REPAIR/MAINTENANCE FLOORING TILING AND CONNECTED B/R WORK AT ADM AREA AT LANSDOWNE

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises from MoD land complete all as specified and as directed.

M&L for coloured glazed ceramic tiles of any design and pattern, 300x450x 7 mm thick, as in dado etc including 10 mm thick rendering as in backing coat in CM 1:4, Set and jointed in neat cement slurry and pointed in white of coloured cement to match the shade of the tiles. Tiles shall be confirming to IS-15622:2017, Group B III with average water absorption between 10% to 15%. Length, width and straightness of sides + 0.20% (Max deviation). Thickness + 4.0% (Max deviation). Straightness of sides and Rectangularity +0.15% (Max Deviation). surface flatness + 0.22% (Max deviation). Breaking strength 500 N (Minimum) and minimum 95% tiles shall be free from visible defects. Note: Shade of the tiles including Colour, design and pattern shall be got approved by AGE(I) Complete all as specified and directed

M&L for Non- skid coloured ceramic tiles 400x400x7 to 8mm thick in floor etc including 15mm thick screed bed in CM 1:6, Set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of the tiles.Tiles shall be confirming to IS-15622.2006, Group B II with average water absorption between 3% to 6%. Length, width and straightness of sides + 0.10% (Max deviation). Thickness + 5.0% (Max deviation). Centre & Edge curvature and warpage + 0.50% (Max deviation). Breaking strength 1000 N (Minimum) and minimum 95% tiles shall be free from visible defects. Note:- Shade of the tiles including Colour, design and pattern shall be approved by AGE (I).Complete all as specified and directed

M&L Virified Ceramic tiles light colour 600x600x10 mm thick (square/ rectangular) polished,in floors including 15mm thick screed bed in CM 1:6 etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed.

M&L Virified Ceramic tiles light colour 600x600x10 mm thick (square/ rectangular) polished,in skirting including 10mm thick backing coat in CM 1:6 etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed.

Demolition of stone slabs and tiles of any description or thickness in floors, aprons etc laid,bedded in any mortar complete all as specified and directed.

M&L Granite 18-20 mm thick (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and as directed.

M&L edge moulding to 18-20mm thick granite stone of counters vanities etc. including machine polishing to edge to give high gloss finish etc complete all as specified and as directed.

M&L for 75 mm thick PCC (1:4:8) type D2, (using 40 mm graded stone agg) as in sub base complete all as specified and directed.

M&L for chequered cement concrete tiles 300X300X25 mm thick,(ISI Marked) rubber finished as in floors laid over 20 mm thick screed bed in cement mortar 1:6 jointed with grey cement slurry mixed with pigment to match the shade of the tiles complete all as specified and directed