Engineering, Procurement and Construction (EPC) Work for Designing and Construction of Ged Barrage, Protection work & Other allied activities across river Sabarmati between Hirpura barrage & Lakroda weir, Ta. Prantij, Dist. Sabarkantha including Operation and Maintenance for 10 Years.

Name of Work: Engineering, Procurement and Construction (EPC) Work for Designing and

Construction of Ged Barrage, Protection work & Other allied activities

across river Sabarmati between Hirpura barrage & Lakroda weir, Ta.

Prantij, Dist. Sabarkantha including Operation

Cost put to Tender 341,08,21,574.00/-

DRAWINGS (TYPICAL)

OFFICE OF THE SUPERINTENDING ENGINEER

AHMEDABAD IRRIGATION PROJECT CIRCLE

A-BLOCK, 9TH FLOOR, BAHUMALI BHAVAN

VASTRAPUR, AHMEDABAD – 380052. (PHONE: 079-27912505)

GED BARRAGE VOLUME-IV (ENCLOSURE-II) DRAWING (TYPICAL)

LIST OF TENDER DOCUMENTS

SR. VOLUME NO. PART DESCRIPTION

Invitation for Bid (IFB)

Section -1 Instructions to Bidders

1. VOLUME - I Section -2 Qualification Information

Section -3 Conditions of Contract

Section -4 Contract Data

Section -5 Technical Specifications-

Civil Works (General)

Section -5 Technical Specifications-

PART-A Civil Works (Particular)

Section -5 Technical Specifications-

2. VOLUME - II Civil Works (Design Requirements)

PART-B Section -5 Technical Specifications-Mechanical

Section -5 Technical Specifications-Electrical

Section -5 Technical Specifications-Operation &

Maintenance Works

- Section -6 Form of Bid

3. VOLUME - III Section -7 Bill of Quantities

(Separately Attached as Enclosure-III)

Section -8 Securities and Other Forms

- Section – 9 Drawings (Typical)

(Separately Attached As Enclosure-II)

Section -10 Documents to Be Furnished by Bidder

5. VOLUME - V Section -11 Project Related Conditions and Scope

Enclosure-I Technical Specifications

(Part-A, B, C, D)

ENCLOSURES Enclosure-II Drawings (Typical)

Enclosure-III Bill of Quantities

(Price Bid and Payment Schedule)

GED BARRAGE VOLUME-IV (ENCLOSURE-II) DRAWING (TYPICAL)

INTRODUCTION AND CONDITIONS:

The volume contains drawings for having basic ideas about structure to be designed and to be

constructed by bidder. These drawings (Typical) were prepared for Construction of Ambod

(madhavgadh) barrage which is approx 27.00 km D/S from proposed Ged barrage. The

Design and drawings were prepared by Central Design Organization, Gandhinagar

NWRWS&KD based on data available and basic information. The EPC contractor must

conduct its own survey, geo-tech investigations, Hydrological studies and furnish its own

design to withstand design flood/check flood and duly vetted. The drawings contain various

components of barrage like: Spillway, Piers, Raft, Abutments, Sidewalls, Cutoffs, Foundation

Details, Launching apron, Protection work for banks etc. The bidder should get basic ideas of the

structure using the drawings and furnish design accordingly.

The design, drawing, sketches, narrations, etc. mentioned in the tender is showing the

NWRWS&KD requirement in respect to size, shape, levels, type and nature of work etc. and is

indicative and it is only for the guidance to the agency. The Agency has to submit his own

survey, design required for the work and is required to be got vetted from the institutions

approved by EIC and the agency has to carry out the work after getting procedure of approval as

decided by the NWRWS&KD.

The contractor shall have to design the proposed structure and its components as per relevant

Indian Standards and provide norms/methods and guidelines provided by of Central Design

Organization, NWRWS&KD, Central water commission (CWC), Central Board of Irrigation

and Power(CBIP), CWPRS and Indian standards.

NOTE: DRAWINGS UNDER THIS VOLUME ARE ONLY FOR KNOWLEDGE

PURPOSE, THE BIDDER MUST DESIGN GED BARRAGE AND ITS COMPONENTS

BY HIMSELF AND THE DESIGN MUST BE SUCH THAT STRUCTURE SHOULD

WITHSTAND UNDER ALL ADVERSE CONDITIONS THAT MAY OCCUR AND

MUST FULFILL ALL THE CRITERIA FOR DESIGN FLOOD TO BE PASS EASILY

THROUGH GATE OPERATIONS WITHOUT ANY DAMAGES TO THE STRUCTURE

AND OTHER REQUIREMENTS. ANY MODIFICATIONS SUGGESTED BY

ENGINEER-IN-CHARGE AND/OR APPROVAL AUTHORITY AS PER TENDER

CONDITION MUST BE INCORPORATED BY CONTRACTOR AT THE TIME OF

APPROVAL OF DRAWINGS. THE CONTRACTOR MUST TAKE CARE THAT

THESE DRAWINGS MAY NOT BE USED FOR ANY OTHER PURPOSE. ANY CLAIM

BASED ON THESE DESIGNS WILL BE STRAIGHT AWAY REJECTED AS THESE

DRAWINGS ARE ONLY FOR KNOWLEDGE PUPOSE.

GED BARRAGE VOLUME-IV (ENCLOSURE-II) DRAWING (TYPICAL)

GED BARRAGE VOLUME-IV (ENCLOSURE-II) DRAWING (TYPICAL)

GED BARRAGE VOLUME-IV (ENCLOSURE-II) DRAWING (TYPICAL)

GED BARRAGE VOLUME-IV (ENCLOSURE-II) DRAWING (TYPICAL)