe and jointing and fixing

the same with adhesive solvent, including cost

of all materials.

62 Providing, laying and jointing in true line and 100.00 RMT 147.00

level 40 mm diameter UPVC pipe (SCH-40) for

cold water including fittings make PRINCE /

SUPREME / ASTRAL / FINOLEX or equivalent

as approved by Engineer in charge. Pipe shall

be fixed on the wall with the help of clamp at

every two meter c/c or shall be concelled as

directed including necessary fittings, fastening,

fixtures, excavation and back filling. The rates

includes testing of pipe and jointing and fixing

the same with adhesive solvent, including cost

of all materials.

63 Providing & laying rigid 6 kg/cm2 PVC 42.00 RMT 147.00

drainage pipe 75mm dia. including necessary

fittings like bend, tee,Y bend plug etc. fixed with

wall by means of clamps / brackets at 1 to

meter distance such that pipe should not touch

the wall & nails with water tight joints by

approved solution etc. complete as directed by

64 Providing & fixing PRINCE / SUPREME / 126.00 RMT 149.00

ASTRAL / FINOLEX. rigid P.V.C. pipe for Rain

water 4 kg/cm2 including necessary fittings

like bends, shoe, cowl etc. & fixing the pipes to

the wall in plumb by means of G.I.

Clamps/brackets of 18 gauge sheet at 1 to

meter distance, filling the joints with approved

solution complete as directed by E.I.C. - 90 mm

65 Providing & laying rigid 6 kg/cm2 PVC 65.00 RMT 292.00

drainage pipe 110mm dia. including

necessary fittings like bend, tee,Y bend plug etc.

fixed with wall by means of clamps / brackets

at 1 to 1.5 meter distance such that pipe should

not touch the wall & nails with water tight joints

by approved solution etc. complete as directed

66 Supplying and fixing reinforced concrete 108.00 RMT 367.00

heavy-duty non-pressure pipes with collars for

culverts, including necessary excavation &

refilling the trenches, joining the pipes with

C.M. (1:1) & filling 150mm thick concrete

(1:4:8) below joints, curing, etc., completed as

directed by E.I.C I.S. Class NP2 of internal

diameter 150 mm.

67 Supplying and fixing reinforced concrete heavy- 48.00 RMT 874.00

duty non-pressure pipes with collars for

culverts, including necessary excavation &

refilling the trenches, joining the pipes with

C.M. (1:1) & filling 150mm thick concrete

(1:4:8) below joints, curing etc., completed as

directed by E.I.C I.S. Class NP3 of internal

diameter 300 mm.

68 Providing and fixing approved quality PVC 5.00 NO 608.00

SWR Nahani trap IS 14735 for drain 75 mm

diameter with jaliwith self cleaning design with

CI scread down or hinged grating including the

cost of cutting with additional aluminum

perforated jali cover & Pipe outside the wall

with plug, bend, and making good the walls etc.

complete as directed by E.I.C.

69 Providing and fixing approved quality S.W. 4.00 NO 1279.00

gully trap with C.I. Grating, brick masonry

chamber, and water-tight C.I. cover with frame

of 300 mm x 300 mm size (inside) with

standard weight. (B) 150 mm x 100mm size P

70 Providing & fixing M.S. cover for cable trench in 22.00 SMT 5303.00

control room made from 14 Gauge M.S. Sheet

having M.S. Angle frame alround of 40 X 40 X

5mm. size and cover shutter frame of angle

x 30 x 5 mm size & 2 supports at middle

including oil painting of 3 coats of approved

shade & make. Providing 2 handles of 6mm. dia.

M.S. bar as per instruction etc., complete as

directed by E.I.C.

71 Providing & fixing approved quality Fiber 3.00 NO 2288.00

Reinforced Polymer(FRP) (18 Inch x 24 Inch

x 1.2 inch) in Size Manhole Covers 2.5 Tons

or More Capacity with water-tight Frame &

fixing the same in concrete or Mortar, etc.,

complete as directed by E.I.C.

72 Providing & fixing approved quality non-return 2.00 NO 300.00

fullway wheel valve 40MM DIA UPVC make

PRINCE / SUPREME / ASTRAL / FINOLEX or

equivalent as approved by Engineer in charge.

73 Providing & fixing approved quality non-return 2.00 NO 150.00

fullway wheel valve 25MM DIA UPVC make

PRINCE / SUPREME / ASTRAL / FINOLEX or

equivalent as approved by Engineer in charge.

74 Providing and fixing approved quality screw 9.00 NO 185.00

down bib tapes of following size: (A) Brass

screw down bib tap polished bright 15mm dia.

75 Providing & Fixing approved quality a set of 6 2.00 NO 457.00

Nos. of stainless steel coat racks of approved

quality fixed on 20 mm. thick teak wood batten

including 3 coats of oil painting etc., complete

as directed by E.I.C

76 Providing & fixing approved quality Fiber 1.00 NO 2543.00

Reinforced Polymer(FRP) (24 Inch x 24 Inch

x 1.2 inch) in Size Manhole Covers 2.5 Tons

or More Capacity with water-tight Frame &

fixing the same in concrete or Mortar, etc.,

complete as directed by E.I.C.

77 Providing and fixing approved quality C.P. 2.00 NO 610.00

Brass towel rod complete with C.P. Brass

brackets fixed to wooden plugs with C.P. Brass

screws. 600mmx20mm size

78 Providing and fixing approved quality 600mm x 2.00 NO 851.00

450mm beveled edge mirror of superior glass

mounted on PVC moulded frame and fixed to

wooden plugs with C.P. brass screws and

79 Providing & Fixing 450X400mm size Stainless 1.00 NO 2304.00

Steel approved brand Kitchen Sink Incl waste

pipe & Coupling etc; complete as directed by

(3) BORE AND WATER SUPPLY

80 Providing & fixing approved quality readymade 1.00 NO 4100.00

P.V.C. water tight storage tank of 1000 liters

capacity made from linear low density

polythene & low density polythene LDPF

product confirming to I.S. : 10146-1982 with

cover including providing & fixing one 20mm dia,

float valve ball-cock, one 20mm dia G.I. over

flow pipe of length up to 0.30 t. including making

all connection for inlet/outlet etc. complete as

directed by E.I.C.

81 Providing and fixing Wash basin with single 2.00 NO 2416.00

hole pillar tap with tap with C.I. or M.S.

brackets painted while/colour including cutting

holes and making good the hole including pillar

tap,chromium plated bottle trap,stop cock,

fisher union, Brass waste pipe etc complet.

82 Providing and fixing approved quality European 2.00 NO 2530.00

PAN water closet squatting pan size 580mm

including providing and fixing Plastic seat cover

& jet sprey, 100mm size P or S trap jointing tap

with the pan and soil waste pipe and with G.I.

inlet connection for flush pipe with W.C. pan

and chromium plated brass half turn flush cock

of approved quality of 25mm dia etc. complete.

83 Providing and fixing Urinal of approved quality 1.00 NO 1689.00

including connection with trap and with integral

longitudinal flush pipe concealed outlet (A)

squaring plate pattern white earthenware

84 Providing B.B. Masonry inspection chamber 5.00 NO 3264.00

for underground CI inspection chamber and

bends with bricks heavy crushing strencth not

less than 35 kg/cm2 in CM (1:5), CI cover with

frame (light duty) 455mm x 610 mm internal

dimensions, total weight of cover with frame to

be not less than 38 kgs (weight of cover 23 kg

and weight of frame 15 kg). RCC top slab with

1:2:4 mix (1cement: 2Coarse sand : 4 graded

stone aggregate 20 mm size). Foundation

cocnrete 1:5:10, inside plaster 15 mm thick with

cement mortar 1:3 finished smooth with floating

coat of neat cement on walls and bed concrete

etc. complete. Inside dimensions 450mm x

mm up to 900 mm deep.

85 Providing 2500mm internal diameters & 4.00 Mt 1.00 NO 103968.00

deep soak pit including excavation in all types

of soil & soft rock & Hard rock & P.C.C. (1:4:8)

bedding 300mm thick below masonry and

450mm thick brick masonry in C.M. (1:6) up to

600mm height 350mm thick for further 600mm

& 230mm thick for remaining height honey

combed, plastering in C.M.(1:3) outside up to

1.5mt height and 100mm thick RCC slab with

600x600mm CI having cover with frame, with

necessary reinforcement as per design & CI

vent pipe 1800mm long with brick masonry pillar

350x350x450 plastered all around filling 40 to

50mm brick bats up to 1.5Mt depth including

16mm dia MS"U" stages steps refilling including

disposal of the surplus excavated earth up to the

lead of 300Mt radius including 3 coats of white

or colour wash to all exposed finished surface

etc. completed as directed.

[E] YARD LELLING & METAL SPREADING &

86 Earthwork for embankment including 850.00 CMT 185.00

breaking clods, dressing with all lead and lift

(including watering, rolling and consolidation

with 8 to 10 T rollers in layers of 200 mm thick

at O.M.C to required dry density). Including all

Labour charges & approved quality of

Earth/Murrum & Govt. royalty charges etc. if

applicable. Approved quality of yellow

earth/Murrum to be brought from outside.

(Note : 25 % of the successive bill amount

shall be retained till lapse of one full scale

monsoon and rectification of subsistence if

any to the design ground level)

87 Rolling of Earthwork in layers with power roller 522.00 SMT 23.00

including filling in depressions which occure

during the process and watering of earth work

as directed by engineer in charge.

88 Providing and laying 150 mm thick Granular 80.00 CMT 805.00

sub-base in two layers by providing coarse

graded material Grading- I using B.T.M.C.

(Black Trap Machine Crushed) metal 53 mm to

26.5 mm at 35 % , crushed stone aggregate

26.5 mm to 4.75 mm at 45% and below 2.36 mm

at 20% ,having C.B.R. not less than 30%, as

per table 402 of MORTH gradation including

leveling the material at site of work ,mixing and

spreading into grade and camber , watering and

consolidation at OMC with roller including cost

of material ,labour etc complete – GSB

89 Providing and laying spreading and 80.00 CMT 950.00

compacting machine crushed black trap

stone aggregate(53 mm to 22.4 mm at 30 %

crushed stone aggregate 22.4 mm to 2.36 mm

at 40% and below 2.36 mm at 30%), 150mm

thick Wet Mix Macadam in two layers the

material with water to OMC in mechanically mix

(pug mill) carriage of mix material by tipper to

site laying, spreading and compacting in sub

base, base course on well prepared under base

of compacting with roller to achieve the desired

density etc completed as directed by Engineer

in charge (Mechanically laid) WMM

90 Providing and Laying Controlled cement 73.00 CMT 6723.00

concrete M20 for trimix RCC road to require line,

level, slope including of

(1) Providing 125 micron polythene sheet at

base of concrete,

(2) Mixing approved quality polyester fibre

(12mm) @125 gm per bag or as per

manufacturer's specification during concreting

(3) Shuttering form work of M.S. C Channel

sections of required length & height as per

drawing including connection, bracing pins or

stake to require line, level, slope etc.

(4) Concreting compaction with using needle

Vibrator, Double beam screed vibrator

dewatering/Vacuum pump and finishing the

surface with Power Trowel Cum Floater

including any low or high spots shall be made

up by adding or removing concrete and

refinished to required line level and slope.

(5) Providing light brooming on the surface and

edging carefully finished with an edger of 6 mm

(6) Providing construction joint using Concrete

Groove Cutter machine of size 10 mm wide &

25 mm deep in transverse direction @ 4.5 M

C/C and sealing with approved quality grade B

bitumen sealant

(7) Providing Contraction (Dummy) joint using

Concrete Groove Cutter machine of size 5 mm

wide & 25 mm deep in Longitudinal direction

and sealing with approved quality grade B

bitumen sealant

(8) Providing expansion joints of size 25 mm

width and upto through depth of concrete using

25 mm thick Dura Board HD-100 of approved

quality and sealing 25x20 MM top with approved

quality bitumen sealant at 40 Meter C/C with

MM Dia P.V.C pipe cap filled with compressible

material for dowel bar. ( For 6m wide road

longitudinally at the centre expansion joint to be

The Item rate is including with all necessary

equipments, machinery, tools, tackles, Labours

& Pond / Jute bag Curing etc. complete as per

Drawing and as directed by E.I.C. (Minimum

cement content for Concrete is 370 Kg/Cmt &

Excluding the cost of reinforcement and Dowel

SCHEDULE B CIVIL- ( SECTION A )

Electrical Section B

SCHEDULE B - 1 : CONTROL ROOM

INDUSTRIAL ELECTRIFICATION

91 Providing and fixing of DBS as AC Panel - 1 for No 1 6738.00

CR of ISI marked Powder coated Pearl DBS of

ivory color , wall mounting, Double door

Distribution board of L&T, Heggar or higher

make fitted with 63Amp Phase Bus bar, Earth /

Neutral Bars and inter connecting wires with

removable bottom gland plates for all power

cable entry from bottom with DIN Channel

,incoming contact and 1No. - 63Amp TPN MCB

'C' Series, 6Nos. - 20A SP MCB 'C' Series and

13Nos. -10A SP MCB 'C' Series All MCBs are

L&T, Anchor or Higher make only. Complete in

all respect and as per instruction of EIC.

92 Supplying & laying of following size Control/L.T Mtr 120 175.00

power cable of FINOLEX or equivalent ISI make

in readymade cable trench or by excavating in

any type of soil cable trench size 300mm wide

and 600mm depth and refilling the same as per

the direction of EIC. Item Includes the cable

laying up to termination box with clamps &

proper clamping of cable on gantries by GI pipe

& glands as per direction. Item includes

providing & fixing of bricks, sand as per

requirement to protect cables . The L.T power

cable to be provided by contractor as under :As

per ISI 1554 (Part-I). 4 Core x 25 mm2

Aluminum cable -Armored, from LT panel board

(LTPB) to Yard Light AC MK (AC Panel-2)., AC

Panel 1 in C.R. and yard AC Box

93 Supplying & Laying Sub-main lines of 3X2.5 Rmtr 200 125.00

mm2 ( two for P & N and one for Earthing)

copper PVC insulated wier of ISI brand in

suitable standard make steel conduit pipe

having minimum 1.5 mm thickness of approved

brand with ISI brand with clmpes with it's

associated accessories for various circuits

amanating from AC panel 1.as per inst. of E.I.C.

94 Point wiring for control room tube lights, fans, Point 80 1298.00

exhaust fans, fency lights, water tight bulck

head lights with PVC insulated 660 V grade

standard copper wire in ISI make GI conduct

pipe 20 mm dia and 1.6 mm wall thickness size

fitted with sadles on the wall/ceiling. Size of wire

shall be with 3C x 1.5 sq.mm PVC insulated

copper wire for phase and neutral and earth wire

[ Green] and 5 Amp Anchor/Roma or any

equivalent switch as per specification with

guage M.S. box. The box shall be covered with

3 mm thick decorative mat finish hylum sheet.

The work is all inclusive of supply and fixing of

required materials as afore said [ like GI

conduct pipe , sadles , swithces , Steel box

ceiling Rose , flexible copper wire etc] to

complete point wiring with each fixture to be

earthed by SWG-12 stranded copper conductor

having green color as per direction and

instructions of E.I.C.

95 Providing, fixing & termination for Emergency Job 1 4492.00

D.C. supply arrangment. This job includs supply

& laying of 2C x 2.5 mm2 Copper arrmoured

cable from battery charger to SBDC, fixing &

providing SBDC & complete wiring with supply

of wire & D.C. lamp (110V D.C., 100 watt-4

Nos.) in standard steel conduit pipe as per inst.

96 Providing and Fixing points wiring in GI. Conduit Point 12 1213.00

size 20 mm dia and 1.6 mm wall thickness with

single PVC insulated 2.5 Sqmm. copper wire of

ISI standard good quality using 1.5mm thick

suitable size ISI mark Anchor brand 15 Amp.

250 Volt, 5-pin plug socket as seperate plug

point with shock proof accessories incl.

indication lamp; erected on separate decorative

mat finish hylum sheet board on wall with

providing adequate green earthing wire as per

specification and instruction of Engineer

97 ---- Do ---- as above but looped on same board Point 17 199.00

i.e. No separate board, plug socket for 5A

domestic use as per direction and instruction of

98 Providing & Fixing of 1200 mm Power Saver No 10 2916.00

Ceiling Fan 5 star rated CGL/ORIENT/USHA

make white colour with all required accessories

BLDC Technology, Power Consumption: 32 W,

RPM: 350. 3 year warranty. Fan is to be

purchased from authorised dealer.

Fan is to be purchased from authorised dealer.

Flexible wiring using twin core double PVC

48/0.2 mm copper flexible cord of suitable &

approved make and size from ceiling rose upto

fan terminal & supply and fixing of energy saver

regulators, extra GI pipe of required size and

length for lowering of fan if required as per

instruction of EIC.

99 Providing & Fixing of 50 W LED Lighting Fixture No 27 5059.00

(CGL Cat No. LCTLR-50-FO-CDL 50W or

equivalent under Cat-II or above as per R&B

SOR), 4-core 2.5mm2 double insulated flexible

strended wire should be used from control gear

fittings to approved SMC type junction box as

per inst. of EIC.

100 Providing and fixing of 41.5W LED Lighting No 4 3154.00

Fixture (CGL Cat No. LPFC-36-CDL 41.5W or

equivalent under Cat-II or above as per R&B

SOR) as per instruction of EIC.

101 Providing and fixing of 40W (1X4) LED Lighting No 4 3417.00

fixtures as per drawing (in office area & Porch

Area) (CGL Cat No. LCTLSN-40-CDL (1X4)

40W or equivalent under Cat-II or above as per

R&B SOR) as per instruction of EIC.

102 Providing & fixing of 30W LED Street Light No 7 2678.00

Bulkhead (CGL Cat No. LSTO-30-CDL 30W or

equivalent under Cat-II or above as per R&B

SOR) on out side C/R building and inside cable

trench in C/R including wiring from ceiling rose

to fixture with suitable size of PVC insulated ISI

marked copper wire only as per Instruction of

103 Providing and fixing of heavy duty exhaust fan No 2 3494.00

in battery room size 18" of Make

GEC/KHAITAN/ CROMPTON/ BAJAJ incl. M.S.

louver shutter of Fan & necessary wall finishing

works and applying bird proof net on outside

wall with required arrangement for rain water

sealing and necessary conection from ceiling

rose as per Direction and instruction of EIC.

104 Providing & Fixing of Electric bell with bell switch No 1 149.00

near officer's table. All materials must be ISI

mark and approved by EIC.

105 Providing and fixing of 18W LED Lighting No 6 1281.00

Fixture (CGL Cat No.. LCTL-18-CDL 18W or

equivalent under Cat-II or above as per R&B

SOR) as per instruction of EIC

106 Providing & Fixing of G.I. 1.5Mtr Long, 16MM No 4 141.00

Dia Lightning Rod (Spike) for Lightning

Protection of Control Room Buiding as per

Instruction of EIC as shown in Drawing No..

GETCO/E/STD/DSLP-66kV CR- R0 Dtd.

107 Providing & fixing of 50x6 mm GI Flat for Control RMtr 110 296.00

Room DSLP Protection. The work is to be

carried out as per Drg. No.. GETCO/E/STD/

DLSP-66kV CR, R0 dated:26.10.17 as per inst.

of EIC. The rates are including fixing of clamps

on wall which is to be fabricated from 50X6 GI

Strip. (GI Strip will be supplied by GETCO Free

108 (a) Supply,Installation,Testing and No 2 14844.00

commissioning of maintenance free treated

earth electrodes suitable for Rocky Soil as per

drawing No. GETCO/E/STD/P-021 (2 OF 2) R3

dated 29-05-2020 and technical specifications

GETCO/E/TS-Maintenance free earth pits/R1

dated 04-06-15 for 66/11 kV substations with

ground enhancement material/ back fill /

grounding compound as per IEEE 80-2000

Clause 14.5 (d) and as per part-7 of IEC-62561

Using Copper bonded earth electrode (with

micron copper coating) having 24 mm dia (min)

and 3000 mm length which shall be capable of

handling STC of 25 KA-1 sec. Work also

includes Providing BB masonary inspection

chamber(manhole) incl. light type CI cover.

109 Providing & fixing of Wall Mounted Fan No 1 1597.00

Crompton / Orient/ PSPO / Usha / Cinni (must

be ISI approved). including wiring from ceiling

rose to Fan terminals of by using twin core

flexible PVC to PVC 48 / 0.2 mm copper cord

of suitable & approved size & fixing of Fan

110 Providing & fixing of all weather proof, cold No 1 24732.00

rolled sheet steel AC Panel - 2 for Yard-Light

AC supply having

(1) 63A 4P MCB : 01 No.

(2) MCX-12A contactor : 01 No.

(3) Digital Timer : 01 No.

(4) 20A TPN MCB : 06 Nos

(5) Indication lamp " 03 Nos

(6) Push Butten : 02 Nos

(7) Terminal Connector as per site requierment

and other detail as per drawing enclosed

including grouting & Necessary fabrication of GI

Angle or fixing on GI Structure, including

earthing with main grid as per instruction of EIC.

111 Providing & fixing of all weather proof, cold No 1 20650.00

rolled steel sheet floor mounted fixed type

single door grey color Main AC Dist box having

size 900x600x250 MM with door closing

arrangement and necessary rubber gasket.

Contractor has to supply following materials

with box along with necessary mounting and

(1) L&T/Anchor/Havells Make 100A,4P MCCB -

(2) L&T/Anchor/Havells Make 63A,4P MCB -

(3) 100 A Copper Bus-Bar Link - length 6 inch

size & 25 x 3 MM - 4 Nos.

(4) Tinned Earth Bus 25 x 3 MM Length -

(5) 25 & 16 sqmm Cu. flexible cable - 4 &

Meter respectively.

(6) Required Nos. of Cu. Lugs , etc. as per

instruction of EIC.

112 Supplying & laying of following size Control/ L.T. Mtr 60 292.00

power cable in readymade cable trench or by

excavating in any type of soil cable trench size

300mm wide 600mm depth and refilling the

same as per the direction of EIC. Item Includes

the cable laying upto termination box with

clamps & proper clamping of cable on gantries

by GI pipe & glands as per direction. Item

includes providing & supply of bircks, sand as

per requirement. The L.T power cable to be

provided by contractor as under :As per ISI

(Part-I). 3.5 Core x 50 mm2 Alluminium cable -

Armoured, from distribution X'mer to Main

Distribution Board near dist. X'mer and from

MDB to indoor LT panel board (LTPB) - both

113 Providing and fixing of ISI mark Rubber Matting SQMTR 24 4492.00

sheet Suitable for 11kV Class As per following

Reference IS:15652-2006 with latest

Suitable for Voltage Class :B

Max Use Voltage : 11kV

AC proof voltage : 22kV

Dielectric strength : 45kV

Leakage current : < 10 micro ampere

Make : Vardhman or equivelent ( Rubberhouse

Thickness :2.5 mm.

Surface :Chequred on one side and other side

Contractor has to supply Rubber Matting sheet

as per IS:15652-2006 with latest amendment

specification and shall submit test certificate for

routine test as per relevant IS

114 Supply of 100W LED Flood light, Rating 100 W, No 10 1120.00

Operating voltage 120-280 V AC 50Hz , light

output 10000Lm, Body : Alluminium Die Cast,

Warrenty 2 Year, make (ISI approved).

115 Providing & Fixing of Aquaguard Total Reviva No 1 6889.00

Water R.O. Plant including Commissioning &

Testing and also with required peripherals for

installation of plant as per site condition

(1) Dimension: 320 X 275 X 410 mm

(2) Weight : 8 KG

(3) Water flow : 8 to 12 LPH

(4) Input power : 230V AC

(5) RO membrence : TFC spiral

You have to provide guarantee for the 12 month

from the installation.

116 Supply of "A" Table size 5' x 3' x 2.5' (feet) No. 1 16350.00

Laminated Top with 2 No. Drawer, 2 No.

Cabinet and Apron (W-18)

117 Supply of Computer Table of size 4' x 2' x 2.5' No. 1 12045.00

(feet) with Keyboard, Drawer and Cabinet. (W-

118 Supply of revolving chair, medium hydraulic No. 1 10580.00

foam with rubber handle (S-14)

119 Supply of Office Chair "A Type" seat with Back No. 3 3900.00

Tapestry Cushion (S-5)

120 Supply of Steel cup board 20 gauge of size 78" No. 2 15150.00

x 36" x 18" (inch) with 4 No. partition and Safe

121 Supply of Big Steel rack of size 3' x 1.25, x 6.25' No. 2 6800.00

(feet) with 6 No. of partitions (S-33)

TOTAL ESTIMATED COST FOR CIVIL

Welfare cess 1%

Total estimated cost

Scrap recovery of dismentling items of Rs.

78361.00 (inclusive of all taxes) will be deducted

from 1st RA Bill of the work.

NOTE: (1) Please note that change in commercial terms & conditions in (i) Section-A ”Instruction to Bidders” , (ii)

Section-C (Conditions of Contract), Caluse No.3 (Compensation for the delay) and clause No.6 (Action on default

by contractor) and (iii) Section-D (General Condition of Contract), Clause-37 (Rights of Owner), Clause-38

(Relationship with employee) and clause-39 (Conflict of Interest among Bidder/Agents)

Supt Engineer (TR),

GETCO: Circle Office, Jamnagar.

I/We have read and clearly understood the terms, conditions, Schedule ‘B’ and Technical specifications put by

GETCO on WEB site.

I/We hereby accept all the conditions and specifications of this tender document, and accordingly, I/We am/are

willing to carry out the work at _________________% (in words ______________percentage) above/below the

estimated cost. Accordingly the total amount of my/our tender works out to Rs.____________________

estimated cost. Accordingly the total amount of my/our tender works out to Rs.____________________

SIGNATURE OF CONTRACTOR.

(With rubber stamp/seal of the company)