Karnataka

AOC

Works

Buildings

Renovation work at CNNL Corporate office Anand rao circle, Bangalore

Cauvery Neeravari Nigam Limited

CNNL HC Div Yediyur | Bengaluru Urban, Karnataka

Amount: ₹42.7 LCloses: 26 Feb 2026Closed

Timeline

Published11 Feb 2026
Closed26 Feb 2026
Awarded—

Bids

1 Bid26 Feb 2026

#	Company	Amount	Status
1	HARSHAKUMAR B M ₹32.6 Laccepted-aoc	₹32.6 L	accepted-aoc

Tender Value

₹42.7 L

EMD Value

₹85,500

Closing Date

26 Feb 2026, 9:30 pmClosed

Tender Inviting Authority

Office Inviting Bids

Cauvery Neeravari Nigam Limited

Contact Person

S T SREENIVASA

Office Number

Mobile Number

Work Description

Renovation work

Tender Information

Tender ID

CNNL/2025-26/BD/WORK_INDENT4270

Reference Number

CNNL/2025-26/BD/WORK_INDENT4270

Tender Type

Open

Product Category

Buildings

Form of Contract

Two Tender Document System(Two Cover)

Location

CNNL HC Div Yediyur

Source Website

Subscribe to view

Documents Required

7 documents required · 7 mandatory

Technical Bid

RequiredAnnual Turnover Certificate

RequiredKPWD REG. CERTIFICATE

RequiredGST REGISTRACTION CERTIFICATE

RequiredSIGNED BID CAPACITY CALCULATION

RequiredAudited balance sheets with UDIN Number

RequiredITR Files

RequiredWorkdone certificate

Eligibility Criteria

Tenders from Joint ventures are not acceptable.

Bidders shall not be under a declaration of ineligibility for corrupt and fraudulent practices issued by Government of Karnataka

Bidders shall ensure upload of relevant document certifying his/her status as Scheduled Caste/ Scheduled Tribe/other reserved category as prescribed in the tender document.

It shall be the responsibility of the Bidder to ensure credit of Tender Processing Fee and EMD into the respective receiving bank accounts of e-Procurement on or before the last date and time of bid submission.

EMD Payments through e-Payment mode shall be made as one single transaction and payments made in part are liable for rejection.

The tenders should be submitted in two documents through on line

Document I (Technical Bid) shall contain the following documents

A copy of certificate of registration issued by KPWD

Earnest money Deposit(EMD) can also be submitted As per circular No.FD5Expenditure-12/2023 Dt:10.02.2023, in the form e-Bank Guarantee

The Intending bidders / tenderers are advised to visit the site of work and also access the tender documents well in advance

Conditional tenders will not be accepted.

The tenderer shall bear all costs associated with the preparation and submission of his tender, and the employer will in no case be responsible and liable for those costs

The TENDER PROCEESING FEE will not be refunded

The employer is not responsible for any delay in accessing Karnataka public Portal

All the formats prescribed in the bid document shall be filled by the bidders in a complete manner. Incomplete formats may constitute sufficient reason at the discretion of CNNL for rejection of the bid

All scanned documents to be uploaded shall be in original and the Executive Engineer will verify the original documents at any stage before recommending for approval. Bidders should produce their original documents for verification during office hours related to uploaded documents in Karnataka public procurement portal immediately after opening of technical Bid

Further particulars, if any, required by the bidders can be had from the office of the Executive Engineer, H.C. Division, Yediyur during office hours on all working days. It may be noted that if any of the calendar of any event mentioned above happen to be General Holiday / Declared holiday, the next working day will hold good for the respective events.

The intending bidders should note that, if any of the lands (either in part/parts or in whole) required for the work is not yet acquired by the Nigama, it shall be the responsibility of the successful bidder to take possession of such land by consent of the owners before commencement of work at no extra cost to the Nigam and no claims whatsoever relating to non-availability of land would be entertained

Defect liability period will be 1 year from the date of completion of entire work.

Tenderers shall not be under a declaration of ineligibility for corrupt and fraudulent practices issued by the Government of Karnataka

The Tenderer should furnish the Name of the individual / firm/ Company with address and telephone number with place of registration, year of incorporation etc

The application made by the firm / company shall be signed by a person holding the power of attorney, in which case the Tenderer should furnish a copy of power of attorney signed by the board of directors in Karnataka Public portal along with their bid.

The scanned signature of the bidders / authorized representatives of the bidders shall be attached while uploading the Bid document

The intending Bidder/firm/company should furnish list of man power available with him for taking up above work

The intending Bidder/firm/company shall provide accurate information on the related form about any litigation or Arbitration resulting from contracts completed or ongoing under its execution over the last five years. The consisting history of awards against the tenderer may result in failure of the application

Tenderer should furnish a copy of the Income Tax Return (ITR) for the preceding five financial year (2020-21 to 2024-25).

The intending Bidder/firm/company shall provide the audited balance sheets or other financial statements acceptable to the employer for the last five years (2020-21 to 2024-25) and must demonstrate the current soundness of the applicants financial position and indicate its prospective long term profitability. If deemed necessary the employer shall have the authority to make enquiries with the applicants bankers

The Tenderer should furnish a valid copy of GST Registration Certificate along with updated GST clearance copies

Royalty Recovery from the contractors bill will be made as per Government Circular Dt:-24.01.2025 & further any Orders/Circulars issued by Government of Karnataka from time to time

The bidder should follow the instructions issued in the Circular dated: 07-11-2023 of Mines and Geology Department regarding Procurement of materials from the licensed Mines Contractor. Any Violations in this regard the action will be taken as per the Circular

The contractor is also required to pay quarry Fees, Royalties, Octroi Dues levied by the state Government or any Local body or an authority and ground rent, if any, charged by the Executive Engineer for stacking materials. No Extra Payment on this account will be made to the contractor

The rates quoted by the contractor must be excluding GST. The contractor is also required to pay quarry Fees, Royalties, Dues levied by the state Government or any Local body or an authority and ground rent, if any, charged by the Executive Engineer for stacking materials. No Extra Payment on this account will be made to the contractor

Applicable GST will be paid separately & GST will be deducted as per the prevailing Government Orders from time to time

Increase in GST shall not be paid in extended period of contract for which the contractor alone is responsible for delay as determined by the authority while granting the extension of time

Materials required for the work shall be procured by the Contractor themselves and should get the same tested by the quality control authority of CNNL before use in this work

The work includes all lead and lift / de lift and work shall be carried out as per instruction of engineer-in-charge of the work. And all the specification as per Indian road congress and all relevant Indian codes. The rate for the specifications in the Schedule-B includes all lead and lift, irrespective of distance and height. No extra claim will be entertained for additional lead and lifts

The intending bidder/firm/Company is advised to inspect the site in detail before participating in the tender

Performance security-1.Within 20 days of receipt of the letter of acceptance, successful tenderer shall deliver to the employer a security deposit for an amount equivalent to 5.00% of the contract price & additional performance security for unbalanced tenders if quoted below in accordance with the clause 29.1 of ITT and clause 43 of the conditions of the contract. 2.The successful bidder should execute work agreement within 20 days from the date of issue of Letter of Acceptance, failing which his tender will be cancelled & EMD will be forfeited.3.FSD can also be submitted as per GO: FD-12/2023 Dated :15-05-2023.As per circular No. FD5Expenditure-12-2023 Dt:15.05.2023, the requisite Security Deposit can also be submitted in the form e-Bank Guarantee

Security Deposit will be released after the completion of the defect liability period

Building and other construction workers welfare cess: The contractor shall subscribe 1.00% of gross amount of each bill payable to him in respect of contract to the building and other construction workers welfare cess as per GO No: LD 300 LET 2006, Bangalore, dated: 18-01-2007. The amount of subscription will be recovered out of payable amount to him in each bill. This component is deemed to have been included in the quoted rate / Item rate

Successful Bidder should submit the PERT Chart at the time of Execution of Agreement& should adhere to the accepted programme submitted by him under any circumstances without linking to the pending payment of the work

Tendering by the joint venture will not be permitted

Sub leasing /subcontracting in any form is prohibited. Bids of bidders with track record of Sub-leasing/subcontracting are liable for rejection

The intending bidders shall visit the site, identify the quarries, ascertain availability for the quantity and quality of the materials required for the work and shall quote his rates accordingly. No extra claim whatsoever will be entertained in this regard

All precautions should be taken by the contractor so that there are no damages to such public/private properties& to avoid any damage to the utilities during excavation as well as utility shifting

Contractor should follow strictly the prevailing rules of labour act

Contractor should adhere to HSE (Health Safety Environment) policy applicable for similar projects

Contractor to that extent should submit HSE document defining all the procedure including the policies before execution of the project

Contractor should take all precautions to ensure that no damage is caused to the existing structures which have been constructed by other agencies during project execution. If any damage is caused, it has to be rectified at his own risk and cost

The intending bidders should inspect & get confirm regarding availability of materials and has to make own arrangements to get the construction materials. There is no extra claims will be entertained from Nigam

Uploading of NSIC Certificate or Other certificate for relaxation of EMD Payment is not accepted as per government Order Dated 26.03.2019

CNNL reserves the right of rejecting all or any of the tenders without assigning any reasons

Typo graphical errors if any will not be the ground for any claims by the contractor

Tenders shall remain valid for a period not less than ninety days after the deadline date for tender submission& earnest money deposit for the tender shall be valid for 45 days beyond the validity of the tender

The undersigned reserves the right to either postpone or to cancel the entire process of tender

Tenders shall remain valid for a period not less than 90 days after the deadline date for tender submission

Design and drawing pertaining to the work should be got approved by the competent authority of CNNL before execution of work

As per Government order No:DPAR 154 e-Gov2024 dated:23/07/2024 Contract management module has to be mandatorily followed by the Contractor

Technical Criteria

General

Minimum financial turnover (civil engineering construction works) not less than two times the annual payments from this contract (Rs. xxxxx Lakhs)

Satisfactoriy completed (atleast 90%) as prime contractor at-least one such similar work of value not less than Rs. xxxxxxx (80% of estimated cost of tender)

Tenderer or his identified Sub Contractor should possess valid Electrical License for executing building electrificatio works and should have executed similar electrical works totallng Rs. xxxxxx (not less than 50% of electrical works) n any one year

List of existing commitments and ongoing works

List of works for which tenders already submitted

Banker Details for reference

Qualification and experience of the key technical and management personnel in permanent employment with the tenderer and those that are proposed to be deployed on this contract, if awarded

Past Experience

The intending bidder/firm/company should have Mandating satisfactorily completed 90% of work individually executed as prime contractor, for at least one similar type of work (Renovation/Repair/Improvement/ Upgradation of buildings) of value of Rs. 22.00 Lakhs (Excluding GST) 50% of the cost of work during the last five financial years from 2020-21 to 2024-25.

Work Done Certificate

Capabilities of Vendor

Bidder should be registered Civil Contractor of KPWD of Class mentioned as per Notification

PWD Registration Certificate (Class I/II/III/IV)

Valid GST registration certificate should be uploaded

GST Registration

Financial Status

Latest Income tax clearance certificate should be uploaded

ITR Filed Copy (Mentioning PAN)

Audited balance sheets & Turnover certificate for any two years in the preceding 5 years (2020-21 to 2024-25) mentioning UDIN number should be uploaded. Audited balance sheets & Turnover certificate mentioning UDIN number should be mandatorily uploaded along with tender, failing which tender will be liable for rejection

Audited CA Certificate of Annual Turnover

To qualify for award of this contract, each Tenderer in his name should have in the last five years i.e. 2020-21, 2021-22, 2022-23, 2023-24 & 2024-25. The intending bidder should have achieved minimum financial turnover Rs.43.00 Lakhs (Excluding GST) in any two financial years during the preceding five years (in all classes of civil engineering construction works only). Audited balance sheet certified by the chartered accountant should be enclosed. Additional weightage at 10% for each year will be given for turn over to bring it to 2025-26 price level).

Audited CA Certificate of Annual Turnover

Others

Signed Bid capacity (Tender Capacity) calculation as per Notification.

Others -- Tender capacity

Work Locations

Fee & Financial Details

Tender Fee Amount

₹1,070

EMD Fee Amount

₹85,500

Important Dates

Last Activity

26 Feb 2026

Published

11 Feb 2026

Bid Opening

27 Feb 2026

Download Ends

18 Feb 2026

BOQ Preview

•

Renovation work at CNNL Corporate office Anand rao circle, Bangalore

•

SR23-24 Vol.2PNO189 IN19.22.1 Dismantling tile work in floors and roofs laid in cement mortar including stacking material to the appropriate disposal area as per direction of Engineer-in-charge (For thickness of tiles 10 mm to 25 ... 167.31 Sqm

•

SR23-24 Vol.2,PN193 I NO19.55) Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground to the appropriate disposal area as per direction of Engi... 211.47 Sqm

•

SR23-24 Vol.2PN193 I NO19.61 Dismantling weather proof course and removing and conveying the debris to a distance to the appropriate disposal area as per direction of Engineer-in-charge. 6.08 Sqm

•

SR23-24 Vol.2PN193I NO19.56 Dismantling aluminium/ Gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of unserviceable material and stacking of serviceable material to the appropriate disposal ... 77.45 Sqm

•

SR23-24 Vol.2PN188I NO19.12.1 Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking to the appropriate disposal area as per direction of Eng... 20.88 Sqm

•

SR23-24V.2PNO 191INO19.39.1 Dismantling precast concrete or stone slabs in walls, partition walls etc. including stacking to the appropriate disposal area as per direction of Engineer-in-charge. Thickness up to 40 mm 7.20 Sqm

•

SR23-24 Vol.2PN187I NO19.7.3 Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material to the appropriate disposal area as per direction of Engineerin-c... 0.71 Sqm

•

SR23-24V2PN209I N20.123 Removing of existing old or broken wash basin / urinals/ Indian Water closet/ European Water closet and disposing it with all cost and conveyance labour for all items of work, HOM with all lead and li... 9.00 Each

•

SR23-24 Vol.2PN192I N19.51 Dismantling of flushing cistern of all types (C.I./PVC/Vitreous China) including stacking of useful materials near the site and disposal of unserviceable materials to the appropriate disposal area as ... 9.00 Unit

•

SR23-24 Vol.2PN191I N19.44.1 Dismantling C.I. pipes including excavation and refilling trenches after taking out the pipes,manually/ by mechanical means breaking lead caulked joints, melting of lead and making into blocks includi... 70.00 m

•

SR23-24 V2PN191IN19.43.1 Dismantling G.I. pipes (external work) including excavation and refilling trenches after taking out the pipes, manually/ by mechanical means including stacking of pipes to the appropriate disposal are... 110.00 m

•

SR23-24 Vol.2PN149I N15.2 Polyurethane based single Component for Existing surface : Providing and Applying PU based Elastomeric Liquid Applied PU Waterproofing Membrane single component, cold applied, water based acrylic PU d... 48.65 Sqm

•

SR23-24V1P.N15&I.N 2.1.4issue rate D:08-10-2025 Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes... 6.08 Cum

•

SR23-24 P.No.60v2 I.No9.9 Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Iv... 31.85 Sqm

•

SR23-24P.N.62 v2& I.No 9.21.2 Providing and laying Vitrified tiles with thickness 9-10 mm in floor with different sizes with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all co... 29.06 Sqm

•

SR23-24 P.No.62vol2& I.N9.20.2 Grouting the joints of flooring tiles having joints of 3 mm width, using epoxy grout mix of 0.70 kg of organic coated filler of desired shade (0.10 kg of hardener and 0.20 kg of resin per kg), includi... 51.33 Sqm

•

SR23-24 P.N71v2& I.N10.14issue ratedated08-10-2025 Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle gre... 150.36 Sqm

•

SR PWD 23-24 P.No.122, vol 2 & I.No Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with cla... 135.00 m

•

SR23-24 P.N128v2&I.N13.64.1 Providing and fixing Sewer (SWR) pipes, including all fittings, This includes jointing of pipes & fittings with one step solvent cement, trenching, refilling & testing of joints complete as per direct... 61.00 m

•

SR PWD 23-24 P.No.128, vol 2 &I.No 13.64.2) Providing and fixing Sewer (SWR) pipes, including all fittings, This includes jointing of pipes & fittings with one step solvent cement, trenching, refilling & testing of joints complete as per direct... 120.00 m

•

SR23-24 P.N127vol2& I.No 13.59 Providing and fixing PVC (S.W.R) Nahani Trap 10cms x 10cms with all fitting rrangements & all necessary accessories complete etc. complete as per specification and directions of the Engineer-in-charge... 9.00 Each

•

SR23-24 P.N28v 2&I.N13.63 Providing and fixing PVC (S.W.R) Multi Floor Trap 10.0 cm X 7.5 cm X 5.0cm X 4.0 cm with all fitting arrangements & all necessary accessories complete etc.. complete as per specification and directio... 10.00 Each

•

SR23-24 P.N121v2&I.No 13.27.2 Providing and fixing unplasticised P.V.C. connection pipe with PTMT Nuts, collar and bush of approved quality and colour. 15 mm nominal bore with 450 mm length etc., complete as per specification and... 29.00 No

•

SR23-24 P.N.121v2& I.N14.95a Providing and fixing Bidet spray made of Stainless steel with all concealed fitting arrangements & all necessary accesories complete - Class Economy etc., complete as per specification and directions ... 6.00 No

•

SR23-24 P.N120,vol2& I.N13.22.1.1 Providing and fixing PTMT grating of approved quality and colour. Circular type 100 mm nominal dia etc., complete as per specification and directions of the Engineer-in-charge of the work. 25.00 No

•

P-131sr 23-24V2It- 14.1.1 Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually co... 1.00 Each

•

P-131sr 23-24 V 2It-14.3.1 Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. ... 5.00 Each

•

P-131sr 23-24 Vol2It-14.4.1 Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard ... 4.00 Each

•

P-133Vol2 It- 14.7.8 White Vitreous China Surgeon type wash basin of size 660x460 mm with a pair of 15 mm C.P. brass pillar taps with elbow including operated levers etc., complete as per specification and directions of t... 12.00 Each

•

P-137V2It- 14.36.1 Waste coupling 31 mm dia of 79 mm length and 62mm breadth weighing not less than 45 g.etc., complete as per specification and directions of the Engineer-in-charge of the work. 17.00 Each

•

P-135V2It- 14.22A Providing and fixing CP Brass 32mm size Bottle Trap of approved quality & make and as per the direction of Engineer-in-charge. 12.00 Each

•

P-139Vol2It- 14.55a Providing and fixing Bib cock with wall flange made of Stainless steel with all concealed fitting arrangements & all necessary accesories complete - Class Economy etc., complete as per specification ... 6.00 No

•

P-139Vol2It- 14.54a Providing and fixing Angle cock with wall flange made of Stainless steel with all concealed fitting arrangements & all necessary accessories complete -Class Economy etc., complete as per specification... 22.00 No

•

P-144Vol2It- 14.87 Providing and fixing Towel rail (Rectangular) made of Stainless steel with all concealed fitting arrangements & all necessary accesories complete - Class Economy etc., complete as per specification an... 6.00 No

•

P-136Vol2It- 14.32.1 Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing ircular shap... 12.00 Each

•

23-24SRP.n16V2 I N.6.27 Providing and laying Gypsum panel partitions 100 mm thick with water proof Gypsum panels of size 666x500x100 mm, made of calcite phosphor Gypsum fixed with tongue and groove, jointed with bonding plas... 8.25 Sqm

•

23-24SR P.n.70 Vol2I.N10.8 Providing and fixing granite stone slab with table rubbed, edges rounded and polished, of size 75x50 cm deep and 1.8 cm thick, fixed in urinal partitions by cutting a chase of appropriate width with c... 5.10 Sqm

•

P-104Vol2It- 12.54 Providing & fixing factory made PVC Door of size 50x47mm with a wall thickness of 5mm, made out of extruded 5mm rigid PVC foam sheet metered cut at corners & jointed 2 No.s of 150mm long brackets of 1... 10.50 m

•

P-104Vol2It- 12.55.1 Providing & fixing 30mm thick factory made rigid foam Prelam Panelled Door Shutters made from M.S. tube of 19x19mm, 19 gauge for stiles and 15x15mm for top & bottom rails, covered with heat moulded Pr... 2.30 Sqm

•

P-111Vol2It- 12.93.2 Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid door/window/Clerestory windows & other Frames/ Chowkhat comprising of virgin PVC polymer of K value 58-60 (Suspensi... 54.00 m

•

P-112Vol2It- 12.94.1 Providing and fixing factory made Green certified, Anti Termite, UV resistant, high water absorbant single extruded WPC (Wood PolymerComposite) solid plain flush door shutter of required size comprisi... 17.10 Sqm

•

SR23-24-P105 Vol2It- 12.60 Providing and fixing chromium plated brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc., complete as per specification and dir... 4.00 No

•

SR23-24-P-105 Vol2It-12.62 Providing and fixing chromium plated brass handles of 100/125 mm with necessary screws etc. etc., complete as per specification and directions of the Engineer-in-charge of the work. 8.00 No

•

SR23-24-P-106 Vol2It-12.71.1 Providing M.S. Piano hinges ISI marked IS : 3818 finished with nickel plating and fixing with necessary screws etc., complete. Nickel plated mild steel piano hinges 1 mm thick 35 mm wide etc., complet... 24.00 No

•

SR 23-24-P-107 Vol2It- 12.76.3 Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete : 150x10mm complete as per specification and directions of the Engineer-in-charge of the work... 8.00 Each

•

SR23-24-P-107 Vol2It- 22.15.3 Providing and fixing stainless steel Fixtures conforming to 304 graded steel as per direction of engineer in charge SS Aldrop 16mm dia, 200mm etc., complete as per specification and directions of the ... 4.00 Each

•

P-25Vol2It- 7.31 Providing and fixing in position 12mm thick plaster of paris (Gypsum anhydrous) for ceiling reinforced with hessian cloth flat surface with ceiling tiles up to a height of 5 m above floor level over a... 9.35 Sqm

•

SR2023-24-P-50Vol2It- 8.53.2 Wall painting with acrylic emulsion paint, having VOC (Volatile Organic Compound) content less than 50 g/L, of approved brand and manufacture, including applying additional coats wherever required, to... 154.54 Sqm

•

SR23-24Vol2P n109I.No 12.85 Providing & fixing of louvered ventilator made out of multi chambered UPVC(Matching to RAL9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR withTPE(Thermo Plastic Elastomer) and lead Fina... 2.88 Sqm

•

SR23-24-P-221 Vol2It- 22.49 Providing & fixing upvc ventilator with Exhaust Turbo speed fan with 5 blades (300mm x 300 mm & above sized fan) with copper motor having mounting arrangements as per direction of Engineer in charge o... 4.00 No

•

SR23-24-P-50 Vol2It- 8.54.2 Wall painting with premium acrylic emulsion paint of interior grade,having VOC (Volatile Organic Compound ) content less than 50 g/L of approved brand and manufacture, including applying additional co... 1789.06 Sqm

•

SR23-24 Vol.2P.N191I N19.44.1 Dismantling C.I. pipes including excavation and refilling trenches after taking out the pipes, manually/ by mechanical means breaking lead caulked joints, melting of lead and making into blocks includ... 10.00 m

•

SR 2023-24 Vol.2P.NO 191I.N 19.43.1 Dismantling G.I. pipes (external work) including excavation and refilling trenches after taking out the pipes, manually/ by mechanical means including stacking of pipes to the appropriate disposal are... 15.00 m

•

SR 2023-24 Vol.2, P NO 209 I NO 20.123) Removing of existing old or broken wash basin / urinals/ Indian Water closet/ European Water closet and disposing it with all cost and conveyance labour for all items of work, HOM with all lead and li... 6.00 Each

•

23-24SR P.n.206.Vol2 I N.20.89 Repairs to plaster in patches of 2.5 m2 and less in walls, ceilings 10 to 20mm thick in cement mortar 1:4 including cutting the patches in proper shape and replastering the surface of the wall includi... 6.41 Sqm

•

SR23-24-P-157 Vol2It- 15.28 Toilets Tile Joints (Repair) Providing and grouting tile joints, Cutting the tile joints with the help of cutting machine (width 3mm-15mm) and filling with of matching shade, using three component Epo... 110.30 Sqm

•

P-131sr23-24 Vol2It- 14.3.1 Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. ... 3.00 Each

•

P-121Vol2It- 13.30 Providing & fixing chrome plated brass battery based infrared sensor operated pillar cock, having foam flow technology. etc., complete as per specification and directions of the Engineer-in-charge of ... 4.00 No

•

P-139Vol2It- 14.54a Providing and fixing Angle cock with wall flange made of Stainless steel with all concealed fitting arrangements & all necessary accessories complete -Class Premium etc., complete as per specificatio... 7.00 No

•

P-144Vol2It- 14.87b Providing and fixing Towel rail (Rectangular) made of Stainless steel with all concealed fitting arrangements & all necessary accesories complete - Class Premium etc., complete as per specification an... 5.00 No

•

SR23-24V2P.N88 I.N 11.35.2.1 Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate sections and other sections of approved make conforming... 774.00 Kg

•

23-24SR P.n89.V2I.N11.37.1 Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions o... 58.50 Sqm

•

23-24SR P.n89. Vol2I.N11.36.1 Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823Grade l Type ll, in panelling fixed in aluminum doors, window... 7.65 Sqm

•

23-24 SR P.n.89Vol2 I. No.11.37.2 Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of... 7.65 Sqm

•

SR23-24 P.No.120v2& I.N13.20b Providing and fixing PTMT Swan neck cock of approved quality and colour etc., complete as per specification and directions of the Engineer-in-charge of the work. 1.00 No

•

SR23-24P.N120v2& I.N14.10.1.1 Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making go... 1.00 Each

•

SR 23-24 P.N69 v2&I.N 10.1.2 Providing and fixing 18 mm thick gang saw cut granite of any color and shade, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and ... 2.51 Sqm

•

SR 23-24P.N69v2& I.N10.2 Providing edge moulding to 18mm thick Granite stone counters, vanities etc including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-charge. 6.95 m

•

SR23-24 P.N120vol2& I.N10.4 Extra for providing opening of required size & shape for wash basin/ kitchen sink in kitchen platform, vanity counter and similar location in Granite, including necessary holes for pillar taps etc. in... 1.00 Each

•

SR23-24 P.N120vol2& I.N22.13 Providing and fixing ready made 304 grade stainless steel Modular kitchen basket and accessories such as right angle basket (Plain Cup & Saucer, plant, Partition, Bottle rack, Thali, Cutlery) kitchen ... 1.00 Piece

•

SR 23-24 P.N217vol2& I.N22.4 Providing and supplying Kitchen cabinet with 19mm thick one side Architect recommended decorative Acrylic Glossy or Matt finished laminate (1.5mm thick) and other side balancing lamination(preferably ... 42.50 Sqm

•

SR23-24 P.N218vol2& I.N22.8 Labour & installation charges for BWP ply:BWR ply:HDHMR: MDF & Particle board work of any thickness applicable for all types of work etc., complete as per specification and directions of the Engineer-... 42.50 Sqm

•

P-218Vol2It- 22.9c Providing and fixing stainless steel 304 grade fancy handle of approved make fixed with SS screws etc. complete as per direction of Engineer-incharge. 100 mm length etc., complete as per specificatio... 14.00 No

•

P-218Vol2It- 22.10 Providing and fixing Stainless Steel 304 grade soft closing spring hinges at 0 degree hinges (hydraulic type) of approved make/brand to cupboard shutters with full threaded steel screws including maki... 24.00 No

•

P-218Vol2It- 22.11 Providing and fixing stainless steel soft closing heavy type telescopic drawer channels of approved make 500 mm long with screws etc. complete as per directions of Engineer- in-charge. 7.00 No

•

SR23-24 P.N69 vol2&I.No 22.14 Providing and fixing 2mm thick 16 to 19mm wide pvC edge binding tape of approved quality for cupboard/wardrobe/kitchen shutters including necessary synthetic resin hot pressed to edges on binding mach... 100.00 m

•

EleSR23-24 p-59.105vol6& I.N14.4.4 Design, supplying, erecting testing and commissioning of - Passenger/ Bed-cum-passenger hospital lift with speed of 1mtr per second, variable voltage variable frequency drive, with or without machine ... 1.00 Job

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

NIT Documents

Notification 20.docx

Instructions to Tenderers • 0.08 MB

KW 2 bid document 4270.docx

Tender Document • 0.84 MB

Ready to Participate?

Download all tender documents and submit your bid

Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .

Loading…

Company

HARSHAKUMAR B M

₹32.6 Laccepted-aoc