Upgradation of Existing WSS DrRPGMC Tanda

Amount

Excavation in foundation trenches etc. in earth work in all kinds of soil such as pick Work, jumper work, blasting hard or softs rock by chiselling where the blasting work is prohibited slushy daldal and saturated soil including pumping or bailing out water within all heights, stacking the excavated soil within all leads clear from the edge of excavation and then returning the stacked soil in 15Cm (fifteen Centimetres) layer when required into plinths, sides of foundation consolidating each depossited layer by ramming and watering and then disposing of all surplus excavated earth complete in all respect including all leads and Lifts as per the direction and to the entire satisfaction of Engineer-In-Charge.

Providing and laying cement concrete 1:6:12 (1 cement: 6 sand: 12 graded broken/crushed stone aggregate 40mm nominal size) mechanically mixed and curing complete, excluding cost of form work in foundation and plinth complete in all respect including all leads and Lifts as per the direction and to the entire satisfaction of Engineer-In-Charge.

Random rubble masonary/polygonal rubble masonry (uncoursed/brought to courses) with hard stone of approved quality in foundation and plinth including levelling up with cement concrete 1:6:12 (1 Cement: 6 Sand:12 graded stone aggregate 20mm nominal size) and plinth level in cement mortor 1:6 (1 cement:6 Sand) complete in all respect including all leads and lifts as per the direction and to the entire satiscation of Engineer-in-Charge.

Brick work using common burnt clay building bricks in supper structure above plinth level upto floor two level in Cement Mortor 1:6 (1cement: 6sand) with 2nd class bricks complete in all respect as per direction and to the entire satisfaction of Engineer- in- charge up to all leads and lifts.

Half Brick work using common burnt clay building bricks in super structure above plinth level upto floor two level in C.M 1:4 (1cement:4sand) complete excluding the cost of form work complete in all respect as per the direction and to the entire satisfaction of Engineer-In-Charge with in all leads and Lifts. (2nd class).

Providing and fixing pressed steel doors frames manufactured from commercial mild steel sheet of 1.25mm thickness including hinges jumb lock jamb, bend and if reuired angle threshold of mild steel angle of section 50X25 mm or base ties of 1.25 mm pressed mild steel welded or regidly fixed together by mechanical means, adjustable lugs with split and tails to each jamb including steel butt hinges 2.5 mm thick with guards,lock strike plate and shock absorber as specified and applying a coat of approved steel primer after pretretment of the surface complete in all respect as per the direction and to the entire satisfacton of Engineer-in-Charge with in all leads and lifts.

Providing form work with steel plates 3.15 mm thick welded with angle iron in frame 30x30x5mm so as to give a fair finish including centring,shuttering , strutting and proping etc. with battens and ballies height of propping and centring below supporting floor to ceiling upto all height and removal of the same for in-situ reinforced concrete and plain concrete work in :-

Foundation, footings, bases of columns etc and mass concrete complete in all respect including all leads and Lifts as per the direction and to the entire satisfaction of Engineer-In-Charge.

Flat surfaces such as soffits and suspended floors, roofs landing and the like floors etc upto 200mm in thickness complete in all respect as per direction and to the entire satisfation of Engineer- in- charge up to leads and lifts.

Sides and soffits of beams, beam haunching cantilever bresummers and lintels not excedding 1 mtr in depth in all height from floor complete in all respect including all leads and Lifts as per the direction and to the entire satisfaction of Engineer-In-Charge.

Providing and Laying cement concrete 1:2:4 (1 Cement: 2 Sand: 4 graded stone aggregate 20mm nominal size) and curing complete excluding the cost of form work and reinforcement for reinforced concrete work:-

Foundation, footings, bases of columns etc and mass concrete complete in all respect including all leads and Lifts as per the direction and to the entire satisfaction of Engineer-In-Charge.

Suspended floors, roofs landing and shelves and their support balconies, beams, girders, bressumers and cantilever upto floor two level as per the direction of Engineer-in-Charge with in all leads and lifts.

Providing and laying Mild steel /Tor steel reinforcement for RCC work including bending, binding and placing in position complete upto floor two level (tor steel) complete in all respect as per direction and to the entire satisfation of Engineer- in- charge up to leads and lifts.

Pointing on brick work with cement mortor 1:3 (1 cement : 3 sand) (raised and cut) complete in all respect as per the direction and to the entire satisfaction of Engineer-in-Charge with in all leads and lifts.

Providing and laying brick tiles over mumty roofs grouted with cement mortar 1:3 (1 cement :3 sand) over a 12 mm layer of cement mortar 1:3 (1 cement :3 sand ) and finished neat complete in all respect as per the direction and to the entire satisfaction of Engineer-in-Charge with in all leads and lifts.

6mm thick cement plaster to ceiling in CM 1:3 (1cement:3 sand) complete in all respect as per direction and to the entire satisfaction of Engineer- in- charge within all leads and lifts.

15mm cement plaster in single coat on rough side of brick/ concrete /stone walls for interior plastering upto floor two level including arrises, internal rounded angles, chamfers and/or rounded angles not exceeding 80mm in girth and finished even and smooth in cement mortar 1:6(1cement:6sand) complete in all respect as per direction and to the entire satisfaction of Engineer- in- charge up to all leads and lifts.

20mm thick cement plaster in single coat on rough side of brick/stone masonary for interior plastering upto floor two level including arrises internal rounded angle chamber and orrounded angles not exceeding 80mm in girth and finished even and smooth in Cement Mortor 1:6 (1 Cement: 6 Sand) complete in all respect as per direction and to the entire satisfaction of Engineer- in- charge up to all leads and lifts.

Providing and fixing M.S. grills of required pattern in wooden frames of windows etc. with M. S. flats square or round bars with round headed bolts and nuts or by screws plain grills complete in all respect as per direction and to the entire satisfaction of Engineer- in- charge up to all leads and lifts.

Providing and fixing panelled, glazed or panelled and glazed shutters for doors, windows and clearstorey windows including black enamelled iron but hings with necessary screws 40mm thick in 2nd class Deodar wood complete in all respect as per the direction and to the entire satisfaction of Engineer-in-Charge within all leads and lifts.

Providing and Fixing wire gauge shutters using galvanised M.S. wire gauge of I.S. gauge designation 85 G. with wire of dia 0.56 mm for doors windows and clerestorey windows including bright finished black enamelled iron hinges with necessary screws.40 mm thick- 2nd class deodar wood complete in all respect including all leads and Lifts as per the direction and to the entire satisfaction of Engineer-In-Charge.

Boulder/Stone filling dry hand packed tightly complete under floor complete in all respect as per direction and to the entire satisfation of Engineer- in- charge up to leads and lifts.

Providing plinth protection 50mm thick in cement concrete 1:3:6 (1cement:3sand:6 stone aggregate 20mm nominal size) complete in all respect as per the direction and to the entire satisfaction of Engineer-In-Charge within all leads and Lifts.

Construction course rubble hammer dressed ‘U’ shape open surface drain with side wall 15x22cms (Fifteen into twenty two centimeters) in cement mortar 1:6 (1 cement : 6 sand) and inside plastering with cement plaster 1:3(1 cement : 3 sand) including earth work and laying 10cm (Ten centimeters) cement concrete in 1:5:10 (1 cement: 5 sand: 10 graded crushed stone aggregate 40mm (Forty millimeters) nominal size) and 7.5cm (Seven decimal five centimetres)cement concrete 1:2:4 (1 cement: 2 sand: 4 graded crushed stone aggregate 20mm (Twenty millimeters) nominal size) and finished with a floating cost of neat cement complete as per standard design within all leads, lifts of materials and other incidentals.

Providing & fixing 40x3mm flat iron hold fasts 40cm long i/c fixing in frames with 100mm diameter bolts nuts and wooden plugs and embedding in cement concrete block 30x10x15 cm in CC 1:3:6 (1cement: 3sand: 6 graded stone agg. 20mm nominal size) complete in all respect as per direction and to the entire satisfaction of Engineer- in- charge up to all leads and lifts.

Providing and fixing of M.S. Fan Clamp type -1 of 16 mm dia M.S. bar bent to shape with hooked ends in RCC slab during laying including painting the exposed portion of loop as per standared desgin complete in all respect as per the direction of Engineer-in-Charge with in all leads and lifts.

White washing with lime on celing / sloping un-decorated wall surface Two coats to give an even shade including throughly brooming the surface to remove all dirt, dust and other foreign matter as per the direction of Engineer-in-Charge with in all leads and lifts.

Distempering with dry distemper of approved brand and manufacture (two coats) and of required shade on undecorated wall surfaces to given an even shade sand papered smooth complete in all respect as per the direction and to the entire satisfication of Engineer-in-Charge with in all leads and lifts.

Finishing walls with water proofing cement paint of approved brand and manufacture of required shade on un-decorated wall surface (two coats) to give an even shade after throughly brushing the surface to remove all dirt, dust and remains of loose material sand papered stopping complete in all respect including all leads and lifts as per the direction and to the entire satisfaction of Engineer-in-Charge.

Painting two coats (excluding priming coat) on new steel and steel based & other metal surfaces under coat of ready mixed paint brushing to give an even shade including cleaning of all dirts, dust and slopping in with paint others than white complete in all respect as per the direction of Engineer-in-Charge with in all leads and lifts.

Providing and fixing of anodized aluminium sliding door bolts anodized transparent or dyed to required colour and shade with bolts and nuts screws etc complete in all respect as per the direction and Satisfaction of Engineer-in-Charge with in all leads and lifts. (250 X 16)

Providing and Fixing aluminium Tower bolts (barrel type) anodised transparent with necessary screws etc. complete in all respect as per the direction and Satisfaction of Engineer-in-Charge with in all leads and lifts. (200X10 mm.)

Providing and Fixing Aluminium handles anodized transparent or dyed to required colour or shade with necessary screw etc. complete in all respect as per the direction and Satisfaction of Engineer-in-Charge with in all leads and lifts.. (100 mm).

Providnig and fixing of precast terrazzo tiles 20 mm thick marble chips of specified sizes laid in floors,treads of steps & landings on a bed of 25 mm average thickness of cement mortor 1: 6 (1 cement : 6 sand) jointed with neat cement slurry mixed with pigment to match the shade of tiles ( wherever required) including rubbing & polishing complete with tiles of below mentioned shades :- (grey) complete in all respect as per the direction of engineer-in-charge with in all leads and lifts.

Wiring for light point / fan point / exhaust fan / call bell point with 1.5 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed PVC conduit and earthing the light point with 1.5 Sq.mm. HRFRLS/PVC insulated single core copper conductor cable as required complete in all respect as per direction and to the entire satisfation of Engineer- in- charge up to all leads and lifts. Group C.

Wiring for circuit/sub-main with following size PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed steel conduit along with 1 No.HRFRLS/PVC insulated single core copper conductor cable of same size for earthing as required complete in all respect as per direction and to the entire satisfation of Engineer- in- charge up to all leads and lifts.

2 x 2.5 Sq. mm.

2 x 4.0 Sq. mm.

2 x10 Sq. mm.

Supplying & fixing wooden boxes of following sizes (nominal size) on surface or in recess suitable for fixing phenolic laminated sheet cover in front including painting etc. as required complete in all respect as per the direction and to the entire satisfaction of Engineer-In-Charge within all leads and Lifts.

178mm.x102mm.x60mm. Deep

229mm.x102mm.x60mm. Deep

Supplying and fixing metal box of 100mmx100mmx60mm deep (nominal size) on surface/recess with suitable size phenolic laminated sheet cover in the front including providing and fixing 5 pin 5/6 amps socket outlet and 5/6 amps, piano type switch, connections, painting etc. as required complete in all respect as per the direction and to the entire satisfaction of Engineer-In-Charge within all leads and Lifts.

Supplying and fixing metal box of 180mmx100mmx60mm deep (nominal size) on surface/recess with suitable size phenolic laminated sheet cover in the front including providing and fixing 5 pin 5/6 amps socket outlet and 5/6 amps, piano type switch, connections, painting etc. as required complete in all respect as per the direction and to the entire satisfaction of Engineer-In-Charge within all leads and Lifts.

Supplying and fixing ceiling rose on the existing junction box / wooden block including connections etc. as required complete in all respect as per the direction and to the entire satisfaction of Engineer-In-Charge within all leads and Lifts.

Supplying and fixing bakelite batten/angle holder including connections etc. as required complete in all respect as per the direction and to the entire satisfaction of Engineer-In-Charge within all leads and Lifts.

Supplying and erection of 6 amps. to 32 amps. rating, 10 KA breaking capacity, 240 volts, 'C' curves, miniature circuit breaker of following poles in the existing MCB DB complete with connections etc. as required complete in all respect as per the direction and to the entire satifiction of Engineer-In-Charge with in all leads and Lifts. Single pole. Cat-A.

Supplying and fixing following rating, double pole, 240 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required complete in all respect as per the direction and to the entire satifiction of Engineer-In-Charge with in all leads and Lifts. Single pole. 63 Amps. Cat-A

Supplying and fixing following rating, double pole (single phase & neutral) 240 volts, residual current circuit breaker (RCCB), having a sensitivity current up to 300 miliampers in the existing MCB DB complete with connections, testing and commissioning etc. as required complete in all respect as per the direction and to the entire satifiction of Engineer-In-Charge with in all leads and Lifts. Single pole. 63 Amps. Cat-B

Supplying and fixing of following way, single pole and neutral sheet steel MCB distribution board, 240 volts, on surface / recess, complete with tinned copper bus- bar, wire set, neutral link, earth bar, din-bar, detachable gland plate, blanking plate, cable, identification labels interconnections, phosphatized and powder painted, including earthing etc. as required complete in all respect as per the direction and to the entire satisfaction of Engineer-In-Charge within all leads and Lifts.

Double door-4 way

Double door-8 way

Earthing with G.I earth pipe 4.5 mtr. long and 40mm dia, including accessories and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. (but without charcoal or coke and salt) complete as required complete in all respect as per the direction and to the entire satisfaction of Engineer-In-Charge within all leads and Lifts.

Extra for using salt and charcoal for pipe earth electrode complete as required complete in all respect as required as per the direction and to the entire satisfaction of Engineer-In-Charge within all leads and Lifts.

Earthing with copper earth plate 600 mmx600 mmx 3 mm thick, including accessories and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. (but without charcoal or coke and salt) as required complete in all respect as per the direction and to the entire satisfaction of Engineer-In-Charge within all leads and Lifts.

Supplying and laying 8 SWG Copper wire at 0.50 mtr. below ground level for earth electrode conductor, including soldering etc. as required complete in all respect as per the direction and to the entire satisfaction of Engineer-In-Charge within all leads and Lifts.

Providing, laying and fixing of one No. aluminium conductor, PVC insulated and PVC sheathed, armoured/XLPE power cable, working voltage 1100 volts grade on surface etc. of the Armoured cable 10 sq. mm (twin core) size complete in all respect as per the direction and to the entire satisfaction of Engineer-In-Charge within all leads and Lifts.

Providing, Installation, testing and commissioning of ceiling fan with regulator, including wiring the down rods of standard length (up to 30 cm) with 16/0.20 mm twin twisted flexible, cotton braided, copper cable, including providing and fixing phenolic laminated sheet cover on the fan box and earthing etc. complete in all respect as per the direction and to the entire satisfaction of Engineer-In-Charge within all leads and Lifts. (Ceiling Fan 1200 mm sweep, Category-A)

Providing and fixing ultra slim decorative extruded box fixture with domestic electronic ballast, snap-on installers, suitable for 28 watt FTL (T5), complete with all accessories (including one No. T-5 Tube), connections, testing and commissioning etc. as required complete in all respect as per the direction and to the entire satifiction of Engineer-In-Charge with in all leads and Lifts. 1 x28 watt-FTL(T5)

Providing and fixing Street Light including all acessories as required complete in all respect as per the direction and to the entire satifiction of Engineer-In-Charge with in all leads and Lifts. (M.R.)

Providing and fixing PVC pipe as required complete in all respect as per the direction and to the entire satisfaction of Engineer-In-Charge within all leads and Lifts. (M.R.)

Providing and fixing of CFL 20 watt light complete in all respect as per the direction and to the entire satifiction of Engineer-In-Charge with in all leads and Lifts. (M.R)

Ajeev Kumar

Dheeraj Garg