REPAIR AND MAINT OF WOODEN FURNITURE AND SOFA SET INCLUDING POLISHING FOR AF STN AMBALA, BAKNAUR, RAJPURA AND KALPI UNDER GE (AF) AMBALA

BED PLYWOOD TOP FD-246: - M&L for carrying out repair and replacement of the following parts of bed plywood top all as shown in drg and as directed by Engr-in-Charge.

S&F plytop made out of 12mm thick commercial plywood of size 1800x900mm BWR ISI marked IS-303 complete all as specified and directed.

S&F long rail frame of size 35x90x1980 mm long made out of 1st class HW, complete all as specified and directed.

S&F head board frame made out of 1st class HW with 4mm thick OST plywood as per existing shape & size complete all as specified and directed.

S&F foot board frame made out of 1st class HW with 4mm thick OST plywood as per existing shape & size complete all as specified and directed.

S&F stiffiner to support made out of 1st class Hard Wood of size (40x60x880)mm complete all as specified and directed.

S&F Short rail frame of size 60x60x900 mm made out of 1st class HW complete all as specified and directed.

S&F Leg of size 60x60x 660mm made out of 1st class H/W complete all as specified and directed.

S& F Flat iron L shape clamp 35mm x5mm bent to right angle complete all as specified and directed.

Apply one coat french polish to bed plywood top to obtain smooth, glossy finish including necessary preparation of surfaces complete all as specified and directed.

CHAIR WOODEN BOTTOM W/O ARM FD-56(M), FD-285: - M&L for Removing carefully the existing unserviceable/damaged parts of chair wooden bottom w/o arm and supply and fix of new parts/ components of required size and shape as per drg to match with the existing including re-assembling complete all as directed by Engr-in-charge

S&F of front leg of size 50 x 50 x 445mm high made out of 1st class HW complete all as specified and directed.

S&F of rear leg of size 40 x 65 x 840mm high made out of 1st class HW complete all as specified and directed.

S&F of front rail of size 25 x 65 x 415mm long made out of 1st class HW complete all as specified and directed.

S&F of rear rail of size 25 x 65 x 375mm long made out of 1st class HW complete all as specified and directed.

S&F of side rail of size 25 x 65 x 400mm long made out of 1st class HW complete all as specified and directed.

S&F of back stiffner 15 x 50 x 375mm long (slightly curve) made out of 1st class HW complete all as specified and directed.

S&F of stiffener of size 20 x 25 x 400mm long made out of 1st class HW provided 100mm high from bottom complete all as specified and directed.

S&F in replacement of seat made out of 6mm thick plywood BWR grade ISI marked with 6mm dia preparations to be provide to plywood seat complete all as specified and directed.

Apply one coat french polish to chair wooden bottom w/o arm to obtain smooth, glossy finish including necessary preparation of surfaces complete all as specified and directed.

CHAIR DINING FD-279 & 228: - M&L Removing carefully the existing unserviceable/damaged parts of chair dinning and supply and fix of new parts/ components of required size and shape as per drg to match with the existing including re-assembling with suitable size of bamboo pins complete all as shown in drg complete all as specified and directed.

S&F of front leg of size 45mm x 45mm x 460mm high made out of 1st class HW complete all as specified and directed.

S&F of rear leg of size 45mm x 65mm x 890mm high made out of 1st class HW complete all as specified and directed.

S&F of stiffiner of size 25mm x 19mm x 400mm long made out of 1st class HW complete all as specified and directed.

S&F of front rail of size 30 x 65 x 400mm long made out of 1st class HW complete all as specified and directed.

S&F of rear rail of size 30 x 65 x 400mm long made out of 1st class HW complete all as specified and directed.

S&F of side rail of size 30 x 65 x 380mm long made out of 1st class HW complete all as specified and directed.

S&F of back stiffner of size 15 x 50 x 390mm long horizontal rest slightly curved U shape made out of 1st class HW complete all as specified and directed.

S&F plastic rubber shoe white/black best quality as per existing size and shape complete all as specified and directed.

Apply one coat french polish to chair dinning to obtain smooth, glossy finish including necessary preparation of surfaces. complete all as specified and directed.

CHAIR EASY FD-17(M) & FD-229 : - M&LRemoving carefully the existing unserviceable/damaged parts of chair easy and supply and fix of new parts/ components of required size and shape as per drg to match with the existing including re-assembling with suitable size bamboo pins complete all as specified and directed.

S&F of leg of size 55 x 25 x 535mm high made out of 1st class HW complete all as specified and directed.

S&F of arms of size 65 x 25 x 610mm long made out of 1st class HW complete all as specified and directed.

S&F of front rails of size 25 x 70 x 520mm long made out of 1st class HW complete all as specified and directed.

S&F of side rails of size 25 x 70 x 520mm long made out of 1st class HW complete all as specified and directed.

S&F of rear rail of size 50 x 25 x 500mm long made out of 1st class HW complete all as specified and directed.

S&F of rear rail of size 50 x 25 x 500mm long made out of 1st class HW complete all as specified and directed.

Apply one coat french polish to chair easy to obtain smooth, glossy finish including necessary preparation of surfaces complete all as specified and directed.

S&F plastic rubber shoe white/black best quality as per existing size and shape complete all as specified and directed.

CHAIR WRITING FD-280 & FD-250: - M&L Removing carefully the existing unserviceable/damaged parts of chair writing and supply and fix of new parts/ components of required size and shape as per drg to match with the existing including re-assembling complete all as specified and directed.

S&F of front leg of size 55 x 30 x 660mm long made out of 1st class HW complete all as specified and directed.

S&F of rear leg of size 55 x 30 x 890mm long made out of 1st class HW complete all as specified and directed.

S&F of arms of size 55 x 19 x 495mm long made out of 1st class HW complete all as specified and directed.

S&F of rails of size 30 x 65 x 490mm long made out of 1st class HW complete all as specified and directed.

S&F of stiffiner of size 25x20 x 450mm long made out of 1st class HW complete all as specified and directed.

S&F of back Stiffiner of size 12 x 50 x 445mm made out of 1st class HW complete all as specified and directed.

Apply one coat french polish to chair writing to obtain smooth, glossy finish including necessary preparation of surfaces complete all as specified and directed.

S&F plastic rubber shoe white/black best quality as per existing size and shape complete all as specified and directed.

TABLE OF SIZE 900 X 600 X 760MM WITH DRAWER FD-283: - M&L for carrying out repair and replacement of the following parts of table 900x600x760mm. Removing carefully the existing unserviceable/damaged parts of table 900x600x760mm and supply and fix of new parts/ components of required size and shape as per drg to match with the existing including re-assembling complete all as all as specified and directed.

S&F of table top of size 500mm x600mm made out of 18/19mm thick pre laminated MDF board water proof both side decorated finish and 4mm thick teak wood edging all around the top all as shown in drg all as specified and directed.

S&F of leg of size 60 x 30 x 740mm high made out of 1st class HW complete all as specified and directed.

S&F of long rail of size 20 x 60 x 900mm long made out of 1st class HW complete all as specified and directed.

S&F of short rail of size 20 x 60 x 600mm long made out of 1st class HW complete all as specified and directed.

S&F of stiffiner of size 25 x 40x600mm long made out of 1st class HW complete all as specified and directed.

S&F of drawer as per existing shape & size made out of 1st class HW complete all as specified and directed.

S&F Chromium plated knob as per existing size and shape complete all as specified and directed.

Apply one coat french polish to table 900x600x760mm (3'x2') with drawer to obtain smooth, glossy finish including necessary preparation of surfaces.

S&F plastic rubber shoe white/black best quality as per existing size and shape complete all as specified and directed.

TABLE DINING FOR 6 PERSONS FD-273 : - M&L for carrying out repair and replacement of the following parts of Table dinning 8 pers.Removing carefully the existing unserviceable/damaged parts of Table dinning 8 pers and supply and fix of new parts/ components of required size and shape as per drg to match with the existing including re-assembling complete all as all as specified and directed.

S&F of table top of size 1500x900mm made out of 18/19mm thick pre laminated MDF board water proof both side decorated finishand 4mm thick teak wood edging all around the top all as shown in drg all as specified and directed.

S&F of leg of size 40 x 75 x 732mm made out of 1st class HW complete all as specified and directed.

S&F of long rail 25 x 100 x 1500mm made out of 1st class HW complete all as specified and directed.

S&F of short rail 25 x 100 x 900mm made out of 1st class HW complete all as specified and directed.

S&F of triangular bracket (as support) made out of 2nd class HW as per required shape & size complete all as specified and directed.

Apply one coat french polish to table dining 6 persons to obtain smooth, glossy finish including necessary preparation of surfaces complete all as specified and directed.

S&F plastic rubber shoe white/black best quality as per existing size and shape complete all as specified and directed.

PEG TABLE FD-236 & FD-277: - M&L for carrying out repair and replacement of the following parts of peg table.Removing carefully the existing unserviceable/damaged parts of peg table and supply and fix of new parts/ components of required size and shape as per drg to match with the existing including re-assembling of complete all as all as specified and directed.

S&F of table top of size 450x300mm made out of 18/19mm thick pre laminated MDF board water proof both side decorated finish and 4mm thick teak wood edging all around the top all as shown in drg complete all as specified and directed.

S&F of leg of size 30 x 50 x 370mm high made out of 1st class HW as per existing size & shape complete all as specified and directed.

S&F of top long rail of size 20 x 40 x 450mm long made out of 1st class HW complete all as specified and directed.

S&F of top short rail of size 20 x 40 x 300mm long made out of 1st class HW complete all as specified and directed.

S&F in replacement of stiffener 2 Nos. on bottom section to connecting legs in short side as per directed by Engr-in-Charge.

Apply one coat french polish to peg table to obtain smooth, glossy finish including necessary preparation of surfaces complete all as specified and directed.

S&F plastic rubber shoe white/black best quality as per existing size and shape complete all as specified and directed.

TABLE CENTRE FD-235 & FD-274: - M&L for carrying out repair and replacement of the following parts of table center.Removing carefully the existing unserviceable/damaged/boken parts of table centre and supply and fix of new parts/ components of required size and shape to match with the existing including re-assembling complete all as all as specified and directed.

S&F of table top of size 900x450mm made out of 18/19mm thick pre laminated MDF board water proof both side decorated finish and 4mm thick teak wood edging all around the top all as shown in drg complete all as specified and directed.

S&F of leg of size 60 x 30mm at top and 30 x 30mm at bottom and 372mm high made out of 1st class HW complete all as specified and directed.

S&F of long rail of size 50 x 20 x 900mm long made out of 1st class HW complete all as specified and directed.

S&F of short rail of size 50 x 20 x 450mm long made out of 1st class HW complete all as specified and directed.

Apply one coat french polish to table centre to obtain smooth, glossy finish including necessary preparation of surfaces complete all as specified and directed.

S&F plastic rubber shoe white/black best quality as per existing size and shape complete all as specified and directed.

TABLE OF SIZE 900 X 600 X 760MM WITHOUT DRAWER FD-284: - M&L for carrying out repair and replacement of the following parts of table 900x600x760mm ( 3X2') without drawer.Removing carefully the existing unserviceable/damaged parts of table 900x600x760mm without drawer and supply and fix of new parts/ components of required size and shape as per drg to match with the existing including re-assembling complete all as specified and directed.

S&F of table top made out of 18/19mm thick pre laminated MDF board water proof both side decorated finish and 4mm thick teak wood edging all around the top all as shown in drg all as specified and directed.

S&F of leg of size 60 x 30 x 740mm high made out of 1st class HW complete all as specified and directed.

S&F of long rail of size 20 x 60 x 900mm long made out of 1st class HW complete all as specified and directed.

S&F of short rail of size 20 x 60 x 600mm long made out of 1st class HW complete all as specified and directed.

S&F of stiffener of size 25 x 40x 600mm long made out of 1st class HW complete all as specified and directed.

Apply one coat french polish to table 900x600x760mm (3'x2') without drawer to obtain smooth, glossy finish including necessary preparation of surfaces complete all as specified and directed.

S&F plastic rubber shoe white/black best quality as per existing size and shape complete all as specified and directed.

TEAPOY FD-278: - M&L for carrying out repair and replacement of the following parts of teapoy. Removing carefully the existing unserviceable/damaged/broken parts of teapoy and supply and fix of new parts/ components of required size and shape as per drg to match with the existing including re-assembling complete all as specified and directed.

S&F of teapoy top of size 600x450mm made out of 18/19mm thick pre laminated MDF board water proof both side decorated finish and 4mm thick teak wood edging all around the top all as shown in drg all as specified and directed.

S&F of leg of size60 x 30 x 532mm high made out of 1st class HW complete all as specified and directed.

S&F of long rail of size 20 x 60 x 600mm long made out of 1st class HW complete all as specified and directed.

S&F of short rail frame of size 20 x 60 x 450mm long made out of 1st class HW complete all as specified and directed.

Apply one coat french polish to teapoy to obtain smooth, glossy finish including necessary preparation of surfaces complete all as specified and directed.

S&F plastic rubber shoe white/black best quality as per existing size and shape complete all as specified and directed.

TABLE WRITING FD-275: - M&L for carrying out repair and replacement of the following parts of table writing.Removing carefully the existing unserviceable/damaged/broken parts of table writing and supply and fix of new parts/ components of required size and shape as per drg to match with the existing including re-assembling complete all as specified and directed.

S&F of table top of size 1175x600mm made out of 18/19mm thick pre laminated MDF board water proof both side decorated finish and 4mm thick teak wood edging all around the top all as shown in drg all as specified and directed.

S&F of leg (35 x 55x732)mm high made out of 1st class HW complete all as specified and directed.

S&F of top long rail (25x50x790)mm long made out of 1st class HW complete all as specified and directed.

S&F of top short rail (25 x50x600)mm long made out of 1st class HW complete all as specified and directed.

S&F of bottom rail (side stiffner) (20x50x355)mm long made out of 1st class HW complete all as specified and directed.

S&F of foot rest (stiffner) (20x50x1145)mm long made out of 1st class HW complete all as specified and directed.

S&F of drawer as per existing shape and size complete all as specified and directed.

S&F of back of table writing of size (355 x 732)mm made out of 6mm thick BWR grade ply wood complete all as specified and directed.

S&F of door of cupbaord as per existing size & shape made out of 18mm thick prelamianted Particle Board beaded all around with Teak Wood beading complete all as specified and directed.

S&F of brass hinges 50mm long complete all as specified and directed.

S&F of chromium plated Knob as per existing size and, shape complete all as specified and directed.

Apply one coat french polish to table writing to obtain smooth, glossy finish including necessary preparation of surfaces complete all as specified and directed.

S&F plastic rubber shoe white/black best quality as per existing size and shape complete all as specified and directed.

TABLE DRESSING GENTS WITH MIRROR FD-230: - M & L for carrying out repair/replacement of following parts of Table Dressing Gents With Mirror as per drawing after dismantling the old parts complete all as specified :-

S&F of table top of size 900mm x 300mm made out of 18/19mm thick pre laminated MDF board water proof both side decorated finish and 4mm thick teak wood edging all around the top all as shown in drg and as directed by Engr-in-Charge.

M&L for Bottom partition using 18/19mm thick block board ISI Marked commercial of size 900 x300mm complete all as specified and directed.

Repair/replacement of drawer complete all as specified & drg complete all as specified and directed.

S&F Mirror 5mm thick of make Atul/Saint-Govin with frame of Teak wood. As per size of 410 mm x 790 mm and shape and all as specified and directed.

Applying two coats of French polish (ready made) to article after necessary preparation of surfaces complete all as specified and directed.

S&F knob CP for drawer as per existing size and shape complete all as specified and directed.

MS keyplate as existing size and shape complete all as specified and directed.

TABLE DINING 1200 x900x760MM FD/E-6/MAP-11/03: - Removing carefully the existing unserviceable/damaged parts of table dining for 4 persons and fix of new parts/ components of required size and shape as per drg to match with the existing including re-assembling complete all as specified and directed.

S&F of table top of size 1200x900mm made out of 18/19mm thick pre laminated MDF board water proof both side decorated finish and 4mm thick teak wood edging all around the top all as shown in drg all as specified and directed.

S&F of leg of size 90x45 x750mm height made out of 1st class HW complete all as specified and directed.

S&F of long rail of size (45x90x1200)mm long made out of 1st class HW complete all as specified and directed.

S&F of short rail of size (45x90x900)mm long made out of 1st class HW complete all as specified and directed.

S&F stiffner sze 90x25x900m made out of 2nd class hard wood complete all as specified and directed.

S&F of triangular bracket(as support) made out of 2nd class HW as per size and shape complete all as specified and directed.

Apply one coat french polish to table dining 3 persons to obtain smooth, glossy finish including necessary preparation of surfaces complete all as specified and directed.

S&F plastic rubber shoe white/black best quality as per existing size and shape, complete all as specified and directed.

TABLE DINING FOR 8 PERSONS FD-273 : - M&L for carrying out repair and replacement of the following parts of Table dining 8 pers.Removing carefully the existing unserviceable/damaged parts of Table dining 8 pers and supply and fix of new parts/ components of required size and shape as per drg to match with the existing including re-assembling complete all as specified and directed.

S&F of table top of size 1800x900mm made out of 18/19mm thick pre laminated MDF board water proof both side decorated finish and 4mm thick teak wood edging all around the top all as shown in drg all as specified and directed.

S&F of leg of size 40 x 75 x 732mm made out of 1st class HW complete all as specified and directed.

S&F of long rail 25 x 100 x 1800mm made out of 1st class HW complete all as specified and directed.

S&F of short rail 25 x 100 x 900mm made out of 1st class HW complete all as specified and directed.

S&F of triangular bracket (as support) made out of 2nd class HW as per required shape & size complete all as specified and directed.

Apply one coat french polish to table dining 8 persons to obtain smooth, glossy finish including necessary preparation of surfaces complete all as specified and directed.

S&F plastic rubber shoe white/black best quality as per existing size and shape complete all as specified and directed.

SOFA SET 5 SEATED/ 4 SEATED WITH DETACHABLE CUSHION FD-281: M & L for carrying out repair,/replacement of the following parts and supply & fix of new parts as under of Table Dressing Ladies as per drg all as specified and directed.

S&F of long rails of seat for three seater sofa of size 1590mmx100mmx35mm of 1st class hardwood duly plained and smoothed with sand paper complete all as specified & directed.

S&F side rails of seat for three seater sofa of size 575mmx100mmx35mm of 1st class hardwood duly plained and smoothed with sand paper complete all as specified & directed.

S&F of long rails of back for three seater sofa of size 1590mmx100mmx35mm of 1st class hardwood duly plained and smoothed with sand paper complete all as specified & directed.

S&F of long rails of seat for singel seater sofa of size 590mmx100mmx35mm of 1st class hardwood duly plained and smoothened with sand paper complete all as specified & directed.

S&F side rails of seat for single seater sofa of size 575mmx100mmx35mm of 1st class hardwood duly plained and smoothed with sand paper complete all as specified & directed.

S&F of long rails of back for single seater sofa of size 590mmx100mmx35mm of 1st class hardwood duly plained and smoothened with sand paper complete all as specified & directed.

S&F batten for single seater sofa of size 50mmx20mmx525mm of Ist class hard wood duy plained and smoothned wiith sand paper complete all as per specified and directed.

Applying one coat of french polish sofa after preparation of surface complete to sofa 3 seater complete all as specified & directed.

Applying one coat of french polish after sofa preparation of surface complete to sofa single chair complete all as specified & directed.

TABLE BEDSIDE FD-276: - M&L for carrying out repair and replacement of Table bed side (FD-276), removing carefully the existing unserviceable/damaged parts S&F of following new parts/ components of required size and shape complete all as specified & directed.

S&F of top 18mm thick BWR grade plywood of size 230x450mm fixed with 1mm thick laminated sheet at top complete all as specified and directed.

S&F of side 18mm thick BWR grade plywood of size 230x510mm fixed with 1mm thick laminated sheet at top complete all as specified and directed.

S&F of shelves 12mm thick BWR grade plywood of size 230x450mm complete all as specified and directed.

S&F of backply 6mm thick BWR grade of size 510x450mm complete all as specified and directed.

Applying one coat of french polish after preparation of surface complete to table Bedside to obtained smooth, glossy finish including necessary preparation of surface complete all as specified and directed.

CHAIR DINING CUSHIONED FD/E6/MAP-10: M&L for carrying out repair,/replacement of the following parts and supply & fix of new parts as under of Chair with Cushion Seat & Back as per drg

S&F of front legof size 350mm x 50mm x 35 mm made out of 1st class HW complete all as specified and directed.

S&F of rear leg of size 35 x50x950 mm made out of 1st class HW complete all as specified and directed.

S&F of side rail of size 25x65x450 mmmade out of 1st class HW complete all as specified and directed.

S&F of front rail of size 25x65x450mm made out of 1st class HW complete all as specified and directed.

S&F of rear rail of size 25x65x450mm made out of 1st class HW complete all as specified and directed.

S&F of stiffener of size 20 x 25mm x 450mm made out of 1st class HW complete all as specified and directed.

S&F seat made out of high density foam cushion 75mm thick and 40 density complete all as specified and directed. (Make: Sleepwell/Feather Foam/Cool Foam) thick duly covered with tapestry cloth as sample approved by GE

S&F of rubber shoes best quality as per existing size and shape complete all as specified and directed.

Polishing to chair cushion with french polish to obtain smooth glossy finish complete all as specified and directed.

TABLE DRESSING LADIES FD-251 : M & L for carrying out repair,/replacement of Table dressing Ladies (FD-251) ans S&F of following New parts all as per FD Drawing :-

S&F top of size 900 x380mm made out of 18/19mm thickpre laminated MDF board water proof both side decorated finish and 4mm thick teak wood edging all around the top all as shown in drg and as directed by Engr-in-Charge.

S&F of leg of size 45x45x75mm made out of 1st class hard wood complete all as specified and directed.

S&F of long rail of size 40x25x900mm made out of 1st class hard wood complete all as specified and directed.

S&F of short rail of size 40x25x380mm made out of 1st class Hard wood complete all as specified and directed.

S&F of drawer as per existing shape and size complete all as specified and directed.

S&F of knob CP as per size & shape complete all as specified and directed.

S&F of telescopic channel for drawer as per existing size and shape complete all as specified and directed.

S&F replacement of lod defaced of mirror of size 360x1220mm complete all as specified and directed. Make : Mode/Atul/Goldenfish with 1st class hard wood frame all around complete as per drawing

Apply of polishing to table dressing with glossy finish by applying one coats of french polish including necessary preparation of surface complete all as specified and directed.

RECANNING OF ALL TYPE OF CHAIRS: - M&L for recanning of chairs with plastic cane (oval shape) 2mm wide and border with 3mm wide cane complete as per Godrej pattern using (Make: SHAH/PREMIER) brand cane (removing of old broken cane shall be done at BSO yard)

Chair DINING FD-228, 279

Chair easy FD-17 (M), 229

Chair Writing FD-250, 280

Stool dressing CB complete all as specified and directed FD-252.

SIDE BOARD FD-241: - M&L for carrying out repair and replacement of the following parts of side board.Removing carefully the existing unserviceable/damaged parts of side board and supply and fix of new parts/ components of required size and shape as per drg to match with the existing including re-assembling complete all as specified and directed.

M&L for Top made out of 18mm thick size 1200 x 450mm pre laminated MDF board water proof , phenyl formoldehyde bonded, flat pressed three layer BWR type-II, Make: Archidlam/Novapan ISI marked fixed with mild screws as per size and shape including 4mm thick teak wood beading all around all as specified and directed.

M&L for Side 18mm thick plywood BWR of size 455 x 625mm complete all as specified and directed.

M&L for Back, 6mm thick plywood BWR of size 1220 x 625mm complete all as specified and directed.

M&L for Drawers as per drg complete all as specified and directed.

M&L for Door of size 585 x 835 x 18mm BWR plywood complete all as specified and directed.

M&L for Shelves of size 455 x 835 x 18mm thick BWR plywood complete all as specified and directed.

M&L for Leg of size 45x45mm at top 25x25mm at bottom made out of 1st class HW complete all as specified and directed.

S& F long rail size of 25 x 45 mm made out of 1st class H/W complete all as specified and directed.

S& F short rail size of 25 x 45 mm made out of 1st class H/W complete all as specified and directed.

S&F Knob, chromium plated complete all as specified and directed.

Apply one coat french polish to side board dressing to obtain smooth, glossy finish including necessary preparation of surfaces complete all as specified and directed.

TABLE BEDSIDE FD/E6/MAP/15R: - M&L for carrying out repair and replacement of the following parts of table bed side. Removing carefully the existing unserviceable/damaged parts of table bed side and supply and fix of new parts/ components of required size and shape as per drg to match with the existing including re-assembling complete all as specified and directed.

M&L for Leg madeout of 18mm MS suare pipe of 18 guage as per existing shape and size duly painted with black enamel paint complete all as specified and directed.

M&L for Top made out of 18mm thick pre laminated MDF board water proof of size 450mmx450mm including PVC edeging alroung of top complete all as specified and directed.

M&L for Side made out of 18mm thick pre laminated MDF board water proof of size500mmx450mm complete all as specified and directed.

M&L for Front Shutter made out of 18mm thick pre laminated MDF board water proof of size 400mmx300mm complete all as specified and directed.

M&L for Bottom made out of 18mm thick pre laminated MDF board water proof of size 450mmx450mm complete all as specified and directed.

M&L for back made out of 18mm thick pre laminated MDF board water proof of size600mmx450mm complete all as specified and directed.

M&L for Drawer as per existing shape and size complete all as specified and directed.

S&F Telescopic channel for drawer as per exsiting size and shape complete all as specified and directed.

S&F Auto closure hinges as per existing pattern complete all as specified and directed.

S&F Handle CP for drawer and shutter complete all as specified and directed.

S&F plastic rubber shoe white/black best quality as per existing size and shape complete all as specified and directed.

Apply one coat french polish to side board dressing to obtain smooth, glossy finish including necessary preparation of surfaces complete all as specified and directed.

CHAIR WRITING CUSHIONED FD/E6/MAP/12: M&L for carrying out repair,/replacement of the following parts and supply & fix of new parts as under of writing Chair as per drg & as per the direction of Engr-in-charge.

S&F in replacement of 50mm thick high density foam cushion for seat of size 425x400mm, edges trimmed complete all as shown on drawing duly covered with good quality tapestry cloth as per approved by GE/Eng-in-charge.

S&F 50 mm thick high density foam cushion for back including 6 mm thick foam cushion (HD) lining on back side of chair writing complete all as specified & directed

S&F in replacement of Seat made out of 9mm thick curved ply wood (5 ply) BWR grade ISI marked of size 425x400mm complete all as specified and directed.

S&F in replacement of Back made out of 9mm thick curved ply wood (5 ply) BWR grade ISI marked of size 400x300mm complete all as specified and directed.

S&F in replacement of handle as per existing size and shape (as per sample) complete all as specified and directed.

M&L for Point welding to various parts as required.

Applying one coats of 1st quality synthetic enamel paint colour OG/Black by spray machine after preparation of surface complete on existing frame work of writing chair complete all as directed by Engr-in-charge.

M&L in replacement of existing old warnout unserviceable cushion 32 density, 100mm thick of 530x560 mm size covered with tapestry cloth not less than Rs. 200/- per R/M as approved by GE.

HAT STAND WITH MIRROR FD-233: M&L for carrying out repair,/replacement of the following parts and supply & fix of new parts as under of Hat stand with mirror as per drg & as per the direction of Engr-in-charge.

S& F 4mm teak wood ply of size 1330mm x 710mm for front size as per drg complete all as specified and directed.

S&F 6mm ply for the back side of hat stand of size 1330mm x 710mm complete all as specified and directed.

S&F of size 5 mm thick looking mirror as per appropriate shape and size as per drg complete all as specified and directed.

S&F peg chromium plated peg complete all as specified and directed.

Apply one coat french polish to hat stand mirror to obtain smooth, glossy finish including necessary preparation of surfaces complete all as specified and directed.

Bin solid linen multi purpose FD-1104 & FD/E6/MAP/09: - M&L for carrying out repair and replacement of the following parts of Bin soild linen multi purpose.Removing carefully the existing unserviceable/damaged parts of Bin soild linen multi purpose and supply and fix of new parts/ components of required size and shape as per drg to match with the existing including re-assembling complete all as specified and directed.

M&L for Top made out of 18mm thick pre laminated MDF board water proof , phenyl formoldehyde bonded, flat pressed three layer BWR type-II, ISI marked fixed with mild screws as per size and shape including 4mm thick teak wood beading all around complete all as specified and directed..

M&L for Side 18mm thick plywood BWR of size 455 x 625mm complete all as specified and directed.

M&L for Back, 6mm thick plywood BWR of size 1220 x 625mm complete all as specified and directed.

M&L for Drawers as per drg complete all as specified and directed.

M&L for Door of size 585 x 835 x 18mm BWR plywood complete all as specified and directed.

M&L for Shelves of size 455 x 835 x 18mm thick BWR plywood complete all as specified and directed.

M&L for Leg of size 45x45mm at top 25x25mm at bottom made out of 1st class HW complete all as specified and directed.

S& F long rail size of 25 x 45 mm made out of 1st class H/W complete all as specified and directed.

S& F short rail size of 25 x 45 mm made out of 1st class H/W complete all as specified and directed.

S&F Knob, chromium plated complete all as specified and directed.

Apply one coat french polish to side board dressing to obtain smooth, glossy finish including necessary preparation of surfaces complete all as specified and directed.

Please Enable Macros to View BoQ information