ARC for Civil Maintenance work for Execution of misc. maintenance work for all S/Dn and Divison premises of Kadodara Division for the year 2026-27

Name of work : ARC for Civil Maintenance work for Execution of misc.

maintenance work for all S/Dn and Divison premises of Kadodara Division for the year

Description Rate Unit

Excavation for foundation upto 1.5 m depth including

sorting out and stacking of useful materials and disposing

1 off the excavated stuff upto 50 Meter lead.(B) Dense or 269.87 CMT

Filling available excavated earth (excluding rock) in

trenches. plinth, sides of foundations etc. in layers not

2 exceeding 20 cm. in depth consolidating each disposited 135.56 CMT

layer by ramming and watering.

Filling in plinth with sand under floors including watering

3 ramming, consolidating and dressing complete. 477.03 CMT

Filling in foundation and plinth with murrum or selected soil

4 in layers of 20cm. thickness including watering, ramming 298.79 CMT

and consolidating etc. complete.

Filling in foundation and plinth with brick Bats Chhara in

5 layers of 20cm. thickness including watering, remming and 615.31 CMT

consolidating etc. complete.

Boring holes 3.5 m deep in ordinary soil (for cast in situ

piles) and getting out the soil and disposal of the surplus

excavated soil as directed within a lead of 50 Meter for

following diameter of pipes.(ii) 250 mm

Providing, laying, spreading and compacting graded stone

aggregate to wet mix macadam specification including

premixing the Material with water at OMC in mechanical mix

plant carriage of mixed Material by tipper to site, laying in

uniform layers with paver in sub- base / base course on well

prepared surface and compacting with vibratory roller to

achieve the desired density.

Cutting, pulling out and removing thick jungle grass,shrubs,

bushes and unwanted vegetations/pants from their roots

and up-rooting from the area of Khadi i.e. natura drain

channel or gutter filled-up with sewage water, earth,coal

and storm water including removing of silted stuff of mud,

sewage, earth etc. by digging or lifting out all materials by

engaging hydraulic excavator of one Cu.M.bucket and

dispose off all stuff and cut vegetations as directed by the

Engr.-in-charge. Also making sewage & storm water flow in

smooth flowing condition by preparing @ 3.0 mtr wide

channel for the smooth water flow as per the instruction of

the E.I.C. The rate includes all require dmachineries, tools &

tackles, materials, labours, loading & unloading,

transportation, equipments etc. complete at the risk and

cost of the contractor. Payment will be made for the actual

work done hours at site.

Tractor Trip (As per requirement)

Demolition & Dismantling

Demolition including stacking of serviceable materilas and

10 disposal of unserviceable materials with all lead and lift. (i) 1099.75 CMT

Demolition of Brick work and stone masonry including

stacking of serviceable materilas and disposal of

11 unserviceable materials with all lead and lift.(ii) In Cement 572.20 CMT

Dismentaling tiled of stone floors laid in mortar including

12 stacking of serviceable materilas and disposal of 50.12 SMT

unserviceable materials with all lead and lift.

Dismentaling of sheet roofing including ridges, Hips, Valleys,

Gutters etc. stacking of serviceable materilas and disposal of

unserviceable materials with all lead and lift.(i) G.I.sheet

Dismentaling of sheet roofing including ridges, Hips, Valleys,

Gutters etc. stacking of serviceable materilas and disposal of

14 unserviceable materials with all lead and lift.(ii) A.C. sheet 55.57 SMT

Dismentling doors, windows, ventilators etc. (wood or steel)

shutters including chowkhats architraves, holdfasts and

15 other attachment etc. complete and stacking them within all 195.14 Each

lead and lift.(i) Not exceeding 3 Sq.M. in area.

Dismentling doors, windows, ventilators etc. (wood or steel)

shutters including chowkhats architraves, holdfasts and

other attachment etc. complete and stacking them within all

lead and lift.(ii) Exceeding 3 Sq.M. in area.

Dismantling santtary fittings like wash basin . W.C. pan

17 Indian and European type, flushing tank etc. including 421.71 Each

stacking the materials with all lead and lift.

Dismentling C.I. pipes G.S.W.pipes abd A.C. rain water

18 pipes with fittings and clamps including stacking the 78.06 RMT

materials with all lead and lift ( for any dia, of pipe)

Scraping oil paint from steel and other metal surface and

19 making the surface even (with Hand Scraping.) 51.27 SMT

Providing and laying cement concrete 1:3:6 (1-Cement : 3-

coarse sand : 6- hand broken stone aggregates

mmnominal size) and curing complete excluding cost of

formwork in (A) Foundation and Plinth

Providing and laying cement concrete 1:2:4 (1-Cement : 2-

Coarse sand : 4- graded stone aggregates 20 mm nominal

size) and curing complete excluding cost of formwork in (A)

Foundation and Plinth

Providing and laying ordinary cement concrete 1:2:4 (1-

Cement 2- coarse sand : 4- graded stone aggregates

mm nominal size) exposed work with curing etc.complete

including the cost of formwork but excluding the cost of

reinforsement for R.C.C work in (iii) Slabs having more than

10cm and upto 13 cm. thickness

Providing and laying ordinary cement concrete 1:2:4 (1-

Cement 2- coarse sand : 4- graded stone aggregates

mm nominal size) and finishing smooth with,curing etc.

23 complete including the cost of formwork but excluding the 7589.70 CMT

cost of reinforcement for R.C.C work in (A) BEAMS

:(ii)Having cross-sectional area more than 0.08Sq.M and

Providing and laying ordinary cement concrete 1:2:4 (1-

Cement 2- coarse sand : 4- graded stone aggregates

mm nominal size) and finishing smooth with,curing etc.

24 complete including the cost of formwork but excluding the 10448.71 CMT

cost of reinforcement for R.C.C work in (B) COLUMNS:

(ii)Having cross-sectional area more than 0.08 Sq.M and

Providing TMT Bar FE 500D reinforcement for R.C.C. work

25 including bending, binding and placing in position complete 76.52 Kg

upto floor two level

Brick work using common burnt clay building bricks having

crushing strength not less than 35kg./Sq.Cm. in foundation

and plinth in Cement Mortar 1:6 (1- Cement : 6 -fine

sand)(A) Modular

Brick work using common burnt clay building bricks having

crushing strength not less than 35kg./Sq.Cm. in foundation

and plinth in Cement Mortar 1:6 (1- Cement : 6 -fine

sand)(C) Fly Ash Bricks

Extra for brick work in superstructure above plinth level

upto floor two level (A) Modular

Extra for brick work in superstructure above plinth level

upto floor two level(C) Fly Ash Bricks

(i) Half brick masonry in common brunt clay building bricks

having crushing strength not less than 35 Kg/Sq.Cm. in

30 Cement mortar 1:4 (1-Cement : 4 -coarse sand ) in 613.91 SMT

foundation and plinth (A) Modular

(i) Half brick masonry in common brunt clay building bricks

having crushing strength not less than 35 Kg/Sq.Cm. in

31 Cement mortar 1:4 (1-Cement : 4 -coarse sand ) in 650.31 SMT

foundation and plinth (C)Fly Ash Bricks

Extra for half brick masonry in superstructure above plinth

32 level upto floor two level. (A) Modular 50.59 SMT

Extra for half brick masonry in superstructure above plinth

level upto floor two level. (C)Fly Ash Bricks

Providing 10mm thick cement plaster in single coat on

brick/concrete walls for interior plastering upto floor two

34 level and finished even and smooth in (i)Cement mortar 1:3 134.13 SMT

(1-cement:3-sand)

Providing 15mm thick cement plaster in single coat on

Rough (Similar)side of single or half brick walls for interior

35 plastering upto floor two level and finished even and 178.61 SMT

smooth in (i) Cement mortar 1:3 (1-cement:3-sand)

Providing 20mm thick cement plaster in single coat on

single or half brick walls for interior plastering upto floor two

level and finished even and smooth in (i) Cement mortar 1:3

(1-cement:3-sand)

Extra over items 32 to 34 for finishing with a floating coat of

neat cement slurry

Extra over items 32 to 34 for plastering on ceilings and

38 sofits of stairs upto floor two level instead of plastering on 25.80 SMT

20mm thick sand faced cement plaster on walls upto height

10 metres above ground level consisting of 12mm thick

39 backing coat of C.M. 1:3 (1-cement : 3-sand) and 8mm 312.56 SMT

thick finishing coat of C.M. 1:1 (1-cement : 1-sand) etc.

Providing cement vata (10cm. x 10 cm. size) quarter round

40 in cement mortar 1:1 including neat cement finishing, 24.04 RMT

watering etc. complete.

Providing and laying Ceramic tiles 6mm thick in flooring

treads of steps and landing laid on a bed of 12mm thick

41 cement mortar 1:3 (1-cement : 3-coarse sand ) finishing 1007.23 SMT

with flush pointing in white cement.

Providing and laying Ceramic tiles 6mm thick in skrting

risers of steps and dedo on 10mm thick cement plaster 1:3

(1-cement : 3-coarse sand) and jointed with white cement

Providing and laying marble stone slab flooring over 20mm

(average)base of cement mortar 1:6 (1-cement : 6 coarse

sand) or L.M. 1:1.5(1- lime putty: 1.5 - coarse sand) laid

and jointed with gray cement slurry including rubbing and

polishing complete. (A) Marble slab 25mm thick

Providing and laying polished Kota stone slab flooring over

20mm (Average) thick base of cement mortar 1:6 (1-

cement : 6-coarse sand) or L.M. 1.1.5 (1-Lime putty :1.5 -

44 coarse sand) laid over and jointed with grey cement slurry 1005.48 SMT

mixed with pigment to match the shade of slab including

rubbing and polishing etc. complete. (A) 25mm

Providing and laying polished kota stone slab 25mm thick in

risers of steps,skirting Dedo and pillars laid on 10mm thick

cement mortar 1:3 (1-Cement : 3 coarse sand) and jointed

45 with gray cement slury mixed with pigment to match the 1132.82 SMT

shade of slab including rubbing and polishing etc. complete.

Providing & Laying Grenite slab 18 mm thick in skirting,

dedo, risers of steps and landing, sill laid on bed of 10mm

46 thick base of CM 1:4 finished with flush pointing in white or 3261.00 SMT

colour cement as directed by EIC

47 Labour Charges half round edge for Granite 85.00 RMT

48 Labour Charges edge finished for Granite 43.00 RMT

P & L 24" x 24" vitrified 8 mm thick tile flooring over 20 mm

(average) base of cement mortar 1:6 (1 cement: 6 coarse

sand) on new surface or fixing on existing flooring by

49 adhesive material including dismentaling of existing flooring 1453.19 SMT

and jointed with color cement slurry including finised with

flush pointing & cleaning the surface etc. complete for

Providing and laying cement concrete flooring 1:2:4 (1-

cement : 2-coarse sand : 4-graded stone aggregate 20mm

50 nominal size) laid in one layer and finished with a floating 335.72 SMT

coat of neat cement. (B) 50mm thick.

Providing and fixing pre-cast concrete kerb stone of gray

cement based concrete block 30cm length,30cm height and

15cm thick of M250 grade concret as per approved design

and including excavation for fixing in proper line and

level,filling the joint with C:M 1:3 (1cement:3fine sand) etc

Providing and fixing pre-cast Rubber Dye / steel Dye inter

locking concrete block 60mm thick with grade of concrete

M300 pnumatic compressed /vibrated mechanically and as

52 per approved design Confirming to IS 15658 : 2006 699.93 SMT

including 35 mm Sand layer for levelling and filling the joint

with sand in proper line and level as per guidlines of IRC:

SP 63-2018 etc. Complete.

53 Labour Charge for removing existing block and Refix. 322.81 SMT

Providing and laying broken chine mosaic flooring using

brick bats 25 to 100mm size with 50 % of C.M. 1:4 (

cement : 5 coarse sand ) admixed with water proofing

compound for terrace using 12 mm to 20 mm broken pieces

54 of glazed tiles to be laid over cement mortar 1:3 to plain or 1329.30 SMT

slope and to be tempered to bring mortar creme out upto

surface using white cement including rounding off junctions

and extending them upto 15 cm along the wall,clearing with

water and oxalic acid etc. as directed.

Providing composite water proofing treatment to floor and

walls of water tank, w.c.bath area, through approved

agencies preparing floor and wall for water proofing work/

by chasing/cutting as per the companies requirement. First

by providing and applying cementitious crystalline based

55 waterproofing for concrete rafts, walls, water tanks, slabs, 752.00 SMT

concrete floors etc. with Krystol T2 or equivalent system.

Cementitious based dry Krystol T2 Crystalline powder

capable of creating Crystals to seal the pores, intercises

and micro cracks in the concrete.

Providing wood work in frames of false- ceiling, partitions

56 etc sawn and put up in position. (A) Indian Teak Wood 658.74 Cu.Dm.

Providing and fixing M.S. grills of required pattern to

wooden frames of windows etc. with M.S. flats at required

57 spacings and frame alround, square or round bars with 108.16 Kg

round headed bolts and nuts or by screws (A) Plain Grill.

Providing and fixing 35 mm thick shutters for Doors,

windows and clerestory windows including Indian teak wood

frames 10 cm x 7 cm. size including anodized alluminium

58 fixtures and fastenings including primer coat of approved 4595.06 SMT

quality and two coats of oil painting etc, complete. (i) Fully

Providing and fixing 35 mm thick shutters for Doors,

windows and clerestory windows including Indian teak wood

frames 10 cm x 7 cm. size including anodized alluminium

fixtures and fastenings including primer coat of approved

quality and two coats of oil painting etc, complete. (ii) Fully

Providing and fixing 35 mm thick shutters for Doors,

windows and clerestory windows including Indian teak wood

frames 10 cm x 7 cm. size including anodized alluminium

60 fixtures and fastenings including primer coat of approved 4940.25 SMT

quality and two coats of oil painting etc, complete. (iii)

Partly panelled and partly glazed.

Providing and fixing FRP frame size 125x65 mm and 35mm

thick FRP shutter with wood grain raised panneled design

finish shutter having extra reinforcement on sides & edges

in Gel coat finish. The core of the shutter & frame is to be

filed up with injected polyurethene foam done in situ

61 alongwith embedded wooden pieces for stiffening & also 1999.98 SMT

taking hinges & fintures. The whole FRP frame & shutter is

to be water proof weather proof, termite proof & resistance

to mild acid/alkali. Rates are to be inclusive of S.S hinges

with fastener sleeve & alluminium fixtures & fastenings.

(i) Providing and fixing glazed louvered glass windows and

ventilators with teak wood frame 10cm. x 7cm. size

including 3 coats of oil painting to wood work etc.complete.

Providing corrugated G.I. sheet of class-3 roofing fixed with

glavanished iron J or L Hooks, Bolts and nuts 8mm diameter

with bitumen and G.I. limpet washer or G.I. limpet washer.

filled with white lead complete excluding the cost of purlins,

Rafters and Trusses.(1) 0.80 mm thick sheet.

Providing ridges or hips 600 mm overall in plain G.I. sheet

class-3 fixed with G.I.J. or L Hooks and nuts 8mm dia G.I.

64 Limpet and bitumen washer complete. (1) 0.80 mm thick 658.12 SMT

Providing valleys 900mm overall in plain 1.6mm thick G.I.

sheet fixed with G.I. J or L Hooks, Bolts and nuts glavanised

iron J or L Hooks Bolts and nuts 8mm dia G.I. Limpet and

bitumen washers complete.

Providing and Fixing 6 mm thick Lexan Polycarbonate multi

wall roofing sheet fixed with hilti screw and rubber silicon

sealer and alluminium strip of size 50 x 3 mm etc complete

as directed by Engineer in charge.

Structural steel work ( Confirming to IS 4923-1997) riveted,

bolted or welded in builtup for all type sections, in framed

work, including cutting, hoisting, fixing in position and

67 applying a priming coat of approved steel primer all 130.52 Kg

complete as per the structural designs and directions of

Engineer in charge.Column ( 122 x 61 x 3.6mm )

Water Supply Plumbing & Sanitary Fitting

Providing and fixing to wall ceiling and floor 10.0Kg. F/Cm2

working pressure poluthene pipes of the following outside

68 Dia. Low densidy, complete with special falnge compression 190.12 RMT

type fittings, wall clipsetc. including making good the wall

ceiling and floor.(E) 50mm

Providing and fixing to wall ceiling and floor 10.0Kg. F/Cm2

working pressure polythene pipes of the following outside

69 Dia. Low densidy, complete with special falnge compression 277.46 RMT

type fittings, wall clipsetc. including making good the wall

ceiling and floor.(F) 75mm

Providing and fixing to wall ceiling and floor 10.0Kg. F/Cm2

working pressure poluthene pipes of the following outside

70 Dia. Low densidy, complete with special falnge compression 335.69 RMT

type fittings, wall clipsetc. including making good the wall

ceiling and floor.(G)110 mm

Providing and fixing to wall ceiling and floor 10.0 Kg. F/Cm2

working pressure poluthene pipes of the following outside

71 Dia. Low densidy, complete with special falnge compression 510.17 RMT

type fittings, wall clipsetc. including making good the wall

ceiling and floor.160 mm

PVC 4kg 90 mm dia rain water pipe

Providing and fixing in position cowel went to pipes.(B)

Providing and fixing in position cowel went to pipes.(C)

Providing and fixing water closet squatting Pan (Indian type

W.C. Pan) size 580mm (Earthwork, bed concrete, foot reste

75 and trap to be measured and paid for separately) (A) 979.02 Each

Vitreous China.(I) Long pattern = White colour

Providing and fixing wsh down water closet (European type,

W.C. Pan) with integral P or S trap including jointing the

trap with soil pipe in Cement Mortar 1:1 (1-Cement : 1-fine

sand) (Seal and cover to be measured and paid for

separately)(A)vitreous China Pattern :(i) in white colour

Providing and fixing 100mm size P or S trap for water closet

squatting pan including jointing the trap with the pan and

soil pipe in cement Mortar 1:1 (1-Cement : 1-Fine sand)(A)

Vitreous China.

Providing and fixing 12.5 Litres low level flushing cistern

with a pair, of C.I. or Mild brackets, complete with fittings

such as lead valve less syphon, 15mm nom.nal size brass

ball valve with polythene float, C.P brass handle unions and

couplings for connections, with inlet, outlet and overflow

78 pipes, 40mm dia. porcelain enamelled flush bend including 2346.92 Each

cutting holes in walls and making good the same connecting

the flush bend with cistern and closet (overflow pipe to be

measured and paid for separately)(A) Vitreous China (I) In

Providing and fixing plastic seat and cover for wash down

79 water closer with C.P. brass hinges and rubber buffers. (B) 288.45 Each

Black plastic seal and cover.

Providing and fixing washbasin with single hole for pillar tap

with C.I. or M.S. brackets painted white including sutting

80 holes and making good the same but excluding fittings.(A) 1567.76 Each

Vitreous China:(ii) Flat Back washbasin 550 mm x v 400mm

size. (i) In white colour.

Providing and fixing Kitchen sink with C.I. or M.S. brackets,

painted white including cutting holes in walls and making

good the same but excluding fittings. (C) Vitreous China

Sink.(i) 600mm x450mm x 150mm size

Providing and fixing C.P. brass waste for washbasin or sink.

Providing and fixing C.P. brass waste for washbasin or sink.

Providing and fixing 600mm x 450mm bevelled edge mirrror

of superior glass mounted on 6mm thick A.C. sheet or

plywood sheet and fixing to wooden pluge with C.P. brass

screws and washers.

Providing and fixing screw down bib taps of following

85 size.(B) Brass chromium plated screws down Bib Tap. (i) 184.98 Each

Providing and fixing screw down bib taps of following

86 size.(B) Brass chromium plated screws down Bib Tap. (ii) 212.68 Each

Providing and fixing pillar tap, capstan head, screw down

87 high pressure with screws, shanks and back nuts. (i) 15mm 305.67 Each

Providing and fixing pillar tap, capstan head, screw down

88 high pressure with screws, shanks and back nuts. (ii) 20mm 351.18 Each

Providing and fixing brass screw down stop tap.(A) 15mm

Providing and fixing brass screw down stop tap.(B) 20mm

Providing and fixing brass screw down stop tap.(C) 25mm

Providing and fixing Gun metal check or nonreturn fullway

92 wheel valve.(A) 15mm dia. 184.98 Each

Providing and fixing Gun metal check or nonreturn fullway

93 wheel valve.(B) 20mm dia. 201.8 Each

Providing and fixing Gun metal check or nonreturn fullway

94 wheel valve.(C) 25mm dia. 416.47 Each

Providing and fixing Gun metal check or nonreturn fullway

95 wheel valve.(D) 32mm dia. 311.61 Each

Providing and fixing Gun metal check or nonreturn fullway

96 wheel valve.(E) 40mm dia. 656.86 Each

Providing and fixing chromium plated brass half trun flush

97 cock of approved quality including fixing in pipe line etc. 252.26 Each

complete.(i) 20mm dia.

Providing and fixing chromium plated brass half trun flush

98 cock of approved quality including fixing in pipe line etc. 261.16 Each

complete.(ii) 25mm dia.

Providing and fixing chromium plated brass half trun flush

99 cock of approved quality including fixing in pipe line etc. 273.03 Each

complete.(iii) 32mm dia.

Angle Cock with PVC pipe connection upto WHB

Hose pipe for pillar cock

Wall mounted SS sink tap

Providing and fixing jet spray/hand faucet of W.C. with all

103 necessary fittings as per instruction of EIC 950.00 Each

Concealed cock 15 mm Heavy duty with cap

Providing and fixing C.P. brass towel rail comlete with C.P.

105 brass brackets fixed to wooden plugs with C.P. brass 610.32 Each

scews.(B) 600mm x 20mm size.

Providing and fixing Toilet paper holder (A) C.P brass

Providing and fixing PTMT soap dish holder having length

107 of 138mm, breadth 102mm, height of 75mm with concealed 160.00 Each

fitting arrangements.

Waste Pipe for Wash basin C.P. 40mm dia

Providing and fixing Urinal of approved quality including

connection with trap and with integral longitudinal flush

pipe.(A) Squating plate pattern white earthenware 550mm x

Providing and fixing ball cock of approved. Quality as

110 directed.(A) Copper Metal (i) 25mm dia. 131.57 Each

Providing and fixing ball cock of approved. Quality as

111 directed.(A) Copper Metal (ii) 50mm dia. 187.96 Each

Providing and fixing C.I. Manhole cover 0.60 M. x0.45M.

112 size having weight not less than 35Kg. 948.68 Each

Providing and fixing G.I. Rain water spout of 50mm dia. and

Providing and fixing concealed center point to wall ceiling &

floor CPVC (SDR 13.5) PIPE having National Sanitation

114 Foundation (NSF) seal for potable water of following dia. 168.67 RMT

nominal bore tube fittings and clamps including making

good the wall, ceiling and floor etc. complete.[A] 15 mm.

Providing and fixing concealed center point to wall ceiling &

floor CPVC (SDR 13.5) PIPE having National Sanitation

Foundation (NSF) seal for potable water of following dia.

nominal bore tube fittings and clamps including making

good the wall, ceiling and floor etc. complete. [B] 20 mm.

Providing and fixing concealed center point to wall ceiling &

floor CPVC (SDR 13.5) PIPE having National Sanitation

Foundation (NSF) seal for potable water of following dia.

nominal bore tube fittings and clamps including making

good the wall, ceiling and floor etc. complete. [C] 25 mm.

Providing laying and jointing in true line and level 15mm

dia. U.P.V.C. Pipe ( SCH- 40) for cold water including fittings

as approved by Engineer In Charge. Pipe shall be fixed on

the wall with the help of clamp at every two metre C/C or

shall be concealed as directed including necessary fittings

etc. including testing of pipe and joints and fixing the same

with adhesive solvent, including cost of all materials.

Providing laying and jointing in true line and level 25mm

dia. U.P.V.C. Pipe ( SCH- 40) for cold water including fittings

as approved by Engineer In Charge. Pipe shall be fixed on

118 the wall with the help of clamp at every two metre C/C or 90.93 RMT

shall be concealed as directed including necessary fittings

etc. including testing of pipe and joints and fixing the same

with adhesive solvent, including cost of all materials.

Providing laying and jointing in true line and level 32mm

dia. U.P.V.C. Pipe ( SCH- 40) for cold water including fittings

as approved by Engineer In Charge. Pipe shall be fixed on

119 the wall with the help of clamp at every two metre C/C or 117.97 RMT

shall be concealed as directed including necessary fittings

etc. including testing of pipe and joints and fixing the same

with adhesive solvent, including cost of all materials.

Providing laying and jointing in true line and level 40mm

dia. U.P.V.C. Pipe ( SCH- 40) for cold water including fittings

as approved by Engineer In Charge. Pipe shall be fixed on

120 the wall with the help of clamp at every two metre C/C or 146.65 RMT

shall be concealed as directed including necessary fittings

etc. including testing of pipe and joints and fixing the same

with adhesive solvent, including cost of all materials.

Providing laying and jointing in true line and level 50mm

dia. U.P.V.C. Pipe ( SCH- 40) for cold water including fittings

as approved by Engineer In Charge. Pipe shall be fixed on

121 the wall with the help of clamp at every two metre C/C or 193.73 RMT

shall be concealed as directed including necessary fittings

etc. including testing of pipe and joints and fixing the same

with adhesive solvent, including cost of all materials.

Providing and fixing PVC SWR Nahni trap IS 14735 for drain

- 100 mm diameter with jali of the following nominal

122 diameter of self cleansing design with C.I scread down or 593.7 Each

hinged grating including the cost of cutting and making

good the walls.

Providing and fixing PVC SWR Nahni trap IS 14735 for drain

- 75 mm diameter with jali of the following nominal

123 diameter of self cleansing design with C.I scread down or 580.47 Each

hinged grating including the cost of cutting and making

good the walls.

Providing and fixing S.W. gully trap with C.I. grating brick

masonry chamber and water tight C.I. cover with frame of

124 300mm x 300mm size (inside) with standard weight.(i) 1234.57 Each

Square mouth traps.(B) 150mm x 100mm size P or R type

Providing and fixing S.W. gully trap with C.I. grating brick

masonry chamber and water tight C.I. cover with frame of

125 300mm x 300mm size (inside) with standard weight.(i) 1279.40 Each

Square mouth traps. (A) 100mm x 100mm size P type.

Drainage & Sewerage Item

Providing laying (to level or slopes) and jointing reinforced

concrete Light duty non-pressure pipes I.S. class NP2 of the

126 following internal diameter with collars and butt ends 356.28 RMT

prepared for collar joints including testing of joints

complete.(C) 250mm

Providing laying (to level or slopes) and jointing reinforced

concrete Light duty non-pressure pipes I.S. class NP2 of the

127 following internal diameter with collars and butt ends 671.31 RMT

prepared for collar joints including testing of joints

complete.(D) 300mm

Providing laying (to level or slopes) and jointing reinforced

concrete Light duty non-pressure pipes I.S. class NP2 of the

128 following internal diameter with collars and butt ends 1066.49 RMT

prepared for collar joints including testing of joints

complete.(E) 450mm

Constructing brick masonry chamber for underground C.I.

Inspection chamber and bends with bricks having crushing

strength not less than 35Kg/Cm2 in C.M. 1:5 C.I. cover with

frame (Light duty) 455mm x 610mm intenal dimensions

total weight of cover with frame to be not less than 38Kg.

(Wt. of cover 23 Kg.) and Wt. of frame 15Kg.) (R.C.C. top

129 slabe with 1:2:4 mix (1-cement :2-coarse sand :4-graded 2903.89 Each

stone aggregate 20mm size) foundation concrete 1:5:10

inside plaster 15mm thick with cement mortar 1:3 finished

smooth with a floating coat of neat cement on walls and

bed concrete etc. complete.(i) Inside dimensions 455mmx

610mm and 450mm deep for single pipe line.

Constructing brick masonry chamber for underground C.I.

Inspection chamber and bends with bricks having crushing

strength not less than 35Kg/Cm2 in C.M. 1:5 C.I. cover with

frame (Light duty) 455mm x 610mm intenal dimensions

total weight of cover with frame to be not less than 38Kg.

(Wt. of cover 23 Kg.) and Wt. of frame 15Kg.) (R.C.C. top

130 slabe with 1:2:4 mix (1-cement :2-coarse sand :4-graded 3624.51 Each

stone aggregate 20mm size) foundation concrete 1:5:10

inside plaster 15mm thick with cement mortar 1:3 finished

smooth with a floating coat of neat cement on walls and

bed concrete etc. complete.(ii) Inside dimensions 500mm x

700 mm and 450mm deep for pipe line with one or two

Steel Aluminum & Iron Work

Providing and fixing in position collapsible steel shutters

with vertical channels 20 x 10 x 2 mm braced with flat

iron diagonals 20 x 5 mm size with top and bottom rails

131 of T_rin 40x 40 x 6 mm with 38mm dia, steel pulleys 5731.43 SMT

complete with bolts, nuts, locking arrangements, stoppers

handles including applying a priming coat of red lead paint.

Providing and fixing Stainless steel pipe railing using round

S.S. pipe of various diameter of approved quality with S.S.

No. 304 consisting 8 % nickel having pipe of 16 gauge

including Horizontal and vertical pipe as per detailed

drawing. Vertical pipe ( posts ) firmly embedded in flooring

with concrete to give a proper and tough support, pipe

132 should be inter connected by stainless steel gas welding. All 2013.94 RMT

joints having a smooth finish including required fixtures and

fastening of approved quality. The fabrication should be

done as per detailed drawing and as per instructions given

by E.I.C. including all material and labour required etc.

Providing and fixing extruded aluminum window, Door,

etc having extruded aluminum Colour Powder Coated

section frame main outer size 127mm x 38.10mm x 1.35mm

(of Jindal Section no:2443,@ Wt.1.384 Kg/mt),horizontal

Two / Three track member size 122.20mm x 31.75mm x

1.10mm (of Jindal Section no:8787,@ Wt.

Kg/mt),vertical member of size 122.20mm x 31.75mm x

1.50mm (of Jindal Section no:8935,@ Wt. 1.398 Kg/mt)

133 with sliding shutters of horizontal member size 40mm x 2119.14 SMT

18mm x 1.29mm (of Jindal Section no:8949 @ wt.of

0.456Kg/mt),vertical member of size 40mm x 18mm x

1.29mm (of Jindal Section no:8947 @ wt.of

0.456Kg/mt/Section 8948,@ Wt. 0.457 Kg/mt) with 5 mm

thick transparent bronze colour tinted float glass with

powder coated aluminum fittings and fixtures and

transparent silicon sealant glass fixing to frame as per

details etc complete for window.

Providing and fixing Partition having extruded aluminum

Colour anodized section frame main outer size 63.50 x

38.10 x 1.95 mm(of Jindal Section no:4605,@ Wt 1.094 Kg

/ Rmt), horizontal two track member size 61.85 mm x

mm x 1.20mm (of Jindal Section no: 8687 @ wt.of

Kg/mt), vertical member of size 61.85 mm x 31.75mm x

1.30 mm (of Jindal Section no:8758 @ wt.of 0.0.659 Kg/mt)

with sliding shutters of horizontal member size 40mm x

134 18mm x 1.29mm (of Jindal Section no:8949 @ wt.of 1696.73 SMT

0.456Kg/mt), vertical member of size 40mm x 18mm x

1.29mm (of Jindal Section no:8947 @ wt.of 0.456Kg/mt/

Section 8948, @ Wt. 0.457 Kg/mt) with 5 mm thick

transparent bronze colour tinted float glass with powder

coated aluminum fittings and fixtures and transparent

silicon sealant glass fixing to frame as per details etc

complete for window.

Providing and fixing eco-friendly light weight calcium silicate

false ceiling tiles having Tegular edge & 15 mm Thick

Densified edges on the Tile Periphery for Extra Strength The

Light weight calcium silicate ceiling tiles shall have , light

reflection 85% non-combustible as per B.S.476 part IV,

100% humidity resistance and also having thermal

conductivity 0.043° w/m KC.for the best thermal Insulation .

The Light weight calcium Silicate tile shall be of approved

texture Fine fissured/ Spintone/Cosmos having NRC value of

0.5 & Globe having NRC value of 0.75 NRC or equivalent of

size 595 X 595 mm to be laid on true horizontal level

135 suspended inter locking metal grid of hot dipped galvanized 1657.57 SMT

steel sections (galvanizing @120 grams per sqm including

both side) consisting of main ‘T’ runner suitably spaced at

joints to get required length and size of 24X38mm made

from 0.30 mm thick (minimum) sheet, 1200mm centre to

centre, and cross ‘T’ of size 24X28mm made out of 0.33mm

(Minimum) sheet spaced 1200mm along spaced between

main ‘T’ at 600mm centre to centre to form agrid of

1200X600mm and secondary cross ’T’ of length 600mm and

size 24x28mm made of 0.30 mm thick (Minimum) sheet to

be interlocked at middle of the 1200X600mm panel to form

grid of size 600X600mm resting on periphery

walls/partitions

Removing dry or oil bound distemper by a washing and

136 scraping and sand papering the wall surface smooth 11.75 SMT

including necessary repairs to scratches complete.

Extra over item 135 for removing dry oil bound distemper

137 on ceilings and sloping roofs. 13.41 SMT

Distempeing (Two coats) with oil bound distemper of

approved brand and manufacture and of required shade on

wall surfaces to give an even shade, over and including a

priming coat with distemper primer of approved brand and

manufacture after thoroughly brushing the surface free from

mortar dropping and other foreign matter and also including

preparing the surface even and sand papered smooth.

Distempeing (One coats) with oil bound washable distemper

of approved brand and of required shade on wall surfaces to

give an even shade, after thorouhly brushing the surface

139 clean of all grease dirt, loose pieces of scales and also 28.62 SMT

including distempering with oil bound washable distemper

of preparing the surface even and smooth.

Wall painting (two coats) with plastic emulsion paint of

approved brand and manufacture on undecorated wall

140 surface to give an even shade including throughly brushing 83.53 SMT

the surface free from mortar droppings and other foreign

matter and sand papered smooth.

Extra over item 138 for every subsequent coat of wall

painting with plastic emulsion pain of approved brand.

142 wall primer of approved brand 16.36 SMT

Applying priming coat over new steel and other metel

surface after and including preparing the surface by

throughly cleaning, oil,grease, dirt and other foreign matter

and scoured with brushes fine steel wood, scrapers and

sand paper with ready mixed priming paint brushing red

Painting two coats (excluding priming coat) on new steel

and other metal surface with enamel paint, brushing,

144 interior to give an even shade including cleaning the surface 91.29 SMT

an even shade including cleanicn the surface of all dirt, dust

and other foreign matter.

Painting one coats (excluding priming coat) on previously

painted steel and other metal surface with enamel paint,

145 brushing to give an even shade including cleaning the 57.23 SMT

surface of all dirt, dust and other foreign matter.

Extra over item 141 and 143 for every subsequent coat of

146 paint 41.35 SMT

Appliying priming coat over new wood and wood based

surface after and including preparing the surface by

147 throughly cleaning oil, grease, dirt and other foreign matter, 41.67 SMT

sand papering and knotting. (C) Ready mixed paint brushing

priming for enamel

Extra over item 145 for every subsequent coat of priming

148 coat. (C) Ready mixed paint brushing priming for enamel 42.7 SMT

Painting two coats (excluding priming coat) on new wood

and wood based surface with enamel paint, interior to give

149 an even shade including cleaning the surface of all dirt, dust 91.79 SMT

and other foreign matter sand papering and stopping.

Painting one coats (excluding priming coat) on previously

painted wood and wood based surface with enamel paint, to

give an even shade including cleaning the of all dirt, dust

and other foreign matter.

Extra over item 147 and 148 for every subsequent coat of

Finishing wall with weather proof exterior emulsion paint on

wall surface (two coats) to give an required shape even

152 shade after thoroughly brushing the surface to remove all 119.07 SMT

dirt, and remains of loose powdered materials.etc complete

Applying two coats of putty & two coats of primer of

approved brand and manufacture on new wall surface to

153 give an even shade including thoroughly brushing the 40.19 SMT

surface free from mortar dropping and other foreign matter

and sand papered smooth.

Miscellaneous Building Item

Applying general insecticide pest control treatment to floors,

cupboards etc including labour materials etc. complete.

Using Imidacloprid 30.5 SCas Per IS 6313 part -II( (0.075%

154 concentration by mass) is recommended 10.5ml chemical 90.72 SMT

diluted with 5 liters of water application

0.5 litre chemical /Sqm of surface is recommended as per

Carring out plinth treatment to post construction / existing

structure by spraying chemical solution for termite control

treatment including labour and material consistment with

I.S.I specification. Using Chlordene and Chiorpurfiles 20 EC.

155 As Per 6131_paret-II Consentration Weight one percent is 123.12 SMT

recommended i.e one litre 20 EC chemical emulsion with

liter give 1 % concrentration inclusive of one litre chemical

emulsion appication at the rate of 5 Litre chemical / Sqm of

surface is recommended as per I.S

Carrying out wall treatment for termite control including

spraying with chemical solution in oil base including labour

and material Using Chlorpyriphos 20 ECAs per IS 6313 part -

II (1% concentration by mass) is recommended i.e one litre

chemical emulsion diluted with 19 liter oil base. Total

solution will be 20 liters inclusive of one liter chemical

emulsion application at the rate of 7.5 litre chemical / Sqm

of surface is recommended as per I.S.

Repairs to plaster of thickness 12 mm to 20 mm in patches

of area 2.5 sq.meters and under, including cutting the patch

in proper shape, raking out joints and preparing and

157 plastering the surface of the walls complete, including 462.3 SMT

disposal of rubbish to the dumping ground, all complete as

per direction of Engineer-in-Charge. With cement mortar 1:4

(1 cement : 4 fine sand)

Fixing chowkhats in existing opening including embedding

chowkhats in floors or walls cutting masonry for holdfasts,

embedding hold fasts in cement concrete blocks of size 15 x

10 x 10 cm with cement concrete 1:3:6 (1 cement :

coarse sand : 6 graded stone aggregate 20 mm nominal

158 size), painting two coats of approved wood preservative to 1505.30 Each

sides of chowkhats and making good the damages to walls

and floors as required complete, including disposal of

rubbish to the dumping ground, all complete as per

direction of Engineer-in-Charge. Door chowkhats

Removing and Refixing the window after necessary

repair/maintenance and if required provide new

159 bearing/busing or any other part if required including all 60.00 Sqft

labour and material etc. as per instructions of EIC

Removing and Refixing the window with MS Grill after

necessary repair/maintenance and if required provide new

160 bearing/busing or any other part if required including all 80.00 Sqft

labour and material etc. as per instructions of EIC

Providing erecting and fixing double coated ISI water tank

161 of required capacity each with all necessary fittings and 3.91 litre

connection etc. complete on terrace

Aldrop 20mm. dia Size with necessary fitting Iron Oxidised

162 20cms. Length 38.14 Each

Aldrop 20mm. dia Size with necessary fitting Iron Oxidised

163 25cms. Length 42.37 Each

Aldrop 20mm. dia Size with necessary fitting Iron Oxidised

164 30cms. Length 50.85 Each

DOOR CLOSER (GODREJ/DORMA / HAFELE) ITS 96 -

Providing and fixing Door Closer Dorma ITS 96 EN -2-4 Cam

action door closure /approved equivalent suitable for max

width of 1400 mm or approved equivalent make. The door

closer shall be with integrated in the frame or door leaf,

with rapidly decreasing opening resistance. Closing sped

165 and latching action adjustable; mechanically cushioned limit 2035.00 Each

stay. Adaptation to different rebate clearances possible non-

handled (i.e. suitable for right hand & left hand door);

max.opening angle 120 degree. All complete as per detail

drawing, as specified and as directed by Architect /

Consultant / Project - In - Charge.

DOOR CLOSER (GODREJ/DORMA / HAFELE) TS 71 -

Providing and fixing Door Closures

Providing and fixing alluminium section door lock with all

167 necessary fittings as per instruction of EIC 750.00 Each

Providing and fixing glass door lock with all necessary

168 fittings as per instruction of EIC 1950.00 Each

Providing and fixing wooden/glass/alluminium door closer

169 with all necessary fittings as per instruction of EIC 1700.00 Each

170 S.S. Stopper 20 Cm long of ASIS 304 126.27 Each

S.S. Pipe Handle for door 30 Cm size o ASIS

172 Labour charges - Carpentar 1st Class 801.00 Each

Labour charges - Mason 1st Class

174 Unskilled Labour 487.00 days

Towel Rail Pair of C.P. Brass Brackets 60mm x

175 20mm 316.96 Each

Providing and fixing M.S. fan clamps of shape and size as

176 specified in existing R.C.C. slab including cutting chase and 176.96 Each

P&F wooden file storage with opeable shutter with 450mm

deep shelves partition and side with all outer and inner

plywood surface covered by 1mm th. SF laminate finish

using 18mm th. Verticle horizontal and shutter, 12mm th.

177 Back, shelves commercial plywood approved make, 01mm 8000.00 SMT

th. SF finish laminate teakwood liping, SS conciled

handle,sliding lock & necessary hardware materials etc.

inside and liping french polish finish complete in all respect

by engineer in charge.

Providing and fixing wooden openable shutter with inner

plywood surface covered by 1mm th. SF laminate finish

using 18mm thick plywood shutter including teakwood

liping,SS conciled handle, sliding lock & necessary hardware

materials etc. inside and liping french polish finish complete

in all respects by engineer in charge

Double layer Roller Blinds Providing and installing Zebra

179 double laye rroller blind Polyester corded including all 2200.00 SMT

Providing and fixing 1.20 Metre high fencing with 2.0 Metre

long M.S. Angle posts 40mm x 40 mm x6 mm and oil

painting 3 coats fixed at 2.5 Mt,C/c. with five Horizontan

180 lines and two diagonals of galvanised steel barbed wire 388.05 RMT

weighting 9.38 Kg. per 100 Metre, strained and fixed to

posts with G.I,staples including fixing the postsin ground

with 0.5 M x 0.5.M x 0.5 M. block in C.C1:5:10 etc

Filling of crack after making necessary groove and applying

the water sealent coat and etc. complete as per the

instructions of EIC.

Applying weather proof rain coat of preferably Dr.Fixit brand

on required area after cleaning the surface and etc.

182 complete as per the directives of EIC. 320.00 SMT

Providing and filling rubbles including hand packing and

183 filling interstices with quarry spalls behind abutments and 1083.28 CMT

between returns as directed.

Providing and fixing RBT reinforced barbed wire weighting

184 9.38 Kg. per 100 Metre, strained and fixed to posts with 7.00 RMT

G.I,staples including fixing the postsin etc complete.

Providing and fixing concertina coil fencing with punched

tape concertina coil 600 mm dia 10 metre openable length (

total length 90 m), having 50 nos rounds per 6 metre

length, upto 3 m height of wall with existing angle iron ‘Y’

shaped placed 2.4m or 3.00 m apart and with 9 horizontal

R.B.T. reinforced barbed wire, stud tied with

185 G.I. staples and G.I. clips to retain horizontal, including 290.80 RMT

necessary bolts or G.I. barbed wire tied to angle iron, all

complete as per direction of Engineer-in-charge, with

reinforced barbed tape(R.B.T.) / Spring core (2.5mm thick)

wire of high tensile strength of 165 kg/ sq.mm

with tape (0.52 mm thick) and weight 43.478 gm/ metre

(cost of M.S. angle, C.C. blocks shall be paid separately)

Partition glass in living romm / bedroom / bethrooms -

providing & fixing 12 mm thick toughened extra clear float

glass partition including doors or opening (including of loor

spring or door closer) using dorma make spider / patch

fitting as per theit specification and requirement upto height

13'0". Item to include fitting as shown in the drawing at all

186 necessary joints and depending on the weight of the glass. 4959.00 SMT

Item to include sealant between two glass panels. Partition

with all hardware type and its sizes and placement to

ensure the partition is sturdy & providing and applying frost

film on internal glass partition panels neatly complete as per

the company specification.

Providing & Fixing furniture with 18 MM WPC Sheet for

Kitchen, Cupboard, Storage area etc. with 18 MM thick high

density sheet as directed of make Century / green ply or

equivalent brand including all required SS accessories like

187 handle, lock, hinges, screw, necessary hardware material 995.00 SMT

etc. & sides with all outer and inner surface covered by

1mm thick laminate finish with all required material

completed as directed by Engineer in charge.

188 Glass 12 mm thick 677.97 SMT

189 Glass 10 mm thick 593.22 SMT

190 Glass 8 mm thick 466.10 SMT

Providing and laying sun control or frosted milky glass film

191 as per approved colour, design, cutting complete as per 450.00 SMT

instructions by engineer in charge.

Miscellaneous items which are not included in the above list

and require to execute, shall be payable as per R&B SOR

2024-25 for Surat dist and same shall be approved by EE As per As per

193 (Civil) Corporate Office. Rate for Non SOR item shall be

requirement requirement

counted as per rate analysis approved by EE (Civil)

Corporate office

Total Amount (Excl. GST) in Rs.

Total Amount (Excl. GST) in Rs.

"All royalties, toll tax, local tax, development charges, and any other taxes etc., in

respect of this contract and also any statutory variation in future towards above

mentioned taxes & any other taxes if levied in future by statutory authority applicable

to the this contract shall be payable by the con-tractor and DGVCL will not entertain any

claim whatsoever in this respect.

The Contractor has to pay 1% Labour Welfare Cess of estimated cost to the concern

Government Department.

The contractor shall produce the receipt of payment of 1% welfare cess from the

respective govt. department before submission of final bill, otherwise final bill for the

works will not be finalized.

The proof of payment made by the contractor to the appropriate department shall be

submitted to DGVCL, failing which appropriate amount shall be withheld on getting

information/instruction from the concerned department.

I /We agree to carry out the above work at

Add (+)________% above . Rs.

Less (-) _________% below Rs.

Total cost of work. Rs.

(Total cost of work Rs. ______________________________

Signature of Tendered CEO & SE (O&M)

DGVCL,Circle Office

Seal of company