Stock Storage under Jal Shakti Sub Division Sarkaghat Division Sarkaghat in Tehsil Sarkaghat Distt Mandi HP

Providing and fixing pre-laminated flat pressed 3-layer (medium density) particle board or graded wood particle board, IS:3087 marked, with one side decorative and other side balancing lamination, Grade I, Type II, exterior grade, IS:12823 marked, in shelves with screws and fittings wherever required, edges painted with polyurethane primer; fittings paid separately - 18 mm thick.

Providing and fixing plywood 4 mm thick, one side decorative veneer conforming to IS:1328 (Type-I), for plain lining/cladding with necessary screws, including priming coat on unexposed surface, with decorative veneer facings of approved manufacture.

Providing and fixing decorative high-pressure laminated sheet of plain/wood grain in gloss, matt or suede finish, with high-density protective surface layer and reverse side of adhesive-bonding quality conforming to IS:2046 Type S, including cost of adhesive of approved quality - 1.0 mm thick. Applied to the measured exposed exterior faces of almirahs/cabinets and to table/counter tops and all exposed table sides.

Providing and fixing special quality chromium plated brass cupboard lock with six levers of approved quality, including necessary screws, complete - size 40 mm.

Providing and fixing bright/matt finished stainless steel handle of approved quality and make with necessary screws, complete - 75 mm.

Providing and fixing IS:12817 marked stainless steel butt hinge 75 x 47 x 1.80 mm with stainless steel screws, complete.

Providing and fixing powder coated telescopic drawer channels 300 mm long with necessary screws, complete as per directions of Engineer-in-Charge.

Providing and fixing 50 mm long expandable fastener with necessary plastic sleeve and galvanised M.S. screw, including drilling holes in masonry/CC/RCC and making good, complete. Quantity: six fasteners for each of seven wall-mounted furniture units.

Removing dry or oil bound distemper by washing and scraping and sand papering the scraping and sand papering the wall surface smooth including necessary repairs to scratches complete.

Distempering (one Coat) with oil bound washable distemper of approved brand & of required Shade on existing decorated wall surfaces to give an even Shade after thoroughly brushing the surface free from mortar dropping and other foreign matter and also including preparing the surface even and sand papered smooth direction and to the entire satisfaction of engineer-in -charge up to all lead and lift. Priming coat with distemper primer as per direction and to the entire satisfaction of Engineer-in-charge up to all lead and lifts.