Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹4.9 LAccepted-AOC VILL UKILPARA P O P S BASIRHAT NORTH 24 PARGANAS | BASIRHAT | NORTH 24 PARGANAS | ₹4.9 L | L1 | Accepted-AOC 1st Lowest |
| 2 | L2₹4.9 LRejected-AOC VILLAGE P O GHUNI P S NEW TOWN KOLKATA 700 157 | KOLKATA | NORTH 24 PARGANAS | WEST BENGAL | 700157 | ₹4.9 L | L2 | Rejected-AOC 2nd Lowest |
| 3 | L3₹4.9 LRejected-AOC VILL FULBERIA P O BELIATORE PS BELIATORE DIST BANKURA PIN 722203 WB | BANKURA | WEST BENGAL | 722203 | ₹4.9 L | L3 | Rejected-AOC 3rd Lowest |
Tender Value
₹4.9 L
EMD Value
₹9,765
Closing Date
23 Feb 2026, 5:00 pmClosed
EE/BID
Office of the Executive Engineer Basirhat Irrigation Division Postal address Dhaltitha with Telephone No. 03217 265258
Repair of Kankrasuti Bridge over Muskata Khal at Mouza Kankrasuti, Block Baduria under Basirhat Irrigation Sub-Division of Basirhat Irrigation Division, District- North 24 Parganas.
2026_IWD_1000187_39
e NIT No. -WBIW/EE/BID/e-NIT- 29 of 2025-26
Open Tender
CIVIL WORKS
30 days
Mouza Kankrasuti
Please refer Tender documents.
5 documents required · 5 mandatory
₹9,765
13 Mar 2026
10 Feb 2026
25 Feb 2026
10 Feb 2026
23 Feb 2026
10 Feb 2026
Dismantling all types of masorny excepting cement concrete plain or reinforced, stacking serviceable materials at site and removing rubbish as directed within a lead of 75 m In Ground Floor
Ordinary Cement concrete (mix 1:1.5:3) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement if any, in ground floor as per relevant IS codes including cost and carriage of all materials complete. (i) Pakur Variety.
Hire and labour charges for shuttering with centering and necessary staging upto 4 m using approved stout props and thick hard wood planks of approved thickness with required bracing for concrete slabs, beams and columns, lintels curved or straight including fitting, fixing and striking out after completion of works (upto roof of ground floor) (f) 25 mm to 30 mm shuttering without staging in foundation.
Supplying and laying Polythene Sheet (150gm / Sqm.) over damp proof course or below flooring or roof terracing or in foundation or in foundation trenches.
Supplying, fitting and placing HYSD bar reinforcement in Sub-structure including initial straightening, straightening of coils bars, removal of loose rust (if any), cutting to requisite length bending, binding with annealed wire not less than 1 mm in size and conforming to IS 280 at every intersection hooked and bent to correct shape and placed on forms etc. including cost of black annealed wire and cost of loading, unloading, carriage of all steel materials complete as per drawing and technical specifications and direction of Engineer-in-charge. 2(ii)b. Steel materials : Tor Steel rods / HYSD bars / TMT bars (JSW JSPL / Shyam / SRMB /SSL/ BMASL / Electrosteel)(Fe 415 /Fe 500 /Fe 500D, conforms to lS: 1786).
Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding/staging where necessary (Ground floor).[Excluding cost of chipping over concrete surface] (i) With 1:4 cement mortar (b) 15 mm. thick plaster. (i) Ground Floor
Providing and laying pre-cast brick block pitching of required size (53Cm. x 53 Cm, x 25 Cm. or as directed by the Engineer-in-charge ) with 1st class kiln burnt bricks in cement mortar including flush pointing on all faces except exposed face which to be plastered with 19 m.m. thick cement plaster , curing, dressing, ramming & preparing subgrade in slopes & bed complete with necessary earth work not exceeding 300 mm in depth with all leads & lifts including cost of all materials/ blocks up to site by all means of transport. The gap between adjacent blocks will not be more than 10 m.m.(Sand, cement mortar mix for making blocks, pointing & plastering is1:4)
Making filter with well graded 40 mm down ballasts and laying uniformly behind weep holes, below pitching on bed, side slopes including supply and carriage of all materials to site including preparing bed with earthwork up to 30 cm depth, where necessary and compacting with wooden malllet after laying to achieve designed section as per direction of the Engineer- in - Charge (measurements will be on finished work / in stack after deducting necessary void).) (b) 1st class brick ballast
Applying Exterior grade Acrylic primer of approved quality and brand on plastered or cencrete surface old or new surface to receive decorative textured (matt finish) or smooth finish acrylic exterior emulsion paint including scraping and preparing the surface throughly, complete as per manufacturer's specification and as per direction of the EIC. In Ground Floor: (a) One Coat
Protective and Decorative Acrylic exterior emulsion paint of approved quality, as per manufacturer's specification and as per direction of Engineer-in-Charge to be applied over acrylic primer as required. The rate includes cost of material, labour, scaffolding and all incidental charges but excluding the cost of primer. In Ground floor (Two Coat) a) Normal Acrylic Emulsion
Please Enable Macros to View BoQ information
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.60 MB
2911.pdf
Tender Documents • 0.50 MB
BOQ_2451087.xls
BOQ • 0.36 MB
Download all tender documents and submit your bid