GE/KHU-39/2021-22 SPECIAL REPAIR OF FALSE CEILING ,WALL PANELING AND ELECTRIC WIRING TO CERTAIN BUILDINGS OF MTN BDE AT BIAMAH IN THE AOR OF AGE B/R-II KHALTSI, UNDER GE KHUMBATHANG

Amount

Dismantling, wall and ceiling boards (fibre, pulp, insulation, etc) or insulation boards/slabs/blankets, any thickness, including cover fillets complete all as specified and as directed.

Dismantling timber in fillets, rails, posts, rafters, purlins etc under 40 Sq cm in section in any position unframed work complete all as specified and as directed.

M&L second class soft wood, plain fillets, square or rectangular in section of area exc 13 and n exc 25 Sqcm, clean sawn, secured with nails or brads complete all as specified and as directed.

M&L second class soft wood, plain fillets, square or rectangular in section of area exc 6 and n exc 13 Sqcm, clean sawn, secured with nails or brads complete all as specified and as directed.

M&L 9 mm thick, prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination and other side balancing white lamination, fixed with screws to timber frame work as in ceiling complete all as specified and as directed.

M&L 12 mm thick, prelaminated particle board, interior grade, prelaminated one side with decorative choice laminated and other side balancing white lamination fixed with nails to timber frame work as in wall panelling complete all as specified and as directed.

Dismantling plain or corrugated steel sheeting, any gauge, thickness including Nanital patterns roof covering. complete all as specified and directed by Engineer-in-Charge.

S&F 0.63 mm thick galvanised corrugated mild steel sheeting with two corrugation side lap fixed with L and J type or cranked hook bolt as in roofs, walls etc with grade of zinc coating 275, complete all as specified and directed by Engineer-in-Charge.

All as per Srl item No.08 above but except sheeting (any thickness)complete all as specified and directed.

M&L for preparing new steel surface and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed.

M&L for preparing old steel surface and applying one coat of synthetic enamel paint complete all as specified and as directed.

M&L for preparation of old decorated surface of walls and applying one coat of coat of oil emulsion distemper complete all as specified and directed.

M&L for preparation of old painted wood/ wood based surface of any description over 10 cm width or grith one coat of synthetic enamed paint in wall on incl prepartion of surface complete all as specified and directed.

Taking down carefully copper/aluminium point wiring (light, fan socket or power) complete including fittings such as switches, ceiling reose, pendents, regulator sockets etc, removing material from site and making good the disturbed surfaces of wall/floor/roof all as specified & directed by Engr-in-charge.

Material & Labour for point wiring with 1.5 sq mm (Nominal area) FRLS, PVC insulated, 1100 volt grade, multistranded copper conductor cable un-sheathed in & including PVC casing caping with fittings/accessories and PVC insulated, FRLS, 1100 volt grade un sheathed copper conductor of 1.5 sqmm size cable earth wire connected to common earth including closed recessed wooden terminal boxes of suitable size made of 2nd class hard wood for mounting of switches, sockets, fan regulators etc with 3mm thick plastic laminated sheet of Hylam/Mica make as top cover complete all as specified for the following:-

(a) One light point/fan point/buzzer point Exhaust fan point controlled by one switch.

(b) One socket out let 5 Amp on independent board complete

(c) One socket outlet 5 Amp on same board with other switch complete

All as per item No 15 above but for point wiring for power point with 2.5 Sqmm FRLS PVC insulated unsheathed copper cable 1100 Volt grade drawn through and including PVC casing caping heavy duty ISI marked /heavy duty conduit ISI marked as required at site alongwith accessories with 2.5 Sq mm FRLS PVC insulated unsheathed copper conductor cable as earthing and connected to common earth on independent board all as specified and directed.

Wiring in surface/ressesed as required for circuit/ sub main wiring along with earth wire with the following size of flame retardent pvc insulated copper conductor .single core cable in surface/ressesed as required of 2x4sqm+1x2.5 sqmm earth wire complete all as specified and directed

Supply and Fixing switch piano flush button type 6 Amp single pole one way (ISI marked) complete.

Supply and Fixing switch piano flush type 15 Amp single pole one way ISI marked complete all as specified and directed by Engineer-in-Charge.

Supply and Fixing socket out let multipurpose three pin 5 Amp and 2 pin 5 Amp flush type complete all as specified and directed by Engineer-in-Charge.

Supply and Fixing socket outlet 2 in 1, three pin 5 Amp and 6 pin 15 Amp flush type (multi purpose) ISI marked complete all as specified and directed by Engineer-in-Charge.

Supply and Fixing ceiling rose three terminal pvc/polycarbonate, isolated body complete all as specified and directed by Engineer-in-Charge.

Supply and Fixing lamp holder ,PVC/Polycarbonate type with back plate suitable for batten fitting (angle /plain) complete all as specified and directed by Engineer-in-Charge.

S&F in replacement LED 1x16 watt for Decorative AC box type LED lighting fixture with extruded polycarbonate, environmental friendly, energy efficient ready to use pack., 230volts, 50 Hz including making necessary connection prewired and making connection with 3 core copper flexible cable of appropriate size from ceiling rose/PVC connector to light fittings complete all as specified and directed.

S&F in replacement of LED luminaire of size 600mmx600mm ,40 watt 220 volt suitable for recess/ armstrong celling/ grid ceiling and POP mounting and making all electric connections including twin core 1.5 sqmm flexible copper cable for connecting to ceiling rose including necessary alteration work in false ceiling to cover the blank space in false ceiling all as complete connection all as specified and directed

Supply and fixing in repair for Distribution board double door made out of sheet metal enclosure (CRCA sheet) dust and vermin proof SPN 8 way with 200 Amps rated copper bus bar neutral bar, earth bar IP 43 protection, single pole and neutral 250 volts, flush to wall / fixed on surface complete all as specified and directed .

Supply and fixing in repair for Distribution board double door made out of sheet metal enclosure (CRCA sheet) dust and vermin proof SPN 4 way with 200 Amps rated copper bus bar neutral bar, earth bar IP 43 protection, single pole and neutral 250 volts, flush to wall / fixed on surface complete all as specified and directed .

Supply and fix in replacement 1100 volts grade heavy duty cable PVC insulated aluminium stranded conductor served with inner sheathing of PVC tape and overall PVC sheathed in service connections twin core cable flat or circular 6 sqmm complete all as specified and directed by Engr-in-charge

Supply and fixing in repair MCB 6 to 40 Amp SP 240 volt AC supply rupturing capacity not less than 10 KA complete all as specified and directed by Engineer-in-Charge.

Supply and fixing in repair MCB 40 Amp single pole & neutral 240 volt AC supply rupturing capacity not less than 10 KA IP 20 complete all as specified and directed by Engineer-in-Charge.

Supply and fix in replacement of Exhaust fan ,Steel body ac single phase 230 volt of size 300mm sweep with blades and frame and louvers Complete all as specified and directed.

Deduct Credit for Demolished/Dismantled material Rs (-) 14,878.00 (Minus) as listed in Schedule 'A' Sec-II (Credit Schedule) Note : Tenderers will not quote against this item being a tentative amount, to be considered to arrive at the 'Contract Sum'.

KASHMIR FAIR DEAL SERVICES

M/S HAJI MOHD ALI

M/S DUTTA ENGINEERING WORKS

M/S LIBE & CO