COMPREHENSIVE MAINTENANCE OF MD/OTM ACCN OF SECTOR I AND II OF SMA RAMESWARAM UNDER GE FORT KOCHI

Amount

Attending the following day to day maintenance complaints and repair works of Md and OTM accn at Sector I & II of SMA Rameswaram Quarters and rectify the complaints to the entire satisfaction of Engineer-in-Charge. Note :- (i) Complaints will be attended on Sunday/Holiday also. (ii) Complaints/Job cards shall be collected from complaint cell by 0900 Hrs everyday and trade men should submit the feedback of complaints the same day by 1730 Hrs. (iii) The trademen shall wear uniform incl all necessary safety gear.

S & F in repairs PVC connections 15mm size with PTMT nuts of length 450 mm long complete all as specified and directed.

S & F in repairs PVC connections 15mm size with PTMT nuts of length 600 mm long complete all as specified and directed.

Taking down 15/16 mm bore UPVC / CPVC / PPR pipe and connections incl cleaning for refixing or removal from site complete all as specified and as directed.

Taking down 20 to 25 mm bore UPVC / CPVC / PPR pipe and connections incl cleaning for refixing or removal from site complete all as specified and as directed

Taking up or down 40/50 mm bore UPVC / CPVC / PPR pipe and connections incl cleaning for refixing or removal from site complete all as specified and as directed

S& F CPVC pipes 16mm, SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors including necessary fittings/ joints complete all as specified and as directed.

S& F CPVC pipes 20mm, SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors including necessary fittings/ joints complete all as specified and as directed.

S& F CPVC pipes 40mm, SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors including necessary fittings/ joints complete all as specified and as directed.

S& F CPVC pipes 50mm, SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors including necessary fittings/ joints complete all as specified and as directed.

M & L for minor plumbing work to stopping leakages of CPVC pipes of any size upto 4th floor in shafts incl all necessary safety precaution and staging works upto 1 mtr length of pipe including fittings complete all as specified and as directed.

M & L for for minor plumbing work to stopping leakages of CPVC pipes of any size 5th to 8th floor in shafts incl all necessary safety precaution and staging works upto 1 mtr length of pipe including fittings complete all as specified and as directed.

M & L for for minor plumbing work to stopping leakages of CPVC pipes of any size 9th to 12h floor in shafts incl all necessary safety precaution and staging works upto 1 mtr length of pipe including fittings complete all as specified and as directed.

M & L for for minor plumbing work to stopping leakages of CPVC pipes of any size in terrace upto 1 mtr length of pipe including fittingscomplete all as specified and as directed.

S&F 16 mm dia plain CPVC SDR11 stop/ball valves fitted to pipe on walls/ceiling or laying in floors complete all as specified and as directed.

S& F CPVC reducer socket 50mm x 15/20 mm fitted to pipe on walls/ceiling or laying in floors complete all as specified and as directed.

S& F CPVC brass elbow 50mm dia fitted to pipe on walls/ceiling or laying in floorscomplete all as specified and as directed.

S& F CPVC union socket 50mm dia fitted to pipe on walls/ceiling or laying in floors complete all as specified and as directed.

S& F CPVC brass adaptor socket one side threaded and other end pasting 50mm / male threaded fitted to pipe on walls/ceiling or laying in floors complete all as specified and as directed.

Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to store (measured overall as fixed along the centre line over fittings and accessories) complete all as specified and as directed.

S & F 110mm bore PVC (SWR) pipes single socketed in any length with stainless steel step clamps of suitable size with nuts and bolts etc. as per the requirement at site and fixed to walls/ laid in floors complete all as specified and as directed.

S & F 75mm bore PVC (SWR) pipes single socketed in any length with stainless steel step clamps of suitable size with nuts and bolts etc. as per the requirement at site and fixed to walls/ laid in floors complete all as specified and as directed.

S&F 110mm bore PVC (SWR) junction single (Single T) equal or unequal complete all as specified and directed by Engr-in-Charge.

S&F 75mm bore PVC (SWR) junction single (Single T) equal or unequal complete all as specified and directed by Engr-in-Charge.

S&F 110mm bore PVC (SWR) branch piece, single (single Y) equal or unequal complete all as specified and directed by Engr-in-Charge.

S&F 75mm bore PVC (SWR) branch piece, single (single Y) equal or unequal complete all as specified and directed by Engr-in-Charge.

S&F 110mm bore PVC (SWR) bends any radius complete all as specified and directed by Engr-in-Charge.

S&F 75mm bore PVC (SWR) bends any radius complete all as specified and directed by Engr-in-Charge.

S&F bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required & hold fasts confirming to Fe-290 Grade-E-165 complete all as specified and as directed by the Engineer-in-Charge.

S&F 110mm bore PVC (SWR) vent cowl complete all as specified and directed by Engr-in-Charge.

S&F 75mm bore PVC (SWR) vent cowl complete all as specified and directed by Engr-in-Charge.

S & F in repair 75mm PVC (SWR) floor trap, with CP grating including jointing to waste pipe fixed in cement concrete type B-1(1:2:4) complete all as specified and directed by Engr-in-Charge.

S & F in repair 100mm PVC (SWR) nahani trap, with CP grating including jointing to waste pipe fixed in cement concrete type B-1(1:2:4) complete all as specified and directed by Engr-in-Charge.

Demolition of cement concrete (unreinforced) in ground floors and pavings not exc 15 cm thickness (below or above ground level) complete all as specified and directed.

M&L for Cement concrete, 1:5:10, type E2, using 40mm graded stone aggregate as filling under sunken floors complete all as specified and directed.

M&L 40 mm thick PCC 1:2:4, type B1, using 20 mm graded stone aggregate as padding concrete in Sunken floor finished even and smooth without using extra cement complete all as specified and directed.

M&L for apply two coats of brushbond of M/s Fosroc or equivalent all sides and bottom of sunken slab and providing 10 mm thick CM 1:3 with water proofing liquid. Mix the part A and part B of the polymer modified cementitious coating mechanically using an electrically operated drilling machine fitted with mix paddle. Apply the same in two coats over the prepared surface one after the other dries up with a minimum interval of 4 hours between the coats. Providing pressure grouting in suspected areas of vertical and horizontal joints. The rate shall include all materials, machinery, labour etc. complete. Note : 10 Years Gurantee certificate to be submitted by Contractor

S&F in repairs health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and directed.

Dismantling water tanks n exc. 250 ltrs and removing to store complete all as specified and directed.

S&F 3 layer loft tank (white colour) of 250 ltrs capacity including PVC float valve and all necessary fittings complete all as specified and directed.

Supply and fix in repairs, Soap dish any type fixed to plug with chromium plated fitted to walls with CP/ Brass screws complete all as specified and as directed by the Engineer-in-Charge.

S & F in repair chromium plated shower rose 125 mm dia with swivel joints including fixing to steel/ CPVC pipe or union complete all as specified and as directed by the Engineer-in-Charge.

S&F in repairs cast copper alloy chromium plated bib taps 15mm bore fancy type, screwed down, screwed for iron pipe/ CPVC pipe or for brass ferrule complete all as specified and as directed by the Engineer-in-Charge.

Supply and fix two way long body CP bib cock quarter turn,15mm with wall flange complete all as specified and directed.

Supply and fixing stop valves, cast copper alloy, fancy type chromium plated with long shank and cup (concealed type) , screwed down ,high pressure with crutch or butterfly handle, screwed both ends for 15mm bore iron pipe or for unions and fixed in repair complete all as specified and directed.

S&F in repairs 15mm bore chromium plated fancy type angle stop valve with wal flange complete all as specified and directed. Make: Jaquar Cat Part No CON 053KN or equivalent in Cera/Kohler/Marc as approved by GE.

S&F in repairs, chromium plated single lever wall mixture with provision for overhead shower with 115mm long bend pipe on upper side, connecting legs and wall flanges complete all as specifed and directed.

S & F in repair cast copper alloy ball brass valves (float valve), high pressure, with polyethene float and flynut complete screwed for CPVC pipe of 15mm dia complete all as specifed and directed.

Supply and fix in repair 15mm bore CP fancy type pillar tap for wash hand basin complete all as specified and directed.

S&F in repairs 32mm bore bottle trap of PTMT having minimum water seal of 25mm (minimum weight 32mm-260 gms), and bore dia of discharge pipe 32mm complete all as specified and as directed.

Disconnecting cleaning and servicing of bottle traps and reconnecting to WHB complete all as specifed and directed.

Dismantling boarding, any description, fixed in any position with nails complete all as specifed and directed.

S&F Anodised aluminium frame for cupboards and shutter including joining cleat for fixing & push button handle set with key locking arrangement for shutter as approved by GE complete all as specifed and directed.

S&F prelaminated MDF board, not less than 5.5mm thick exterior grade, fixed to aluminium frame with necessary fittings complete all as specifed and directed by Engr-in-charge.

S & F 18 mm thick Solid plain PVC Sheet suitably fixed as in shelves and partitions in cupboards with stainless steel screws and glue complete all as specified and directed.

S & F in repairs 18 mm thick Solid plain PVC Sheet suitably fixed as in shelves and partitions in cupboards with stainless steel screws and glue icomplete all as specifed and directed

S&F 18/19 mm thick Prelaminated HDF board, interior grade, prelaminated one side with decorative choice lamination and other side balancing white lamination with matching colour edge binding, fixed with 04 Nos SS box hinges per shutter to CB timber frame complete all as specifed and directed

S & F Aluminium alloy wire cloth, 0.45mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminium wire staples complete all as specifed and directed

S & F in repair Aluminium alloy wire cloth, 0.45mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminium wire staples complete all as specifed and directed

S & F 4mm thick sheet/ float glass, ordinary quality and glazing fixed in aluminium window shutters area of each pane n. exc .5 sq. m in each pane including taking out old serviceable glass of any description, from old wooden or metal frames, or stone, concrete or brick surrounds, any thickness or size; hacking out old putty or removing beads etc, including making good breakages in taking out and removed off from premises complete all as specifed and directed.

S & F 4mm thick sheet/ float glass, ordinary quality and glazing fixed in aluminium window shutters area of each pane exc .5 sqm complete all as specified and directed.

S&F Stainless steel Kitchen Plate Rack of size 600 mm x 600 mm x 250 mm of 0.5mm thick fixed with plugs screws, washers and waster, including necessary chipping/drilling holes to fix on wall suitable size in wall as per IS specification complete all as specifed and directed

S&F in repairs sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm, bowl size 410mm x 330mm x160mm complete all as specifed and directed

Resecuring chowkhats or frames with shutter, without taking down exc 1.5 sqm and not exc 4 sqm to door shutters complete all as specified and directed by Engr-in-Charge.

Resecuring or easing and adjusting without taking down shutter n exc 1 sqm each complete all as per specified and directed.

Resecuring or easing and adjusting without taking down shutter area exc 1sqm and n exc 2 sqm complete all as per specified and directed.

Taking down shutters and refixing in same opening resecuring after easing and adjusting, exc 1sqm and n exc 2sqm complete all as per specified and directed.

Taking down shutters and refixing in same opening resecuring after easing and adjusting not exc 1 Sqm complete all as per specified and directed.

S & F in repairs SS continuous (piano) hinges , mild steel, bright finish or electrogalvanised, with width of flap 30mm complete all as per specified and directed.

S & F in repair 100mm aluminium anodised, barrel tower bolts of extruded section complete all as per specified and directed.

S & in repairs 150mm aluminium anodised, barrel tower bolts of extruded section complete all as per specified and directed.

S&F in repair 200mm size PVC sliding door bolt with hasp, staple (bolt type) and fixing clips of PVC and fixing bolts suitable for PVC door shutters complete all as specified and as directed by the Engineer-in-Charge.

S&F in repair 125mm size PVC door handle suitable for PVC door shutters complete all as specified and as directed by the Engineer-in-Charge.

S & F in repairs butt hinges 75mm, medium weight, cold rolled and mild steel complete all as per specified and directed.

S & F in repairs butt hinges 125mm , medium weight, cold rolled and mild steel complete all as per specified and directed.

S & F in repairs 200mm, mild steel ordinary rat tail rod pattern springs including roller and roller plate complete all as per specified and directed.

S & F in repairs 100mm aluminium anodised handles, cast type complete all as per specified and directed.

S&F in repairs hasp & staple,100 mm size, safety type, aluminium anodised with mild steel hinge pins including bolt to hinge plate and fixed with screws complete all as per specified and directed.

S&F in repair 75mm long floor door stopper, aluminium anodised with rubber bush complete all as per specified and directed.

S & F in repair fancy type powder coated aluminium curtain rods conduit not less than 18 mm inner dia complete all as specified and directed.

S & F in repair fancy type powder coated MS/aluminium brackets suitable for curtain rods fancy type powder coated conduit not less than 18 mm dia complete all as specified and directed.

Supply and fix in repair tubular towel rail, brass chromium plated, 20mm dia, D type, 60 cm long between flanges all as specified and as directed by the Engineer-in-Charge. Make: Jaquar Cat Part No CAN 1111SM r or equivalent as approved by GE

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles and rubbish off the premises complete all as specified and directed.

M&L for coloured non skid ceramic coloured tiles 7 to 8 mm thick area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm, in foors etc. set and jointed in cement slurry in isolated area not exceeding 3 Sqm and pointed in white or coloured cement to match over and including 10 mm thick screed bed in CM (1:4) complete all as specified and as directed.

M&L for coloured non skid ceramic coloured tiles 7 to 8 mm thick area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm, in foors etc. set and jointed in cement slurry in isolated area not exceeding 3 Sqm and pointed in white or coloured cement to match over and including 10 mm thick screed bed in CM (1:4) complete all as specified and as directed.

M&L for coloured non skid ceramic coloured tiles 7 to 8 mm thick area of each tile exceeding 0.18 Sqm but not exceeding 0.38 Sqm, in foors etc. set and jointed in cement slurry in isolated area not exceeding 3 Sqm and pointed in white or coloured cement to match over and including 10 mm thick screed bed in CM (1:4) complete all as specified and as directed.

M&L for glazed ceramic coloured tiles of size 300x200/400x250 mm x 7-8 mm thick on vertical surface such as skirting, dados, risers to steps etc set jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles over and including 10 mm thick backing coat in CM (1:3) in isolated patches not exceeding 1.5 Sqm all as specified and as directed.

M&L for minor plumbing work such as refixing of flushing cistern etc. or any other similar work including dismantling and refixing the same after repair and cleaning complete including material likes screws and rawl plugs complete all as per specified and directed.

M&L for minor mason work such as joint filling, refixing of existing tile, plastering work area n. exc 0.1 Sqm each complete including material complete all as per specified and directed.

M&L for minor mason work such as joint filling, around and inside floor/Nahani trap with white cement to arrest leakage seepage in below floor complete including appliation of chemical water proof treatment to below celing complete all as per specified and directed.

M&L for making 3 mm grooves with cutting machine in floor/wall tiles, filling with epoxy joint filler MYKLAT KRETE SP 100 (Part A, B & C) or equivalent make including filling around floor trap to arrest seepage leakage complete all as specified and directed.

M&L for minor mason work such as joint filling, of wall tiles with eppoxy including making 4mm joint grooves to arrest leakage seepage complete all as per specified and directed.

M&L for minor mason work such as joint filling around PVC rain water pipes at terrace with CM 1:3 complete all as per specified and directed.

M&L for minor mason work such as filling opening around PVC water pipes at terrace with PCC 1:2:4 type B-0 complete all as per specified and directed.

M&L for minor mason work such as filling around rain water pipes on wall with PCC 1:2:4 type B-0 and finished with plastering in CM 1:6 complete all as per specified and directed.

M&L for minor carpenter work such as refixing of curtain rod and brackets, tower bolts, sliding bolts, hinges, hasp and stapple, knobs etc complete including material complete all as per specified and directed.

Raking out/ peeling off decayed wooden part from wooden door frame and shutters and applying anti termite/borer chemical TERMINATOR to the affected area , filling the affected area with a mixture of saw dust , cement putty and white cement , levelled uniformly to match with other part of shutter and finally applying a coat of primer and two coat of enamel paint to match complete all as specified and directed.

Making good bottom ends of wooden /steel door frames by removing decayed/ rusted portion and filling with concrete and finished to match the frame complete all as specified and directed.

Filling gaps between chowkats of door and windows with crack filler and finishing uniformly to match the existing surface complete all as specified and directed.

Demolition of cement concrete unreinforced in ground floor or any floor level, PCC curbs and pavings not exceeding 15cm thickness (below or above ground level) and removal unserviceable materials, debris and rubbish to a distance not exceeding 100m all as specified and directed by Engineer-in-charge.

M &L for PCC 1:2:4 type B1 (20 mm aggregate) as in kerbs for handrails and similar items including formwork, hold fast bed block, filling in pressed steel frame, window cills,completeall as specified and directed by Engineer-in-charge

S & F 4mm dia PVC coated cloth drying wire incl hookes at both ends fixed to walls complete all as specified and directed by Engineer-in-charge

Removal of choke in nahani trap or floor trap in WHB, kitchen and toilets complete all as specified and as directed.

Removal of choke of rain water pipe at terrace complete all as specified and as directed.

Making 50mm dia holes in RCC parapet and providing UPVC pipe 50mm dia 60 cm lomg spouts and making good complete all as specified and as directed.

Dismantling and servicing including removal of choke, renewal of rubber washer and refixing in same postion items like 15mm dia bib taps, pillar taps , angle valves, stop cocks, mixer valves, health faucet, PVC connections, float valves of FT etc complete all as specified and as directed.

S&F in repairs ball valves high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed (Minimum weight 20mm-210gms) for 20mm bore pipe, as in loft tank complete all as specified and directed.

S&F in repairs ball valves high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed (Minimum weight 15mm-142gms) for 15mm bore pipe, as in loft tank complete all as specified and directed.

S&F in repairs PVC flush tank float valve with ball complete all as specified and as directed.

S&F in repair PVC syphon assembly suitable for PVC low level flushing cistern complete all as specified and as directed.

S&F in repair rubber washer suitable for PVC syphon assembly of PVC Flushing cistern complete all as specified and as directed.

S&F in repair flush tank knob with lever rod suitable for PVC Flushing cistern complete all as specified and as directed.

S&F in repair PTMT Floor trap grating doom/ jalli 100mm dia with square frame150x150mm complete all as specified and as directed.

S & F in repairs 10 ltrs capacity PVC valve less, syphonic action type, flushing cistern, low level, white with inlet, ball valve, float and handle including brackets, flush pipe of 32 mm dia complete all as specified and directed by Engineer-in-charge.

S&F in repair PVC ' L' type flush pipe white colour, of standard length suitable for low level PVC Flushing cistern for EWC complete all as specified and as directed.

S&F in repair PVC ' L' type flush pipe white colour, of standard length suitable for high level PVC Flushing cistern for IWC complete all as specified and as directed.

S&F in repair brass spindle suitable for 15 mm dia bib taps, pillar taps ,angle valves, stop cocks , mixer vlaves and similar articles complete all as specified and as directed.

S&F in repair SS knob / head suitable for 15 mm dia bib taps, pillar taps, angle valves, stop cocks , mixer vlaves etc complete all as specified and as directed.

S & F in repair PVC ball suitable for ball float valve 20mm dia complete all as specified and as directed.

S & F in repair aluminium connecting rod suitable for ball float valve 20mm dia complete all as specified and as directed.

S&F in repairs 32mm bore waste coupling of PTMT (half or full threaded, Minimum weight 5gms/40mm-60 gms) suitable for wash basins complete all as specified and as directed.

S&F in repairs 40mm bore waste coupling of PTMT (half or full threaded, Minimum weight 5gms/40mm-60 gms) suitable for kitchen sink complete all as specified and as directed.

S&F 32mm bore, 90 cm long, PVC flexible waste pipe suitable for wash basin/ kitchen sink complete all as specified and as directed.

M&L for preparing old treated surface and applying two coats of damp seal coat Hydralock of make Asian Paints/ Dr. Fixit/Syka or equivalent make as approved by GE complete all as specified and as directed. .

Taking out decayed/damaged styles/rails of wooden doors and replacing the same with new style/rails of 35 mm thick second class hard wood, to match with the door shutter including two coat of synthetic enamel paint over a coat of primer complete all as specified and as directed by the Engineer-in-Charge.

Taking out decayed/damaged styles/rails of window and replacing the same with new style/rails of 30 mm thick second class hard wood, to match with the window shutter including two coat of synthetic enamel paint over a coat of primer complete all as specified and as directed by the Engineer-in-Charge.

Taking down chowkhat with shutter (without taking off shutters from the frames) not exc 1.5 sqm each complete all as specified and as directed.

Taking down chowkhat with shutter (without taking off shutters from the frames) exc 1.5 sqm each complete all as specified and as directed.

Taking down shutters of any description n exc 1 sqm each complete all as specified and as directed.

Taking down shutters of any description exc 1 sqm and n exc 2 sqm each complete all as specified and as directed.

Taking down shutter of any description exc 1 sqm and n exc 2 sqm each and refixing in same opening after repair complete all as specified and as directed.

S & F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, supplying & fixing in opening as per specification & drawing complete all as specified and as directed.

S & F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing complete all as specified and as directed.

S&F pressed steel frames of size 105mmx60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc, complete all as specified and as directed.

S&F pressed steel frames of size 125mmx60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc, complete all as specified and as directed.

S & F 2nd class hard wood, plain, solid, straight chowkats and frames wrought framed rebated on the solid, rounded or chamffered put together with glue pinned at joints supplied and fixed complete all as specified and as directed. Note : Necessary preservation to timber shall be carried out all as specified and the rate quoted is inclusive of this preservation

S & F second class hard wood 35mm thick plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers: supplied and fitted to chowkats complete all as specified and as directed.

S&F 2nd class hard wood, 35mm thick glazed and skeleton shutters with 8 panels, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats complete all as specified and as directed. Note : Necessary preservation to timber shall be carried out all as specified and the rate quoted is inclusive of this preservation

S & F second class hard wood 30mm thick glazed and skeleton shutters, open rebated and prepared to receive glass,gauze, etc. (with sash bars), edges of framing plain, chamfered or rounded fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats but divided into squares, with plain, chamfered or rounded, mitred and rebated sash bars, any numbers complete all as specified and as directed.

S & F 2nd class hard wood small fittings such as brackets of any type, latch and hinge blocks, shaped door and window stops and the like, including all necessary' labours; articles n exc 200 cucm each complete all as specified and as directed.

S & F in repairs 2nd class hard wood small fittings such as brackets of any type, latch and hinge blocks, shaped door and window stops and the like, including all necessary' labours; articles n exc 200 cu. cm each complete all as specified and as directed.

S & F butt hinges 100mm, medium weight, cold rolled and mild steel complete all as specified and as directed.

S & F in repairs butt hinges 100mm , medium weight, cold rolled and mild steel complete all as specified and as directed.

S & F 200mm aluminium anodised, barrel tower bolts of extruded section complete all as specified and as directed.

S & F 300mm size aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy complete all as specified and as directed.

S & F in repairs 300mm size aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy complete all as specified and as directed.

S & F 150mm aluminium handles, cast type, anodised complete all as specified and as directed.

S & F in repairs 150mm aluminium handles, cast type, anodised complete all as specified and as directed.

M & L for preparation of new untreated wood or wood based surfaces of any description, not otherwise described, over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed.

Material and labour for preparation of old painted wooden surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint all as specified and directed.

M & L for preparation of new or previously untreated steel surfaces of any description, over 10cm in width or girth, not otherwise described applying with two coats of synthetic enamel paint over a coat of red oxide or zinc chrome primer complete all as specified and as directed.

Taking down cement or cement lime plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc complete all as specified and as directed.

M & L for rendering 8mm thick in CM 1:4 using liquid WPC over 12mm thick rendering in CM 1:6 on fair faces of brick work or concrete surfaces finished even and fair without using extra cement at any floor complete all as specified and as directed. Note: Water proofing compound shall be paid separately.

Supply only liquid water proofing liquid complete all as specified and as directed.

M&L for rendering 10mm thick in CM 1:6 finished even and smooth without using extra cement with Water proofing liquid 200 ml per bag of cement complete all as specified and as directed. Note: Water proofing liquid will be measured separately

M&L for rendering 5mm thick in CM 1:3 on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement as on ceiling with Water proofing liquid 200 ml per bag of cement complete all as specified and as directed.

M&L for preparation of new plastered surface of wall and applying two coats of acrylic exterior emulsion paint over a coat of alkali resitant primer using rollers made from foam or synthetic fibres over two coats of external cement putty (minimum thickness 1 mm), to get a smooth and tint free surface, upto 4 storey height complete all as specified and directed by Engineer-in-Charge.

M & L for preparing newly plastered surfaces of wall and applying two coats of acrylic distemper over a coat of wall care putty ( minimum thickness 1mm) and priming coat after preparing the wall surface by using SikaLatex with cement mortar as per the manufacturer instructions complete all as directed by Engineer-in-Charge. Note : The rates are including cement mortar for SikaLatex.

M & L for preparing newly plastered surfaces of ceiling and applying three coats of white wash on ceiling complete all as specified and as directed.

M&L for preparation of old treated surfaces of wall by brooming down, filling the cracks properly and finally washing with water jet of wall and applying one coat of acrylic distemper using rollers made from foam or synthetic fibres, to get a smooth and tint free surface complete all as specified and directed by Engineer-in-Charge.

M&L for preparation of old decorated surfaces of wall and applying one coat of white wash complete all as specified and as directed.

M&L for preparing old decorated surfaces of ceiling and applying one coat of white wash on ceiling complete all as specified and as directed.

S & F standard aluminium deco grills including making arrangement for opening window (wt not less than 3 kg per Sqm) grill shall be fixed with suitable clip beading /clamps complete all as specified and as directed.

S&F UPVC white sliding window with fly proof section no AP-102, sliding frame with mesh track, AP-104 sliding window sash, AP-108 sliding window mesh, AP-106 inter lock, AP-110 Glazing bead fitting touch lock complete all as specified and as directed. Note:- Glazing and fly proofing shall be measured and paid separately

S & F powder coated aluminium frame for doors, windows, ventilator, cupboards with one or more rebates including joining cleat for fixing and locking arrangement for window/cupboard shutter, ventilator etc. complete all as specified and as directed.

M & L for 16mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite, set and jointed in neat cement slurry over 20mm thick screed bed in CM 1:4 and pointed in white or coloured cement to match the shade complete all as specified and directed.

S & F in repairs Vitreous China wash down water closet pan (pedestal pattern), white including 'P' or 'S' trap 100mm dia plastic water closet seat, black or white, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device (including fixing bolts but excluding flushing cistern and flush pipe) complete all as specified and as directed.

S & F in repairs vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm or nearest available size as approved, white, with integral foot rests (excluding flushing cistern and flush pipe) including provision of cement concrete bedding complete all as specified and as directed.

S&F vitreous China, semi-pedestal pattern (Anglo-Indian Type) white including 'P' or 'S' trap 100mm dia, plastic water closet seat, black or white, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device (including fixing bolts but excluding flushing cistern and flush pipe) complete all as specified and as directed.

S & F in repairs plastic water closet seat, black or white, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified and as directed.

S & F in repair vitreous China wash basin, white, flat back, size 550x400mm or nearest available size as approved including taps, waste coupling, chain and plug and including brackets/ fixing with bolts etc. as per manufactures instructions complete all as specified and as directed.

M&L for drilling and fixing of Nozzle: Make groove at every 150mm c/c in the brick masonry wall perpendicular to the direction of crack. Provide 20 mm dia nozzle for the grouting. Provide 8 mm dia reinforcement perpendicular to the direction of the crack complete all as specified and as directed. Note:- The rate shall include the cost of all the operations and etc complete.

M&L for injection of cement grout: Prepare AR mortar in the ratio of 1:3. Add 1 litre of Nitobond AR per bag of cement or any equivalent to the above mortar mix and apply to the primed concrete surface using a trowel. The dosage of AR shall be 1 lit per bag of cement. Grout the same using cement grout mixed with copolymer (SBR) of 1 lit per bag of cement and cut the nozzle after completing. Fill up the crack using the same and followed by a smooth finish complete all as specified and as directed. Note:- The rate shall include the cost of all the operations and etc complete.

Chip and remove all damaged and de bonded concrete and plaster from the RCC column, beam, flights, landing, railing and slabs by manually or mechanically so as to expose the corroded reinforcement bars including the rent of tools, scaffolding complete at any height and labour charges for dumping the debris within a radius of 100 meters complete all as specified and as directed by the Engr-in-Charge

Supply and application of rust remover/converter (Rebaklense RR of M/s Fosrock Chemicals India Ltd) or Amandur, (Manufactured by GK Technocom) over the corroded reinforcement bar where ever micro concreting is required and cleaning the same after application including the cost of all materials, rent of tools, scaffolding cost of brush etc complete all as specified and as directed by the Engr-in-Charge

Supply and application of Nitozinc Primer (Manufactured by M/s Fosrock Chemicals India Ltd) over the exposed steel reinforcements after removing the rust scales from the exposed reinforcement rods in one square meter area including the cost of all materials rent of tools, scaffolding, cost of paint brush, etc complete all as specified and as directed by the Engr-in-Charge

Supply and application of Nitobond EP (Manufactured by M/s Fosrock Chemicals India Ltd) epoxy bonding agent over the old concrete surface including the cost of all materials, rent of tools, scaffolding and cost of painting brushes etc complete all as specified and as directed by the Engr-in-Charge

Providing additional reinforcement bars in place of more than 1/3 corroded reinforcement bars incl the charges for cutting, bending, placing and fixing in position using Lok-Fix E-55(Manufactured by M/s Fosroc Chemicals India Ltd) including the cost of all materials rent of all accessories and tools, scaffolding and supporting materials, labour charges, welding new bar with old bars, including the cost of steel bars complete all as specified and as directed by the Engr-in-Charge

Supply and provisioning high strength Polymer Mortar Renderoc SP 40 (max 120 mm thick) (Manufactured by M/s Fosroc Chemicals India Ltd) to any thickness for beam and column. Fluid micro concrete shall be mixed with 6mm down coarse aggregate and specified quantity of water and mixed using a power operated slow speed stirrer and pouring inside the form work including the cost of all materials, rent for tools, scaffolding, and labour charges, water tight formwork etc. all as per manufacturer instructions complete all as specified and as directed by the Engr-in-Charge

Welding in repairs n. exc 2.5cm in length and thickness of metal to be welded exc 9mm but n.exc 20mm complete all as specified and as directed by the Engr-in-Charge

Welding in repairs exc 2.5cm but n.exc 5 cm in length and thickness of metal to be welded exc 9mm but n.exc 20mm complete all as specified and as directed by the Engr-in-Charge

Taking down carefully defective switch /socket /regulator/bell/bell push/holder/light fittings etc after disconnecting the electrical connections safely and keeping ready of any size/ make complete all as specified and as directed.

Supply and fix switch piano, flush type, single pole, one way, 6 Amps, complete all as specified and as directed by the Engr-in-Charge

Supply and fix switch piano, flush type, single pole, two way, 6 Amps,complete all as specified and as directed by the Engr-in-Charge

Supply and fix switch socket combination outlet multipurpose 2 in 1, 5 pin, 6 Amps and 2 pin 6 Amps flush type complete all as specified and as directed by the Engr-in-Charge

Supply and fix switch socket combination outlet multipurpose, 2 in 1, 3 pin, 6 Amps and 16 Amps flush type universal complete all as specified and as directed by the Engr-in-Charge

Supply and fix socket outlet multipurpose 2 in 1, 3 pin 6 Amps complete all as specified and as directed by the Engr-in-Charge

Supply and fix socket outlet multipurpose 2 in 1, 3 pin, 6 Amps and 16 Amps flush type complete all as specified and as directed by the Engr-in-Charge

Supply and fix switch piano, flush type, single pole, one way, 16 Amps,complete all as specified and as directed by the Engr-in-Charge

Supply and fix ceiling rose PVC poly carbonate, isolated body with two to three terminals including connection ISI marked complete all as specified and as directed by the Engr-in-Charge

Supply and fix lamp holder, PVC / Poly carbonate type with cord grip cap suitable for pendent/batten/angle fittings complete all as specified and as directed by the Engr-in-Charge

Supply and fix bell push, flush type, 5 Amps complete all as specified and as directed by the Engr-in-Charge

Supply and fix bell Ding Dong AC. 230 volts, single pole complete all as specified and as directed by the Engr-in-Charge

Supply and fix Modular switch 1 way 6A,1 module complete all as specified and as directed by the Engr-in-Charge

Supply and fix Modular switch 1 way 16A,1 module complete all as specified and as directed by the Engr-in-Charge

Supply and fix Modular Bell push 6A, 1 module complete all as specified and as directed by the Engr-in-Charge

Supply and fix modular Socket, 6A - 2/3 pin combined 2 module, complete all as specified and as directed by the Engr-in-Charge

Supply and fix modular Socket 6A/16A - 2/3 pin combined 2 module complete all as specified and as directed by the Engr-in-Charge

Supply and fix MCB SP 6 to 32 Amps, 240 Volt, having breaking capacity 10 kA, B curve with visual indication complete all as specified and as directed by the Engr-in-Charge

Supply and fix MCB SPN, 32 Amps, 240 Volt, having breaking capacity 10 kA, C curve complete all as specified and as directed by the Engr-in-Charge

Supply and fix MCB TPN, 40 to 100 Amps, 415 Volt, having breaking capacity 10 kA, B curve complete all as specified and as directed by the Engr-in-Charge

Supply and fix RCCB 25 Amps 30 MA sensitivity short circuit current rating 6 KA double pole complete all as specified and as directed by the Engr-in-Charge

Supply and fix surface mounted LED integrated batten four feet long, 22/20/18 Watt comprises of aluminium housing, integrated electronic driver, diffuser etc and all accessories pre-wired including connecting up completecomplete all as specified and as directed by the Engr-in-Charge.

Supply and fix surface mounted LED fitting 2 feet, 9/10 Watt comprises of aluminium housing, integrated electronic driver, diffuser etc and all accessories pre-wired including connecting up complete all as specified and as directed by the Engr-in-Charge

Supply and fix 2 pin type LED lamp B22 9/10 watts suitable for existing angle/batten holder comprises of high pressure die cast aluminium housing, polycarbonate cover, etc complete all as specified and as directed by the Engr-in-Charge

Supply and fix decorative wall light fixture made up of polycarbonate 9 Watts comprises of polycarbonate housing, high efficiency diffuser polycarbonate cover, lamp 9 Watts warm white, etc and all accessories pre-wired including connecting up complete all as specified and as directed by the Engr-in-Charge

Supply and fix of LED building security light fitting 25 watts protection comprises of a pressure die cast aluminium housing, polycarbonate cover, high power LED with lenses, 10KV built-in-surge protection, electronic driver, etc and all accessories pre-wired including connecting up with PVC insulated copper conductor cable 1.5 Sqmm, 3 core as required for connections and 32 mm bore light grade G I tube mounting bracket of 1.5 metre in length, bend to shape at 140 degree in ‘L’ shape and fixed to wall by means flat iron clamps, nuts, bolts and washers etc complete all as specified and as directed by the Engr-in-Charge.

M&L for cable with copper conductor PVC round sheathed (flexible) industrial cable of 1.5 Sqmm size with 20 mm PVC conduit including taking down of existing unserviceable item complete all as specified and as directed by the Engr-in-Charge

Supply and fixing in repairs 3mm thick hylum sheet, cut to suitable size, cutting holes for fixing switches, regulators, sockets etc complete all as specified and as directed by the Engr-in-Charge

S&F MCB DB double door made of sheet steel phosphates, powder painted with bus bar, neutral link, earth bar and rail double door type TPN 415 volts 4 way fixed concealed /recessed having IP-43 protection including cement mortar 1:3 for making good to distrubed surface match with existing surface including colouring complete all as specified and as directed by the Engr-in-Charge

All as per srl item No 211 here-in-before but for TPN 8 way complete all as specified and as directed by the Engr-in-Charge

All as per srl item No 211 here-in-before but for TPN 12 way complete all as specified and as directed by the Engr-in-Charge

All as per srl item No 211 here-in-before but for 240 Volts SPN 8 way complete all as specified and as directed by the Engr-in-Charge

All as per srl item No 211 here-in-before but for 240 Volts SPN 12 way complete all as specified and as directed by the Engr-in-Charge

All as per srl item No 211 here-in-before but for 240 Volts SPN 4 way complete all as specified and as directed by the Engr-in-Charge

Supply and fixing in repairs sheet metal enclosure with two pin and earth plug and socket complete with one MCB 20 Amps single pole having breaking capacity 10 kA complete all as specified and as directed by the Engr-in-Charge

M&L for earthing complete with galvanised steel earth plate electrode 600 x 600 x 6mm thick, burried directly in ground (earth pit not less than 2.25 mtrs below ground level) with top edge of the plate not less than 1.5 mtr normal ground level, connected to GI strip 32x6mm size as earth lead by means of bolts, nuts , check nuts and washers of GI or steel as shown in electrical plate No 3 connected to earthing test point, testing, (Earthing shall be interconnected) including necessary excavation, 50mm thick RCC 1:2:4 cover reinforced with 8mm TMT bars 100 mm c/c in both ways at , salt, charcoal, removal of surplus soil etc including taking out old earth plate complete all as specified and as directed by the Engr-in-Charge

M&L for pouring of salted water in to each earth pit through water pipe, minimum of 100 Ltrs dissolved with 5 Kgs of common salt to each earth pits / electrodes at various sub staions / buildings for improving the earth conditions complete all as specified and as directed by the Engr-in-Charge Note :- . The contractor has to arrange water and transport to various sub stations / installations for the above purpose and Testing of Earth resistance of Electrical earthings of various types , at various Buildings / sub stations by using digital type Electrical earth Tester instruments, registering the test results in the prescribed proforma including cleaning the earth chamber, identifying the earth lead wire, testing and writing by paint the test reults, date of testing etc. on the chambers all as specified and as directed . The job/test will be carried out in the presence of department staff and deatils registered all as specified and as directed.

Taking down copper/aluminium point wiring (light, fan, socket etc) complete, incl fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fittings, lamp holder etc,refixing removed fittings and making good the disturbed surface of wall to match with existing surface complete all as specified and as directed by the Engr-in-Charge

Taking down carefully copper/aluminium submain wiring of any size from surface/concealed /existing conduit of any height and removing materials at site and making good disturbed surfaces of walls, floors, roofs etc complete all as specified and directed by Engr-in-Charge.

Taking down unserviceable DB of any size complete all as specified and directed.

M & L for point wiring in and including rigid non metallic PVC conduit medium grade ISI marked of suitable dia, with 1.5 Sqmm PVC insulated unsheathed stranded copper conductor cable, single core, 1100 volts grade as per IS colour code, with pressed steel terminal boxes of suitable sizes and 1.6mm thick duly painted inner and outside for mounting switches, sockets, fan regulator etc with 3mm thick plastic laminated sheet cover with brass screw, cup washer and including PVC insulated and unsheathed stranded copper condutor of 1.5 Sqmm as continuous earth wire for one light point controlled by one switch complete all as specified and directed by Engr-in-Charge.

All as per srl item No 223 here-in-before but for one exhaust fan point controlled by one switch complete all as specified and directed by Engr-in-Charge.

All as per srl item No 223 here-in-before but for one fan point by one switch and regulator complete all as specified and directed by Engr-in-Charge.

All as per srl item No 223 here-in-before but for one 5 Amps socket outlet point on same board alongwith other switch complete all as specified and directed by Engr-in-Charge.

All as per srl item No 223 here-in-before but for one 5 Amps socket outlet point on independent board controlled by one switch complete all as specified and directed by Engr-in-Charge.

M & L for point wiring in and including rigid casing and caping, ISI marked of suitable dia, with 1.5 Sqmm PVC insulated unsheathed stranded copper conductor cable, single core, 1100 volts grade as per IS colour code, with pressed steel terminal boxes of suitable sizes and 1.6mm thick duly painted inner and outside for mounting switches, sockets, fan regulator etc with 3mm thick plastic laminated sheet cover with brass screw, cup washer and including PVC insulated and unsheathed stranded copper condutor of 1.5 Sqmm as continuous earth wire for one light point controlled by one switch complete all as specified and directed by Engr-in-Charge.

All as per srl item No 228 here-in-before but for one exhaust fan point controlled by one switch complete all as specified and directed by Engr-in-Charge.

All as per srl item No 228 here-in-before but for one fan point by one switch and regulator complete all as specified and directed by Engr-in-Charge.

All as per srl item No 228 here-in-before but for one 5 Amps socket outlet point on same board alongwith other switch complete all as specified and directed by Engr-in-Charge.

All as per srl item No 228 here-in-before but for one 5 Amps socket outlet point on independent board controlled by one switch complete all as specified and directed by Engr-in-Charge.

M & L for point wiring non metallic PVC conduit medium grade ISI marked of suitable dia, with 2.5 Sqmm PVC insulated unsheathed stranded copper conductor cable, single core, 1100 volts grade as per IS colour code, with pressed steel terminal boxes of suitable sizes and 1.6mm thick duly painted inner and outside for mounting switches, sockets, fan regulator etc with 3mm thick plastic laminated sheet cover with brass screw, cup washer and including PVC insulated and unsheathed stranded copper condutor of 2.5 Sqmm as continuous earth wire complete all as specified and directed by Engr-in-Charge.

M & L for point wiring casing and caping, ISI marked of suitable dia, with 2.5 Sqmm PVC insulated unsheathed stranded copper conductor cable, single core, 1100 volts grade as per IS colour code, with pressed steel terminal boxes of suitable sizes & 1.6mm thick duly painted inner & outside for mounting switches, sockets, fan regulator etc with 3mm thick plastic laminated sheet cover with brass screw , cup washer & including PVC insulated & unsheathed stranded copper condutor of 2.5 Sqmm as continuous earth wire complete all as specified and directed by Engr-in-Charge.

M & L for point wiring in existing PVC conduit medium grade/casing and caping of concealed/open, ISI marked of suitable dia, with 1.5 Sqmm PVC insulated unsheathed stranded copper conductor cable, single core, 1100 volts grade as per IS colour code, with pressed steel terminal boxes of suitable sizes & 1.6mm thick duly painted inner & outside for mounting switches, sockets, fan regulator etc with 3mm thick plastic laminated sheet cover with brass screw, cup washer & including PVC insulated & unsheathed stranded copper condutor of 1.5 Sqmm as continuous earth wire for one light point controlled by one switch complete all as specified and directed by Engr-in-Charge.

All as per srl item No 235 here-in-before but for one exhaust fan point controlled by one switch complete all as specified and directed by Engr-in-Charge.

All as per srl item No 235 here-in-before but for one fan point controlled by one switch and regulator complete all as specified and directed by Engr-in-Charge.

All as per srl item No 235 here-in-before but for one 5 Amps socket outlet point on same board alongwith other switch complete all as specified and directed by Engr-in-Charge.

All as per srl item No 235 here-in-before but for one 5 Amps socket outlet point on independent board controlled by one switch complete all as specified and directed by Engr-in-Charge.

M & L for point wiring in existing PVC conduit medium grade/casing and caping of concealed/open, ISI marked of suitable dia, with 2.5 Sqmm PVC insulated unsheathed stranded copper conductor cable, single core, 1100 volts grade as per IS colour code, with pressed steel terminal boxes of suitable sizes & 1.6mm thick duly painted inner & outside for mounting switches, sockets, fan regulator etc with 3mm thick plastic laminated sheet cover with brass screw , cup washer & including PVC insulated & unsheathed stranded copper condutor of 2.5 Sqmm as continuous earth wire complete all as specified and directed by Engr-in-Charge.

M&L for sub main wiring with 2 runs of 2.5 sqmm PVC insulated unsheathed 1100 volt grade multistranded copper conductor including PVC conduit and provision of one run 2.5 sqmm PVC insulated unsheathed single core copper conductor as earth continuity , connected to earth dolly inclusive of all accessories complete all as specified and directed by Engr-in-Charge. Note : 3 runs of 2.5 sqmm copper conductor and one run of PVC conduit shall be measured as one unit length.

M&L for sub main wiring with 2 runs of 2.5 sqmm PVC insulated unsheathed 1100 volt grade multistranded copper conductor casing & caping of suitable size and provision of one run 2.5 sqmm PVC insulated unsheathed single core copper conductor as earth continuity , connected to earth dolly inclusive of all accessories complete all as specified and directed by Engr-in-Charge. Note : 3 runs of 2.5 sqmm copper conductor and one run of casing and caping shall be measured as one unit length.

M&L sub main wiring with 2 runs of 4 sqmm PVC insulated unsheathed 1100 volt grade multistranded copper conductor including PVC conduit and provision of one run 4 sqmm PVC insulated unsheathed single core copper conductor as earth continuity connected to earth dolly inclusive of all accessories complete all as specified. Note : 3 runs of 4 sqmm copper conductor and one run of PVC conduit shall be measured as one unit length.

M&L sub main wiring with 2 runs of 4 sqmm PVC insulated unsheathed 1100 volt grade multistranded copper conductor casing & caping of suitable size and provision of one run 4 sqmm PVC insulated unsheathed single core copper conductor as earth continuity , connected to earth dolly inclusive of all accessories complete all as specified. Note : 3 runs of 4 sqmm copper conductor and one run of casing and caping shall be measured as one unit length.

M&L sub main wiring with 2 runs of 2.5 sqmm PVC insulated unsheathed 1100 volt grade multistranded copper conductor in existing PVC conduit /casing and caping of suitable size and provision of one run 2.5 sqmm PVC insulated unsheathed single core copper conductor as earth continuity , connected to earth dolly inclusive of all accessories complete all as specified and directed by Engr-in-Charge. Note : 3 runs of 2.5 sqmm copper conductor shall be measured as one unit length.

M&L sub main wiring with 2 runs of 4 sqmm PVC insulated unsheathed 1100 volt grade multistranded copper conductor in existing PVC conduit /casing and caping of suitable size and provision of one run 4 sqmm PVC insulated unsheathed single core copper conductor as earth continuity , connected to earth dolly inclusive of all accessories complete all as specified and directed by Engr-in-Charge. Note : 3 runs of 4 sqmm copper conductor shall be measured as one unit length. Note for Item Nos 241 to 246 : Wiring shall be carrired out in multi store building upto 12 th floor and rate for transporation of materials and tools are deemed to be included in the quoted rate

Supply and laying or fixing or passing through pipe or cable duct from meter room to the various floors of multistorey building, upto eight floor/10th floor, 1100 volt grade heavy duty cable with XLPE insulated aluminium conductor with an inner sheathing of PVC tape armoured with galvanaized steel or tape and over all PVC sheathed 16 sqmm 4 core wire including taking up/down old cable complete all as specified and directed by Engr-in-Charge.

Supply and fix Junction Box, Sheet Moulding Compound ( SMC) type, with hinged type door, weather proof , dust and vermin proof , locking arrangement off white colour of size 240X130X 95 mm (internal) , bakelite 4 way connector suitable holes drilled and mounted on insulator supports for cables terminals in and out and MCB SP 6 Amps for light control - 1No. complete Junction box fixed on pole / wall/ground etc., with suitable size clamps, bolts, nuts all including taking down of existing unserviceable item complete all as specified and directed by Engr-in-Charge. Note: All incoming / outgoing cable shall be connected with suitable size of lugs

Taking down Geyser of any capacity/type from existing position for repair /cleaning/ descaling of inner tank with descaling solution/wire brush, sand paper and refixing the same after repair complete all as specified and as directed. Note : Spares will be measured and paid separately under relevant items.

Supply and fix Heating Element 1.5 KW, 230 volts rating suitable for Geysers incl taking down old unserviceable Heating element complete all as specified and as directed.

Supply and fix Heating Element 2 KW, 230 volts rating suitable for Geysers incl taking down old unserviceable Heating element complete all as specified and as directed.

Supply and fix indicating lamp rounded type, 230 volts rating suitable for Geysers incl taking down old unserviceable indicator lamp complete all as specified and as directed.

Supply and fix pressure release valve dead weight type suitable for Geysers incl taking down old unserviceable pressure release valve complete all as specified and as directed.

Supply and fix thermostate switch with thermal setting 40˚ C to 90˚ C and relay 230 volts suitable for Geysers incl taking down old unserviceable thermostate complete all as specified and as directed.

M&L for taking out unserviceable water tank (inner shell) of water heater of any capacity and brazing to leaking portion or patching work as required with using copper plate 1.5mm thick including shaping to original size complete all as specified and and as directed. Note : Unserviceable geysers to be deposited to E/M store yard.

M&L for wall fastners of size 100 mm long 8mm dia with double washers incl grouting and make good the wall surface with cement mortar (1:4) for fixing water heater after removing the existing unserviceable nuts,bolts and washers complete all as specified and as directed.

Supply and fix plug top 3 pin 16 Amps ISI marked incl taking down old unserviceable plug top complete all as specified and as directed.

Supply and fix in 3 core 2.5 sqmm round copper flexible conductor incl taking down old unserviceable wire complete all as specified and as directed.

Disconnection of electrical wire from ceiling fan any type / size and make from existing position, and reassembling the repaired ceiling fan and testing to the entire satisfication of engineer in charge and hanging at same place with nut , bolts washers etc, connection with flexible wire and testing complete all as specified and directed by Engr-in-Charge. NOTE:- Replacement of Spares flexible wire etc/rewinding of ceiling fan/shall be measured and paid seperately under respective item for material and labour cost .

Material and labour for rewinding of ceiling fan 1200/1400 MM sweep by dismantling of fan motor, cutting and removing of burnt windings, cleaning the motor slots, rewinding the motor with supper enameled copper wire of appropriate gauge, provision of insulation paper, applying of varnish, heating / baking the motor to acheive the proper insulation resistance cleaning and removing of old lubricating substance from bearing/bush using Kerosine oil, painting, carrying out fresh lubrication using grease and to make free for smooth functioning complete all as specified and directed by Engr-in-Charge.

Material and labour for carrying out re metalling in worn out shaft, cutting and polishing to make the shaft suitable for fixing of new ball bearing and fixing ball bearing in replacement of bushing system in ceiling fan and assembling the same and testing to entire satifaction of Engineer in change Note : Bearing shall be measured and paid seperately.

Supply only ball bearing of any size and type, suitable for any type/make/size of ceiling fan complete all as specified and directed by Engr-in-Charge. Make - TATA/NBC/SKF or equivalent as approved by GE.

Supply and fixing capacitor of capacity 2.5 MFD, 220 volt ISI marked complete all as specified and directed by Engr-in-Charge.

Supply and fixing PVC insulated, unsheathed multistranded twin twisted copper flexible cable of size 1.5 Sqmm complete all as specified and directed by Engr-in-Charge.

Supply only suitable size of bush for ceiling fan of any type/size complete all as specified and directed by Engr-in-Charge. Make - TATA/NBC/SKF or equivalent as approved by GE.

Supply and fixing of PVC connector 4 way 6 Amps with connection screws, nuts. etc complete all as specified and directed by Engr-in-Charge.

Supply and fixing PVC clamps with fixing screws for holding capacitor of any type and size complete all as specified and directed by Engr-in-Charge.

Supply and fixing Alloy Steel Heavy Duty "S" or "D"-Hook Hanger with double Fasteners M10 x 75mm for Hanging Ceiling fan sted wornout hook complete all as specified and directed by Engr-in-Charge.

Supply and fixing in repair heavy duty Steel & rubber fan to ceiling hook attachment clamp with fan rod nut bolt & locking pins complete set complete all as specified and directed by Engr-in-Charge.

Supply and fixing ceiling fan blade of 1200/1400mm size of existing Make including proper painting matching with existing ceiling fan complete all as specified and directed by Engr-in-Charge.

Supply and fixing PVC canopy suitable for ceiling fan of any type/make for both end of down rod including fixing screws complete all as specified and directed by Engr-in-Charge.

Supply and fixing down rod 1'/1.5' suitable for ceiling fan of any type/make for both end of down rod including fixing screws complete all as specified and directed by Engr-in-Charge.

Cleaning of ceiling fan assembly of any type/size and carrying out two coat of spray painting with first quality synthetic enamelled paint of approved colour, including writing of MES number in black paint complete all as specified and directed by Engr-in-Charge.

Disconnection of electrical wire from exhaust fan of any sweep any type / size and make, dismantling the exhaust fan from existing position, and reassembling the repaired exhaust fan and testing to the entire satisfication of engineer in charge and hanging at position with nut, bolts washers etc, connection with point wiring and testing complete all as specified and directed by Engr-in-Charge. NOTE:- Replacement of Spares flexible wire etc/rewinding of exhaust fan/shall be measured and paid seperately under respective item for material and labour cost .

Supply and fixing electronic fan regulator stepped type flush type 120 W suitable for existing ceiling fans fixed on phenolic laminated sheet etc. as reqd complete all as specified and directed by Engr-in-Charge.

Material and labour for rewinding of exhaust fan of 300 mm sweep by dismantling of fan motor, cutting and removing of burnt windings, cleaning the motor slots, rewinding the motor with supper enameled copper wire of appropriate gauge, provision of insulation paper, applying of varnish, heating / baking the motor to acheive the proper insulation resistance cleaning and removing of old lubricating substance from bearing/bush using Kerosine oil, painting ,carrying out fresh lubrication using grease and to make free for smooth functioning complete all as specified and directed by Engr-in-Charge.

All as per srl item No 276 here-in-before but for 380mm sweep complete all as specified and directed by Engr-in-Charge.

All as per srl item No 276 here-in-before but for 450mm sweep complete all as specified and directed by Engr-in-Charge.

Supply and fixing of louver shutter made of MS sheet metal 1.2 mm thick for round/square base and 0.8 mm thick for flaps, comprising of mounting legs frames made of MS flat strips of size 25mmx3mm includidng heavy duty rust proof passivated bolts of size 50 mm long 8 mm dia to be fixed on wall fater driling, and duly painted by two coat of synthatic enamelled paint (spray painting) over a coat of primer for exhust fan up to 300/380/450 mm sweep complete all as specified and directed by Engr-in-Charge.

M&L for fan motor suitable for PVC body exhaust fan upto 250 mm sweep and RPM match with existing incl taking down old motor and fixing of new with proper allignment and refixing the same using necessary mounting screws and accessories without any vibrations and noise to the satisfaction of Engr-in-Charge.

Supply and fixing capacitor 230 volt AC 50 HZ 4.0 MFD, 220 volt ISI marked complete all as specified and directed by Engr-in-Charge.

Supply and fix PCB (Printed Circuit Board) for BLDC fan of any make/type and size (1200/1400) mm sweep as existing to obtain the specified and satisfactory RPM as per menufactures specification complete all as specified and directed by Engr-in-Charge. Note : Ceiling fan before fix at site the RPM shall be checked and match as per manufactures specification till entire satification of Engr in charge

Note:- (i) Complaints will be attended on sundays/holidays also. (ii) Minimum one electrician and one mate shall be detailed for one set of complaints, with all required tools in neat tool bag. (iii) The trademen shall wear uniforms with safety shoes incl all necessary safety gear. (iv) Complaints/job cards shall be collected from complaint cell and trade man should submit the feedback of complaints the in two day, if fails to attend the complaint in prescribed time, penality of Rs. 500 per complaint per day will be recovered.

M/s.Rejoy Constructions (BID ID -3167626)

ARANCO INFRASTRUCTURE (BID ID -3180009)