C.O balance work Trauma Centre in MGMSC Hospital at Khaneri in Tehsil Rampur Distt. Shimla H.P.

Amount

Brick work using common burnt clay building bricks in superstructure above plinth upto all floor levels using 2nd class building bricks in Cement Mortar 1:6. (1 cement :6 sand) and curing complete including carriage of material within all leads and lifts through all modes of transportation and as per HP.PWD. Specification of 1990 volume-I and as per direction of Engineer-in-Charge.

Half brick masonry in common burnt clay building bricks in super structure above plinth level upto all floor levels using 2nd class building bricks in cement mortor 1:4(one cement: four sand) curing complete including carriage of material within all leads and lifts through all modes of transportation and as per HP.PWD. Specification of 1990 volume-I and as per direction of Engineer-in-Charge

Providing and fixing First class deodar wood frames of doors, windows ,clerestory, windows and other frames wrought,framed and fixed in position including carriage of material within all leads and lifts through all modes of transportation and as per HP.PWD. Specification of 1990 volume-I and as per direction of Engineer-in-Charge

Providing and fixing 40 mm ( forty millimetre) thick 2nd (second ) class Deodar wood panelled glazed or panelled and glazed shutters for doors windows and clerestory windows. Including black enamelled iron butt hinges with necessary screws. including carriage of material within all leads and lifts through all modes of transportation and as per HP.PWD. Specification of 1990 volume-I and as per direction of Engineer-in-Charge

Providing and fixing 40mm (forty milimetre) thick 2nd (second ) class deodar wood wire gauge shutters using galvanized M.S wire gauge of I.S. gauge designation 85G with wire of dia 0.56mm (zero point five six ) for door windows and clerestory windows including bright finished black enameled iron hinges with necessary screws including carriage of material within all leads and lifts through all modes of transportation and as per HP.PWD. Specification of 1990 volume-I and as per direction of Engineer-in-Charge

Providing and fixing M.S.grill of required patterns in wooden frames of windows etc. with M.S.flat, square bars or round bars with round headed bolts and nuts or by screws including carriage of material within all leads and lifts through all modes of transportation and as per HP.PWD. Specification of 1990 volume-I and as per direction of Engineer-in-Charge

Providing 40x3 mm( Forty into three) millimetreflat iron hold fast 40mm.( Forty millimetre) Long including fixing to frame with 10m diameter bolts nuts and wooden plugs and embeding in cement concrete block 30x10x15cm. 1:3:6 (1 cement : 3 sand : 6 graded stone aggregate 20mm nominal size) including carriage of material within all leads and lifts through all modes of transportation and as per HP.PWD. Specification of 1990 volume-I and as per direction of Engineer-in-Charge

P/F 12 mm (Twelve millimetre) thick prelaminated board water proof shutter for cup board including fixing with nickle plated piano hinges with screws etc. complete including carriage of material within all leads and lifts through all modes of transportation and as per HP.PWD. Specification of 1990 volume-I and as per direction of Engineer-in-Charge

P/F 19 mm (Ninteen millimetre) thick Commercial board both side bwp phenol bonded exterior/ interior grade shutters with frame of 1st class deodar wood for cup board including nickel plated bright finished piano hinges 25mm (Twenty five millimetre) thick frame including carriage of material within all leads and lifts through all modes of transportation and as per HP.PWD. Specification of 1990 volume-I and as per direction of Engineer-in-Charge

Providing and fixing 19mm (Ninteen millimetre) thick water proof commercial board in shelves/box for cup board with butt joints & fixing with nails & screws etc. including carriage of material within all leads and lifts through all modes of transportation and as per HP.PWD. Specification of 1990 volume-I and as per direction of Engineer-in-Charge

Providing and fixing palin square edged cover fillets (beading) 60mm x12mm section with wood screws in ceiling and lining including mitring at junction including carriage of material within all leads and lifts through all modes of transportation and as per HP.PWD. Specification of 1990 volume-I and as per direction of Engineer-in-Charge

Providing and fixing1.00 mm ( One millimetre) thick coloured and plain lamination sheet (sunmica)on boards /ply wood sheets with approved adhesive and nails etc. including carriage of material within all leads and lifts through all modes of transportation and as per HP.PWD. Specification of 1990 volume-I and as per direction of Engineer-in-Charge

Providing and fixing bright finished brass furniture handles including carriage of material within all leads and lifts through all modes of transportation and as per HP.PWD. Specification of 1990 volume-I and as per direction of Engineer-in-Charge

Providing and fixing anodized aluminium sliding door bolt anodized colour and shade with bolts and nuts screws etc. complete including carriage of material within all leads and lifts through all modes of transportation and as per HP.PWD. Specification of 1990 volume-I and as per direction of Engineer-in-Charge 300 x 16mm ( Three hundred into sixteen millimetres).

250 x 16mm (Two hundred fifty into sixteen millimetres).

Providing and fixing aluminium tower bolts (berrel type) anodized trans parent or dyed to required shade and colour with screws etc. complete including carriage of material within all leads and lifts through all modes of transportation and as per HP.PWD. Specification of 1990 volume-I and as per direction of Engineer-in-Charge. 250 x 10mm (Two hundred fifty into ten millimetres).

200 x 10mm (Two hundred into ten millimetres).

Providing and fixing aluminium handles anodized transparent or dyed to required colour shade with necessary screws etc. complete including carriage of material within all leads and lifts through all modes of transportation and as per HP.PWD. Specification of 1990 volume-I and as per direction of Engineer-in-Charge. 125mm (One hundred twenty five millimetres).

100mm (One hundred millimetres).

Providing and fixing . 250 mm(Two hundred fifty imillimetres). oxidized M.S. hooks and eyesincluding carriage of material within all leads and lifts through all modes of transportation and as per HP.PWD. Specification of 1990 volume-I and as per direction of Engineer-in-Charge

Providing and fixing Hilux Calcium silicate board 12 mm thick in ceiling of superior quality / make including frame work of G.I Steel Sections Comprising G.I Steel Parameter, G.I Steel Enter & G.I Steel Main Sections fixed with G.I Hangers including fixing with necessary fittings such as revits / screws as required complete in all respect as per direction Engineer - in - charge.

P/F 6 mm (Six millimetre) thick Everest board ceiling (595x595mm)cascade in powder coated G.I frame work fixed with wall or ceiling etc with specified claps and equil plugs.including carriage of material within all leads and lifts through all modes of transportation and as per HP.PWD. Specification of 1990 volume-I and as per direction of Engineer-in-Charge

Providing and fixing 1st class deodar wood 25mm + 25mm balusters 25mmx25mm square wrought fixed with ends housed (square or splay) to hand rails and treads or strings complete in. 1st class deodar wood including carriage of material within all leads and lifts through all modes of transportation and as per HP.PWD. Specification of 1990 volume-I and as per direction of Engineer-in-Charge

Providing and fixing 2nd class deodar wood 75 mm x 60mm ( seventy five into sixty millimetre) rounded hand rails in straight length complete including carriage of material within all leads and lifts through all modes of transportation and as per HP.PWD. Specification of 1990 volume-I and as per direction of Engineer-in-Charge

Providing and laying 60mm (sixty millimertes) thick heavy duty precast cement conrete inter locking paver blocks vibro compacted upto M-50 grade i/c border or kurb block grey orcoloured over sub-base of concrete with 25mm thick average thickness of cement mortar 1:4 (1 cement : 4 sand) laid over and jointed with neat cement slurry mixed with pigment to match the shade of blocks i/c curing rubbing & polishing complete (Sub base concrete floor to be paid for separately) including carriage of material within all leads and lifts through all modes of transportation and as per HP.PWD. Specification of 1990 volume-I and as per direction of Engineer-in-Charge

Providing and laying granite stone in flooring 20mm (twenty millimetres) average thickness base of cement mortar 1:3 (1cement : 3 sand) laid over and jointed with grey cement slurry mixed with pigment to match the shade of granite stone i/c rubbing and polishing complete. 20mm.thick. including carriage of material within all leads and lifts through all modes of transportation and as per HP.PWD. Specification of 1990 volume-I and as per direction of Engineer-in-Charge

Providing and fixing 2mm thick seam less anti dissipative homogenious VIP conductiveesd control vinyl flooring of size 600x600mm of approved color of its equivalent with polyurethane conductive adhesive . The joints of the floor shall be given Ushaped groove with grooving machine to insert welding bars. The tile joints shall be welded by heat fusion product get seam less floor .The projected welding bars shall be trimmed with Crescent Shaped knife and attached sledge so that it would flush with flooring. The edge of the skirting shall be sealed with selant of approved make, copper rounding strips 0.5mm thick and 25mm wide shall be laid in the floor below in the adhesive in the border and crossed junction and connected to copper wiring of grounding. The tile flooring should have an Electrical resistance of 2.5x10 to 25x10 ohms as per din 51953 STMF so OR NEPA 99B1 class of fire resistance and should meet UL standarad 779 standarad for electrically conductive floors. including carriage of material within all leads and lifts through all modes of transportation and as per HP.PWD. Specification of 1990 volume-I and as per direction of Engineer-in-Charge

Providing and fixing 10mm ( Ten millimetres)thick anti skid water proof stain and impect resistent heavy duty vetrified tiles Nitco or equivalant 600 x 600mm x 10mm manufactured of approved shade and colour in flooring, treads of steps and landings laid over 12mm thick cement mortar 1:3 (1 cement : 3 sand) jointed with cement slurry mixed with pigment to match the shade of tiles as required complete including carriage of material within all leads and lifts through all modes of transportation and as per HP.PWD. Specification of 1990 volume-I and as per direction of Engineer-in-Charge

Providing and fixing Garsa (Kullu) stone slab 12.5mm (Twelve point five millimetres )cladding on R.C.C.surface side as on faces of Arch masonry walls etc.on 12mm. Thick cement plaster 1:3 (1cement:3sand) and jointed with cement slurry i/c scaffolding etc. complete including carriage of material within all leads and lifts through all modes of transportation and as per HP.PWD. Specification of 1990 volume-I and as per direction of Engineer-in-Charge

Providing and laying 40mm (Forty millimetres) thick Cement concrete flooring 1:2:4 (1 cement : 2 sand:4 Crushed stone aggregate 20 mm nominal size) laid in one layer finished with a floating coat of neat Cement. including carriage of material within all leads and lifts through all modes of transportation and as per HP.PWD. Specification of 1990 volume-I and as per direction of Engineer-in-Charge.

Providing and fixing 0.60mm ( Zero point six centimetre) thick prepainted steel sheet in roofing with hot dipped metallic zinc coated sheet with top coat of regular modified polyster (RNP) organic coating of 20 (Twenty)microns over 5(Five) microns primer coating to back coat of polyster of 5(Five) microns over 5(Five) microns primer coating i/c fixing with prepainted iron J or L hooks, bolts and nuts 6mm dia metre with prepainted limpet and rubber washers complete with all accesoriees as required including carriage of material within all leads and lifts through all modes of transportation and as per HP.PWD. Specification of 1990 volume-I and as per direction of Engineer-in-Charge

Providing and fixing ridges or hips 60cm (sixty centimetre) having proper gola with overall in plain with 0.60mm (sixty millimetre) thick prepainted steel hot dip metallic zinc coated sheets with the top coat of regular polyester modified (RMP) organic coating of 20 (Twenty) microns over 5 (Five) microns primer coating+ back coat of polyester of 5 (Five) microns over 5 (Five) microns primer coating including fixing J or L hooks bolts and nuts 6mm dia G.I. limpet and bitumen washer complete including carriage of material within all leads and lifts through all modes of transportation and as per HP.PWD. Specification of 1990 volume-I and as per direction of Engineer-in-Charge

Providing and fixing valleys 90cm (ninety centimetre) over all in pre-painted sheet galvanised steel hot dip metallic zinc coated sheets with the top coat of regular modified polyester (RMP) organic coating of 20 (Twenty) microns over 5 (Five) microns runner+back coat of polyester of 5 (Five) microns over 5 (Five) microns primer coating fixed with J or L hookes bolts and nuts 6mm dia G.I. limpet and bitumen washer complete including carriage of material within all leads and lifts through all modes of transportation and as per HP.PWD. Specification of 1990 volume-I and as per direction of Engineer-in-Charge

Providing and fixing 0.80mm (Zero point eight millimetres) thick 15 cm. wide 45 cm. overall semicircular plain G.I. sheetgutter with iron brackets 40x3mm size bolts and nuts and washers etc. including making necessary conections with rain water pipe complete as per design. including carriage of material within all leads and lifts through all modes of transportation and as per HP.PWD. Specification of 1990 volume-I and as per direction of Engineer-in-Charge

Providing and fixing on wall face PVC (D-Plast)150mm ( One hundred fifty millimetres) dia rain water pipes of working pressure not less than 4.5kg/sq. cm (four point five killo gramme per squarecentimeter) including filling the joints with approved adhesive complete. including carriage of material within all leads and lifts through all modes of transportation and as per HP.PWD. Specification of 1990 volume-I and as per direction of Engineer-in-Charge.

Providing and fixing on wall faces PVC (D-Plast) PVC plain bend 150mm dia for rain water pipes including filling the joints with approved adhesive complete including carriage of material within all leads and lifts through all modes of transportation and as per HP.PWD. Specification of 1990 volume-I and as per direction of Engineer-in-Charge

Providing and fixing 150mm ( One hundred fifty millimetres) diametre M.S.holder bat clamps of approved design to C.I. or S.C.I pipes embeded in and including cement concrete blocks 10 x10x10 cm of 1:2:4:mix (1 cement 2 sand 4 stone graded stone aggregate 20 mm nominal size) and cost of cutting holes and making good the wall etc. for C.I. pipe complete including carriage of material within all leads and lifts through all modes of transportation and as per HP.PWD. Specification of 1990 volume-I and as per direction of Engineer-in-Charge.

Providing and fixing M.S. BP Sheet 2.00 mm ( Two millimetres) thick in eaves board/facia/soffits/ceiling including cutting, fixing and welding to steel roof members and applying a coat of red lead primer complete as per the instruction of Engineer-in-charge (Base members of steel work shall be measured & paid separtely) complete including carriage of material within all leads and lifts through all modes of transportation and as per HP.PWD. Specification of 1990 volume-I and as per direction of Engineer-in-Charge

Steel work welded in built up sections, trusses and framed work, including cutting,hoisting , fixing in position and applying a priming coat of red lead paint In trusses and trussed purlines in buildings including carriage with in all leads and lifts and as per HP.PWD. specifications of 1990 volume-I and as per direction of Engineer-in-charge.

Steel work welded in built up sections, trusses and framed work, including cutting,hoisting , fixing in position and applying a priming coat of red lead paint . In gratings framed guard bars,ladders,railling,brackets and similar works including carriage with in all leads and lifts and as per HP.PWD. specifications of 1990 volume-I and as per direction of Engineer-in-charge.

Providing and fixing in position collapsible steel shutters with vertical channels 20 mm X10 mmX 2mm and braced with flat iron diagonals 20 mm X5 mm size with top and bottom rails of T.iron 40 mm X40 mm X6 mm with 38 mm dia steel pulley complete with bolts and nuts locking arrangements, stoppers, handles, including applying a priming coat of red lead paint including carriage with in all leads and lifts and as per HP.PWD. specifications of 1990 volume-I and as per direction of Engineer-in-charge.

Applying priming coat over new wood and wood based surfaces after and including prepering the surface by thoroughly cleaning oil,grease,dirt and other foreign matters sand papering and knotting. Readymixed paint brushing wood primer pink including carriage with in all leads and lifts and as per HP.PWD. specifications of 1990 volume-I and as per direction of Engineer-in-charge.

Painting two coats (excluding priming coat)on new wood and wood based surfaces,with readymixed paint,brushing to give an even shade including cleaning of all dirt,dust and other foreign matter sand papering and stopping:-- With white paint including carriage with in all leads and lifts and as per HP.PWD. specifications of 1990 volume-I and as per direction of Engineer-in-charge.

Painting two coats (excluding priming coat) on new steel and other metal surface under coat with ready mixed paint brushing to give an even shade including cleaning the surfaces of all dirt dust and other foreign matter with ready mixed paint other than white .

15mm ( Fifteen millimetres) cement thick plaster in single coat on rough side of brick masonry/stone masonry/concrete walls for interior plastering upto floor all level including arrises, internal rounded angles, chamfers and/or rounded angles not exceeding 80mm in girth and finished even and smooth in cement mortar 1:6.(one cement: six sand) including carriage of material within all leads and lifts through all modes of transportation and as per HP.PWD. Specification of 1990 volume-I and as per direction of Engineer-in-Charge

Wall painting (two coats) shall be finished with antibacterial ,dust resistant washable emulsion paint of approved shde such as ceerami freshin of Siddhika coating or its equivalent . The surface shall be prepared and antivecterial paint shall be applied strictly as per the specfication of the manufacturer including carriage of material within all leads and lifts through all modes of transportation and as per HP.PWD. Specification of 1990 volume-I and as per direction of Engineer-in-Charge

Painting two coats (excluding priming coat)on new concrete /masonry/ plastered surfaces with enamel paint of approved brand and manufacture for use on floors to give an even shade,includingcleaning of all dirt,dust and other foreign matter and sand papering as required including carriage of material within all leads and lifts through all modes of transportation and as per HP.PWD. Specification of 1990 volume-I and as per direction of Engineer-in-Charge

Distempering (two coats) with oil bound washable distemper of approved brand and manufacture and of required shade on undecorated wall surfaces to give an even shade over and including a priming coat with distemper primer of approved brand and manufacture after thoroughly brushing the surface free from mortar droppings and other foreign matter and also including preparing the surface even and sand papered smooth including carriage of material within all leads and lifts through all modes of transportation and as per HP.PWD. Specification of 1990 volume-I and as per direction of Engineer-in-Charge

Wall painting (two coats) with acrylic emulsion paint of approved brand and manufacture for interior grade on undecorated ncrete/ stone /plastered wall surfaces to give an even shade including thoroughly brushing the surface free from mortar dropping and other foreign matter and sand papered smooth including applying of putty a required for metling the surface complete including carriage of material within all leads and lifts through all modes of transportation and as per HP.PWD. Specification of 1990 volume-I and as per direction of Engineer-in-Charge

Applying Birla white wall care putty over plaster surface afterthoroughly brushing the surface free from mortar drops, dust,loose materials and other foreign matters sand papered smooth to give final matter finish to the surface complete including carriage of material within all leads and lifts through all modes of transportation and as per HP.PWD. Specification of 1990 volume-I and as per direction of Engineer-in-Charge

Providing under layer for plinth protection of 75mm thick ( Seventy fine millimetres) un-consolidated) bed of dry brick/ stone aggregate 40mm nominal size with rammed and consolidated and grouted with fine sand including preparation of ground including carriage of material within all leads and lifts through all modes of transportation and as per HP.PWD. Specification of 1990 volume-I and as per direction of Engineer-in-Charge

Providing plinth protection 50mm (Fifty millimetres) thick in cement concrete 1:3:6 (1cement:3sand: 6graded stone aggregate 20mm nominal size) including finishing the top surface of concrete smooth including carriage of material within all leads and lifts through all modes of transportation and as per HP.PWD. Specification of 1990 volume-I and as per direction of Engineer-in-Charge.

Constructing course rubble hammer dressed “U” shape open surface drain with side walls 15x23cm in cement mortar 1:6 (1cement :6sand) and inside plastering with cement plaster 1:3 (1cement:3sand) including e`arth work and laying 10cm cement concrete in 1:5:10 (1cement :10 graded stone aggregate 40mm nominal size) and 7.5 cm cement concrete 1:2:4 (1cement:2sand: 4graded stone aggregate 20mm nominal size) and finished with a floating coat of neat cement complete as per standard design including carriage of material within all leads and lifts through all modes of transportation and as per HP.PWD. Specification of 1990 volume-I and as per direction of Engineer-in-Charge

Providing and fixing vitreous china wash down, water closet squatting pan (European type W.C. pan) with intergal 'P' or 'S' trap including jointing the trap with soil pipe in cement mortar 1:1 (1cement :1sand )(seat and cover to be measured and paid for separately).Anglo indian Universal closet.European seat (PRIMA )No. 2090 of CERA of its equivalent. including carriage of material within all leads and lifts through all modes of transportation and as per HP.PWD. Specification of 1990 volume-I and as per direction of Engineer-in-Charge

Providing and fixing vitreous china wash down, water closet (Europeon type W.C. pan) with intergal 'P' or 'S' trap including jointing the trap with soil pipe in cement mortar 1:1 (1cement :1sand )(sheet and cover to be measured and paid for separately) ordinary closet curing complete. including carriage of material within all leads and lifts through all modes of transportation and as per HP.PWD. Specification of 1990 volume-I and as per direction of Engineer-in-Charge

Providing and fixing plastic seat (Solid/Hollow type) and cover for wash down water closet with C.P. Brass hinges and rubber buffers:1 SOLID TYPE white plastic seat and cover including carriage of material within all leads and lifts through all modes of transportation and as per HP.PWD. Specification of 1990 volume-I and as per direction of Engineer-in-Charge

Providing and fixing viterous China wash basin with single hole for pillar tape with C.I. or M.S. brackets painted white including cutting holes and making good the same but excluding fittings i)Flat back type of size 550mmx400mm.No. 1025(CLAIR)of size 550mmx400mm of CERA or its equivalent. including carriage of material within all leads and lifts through all modes of transportation and as per HP.PWD. Specification of 1990 volume-I and as per direction of Engineer-in-Charge

Providing and fixing viterous China Pedestal for wash basin complete recessed at the back for the reception of pipes and fittings. including carriage of material within all leads and lifts through all modes of transportation and as per HP.PWD. Specification of 1990 volume-I and as per direction of Engineer-in-Charge

Providing and fixing G.I. inlet connection for flush pipe with W.C.pan. including carriage of material within all leads and lifts through all modes of transportation and as per HP.PWD. Specification of 1990 volume-I and as per direction of Engineer-in-Charge

PTMT Coloured / white high density polyethylene / poly propylene 10 litres capacity ( full flush) European standard control low level flushing cistern with fittings including carriage of material within all leads and lifts and as per HP.PWD., specifications of 1990 volume-I and as per direction of Engineer-in-Charge.

Providing and fixing rubber plug for sink/wash basin.i)32mm dia including carriage of material within all leads and lifts through all modes of transportation and as per HP.PWD. Specification of 1990 volume-I and as per direction of Engineer-in-Charge

Providing and fixing C.P. Bras waste for wash basin/sink.i)32mm dia including carriage of material within all leads and lifts through all modes of transportation and as per HP.PWD. Specification of 1990 volume-I and as per direction of Engineer-in-Charge

Providing and fixing M.I.union for wash basin or sink :- 32 mm dia including carriage of material within all leads and lifts through all modes of transportation and as per HP.PWD. Specification of 1990 volume-I and as per direction of Engineer-in-Charge

Providing and fixing 100 mm cromium plated grating for gully, floor or Nahni trap including carriage of material within all leads and lifts through all modes of transportation and as per HP.PWD. Specification of 1990 volume-I and as per direction of Engineer-in-Charge

Providing and fixing 600 mm x 450 mm bevelled edge mirror of superior glass mounted on 6 mm thick A.C. Sheet or plywood sheet and fixed to wooden plugs with C.P. Brass screws and washers. including carriage of material within all leads and lifts through all modes of transportation and as per HP.PWD. Specification of 1990 volume-I and as per direction of Engineer-in-Charge

Providing and fixing C.P. Brass Towel rail complete with C.P. Brass brackets fixed to wooden plugs with C.P. Brass screws and washers. 600 mm x 20 mm including carriage of material within all leads and lifts through all modes of transportation and as per HP.PWD. Specification of 1990 volume-I and as per direction of Engineer-in-Charge

Providing and fixing 600 mm x 120 mm glass shelf with C.P. Brass brackets and gaurd rail complete.fixed to wooden plugs with C.P.Brass screws. including carriage of material within all leads and lifts through all modes of transportation and as per HP.PWD. Specification of 1990 volume-I and as per direction of Engineer-in-Charge

Providing and fixing chromium plated brass soap dish with C.P. Brass brackets fixed to wooden cleats with C.P. Brass screws. including carriage of material within all leads and lifts through all modes of transportation and as per HP.PWD. Specification of 1990 volume-I and as per direction of Engineer-in-Charge

Providing and fixing C.P. Brass bib tap with Capstan head :- 15 mm dia including carriage of material within all leads and lifts through all modes of transportation and as per HP.PWD. Specification of 1990 volume-I and as per direction of Engineer-in-Charge

Providing and fixing C.P. Brass pillar tap with Capstan head. 15 mm dia including carriage of material within all leads and lifts through all modes of transportation and as per HP.PWD. Specification of 1990 volume-I and as per direction of Engineer-in-Charge

Providing and fixing C.P.Brass stop cock: 15mm dia including carriage of material within all leads and lifts through all modes of transportation and as per HP.PWD. Specification of 1990 volume-I and as per direction of Engineer-in-Charge

Providing and fixing P.V.C. Connection with brass unions.a)300/450 mm length. i)15mm nominal bore. including carriage of material within all leads and lifts through all modes of transportation and as per HP.PWD. Specification of 1990 volume-I and as per direction of Engineer-in-Charge

Providing and fixing full way valve with wheel 20 mm nominal bore. including carriage of material within all leads and lifts through all modes of transportation and as per HP.PWD. Specification of 1990 volume-I and as per direction of Engineer-in-Charge

Providing and fixing PVC water storage tank of ISI: 12701 marked, G.I. inlet and outlet connection, 15 mm nominal bore ball valve and mosquito proof PVC cover with locking arrangement including hoisting up to all heights above ground level:- 2000 litres net capacity tank. including carriage of material within all leads and lifts through all modes of transportation and as per HP.PWD. Specification of 1990 volume-I and as per direction of Engineer-in-Charge

Providing and fixing PVC floor trap ISI marked of self cleaning design including fixing with approved adhesive, cost of cutting and making good the wall and floors etc. complete.110mmx90mm (One hundred ten into ninety) including carriage of material within all leads and lifts through all modes of transportation and as per HP.PWD. Specification of 1990 volume-I and as per direction of Engineer-in-Charge.

Providing and fixing Polytheline-Aluminium-Polythelene(PE-AL-PE) composite pressure pipe U.V. stabilized with carbon black conforming to IS-15450-2004 water supply including clamp at one metre spacing, cutting,fixing and making good the wall etc. but excluding the cost of fittings (internal work) pipes exposed on wall. Internal work-Exposed on wall.1216 (One thousand two hundred sixteen) (16 mm O.D. pipe) including carriage of material within all leads and lifts through all modes of transportation and as per HP.PWD. Specification of 1990 volume-I and as per direction of Engineer-in-Charge

Constructing manhole with R.C.C. top slab in 1:2:4 (1 cement: 2 sand 4 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 (1 cement : 4 sand :8 graded stone aggregate 40 mm nominal size), inside plastering 15 mm thick with cement mortar 1 : 3 ( 1 cement : 3 sand) finished with a floating coat of neat cement and making channels in cement concrete 1 : 2 : 4 (1 cement : 2 sand : 4 graded stone aggregate 20 mm nominal size) finished smooth complete including curing and testing:- Inside size 800 mm x 800 mm and 500 mm deep including C.I. cover with frame. (Light duty single seal:Pattern 1) 455 mm x 610 mm internal dimensions total weight of cover and frame to be not less than 38 kg. (weight of cover 23 kg. and weight of frame 15 Kg):- With 200 mm thick walls of brick masonry using common burnt clay building bricks in cement mortar 1 : 3 (1 cement :3 sand). including carriage of material within all leads and lifts through all modes of transportation and as per HP.PWD. Specification of 1990 volume-I and as per direction of Engineer-in-Charge

Providing and fixing PVC single equal branch with oval access door, ISI marked insertion rubber washer 3 mm thick bolts and nuts complete including fixing with approved adhesive etc. complete. including carriage of material within all leads and lifts through all modes of transportation and as per HP.PWD. Specification of 1990 volume-I and as per direction of Engineer-in-Charge . 110 mm dia (One hundred ten millimetre)

150 mm dia (One hundred fifty millimetre)

Providing and fixing PVC door bend with oval access door, insertion rubber washer 3 mm thick bolts and nuts ISI marked complete including fixing with approved adhesive etc. complete. including carriage of material within all leads and lifts through all modes of transportation and as per HP.PWD. Specification of 1990 volume-I and as per direction of Engineer-in-Charge. 150 mm dia (One hundred fifty millimetre)

110 mm dia (One hundred ten millimetre)

Providing and fixing PVC collars ISI marked including fixing with approved adhesive etc. complete. including carriage of material within all leads and lifts through all modes of transportation and as per HP.PWD. Specification of 1990 volume-I and as per direction of Engineer-in-Charge. 150 mm dia (One hundred fifty millimetre)

110 mm dia (One hundred ten millimetre)

Providing and fixing PVC plain bend ISI marked including fixing with approved adhesive etc. complete. including carriage of material within all leads and lifts through all modes of transportation and as per HP.PWD. Specification of 1990 volume-I and as per direction of Engineer-in-Charge. 150 mm dia (One hundred fifty millimetre)

110 mm dia (One hundred ten millimetre)

Providing and fixing PVC clamps ISI marked of approved design with steel screws and rawal plugs etc. complete. including carriage of material within all leads and lifts through all modes of transportation and as per HP.PWD. Specification of 1990 volume-I and as per direction of Engineer-in-Charge. 150 mm dia (One hundred fifty millimetre)

110 mm dia (One hundred ten millimetre)

Providing and fixing flat back ( large size ) urinals No. 5001 with auto cistern of hindwear / shera with integral longitudnal flush pipe.including carriage of material within all leads and lifts through all modes of transportation and as per HP.PWD. Specification of 1990 volume-I and as per direction of Engineer-in-Charge

Providing and fixing Division plate for urinal 600mmx300mm viterious china. including carriage of material within all leads and lifts through all modes of transportation and as per HP.PWD. Specification of 1990 volume-I and as per direction of Engineer-in-Charge

Providing and fixing high pressure PVC spigot and socket, waste and ventilating pipes ISI marked including fixing with approved adhesive etc. complete. including carriage of material within all leads and lifts through all modes of transportation and as per HP.PWD. Specification of 1990 volume-I and as per direction of Engineer-in-Charge. 150 mm dia (One hundred fifty millimetre)

110 mm dia (One hundred ten millimetre)

P/L 1:5:10( 1 cemnt :5 sand : 10 graded stone aggregate 40 mm nominal size)bedding for PVC pipe 150mm dia . including carriage of material within all leads and lifts through all modes of transportation and as per HP.PWD. Specification of 1990 volume-I and as per direction of Engineer-in-Charge

PRATAP SINGH VERMA GOVT CONTRACTOR