Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹4.6 LAccepted-AOC MARIYIL HOUSE MANIPPARA P O KARIMBAN IDUKKI 685602 | IDUKKI | KERALA | 685602 | L1 | Accepted-AOC LOWEST AMOUNT QUOTED BY SHAJI JOSEPH | |
| 2 | L2₹4.7 L+₹3,378.74 (0.73%)Rejected-AOC | L2 | Rejected-AOC LOWEST AMOUNT QUOTED BY SHAJI JOSEPH |
| Sl No | Description | Qty | Unit | Shaji Joseph (Maryil Constructions) L1 | kurian L2 |
|---|---|---|---|---|---|
| 1.00SAMSKARIKA NILAYAM ROOFING | |||||
| 1.00 | 50.10.1:Steel work in built up G I tubular ( round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting,fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete | 659.95 | kg | 253.56 ₹1,67,336.92 Lowest | 255 ₹1,68,287.25 |
| 1.00 | 50.10.2:Steel work for purlin/single section with G I pipes including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete | 309.54 | kg | 205.38 ₹63,573.33 Lowest | 210 ₹65,003.4 |
| 1.00 | 12.4.2:Providing ridges or hips width 60 cm overall width plain G.S. sheet fixed with polymer coated J or L hooks, bolts and nuts 8 mm dia G.I. limpet and bitumen washers complete.0.63 mm thick with zinc coating not less than 275 gm/m2 | 37.9 | metre | 1,033.82 ₹39,181.78 Lowest | 1,050 ₹39,795 |
| 1.00 | 12.50:Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+0.05%), total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. | 153.45 | sqm | 924.67 ₹1,41,890.61 Lowest | 925 ₹1,41,941.25 |
| 1.00 | 13.61.1:Painting with synthetic enamel paint of approved brand and manufacture to give an even shade:Two or more coats on new work | 29.43 | sqm | 181.02 ₹5,328.32 Lowest | 185 ₹5,445.48 |
| 1.01 | 50.18.8.8.1:Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge. Concealed work, including cutting chases and making good the wall etc. 75 mm pipe 6 Kgf/cm2 | 24 | metre | 772.57 ₹18,541.68 Lowest | 775 ₹18,600 |
| 1.01 | 50.18.9.13.2:Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 25 mm dia 10 Kgf/cm2- External work - Exposed on wall | 4 | metre | 338.56 ₹1,354.24 Lowest | 340 ₹1,360 |
| 1.01 | 50.18.9.14.2:Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. this includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 32 mm dia 6 Kgf/cm2 - External work - Exposed on wall | 4 | metre | 382.99 ₹1,531.96 Lowest | 385 ₹1,540 |
| 1.01 | OD324669/2025-2026:Supplying and fixing 160 mm square PVC gutter pipe including cost of conveyance labour charges as per the direction of Departmental Officers at site. | 48.4 | metre | 537 ₹25,990.8 Lowest | 540 ₹26,136 |
Tender Value
₹4.2 L
EMD Value
₹10,581
Closing Date
18 Mar 2026, 6:00 pmClosed
ASSI.EXECUTIVE ENGINEER
ASSI.EXECUTIVE ENGINEER LID EW DIVISION IDUKKI DP PAINAVU
Annual Plan-IDP-2025-26 MARIYAPURAM G P- NEW MOUNT SAMSKARIKA NILAYAM ROOFING-1120/26-General Civil Work
2026_LSGD_845185_20
19/T/AEE/LID EW/IDK/2025-2026
Open Tender
Civil Works - Others
Item Rate
300 days
MARIYAPURAM GP
Please refer Tender documents.
10 documents required · 10 mandatory
₹935
Yes
₹10,581
Yes
14 Jul 2026
9 Mar 2026
21 Mar 2026
9 Mar 2026
18 Mar 2026
9 Mar 2026
9 Mar 2026 - 18 Mar 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1SAMSKARIKA NILAYAM ROOFING | |||||
| 1.001 | 50.10.1:Steel work in built up G I tubular ( round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting,fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete | - | kg | - | - |
| 1.002 | 50.10.2:Steel work for purlin/single section with G I pipes including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete | - | kg | - | - |
| 1.003 | 12.4.2:Providing ridges or hips width 60 cm overall width plain G.S. sheet fixed with polymer coated J or L hooks, bolts and nuts 8 mm dia G.I. limpet and bitumen washers complete.0.63 mm thick with zinc coating not less than 275 gm/m2 | 1 | metre | - | - |
| 1.004 | 12.50:Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+0.05%), total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. | 1 | sqm | - | - |
| 1.005 | 13.61.1:Painting with synthetic enamel paint of approved brand and manufacture to give an even shade:Two or more coats on new work | 1 | sqm | - | - |
| 1.006 | 50.18.8.8.1:Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge. Concealed work, including cutting chases and making good the wall etc. 75 mm pipe 6 Kgf/cm2 | - | metre | - | - |
| 1.007 | 50.18.9.13.2:Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 25 mm dia 10 Kgf/cm2- External work - Exposed on wall | - | metre | - | - |
| 1.008 | 50.18.9.14.2:Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. this includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 32 mm dia 6 Kgf/cm2 - External work - Exposed on wall | - | metre | - | - |
| 1.009 | OD324669/2025-2026:Supplying and fixing 160 mm square PVC gutter pipe including cost of conveyance labour charges as per the direction of Departmental Officers at site. | 1 | metre | - | - |
stage.html
html • 0.04 MB
tech_eval.pdf
fin_eval.pdf
aoc.pdf
finance_1428104.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Tendernotice_1.pdf
PDF • 6.11 MB
NIT.pdf
Tender Documents • 0.03 MB
BOQ_1428104.xls
BOQ • 0.30 MB
BID.pdf
Additional Documents • 2.08 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .