PROVN OF CERTAIN MINOR WORKS MAJOR REVENUE

Amount

M&L for excavation in trenches not exc 1.5m in width and not exc 1.5 in depth for foundation etc and getting out in soft/loose soil.

M&L for excavating in trenches n exc 1.5 m wide and n exc 1.5 m in depth for foundation etc in hard/dense soil and getting out.

M&L for returning , filling in including in spreading, leveling, watering and well raamming in layers.n exc 25 cm

M&L for excavating in post holes or similar work each not exceeding 0.5 CUM in hard dense soil getting out and returning filling and ramming including watering etc and removing surplus to a distance n.exc 50 mtr and making good to ground all as directed.

M&L for excavation in post holes or similar holes each n.exc 0.50 cum, getting out in soft/loose soil and returning, filling in and ramming earth or broken rubble mixed with earth around in layers n.exc 25 cm, watering and removing surplus soil to a distance n.exc 50 mtr and making good to surface all as directed.

M&L for removing excavated soil to distance n.exc 50 mtr and deposited at a level n.exc 1.5m above the starting point as directed by Engr-in-Charge.

M&L cement concrete type D2 1:4:8 ( 40 mm graded aggregate) as in foundation, filling and mass concrete.

M&L for cement concrete type C2 1:3:6 (40 mm graded stone agg) as in foundation, mass concrete.

M&L for plain cement concrete 1:2:4 type B0 (12.5mm graded stone aggregate) as in copings including necessary form work.

M&L for reinforced cement concrete (Nominal mix) Type A1 1:1/2:3 (20 mm graded aggregate) as in chajjas

M&L for brick works with old size sub class 'B' bricks, straight or curved on plan exc 6m mean radius built in cement mortar 1:6 complete all as specified and directed

M&L for cutting holes into brick walls built in cement mortar superficial area exc 400 Sq cm but n exc 0.10 Sqm for depth 15 cm

M&L for formwork to chajjas flat rough finished surfaces of concrete

M&L for beads exc 3mm but n exc 75mm girth on soft wood

M&L for second class hard wood for plain solid straight chowkats & frame wrought framed related on the solid rounded or chafered, put together with glue pined at joints complete all as specified and as directed

S&F 30mm thick factory made glazed and skelten shutter open rebated and prerepair to receive glass, gauge etc with sash bars, edge of framing, plain/chamfered or rounded, fitted with cut and metered beads with second class hard wood complete all as specified and as diredted.

S&F MS barrel tower bolts stove enameled black with bright bolt of size 150mm long fixed complete all as specified and directed.

S&F MS sliding door bolt plate type, stove enameled black with bright bolt not less than 12mm dia with and incl. a minimum of 6 bolts and nuts,four on bolt plate and 2 on staple plate 300 mm long complete all as specified and directed.

S & F 100mm stainless steel butt hinges medium weight all as specified and directed

S&F 300mm ordinary rat rave rod pattern springs incl roller and roller plate

S&F MS pressed handles oval type stove enameled black fixed 125mm size complete all as specified and directed.

S&F 30mm dia, cupboard knobs fixed with nut, screw and washer of mild steel, bright finished

S&F in repair stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperature 1.40 and fixed with stainless steel wire staples complete.

Supply only mild steel work such as flat iron,round bars fixed independently as fillets for securing chain link fencing including all necessary drilling for bolting etc confirming to Fe-410-0 or Fe-310-0 complete all as specified.

M&L mild steel bolts (Machine made) with hexagonal or square head at one end and screwed the other end with washeres and one hexagonal or square nuts length of bolt exc 10cm long and dia of shank 11 to 15mm

M&L for Mild steel TMT bars of 10mm dia and over,cut to length,bent to shape required,including cranking,bending spirally for hooping for columns,hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips

S&F joist channel angle, tee section, MS pipe, MS square tube ,Steel trusses as required , MS plate fixed in purlin rafter cleat, support and including cutting of grooves in stone masonry and MS Frame work fixed into the walls etc incl welding, riveting, J-hook etc conf to Fe-290 Gde E-165 all as directed by Engr-in-charge

M&L for MS Plates (plain or chequered) channels. Square cut or notched (ordinary and counter sunk) forming holes with riveted, bolted or welded attachment ( GDE E-250 Fe 410-W) including hooking arrangements fot hanging all as specified and directed by Engr-in - Charge.

S&F Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete,conforming to Fe 410-W (Gde -E-250)quality -A drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings

Fixing only chain link fencing including line wire, any mesh, size and type to any of standards, rails, straining blots etc including provision of blinding wire

S&F for anodised aluminium frame for sliding glass panes incl suitable roller arrangements

Supply only chain link MS galvanised fencing of any size or type as approved by Engineer-in-Charge

S&F pre-painted galvatume aluminium zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550Mpa as in roof covering/clading to wall, molding/folding in circular/semicircular of any position and height fixed with self tapping screws as specified, As directed by Engr-in-charge

S&F pre-painted galvatume aluminium zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550Mpa as in roof covering/clading to wall, molding/folding in circular/semicircular of any position and height fixed with self tapping screws as specified, As directed by Engr-in-charge

M&L for machine cut kota stone slab 20-25mm thick over 15mm cement screed in CM 1:6base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing complete all as specified and directed.

M&L for machine cut kota stone slab flooring 20-25mm thick laid and jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing, moulding on edge and polishing over and including 20mm thick screed bed in CM 1:4 complete all as directed by Engineer-in-Charge.

M&L for Granite (of any type) tiles 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete

M&L for rounding to edges of stone slabs one edge such as in steps cooking platform and other similar work

M&L 75 mm thick PCC 1:4:8 type D-2 (using 40mm grade stone aggregate) as in Sub floors,Sub bases ,flooring etc

M&L 40 mm thick PCC 1:2:4 type B-1 (using 20mm grade stone aggregate) as in flooring finished even & smooth with using extra cement.

M&L for glazed ceramic tiles coloured size 300 x 200 x 7mm thick as on vertical surfaces, of walls as in skirting, dado etc set and jointed in neat cement slurry & pointed with coloured cement to match complete all as specified and directed

M&L for non-skid coloured ceramic tiles 7 to 8mm thick (square / rectangular) area of each tile exceeding 0.18 Sqm but not exceeding 0.38 Sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

M&L for rendering 15 mm thick on fair faces brick work or concrete surfaces in CM 1:4 and finished even and smooth complete all as specified and directed

M&L for rendering 15 mm thick cement mortar on stone masonary surfaces or surfaces other than fair faces of brick work in cement mortar 1:4 as backing coat to glazed tile complete all as specified and directed

M&L for 15mm thick cement plaster on fair faces of brick work/stone work on Walls , concrete surface finished even and smooth without using extra cement in cement mortar 1:6 all as specifed.

M&L for screed bed or bedding layer of cement mortar 15 mm thick for laying floors finishes in cement mortar 1:6complete all as specified and directed

M&L for screed bed or bedding layer of mortar 15 m thick for laying floor finish in CM 1:4 complete all as specified and directed

M&L for one coat of white wash on walls including preparation of old treated plaster surfaces by washing , rubbing down stopping all as directed.

M&L for two coats of oil emulsion distemper on walls white or tinted incl preparation of new surfaces

M&L for preperation of new/old plastered surfaces and applying two coats of cement based paint on walls all as specified.

M&L for preparation of new plastered surfaces and applying two coats of cement base paint on walls over a coat of alkali resistant priming paint all as specified.

M&L for preperation of new/old plastered surfaces and applying two coats of oil bound distemper on walls over a coat of 3 mm thick wall care putty all as specified.

S&F Sheet glass of 5.5mm thick ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane

M&L for preparation of new wooden surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

M&L for preparing new steel surfaces of any discription exc 10 cm in width and applying two coats of synthetic enamel paint over a coat of red oxide primer.

S&F GI tubes medium grade with all fitting and fixed complete to walls and ceiling or laid in floor in 15 mm bore of tube.

S&F 40mm PVC high density polyethylone pipe HDPE of pressure rating 6 Kgf/Cm2 fixed complete to walls or in floors etc any type of pipe including fixing arrangement to urinal and WHB out lets and removal of old pipes from site complete all as specified and directed.

S/F in repairs 15 mm bore bib taps chromium plated cast copper alloy with crtuch or butterfly handle,screwed down, screwed for iron pipe or for brass ferrule and fixed Make- Jaquar or Kohler or Parryware.

S&F bib taps, fixed cast copper alloy with crutch or butterfly handle, fancy type chromium plated screwed down, screwed for iron pipe or for brass ferrule and fixing 15mm bore dia complete all as specified and directed.

S&F as in repair 15 mm bore fancy type pillar taps cast copper alloy capaston head chromium plated, screwed down high pressure with or without lettered “ HOT” or “ COLD” with long screwed shanks and fly nuts screwed for iron pipes fixed as in repair complete all as specified and directed by Engineer-in-Charge ,

S&F for waste fittings,brass,chromium plated 40 mm dia for sinks

S&F sinks made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in ce-ment mortar on to dwarf wall or including fixing cantilever brack-ets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm complete all as specified and directed.

S&F in repair vitreous china wash basin white flat back size 550x400mm excluding taps, waste, chain & plug and porcelain stopper but including brackets.

M&L Point wiring complete with 1.5 Sqmm single core multi standard copper conductor PVC FRLS insuladted unsheathed cable in and incl PVC casing capping with accessories existing pressed steel terminal boxes (sunk in wall) including new 3.00 mm thick plastic laminated sheet top cover with 1.50 Sqmm insulated unsheathed PVC FRLS copper conductor for common earth and connecting to earth dolly for :- (a) One fan point controlled by one one way switch.

(b) One socket out let 5 Amps on the same board.

S&F fan ceiling with electronic type regulator and accessories 230V, 1200 mm sweep of 5 star rated complete all as specified and directed by Engineer-in-Charge.

S&F wall mounted fan of 400 mm sweep complete all as specified and directed by Engineer-in-Charge.

Comprehensive maintenance servicing and testing of slolar water heating system of 500/750/1000 Ltrs capacity including washing, cleaning of water carrying pipes, scalling inner surfaceswith anti scalant liquid solution complete all as specified & directed.

Taking out unserviceable solar modules frrom the site complete all as specified & directed.

Supply and installation of Multi crystaline solar modules 24 Volt, 250 Wp as per MNRE specifications complete all as specified & directed.

Taking up old rusted water distribution galvanised pipes of size 15 mm dia complete all as specified & directed.

Taking down old unserviceable insulation cover of alluminium foil of size 2.00 mm thick and 50 cm widefrom with 40 mm puff at the working site complete all as specified & directed.

S&F insulation 50 mm thicker puff with covering 2.00 mm aluminium cover on outer layer complete all as specified & directed.

Taking down old u/s regulating valve of size 15 mm dia complete all as specified & directed.

S&F flow regulating valve of size 15 mm dia including necessary fitting & fixtures complete all as specified & directed.

M&L for Welded steel wire fabric supplied and fixed to wood or steel members complete all as specified & directed.

S&F solar water heater tank of capacity exc 500 but n.exc 1000 litre with rust proof polestr powder coating on galvanize metal complete all as specified & directed.

S&F ceiling fan 1200 mm SS-390 metallic pearl ivory complete all as specified & directed.

S&F Water heater storage type, electric, capacity 25 litres BEE 5 star rated complete all as specified & directed.

S&F Water heater storage type, electric, capacity 50 litres BEE 5 star rated. complete all as specified & directed.

S&F Framed brackets of angles or tees and MS Flats, base plates with web and flanges cut to shape, drilled and countersunk for screw, including bending and welding angles and fixed to roof with fastners, as necessary, gusset plates, rivetting, hinges including with locking arrangements etc., n exc 10 kg each brackets, conforming to Fe 410-0 or Fe 310-0 (Brackets over 10kg each to be measured under `Structural Steel') complete all as specified & directed.

M&L for 12mm prelaminated particle board, interior grade, prelaminated one side with decorative colour choice lamination on other side balancing white lamination, fixed with screws to timber frame work for small openable doors for electrical switch boards all as specified and directed by Engr-in-Charge.

M&L for 2nd class hard wood plain fillets, square, rectangular or triangular in section, clean sawn of battens size of 50mmx50mm sectional area exc 13 & n.exc 25 Sqcm secured to walls as frame work using with suitable screwes and fasteners all as specified and directed by Engr-in-Charge.

Haritwal traders

rathore construction co.

vinayandsons