Special repair to officers MD Accn at cloud end and certain E/M works at Tirah line at Military Station Dharamshala.

Amount

Taking down chowkats with shutters (without taking off shutters from the frames) of any description exc. 1.5 Sqm but n exc 4 sqm each all as specified.

Taking down shutter of any description exc 1sqm and n exc 2 sqm each all as specified.

S&F Solid PVC frame (Single Rebated) of size 60mm x 30mm made out of solid PVC foam with homogenous fine cellular structure having smooth outer integral skin with suitable metal stiffner and fixed with 100 x 8 sheet metal CSK screws complete all as specified and directed by Engineer-in-Charge . Note :- Door frame shall be water proof, termite proof, elegant and should have excellent screws holding strength to fix hinges and hold doors properly for a long life.

S&F Factory made solid panel PVC door shutter 30mm thick (Style) consisting of frame made out of M. S. frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent for top rail, lock rail & battom rail on either side & as gap insert for top rail & bottom rail, panelling of wood grain printed PVC sheet to be fitted in the M. S. frame welded/sealed to the stiles & rails with suitable 5mm thick x 15mm wide PVC sheet beading used inside stiles and rails and decorative PVC beading of 10mm x 10mm (90 degree) used instead of exposed portion of PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing on page No. 177 of MES SSR Part-II 2020, all as specified and directed by Engineer-in-Charge.

S &F 40mm thick flush shutters, solid core construction, with block board core and plywood face panels commercial type on both sides and one face is covered with decorative face veneer with lipping/frame to match all as specified and directed by Engr in Charge.

S & F Mortice brass lock, 4 Levers vertical type size 100mm all as specified and directed by Engr-in-Charge.

S &F Galvanised mild steel wire cloth 0.63mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks or galvanised wire staples all as specified and directed by Engr-in-Charge.

S&F 100mm butt hinges cast brass with mild steel hinge pin, bright polished and fixed type B-11 all as specified and directed by Engr-in-Charge.

S&F 150mm aluminium, anodised, barrel tower bolts of extruded section and fixed all as specified and directed by Engr-in-Charge.

S&F 150mm long aluminium handles, cast type, anodised all as specified and directed by Engr-in-Charge.

S & F 300mm long mild steel sliding door bolts, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts , four on bolt plate and two on staple plate and fixed all as specified.

Taking down cement plaster on brick or concrete surfaces etc incl racking out joints, hacking for key,scrubbing down with water etc complete all as specified.

M&L for 10mm thick Rendering in CM 1:6 on fair faces of brick work or concrete surfaces finished even and smooth with out using extra cement complete all as specified and directed by Engr-in-Charge.

Complete removal of existing treatment of walls external /internal i.e complete removal of white wash distemper surfaces etc all as specified and driected by Engr in Charge.

M & L for preparing new plastered surfaces of walls and distempering with Ist quality of acrylic distempering/emulsion (ready mix) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer's specification with two or more coats on new work or completely removed existing treatment surfaces etc all as specified and directed . Make-:Asian paint:Appcolite premuim emulsion or equivalent as approved by Engeer-in-Charge.

M&L for 15mm thick Rendering in CM 1:4 on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement with WPC complete all as specified. Note- WPC shall be measured and paid for seperately under relevant item of BOQ.

Supply only liquid water proofing compound complete all as specified.

Preparation of surfaces plastered or unplastered washing, rubbing down and stopping of distempered and painted surfaces and Applying two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/lits and UV resistances dirt resistance exterior paint of required shade (Company depot tinted) with silicon additives @1.43 ltrs/10sqm over and including priming coat of exterior primer applied @ 0.90ltr/10sqm over new surfaces or completely removed existing treatment surfaces all as specified. Make-:Asian paint:Apex Ultima or Berger weather coat long life-7 or equivalent as approved by Engeer-in-Charge.

M&L for 5mm thick Rendering in CM 1:4 on concrete surfaces as in ceilling and surface finsihed even and smooth wihtout using extra cement all as specified.

M & L for applying 3mm thick wall care putty on walls all as specified.

M & L for applying 3mm thick wall care putty on Ceilings all as specified.

Demolition of stone slabs and tiles of any description or thickness in any position complete.

M&L for Glazed ceramic coloured tiles in vertical surfaces 450x350x7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match , laid over and including 10mm thick bedding layer(plaster) in cement mortar 1:4 on surfaces of walls complete, all as specified.

Demolition of cement concrete in ground floors and paving, not exceeding 15cm thickness (below or above ground level), un-reinforced, complete, all as specified.

M&L for 25mm thick PCC M-15, nominal mix, type B-1, using 20mm graded mechanically crushed stone aggregate as in floors, finished even and rough to receive floor finishes, complete, all as specified.

M&L for Non -skid Ceramic coloured tiles 7 to 8mm thick (Square/rectangular) area of each tile exc. 0.06 Sqm but not exc. 0.11 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, laid over and including 15mm thick screed bedding layer in cement mortar 1:6 complete, all as specified.

M & L for Vitiriefied Ceramic tiles light shade 10mm thick (square/rectangular) polished area of each tiles not exceeding 0.36 sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match, laid over and including 15mm thick screed bedding layer in cement mortar 1:6 complete all as sepcified.

M & L for cement concrete M-7.5, nominal mix type D-2 (with using 40 mm graded stone arrgegate ) as in sub base, foundation, filling and mass concrete ,complete all as specified.

M & L for cement concrete for M-10 in surface channels and drains all specified and directed by Engr-in-Charge.

S&F Vitreous china wash down water closet pan (pedestal pattern), white and trap including connection to drain (or outgoing pipe) and to flushing pipe, antisyphonage pipe etc seat and cover for pedestal pan including, Health faucet fixing in pipe etc all as specified and directed. Cat Part No-: VGS-WHT-0207P of Jaquar of equivalent make as approved by AGE(I).

S&F vitreous china wash basin angle back, size 600x480mm white exluding taps waste chain and plug and porcelain topper rest on pedestal with 15mm dia Pillar taps cast copper alloy with capstan heads chromium plated, screwed down high pressure, with or without lettered Hot or Cold with long screwed shanks and fly nuts scrwed for iorn pipes and fixed with 450mm PVC connection all as specified and directed. Cat Part No KUS-WHT-35601 of Jaquar or equivalent make as approved by AGE(I) for WHB & Cat Part No KUB-350511FB of Jaquar or equivalent as approved by AGE(I) for Pillar taps.

S&F PVC valve less, crystal white, syphonic action type flushing cistern 10 liter capacity, superior quality, plunger type, low level, with inlet, ball valve, float and handle, 32mm dia PVC long bend flush pipe 90cm long and 15mm dia 450 mm ling PVC connection with CP brass coupling nuts and PVC washers at bothy ends fixed, in repairs, all as specified. Cat Part No 2602 of CERA of equivalent as approved by AGE(I)

Taking up or down steel tubing and connections,including cleaning for refixing or removal to store for 15 mm bore tubing complete all as specified and directed by Engineer-in charge.

S&F for 15mm bore GI tubing medium grade with all fitting laid under floors or fixed in wall complete all as specified.

Taking up or down steel tubing and connections,including cleaning for refixing or removal to store for 20 mm bore tubing,complete all as specified and directed by Engineer-in charge.

S&F for 20mm bore GI tubing medium grade with all fitting laid under floors or fixed in wall complete all as specified.

Re-fixing only for 15mm bore GI tubing medium grade with all fitting laid under floors or fixed in wall complete all as specified.

Re-fixing only for 20mm bore GI tubing medium grade with all fitting laid under floors or fixed in wall complete all as specified.

Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc and cutting chases for concealed water tubing or concealed conduit wiring, etc and making good, cutting not exc 10 cm girth complete all as specified.

M & L for chequered cement concrete tiles with grey cement and no pigment, 25cmx25cmx22mm machine pressed set jointed and pointed in neat cement slurry in floors and cut and polished and laid over 15mm thick screed bed in cement mortar 1:6 complete all as specified and directed.

Hacking out old broken glasses from wooden or steel frames, conc or brick surrounds, glazed with putty or fixed with beads complete all as specified.

S&F sheet glass 3mm thick, ordinary quality and glazing withoil putty insquare n. exc 0.50 sqm in each pane complete all as specified.

S &F Figured glass, pin head type and glazing with oil putty in squares not exc 0.5 sq.m in each pane all as specified and directed.

S&F 15mm bore Bib taps, cast copper alloy with crutch or butterfly handle,screwed down,screwed for iron pipe or for brass ferrule fancy type chromium plated and fixed in repair all as specified and directed. Make : Jaquar Cat Part No 9037 or equivalent as approved by AGE(I).

S & F for 15mm bore angle valve , cast copper alloy scrwed down high pressure with crutch or butterfly handle scrwed both ends for iorn pipe or for unions suitable complete fancy type chromium plated all as specified. Cat Part No CON-053KN/CON-059KN of Jaquar of equivalent as approved by AGE(I).

S & F Tubular towel rail, 20mm dia D type 60Cm long between flanges aluminium anodised fixed in repair all as specified. Make : Jaquar Cat Part No 35711 or equivalent as approved by AGE(I).

S & F 16mm thick Veneered decorative ply wood grade I (With BWR residn decorative veneers on both faces all as specified and directed.

S & F 30mm Continuous (piano) hinges mild steel , bright finish or electorgalvanised with iron frames of cupboards all as specified and directed.

S & F steel work in tubular trusses including special shaped washer etc complete using ERW or inducation butt welded tubes conforming to IS 1161 1979 grade st-240 all as specified and directed.

S & F 0.63mm thick Galvanised corrugated mild steel sheeting with two corrugations side lap, fixed with coach screws and wahsers in roofs walls etc with grade of zinc coating 275 all as specified and directed.

S & F Wall mixture (wall mounted model) with Telephone shower arrangment only and Telephone shower crutch all as specified and directed by Engr in Charge. Make : Jaquar Cat Part No 9267 or Equivalent as approved by AGE(I).

M & L for cement concrete type B1 1;2:4 (20mm graded aggregate) in lintels upto 1.5m clear span, cills, steps, seismic and other similar bands, plinth courses, string courses lacing courses, parapet and railings upto 60cm in height , copings, kneelers, apex stones, bed plates, kerbs not provided like including weathering, slightly rounded or chmfered anges and throating as directed.

S & F sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long all as specified and directed. Make : Jaquar Cat Part No 35771 or Equivalent as approved by AGE(I)

S & F toilet paper holder with flat recessed type stainless steel complete all as specified and directed. Make : Jaquar Cat Part No 35753 or Equivalent as approved by AGE(I).

S &F soap dish any type fixed to plugs with chromium plated brass screws all as specified and directed. Make : Jaquar Cat Part No 21731 or Equivalent as approved by AGE(I).

M & L for 75mm thick plain cement concrete type C2 1:3:6 (using 40mm graded stone aggregate) as in plinth protection as specified and directed by Engr-in Charge.

M & L for 75mm PVC (SWR) floor trap, plain with grating including jointing with solvent cement as specified and directed by Engr-in Charge.

S & F 110mm PVC (SWR) pipes single socketed in any length with rubber ring joints laid in tenches or in floor as specified and directed by Engr-in Charge.

S & F 75mm PVC (SWR) pipes single socketed in any length with rubber ring joints laid in tenches or in floor as specified and directed by Engr-in Charge.

S & F PVC (SWR) vent cowl as specified and directed by Engr-in Charge.

S &F PVC (SWR) reducers (110 to 75mm) as specified and directed by Engr-in Charge.

S & F PVC (SWR) bends 75mm as specified and directed by Engr-in Charge.

S & F PVC (SWR) Bends 110mm as specified and directed by Engr-in Charge.

M & L for PCC type C2 1:3:6 100mm thick as in sub base of hardstanding all as specified.

M & L for PCC type B1 1:2:4 (20mm graded aggregate) 25 mm thick as in base of hardstanding all as specified.

Taking down carefully copper/aluminum point wiring (light, fan, socket or power) complete with fittings and fixtures such as switches, ceiling roses, pendants, regulators, socket, lamp holders brackets, bulk head fittings, tube light fittings etc removing material to store and also making good disturbed surfaces of wall, floors etc all as specified and as directed by the Engineer-in-Charge.

M & L for point wiring with 1.5 Sqmm PVC insulated unsheathed 1100 Volt grade multi – stranded copper conductor cable of size 1.5sqmm drawn through and including PVC conduit 20mm dia ISI marked and all accessories totally concealed and 3mm thick new hylum sheet cover the sunken boxes, including 1.5sqmm but in green colour copper conductor cable for earth continuity complete all as specified. Note:- All the disturbed surfaces of wall/ceiling shall be made good to match the existing wall/ceiling finishes and as directed by Engr-in-Charge.

All as per item No 68 above, but for one 3 pin socket outlet 5 Amp on the same board with other switches complete all as specified and as directed by the Engineer-in-Charge.

All as per serial item No 68 here-in-before , but for one socket outlet 15 Amps on independent board with 2.5 Sqmm copper conductor ( Multi-stranded) PVC insulated and unsheating electric cable 1100 volts (ISI Marked) including PVC insulated and unsheathed electric cable 1100 volts grade 2.5 Sqmm copper conductor as continuous earth wire connected to common earth dolly complete all as specified and as directed by Engineer-in-Charge.

M&L for Switch piano flush button 5 Amps complete as specified. Make: Havells/Legrand/Crompton Graves.

M&L for socket outlet 2 in 1, 3 pin, 5/6 Amp and 15/16 Amp flush type complete as specified.

M&L for Switch piano flush type single pole one way 15/16 Amp complete as specified.

M&L for ceiling rose surface type, 65 mm x 50 mm two to three terminals / PVC / polycarbonate, isolated body fixed on PVC block complete all specified and as directed by the Engineer-in-Charge. Make: Havells/SSK/Cona

Supply and fix in replacement of existing unserviceable Sheet metal enclosure for DB’s suitable for MCBs of triple pole and neutral 6 way double door type with 200 amp rated bus bar double door type complete all specified and as directed by the Engineer-in-Charge.

Supply and fix in replacement of existing unserviceable MCB TPN 63Amp ( 01 Incoming + 04 outgoing) complete all specified and as directed by the Engineer-in-Charge.

Supply & fixing or laying of GI pipe of size 40mm dia light grade laid in trenches/walls including clamps,screws complete all as specified and directed by Engr-in-Charge.

Supply & Fix in replacement of existing unserviceable Sheet metal enclosure for DB’s suitable for MCBs of single pole and neutral 8 way with double door type with 200 amp rated bus bar. Note: i) Connnections of the MCB'S shall be done with appropriate size of brass/ Cooper thimble. ii) The disturbed surface shall be match with existing surface complete all as specified and directed by Engr-in-Charge. Make: Havells/Legrand/ABB

S&F in replacement of MCB SPN 40Amp breaking capacity 10 KA complete all specified and directed by Engr-in-Charge . Make: Havells/Legrand/ABB

M&L 6 to 32 Amps MCB SP 10 KA complete all as specified. Make: Havells/Legrand/ABB

Supply & fix in replacement of existing unserviceable FTL with new techonlgy ultra bright LED tubelight with aluminium heat sink & polycarbonate diffuser having high efficacy suited for installation in existing T5 or T8 tubelight with G5 lamp holders to give glare free light of capacity 18W 865 1148mm LED including neccessary electric conection to batten complete all specified and directed by Engr-in-Charge . Make: Havells Model : Crystal Glass LED Tubelight (Double Side Connection) Cat part No. CRYSTAL1213T8DSTL18WLED865SGLASS or equivalent in Bajaj /WIPRO

Supply & fix in replacement of existing unserviceable batten with BOX TYPE Pre-coated CRCA body, heavy duty regal batten for LED tube universal batten for G13 T5 or T8 lamps including neccesary fitting on wall and making electric connection from ceiling rose to connector with suitable size of electric cable and making good the disturbed surface. Make: Havells Cat part No: REGALBATTENT5UPTO1X18DSBSWH or equivalent in Bajaj/WIPRO

Supply and fix 1X30 watt LED Security light fitting with lamp pressure die cast housing with epoxy powder coated dark graphite grey colour finish, prismatic polycarbonate cover with individual LED lenses with GI pipe 1.5mtr length, clamps, nuts, bolts complete all as specified and directed by Engr-in-Charge.

M & L for earthing complete with galvanized steel earth plate electrode 60 cm x 60 cm x 6mm thick, buried directly in ground (earth pit not less than 2.25 mtr deep below normal ground level) with top edge of the plate not less than 1.5 mtr below normal ground level connected to galvanized earth lead wire 4.0mm dia by means of bolts, nuts, check nuts and washers of galvanized iron or steel all as shown in electrical plate No.3 of SSR part-I connected to earthing point of DBs all as specified or indicated including testing on completion.

Supply and fixing for sub main wiring single core PVC insulated and unsheathed cable two run 6 Sqmm multi -strand copper conductor drawing in PVC casing caping with 1 x 4.0 Sqmm earth wire as in earth and neutral complete all as specified and directed.

jatindera enterprises

M/S MADAN GOPAL and CO

VIJAY KUMAR LAKHNI

M/S RUDHRAKSH TRADING CO

Mahashakti Enterprises