C-8828/E8

Amount

Taking down cement plaster including racking out joints, hacking for key & scrubbing down with water etc complete all as specified and directed

Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises etc complete all as specified and directed.

Dismantling timber scantling 40 Sqcm and over in section in any position etc complete all as specified and directed.

Demolition of cement (un-reinforced) concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed

Demolition of brick work or stone/ boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars etc but excluding ashlar facing dressed stone work and precast concrete articles complete all as specified and directed

Taking down chowkats or frames not exceeding 1.5 Sqm each with shutter (without taking off shutter from the frame) Removing to or from Store complete all as specified and directed

Taking down chowkats or frames exceeding 1.5 Sqm but not exceeding 4 Sqm each with shutter (without taking off shutter from the frame) Removing to or from Store complete all as specified and directed

Taking down shutter of any description exc. 1 sqm but n.exc 2 sqm each and removing from site complete all as specified and directed

Taking down shutters of any description n exc 1 sq. m each complete all as specified and as directed

Dismantling of 100mm bore cast iron /PVC drain pipe alongwith fittings and accessories jointed in cement mortar and taking out from walls, floors or from trenches, if required complete all as specified and directed.

Dismantling of 75mm bore cast iron /PVC drain pipe alongwith fittings and accessories jointed in cement mortar and taking out from walls, floors or from trenches, if required complete all as specified and directed .

Taking up or down15 mm steel tubing and connections including cleaning for refixing or removal complete all as specified and directed by Engr-in-Charge

Taking up or down20 mm steel tubing and connections including cleaning for refixing or removal complete all as specified and directed by Engr-in-Charge

Dismantling structural steel work including doors , gates but excluding framed truss etc complete all as specified and directed..

Dismantling water tank and removing to store exc 250 ltr but n exc 500 ltrs etc complete all as specified and directed.

Dismantling water tank and removing to store exc 500 ltr but n exc 1000 ltrs etc complete all as specified and directed..

Dismantling Plain or corrugated steel sheeting,any gauge, thickness, including Nainital or similar pattern roof coverings etc complete all as specified and directed..

Dismantling AC Sheet in roof covering etc complete all as specified and directed

Dismantling of wall and ceiling boards/ fibre, pulp, insulation etc or insulation boards/ slabs/blankets any thickness incl cover fillets etc complete all as specified and directed..

M&L for 2nd class hard wood framed and fixed scantling wrought complete all as specified and directed etc complete all as specified and directed..

M & L for providing cement concrete 1:2:4 Type B0 using 12.5mm graded aggregate as in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth, string, lacing courses, parapets and railings upto 60cm in height, copings, kneelers, apex stones, bed plates, water troughs and the like including weathering, slightly rounded or chamfered angles and throating complete all as specified and as directed

S&F Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering, doors etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings and fastening and fixing complete FE 290 Gde E-165 etc complete all as specified and directed..

S&F 35mm thick factory made glazed and skeleton door shutters open rebated of second class hard wood rail and styles(Hollock), prepared to receive glass/gauge etc without sash bars, edges of framing plain chamfered or rounded, fitted with cut and mitred beads for securing glass/gauge etc. The size of rails & style as specified in SSR Part-I (2009) section 8 and as per IS-1003(Part-I) kiln seasoned as per IS-1141 and chemically pressure treated as per IS-401 complete all as specified and directed by Engineer-in-Charge. (Note :- S & F Glass/gauge shall be measured and paid for separately)

S&F 35mm thick factory made Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed .

S & F 25mm thick, flush shutters, factory made,solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and as directed by the Engineer-in-Charge

M&L for 32mm thick factory made glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc (without shah bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc; sizes of members of shutters as specified in SSR Part - I, Sec 8,clause 8.24 (b); supplied and fitted to chowkats,II nd class hardwood as specified and directed.

S&F Steel windows with pressed steel frame (dimension- 95X45X1.25 mm ),side hung shutters including box type hinges with steel handle, and steel peg stay, complete with Glazed openable shutterg with glazing bars( out side shutters) and wire gauged openable shutter without glazzing bars ( inside shutters ),dovetailed or welded complete all as specified and directed all as per Drg NO- TD/088 dt 07 Jan 2002 complete all as specified and directed...

S&F Framed work such as grills,gratings, etc.. with ends of bars shouldered and/or riveted,or forged into spikes; framed guard bars; barred iron doors;ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165 etc complete all as specified and directed..

S & F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S Square tube, suppling & fixing in opening as per specification & drawing

S&F Factory made solid panel pvc door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded palin colour PVC `C' channel heaving a PVC sheert strip of 20mm width suck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bbottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S frame wedded/ sealed to the stiles, & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing.

M/L for repairing to existing aluminium doors of any size by straightening of frame / shutter, replacing the detoriated member with new, replacing the broken / non funcional hinges with new, replacing decayed rubber gasket with new, replacing the broken glass pane of any size with new 5.00mm thick tinted glass, replacing unserviceable handle, tower bolt, lock, floor spring, foundation box with governing pivot, top pivot, peg stay etc with new and including taking down and at same place after making the door / window smooth functional complete all as specified and directed.

S & F 200 mm long Aluminium, anodised, barrel tower bolts of extruded section and fixed etc complete all as specified and directed..

S & F 300 mm long Aluminium, anodised, barrel tower bolts of extruded section and fixed etc complete all as specified and directed.

S&F Alum handles,cast type,anodised 150mm size etc complete all as specified and directed..

S&F 150mm size Extruded brass handles, fabricated type polished completed all as specified and directed.

S&F 100 mm size butt hinges medium weight colled rolled mild steel complete all as specified and directed by Engineer-in-Charge.

S & F butt hinges 75mm, medium weight, cold rolled mild steel complete all as specified and as directed by the Engineer-in-Charge

S&F in repair 375mm, ordinary rat tail rod patttern springs includding roller and roller platewith fixed to stone/pressed steel frame chowkats with flat iron 40x3mm size 75 cm long with necessary bolts, etc. complete all as specified and directed..

S&F 300 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or castaluminium alloy and fixed complete all as specified and directed by Engineer-in-Charge.

S&F 100mm but hinges,extruded aluminium alloy with galvanised mild steel hinge pin, anodised type C-21 etc complete all as specified and directed..

Hacking out old, broken glass (any thickness,) size quality or description) from metal frames incl.punching or drilling out old glazing pins/spring clips and fixing new ones incl M&L for 3mm thick sheet glass ordinary quality and glazing with oil putty in squares not exc. 0.5 Sqm in each pane complete all specified and as directed.

S&F 0.63mm plain, galvanised, mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275 etc complete all as specified and directed..

M&L for 0.71mm thick Aluminium plain sheeting Alloy 31000 H4, STUCCO Embossed finish with fixed with coach screw and Aluminium washer in roof and wall etc. with end laps stitched with 25x6mm G.I. bolts at 20cm apart etc complete all as specified and directed..

S&F 6mm thick asbestos cement, corrugated or semi-corrugated shets in roofs, walls, etc complete all as specified and directed..

S&F asbestos cement onepiece plain angular ridge 6mm thick Fixed with L-type or J-type or cranked hook bolts etc complete all as specified and directed..

S&F Pre- painted galvalume aluminum zinc coating curved/ straight GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering /cladding to wall, fixed with self tapping screws as etc complete all as specified and directed..

S&F MS Steel work in tubuler trusses,rafter purlins including special washer etc complete all as specified and directed

M&L for E-board false ceiling consisting of powder coated GI wall angle, main T and cross T of 25mmX 25 mm X 1.40 mm thick grid frame work, joist, angle/ Tee as directed and mild steel wire hook not less than 6 mm dia with arrangement for adjusting height of ceiling and including provn of 4 mm thick E- Classic board in pannelof size 600X600mm with necessary off cut including dismantling of existing false ceiling and taking down and refixing of Electric fitting carefully complete all as specified and directed.

M&L for prelaminated gypboard false ceiling which included 12 mm thick gypboard (confirming to IS:2095-1982)screw fixed to the ceiling section (0.55mm thick having aknurled web of 51.50mm and two equal flanges of 26mm each with lips of 10.5 mm made of G .I. steel) placed at 610mm centres in perimeter channel (0.55mm thick having one flange of 20 mm and another flange of 30 mm and web of 27 mm made of G.I.steel) fixed to the floor and ceiling with nylon sleeves &wood screws at 610mm c/c. Finally the boards are to be jointed &finished so as to have aflush look which included filling &finishing with jointing compound . joint paper tape and two coats of Drywall top coat suitable for gypboard (as per recommended practices of India gypsum.and taking down and refixing of Electric fitting carefully complete all as specified and directed.

S&F in repair for solid PVC interlocking wall panelling( any design approved by Accepting Officer) for luxury performance tiles fixed with adhesive on suitable frame, using 65 mm long ms screws with PVC fasterners for levelling on wall . The distance between two frame shall not be more than 200 mm. The size of wall panelling shall depending on size of wall as per site complete all as spd and directed. Make :- Action tessa,Pergo,Welpsun or equivalent appoved by GE

S&F in repair PVC hollow interlocking wall paneling of 5mm thick prelam PVC sheet. The panel & strips shall be of 600 kg / cbm density manufactured by an ISO-9000 certified company. The strips should two PVC strips. The PVC strip shall be fixed to the wall using 65mm long M.S screws through the groove in the strip by using PVC fasteners. The distance between two screws shall not be more than 200mm. The exact size of the panel and correspondingly of the grid may vary depending on the size of the wall. Optionally a strips of 5mm thick PVC sheet of width 75mm feathered at the edges shall be stuck at the places where two panels are joined, using solvent cement.

S&F 12 mm thick tougned glass door with powder coated aluminium frame including neccessary locking ,handle etc with double action floor spring in each shutter complete as requirement of site with suitable height and any type of eaching designed on tougned glass , off cuts complete with finishing wall in CM 1:4 , designed approved by Engr-in Charge

S&F aluminium alloy powder coated aluminium door frame fixed with side hung shutters and glazing fixed with and including 5.50mm thick tinted glass fixed with rubber gasket with aluminium heading, clips frame made with aluminium box sec as appended below complete all as specified and directed (a) Frame 100x44x1.48mm thick with rawl plug (b) Middle and lock rail : 150x44x1.48mm thick (c) Bottom rail : 150x44x1.48mm thick (d) Top rail/style : 85x44x1.48mm thick (e) Aluminium beading : 0.7mm thick (f) Aluminium handle D type 150mm long, aluminium tower bolt 9.9mm dia shoot 200mm long brass mortise lock 100mm 4 leaver aluminium stopper, cleat double action floor spring hydraulically regulated made of n.less than 1.25mm thick aluminium alloy sheet foundation box main body with stainless steel cover governing pivot made of brass other part of steel heavy duty ( Make Sandhu ISI marked or its equivalent approved make) (g) Making good of wall surface to match with existing surface complete.

S&F sliding windows of aluminium alloy powder coated, window and frame with movable shutter ( sliding on minimum two PVC roller of best quality, for each shutter ) on tracks ( Two tracks with mosquito proofing) and glazzing with and including 5.00 mm thick tinted glass fixed with neoprene rubber gasket with aluminium beading, clips,frame made with aluminium section as appended below- (i) Window frame :63x35mm X 1.48 mm thick for two tracks. (ii) Top/bottom rail and style / rail of shutter : 19x38x1.48mm thick and over.(iii) Aluminium beading - 0.7mm thick (IV)Aluminium wire cloth0.45mm nominal dia of wire and average width of aperature 1.40mm and fixed in aluminium window or alongwith F/Y section fixed with aluminium wire staples complete. (iv) Aluminium fittings such as peg stay, aluminium hinges, aluminium handle 100mm long , aluminium tower bolt 100mm long (v) Making good of wall surfaces to match with existing surfaces complete all as specified and directed.

S & F partition wall of powder coated aluminium hollow sections members of size 63.50 mm x38mmx 1.48 mm thick with distance of vertical hollow section 1.2M to 1.8 M and 1.2 mtr height wall having top rails ,bottom rails and middle rail of size 63.50 mm x38mm x 1.48 mm and upto middle rail wall panels shall be covered by 12mm thick prelaminated particle board ,interior grade both sides with decorative choice laminations , fixed into the wall with aluminium clip and bolt, top hight of middle rail shall be 1 meter from floor and portion above middle rail shall beprovided with figured glass 5 MM thick fixed with aluminium stiprs/beadings with rubber gasket, sketch plan of wall as per existing or as provided by the Engineer-in-Charge compelte all as specified and directed

M & L powder coated aluminum window/ doors grills fixing along with frame of following specification, grills with opening 69.4mm X 78.2mm grills thickness shall be of 6.4mm X 5.8mm having weight not less than 2.306 Kg/per sqm shape as ordered with frame channel of 34 X 11mm X1.7mm thick fixed with screw inside of the window all as directed by Engr-in-Charge and all as specified and as directed.

S&F stainless steel wire cloth, 0.56 mm nominal dia of wire and average with of aperture 1.18 mm and fixed with stainless steel wire staples complete all as specified and directed by Engineer-in-Charge.

M&L in repair galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of apeture1.18 mm and fixed with tinned tacks, or galvanised wire staples all as specified and directed.

S&F in repair Venetian blind colouredstrip 75 mm top 5 mm thick powder coated aluminium rod rod ends at brackets are moulded type etc complete all as directed.

S& F in repair door closer hydraulically regulated Aluminium (extruded section body), designation No 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80kg and fixed etc complete all as specified and directed..

S&F for fancy type floor door stopper of CP brass body and tongue with hard drawn steel spring, with hard drawn steel spring. Fixed in door etc complete all as specified and directed..

S&F in repair 20 mm dia fancy Chromium plated curtain rod with necessary bracket including all neccessaly fittings fitted complete all as specified and directed.

M & L for WPT in sunken floors as described here under:- Sunken floor and sides up to finished floor level shall be plastered with 15 mm thick cement plaster in CM 1:4 mixed with water proofing liquid @ 150 ml per bag of cement . (ii) Preparing plastered surfaces and providing APP polymeric water proofing membrane , minimum 3 mm thick and weighing above 3.0 kg/ sqm of make super thermolay manufactured by M/S IWL Ltd as approved by GE, black finish reinforced with non-woven polyster matt, with a thermo fusable finish laid over compatible bitumen primer (Bitumen primer shall be TANK MASTIC of M/S Texas India Ltd) at the rate of 0.40 Ltr/Sqm torching overlaps with a propane or a butane gas torch , with a over lap of 75mm at the sides and 100mm at the ends sealing including applying a coat of cold emulsion bituminous primer all as per manufacturer's instructions including preparation of surface by removing the existing treatment, complete all as specified an as directed Note :- (i) Polymeric membrane shall be laid in sunken floor and on sides up to finished floor level. (ii) The waterproofing treatment shall be got carried out by the manufacturer or their authorised applicators. (iii) Above aspects are deemed to be included in quoted rate. (iv) Supply only water proofing liquid shall be measured and paid seperately complete al as spd as directed

M&L PCC 1:5:10 type E-2 as sunken sub base of floor fillings with broken brick agg .

supply Integral water proofing Liquid of Dr fixit/sika/Fosroc etc complete all as specified and directed..

S&F 32mm dia GI pipe, medium grade as in spout pipe in sunken floor complete all as specified and directed.

M&L 15mm thick rendering in cement mortar 1:4 to brick masonry wall surfaces or on other than fair faces of brick wall surfaces finished fair & even without using extra cement for fixing tiles etc complete all as specified and directed by Engineer - in - Charge.

M & L 25 mm thick PCC 1:2:4 type B-1, using 20 mm graded stone aggregate as in floors, surfaces finished fair and even complete all as specified and directed.

M&L 100mm thick cement concrete type B-2 1:2:4 (40mm graded aggregate) as in pavement , floors including all as specified and directed

M&L screed bed or bedding layer of mortar, 15 mm thick, in cement mortar 1:6, for laying floor finishes/tiles complete all as specified and directed.

M&L screed bed or bedding layer of mortar, 20 mm thick, in cement mortar 1:6, for laying floor finishes/tiles complete all as specified and directed.

M&L glazed ceramic coloured tiles in vertical surfaces 300x200x7 mm thick set and pointed in neat cement slurry and pointed in white or colour cement to match

M&L Glazed coloured / designed digital tiles in verticle surface each tiles exc 0.11 sqm but not exceeding 0.16 Sqm on vertical surfaces etc set and jointed in neat cement slurry and pointed in coloured cement to match with coloured tiles complete all as specified and directed by Engineer-in-Charge..

M&L Non- skid coloured ceramic tiles 7 to 8mm thick (square / rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile complete all as specified and directed.

M&L for glazed Vitrified Ceramic Dark shade/ Double charged / ultra charged tiles 10 mm thick square/ rectangular) polished area of each tile exceeding 0..6 sqm but not exceeding 1.00 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cemeent to match etc complete all as specified and directed..

M&L for glazed Vitrified Ceramic Dark shade/ Double charged / ultra charged tiles 10 mm thick square/ rectangular) polished area of each tile exceeding 0..6 sqm but not exceeding 1.00 sqm on vertical surfaces etc. set and jointed in neat cement slurry and pointed in white or coloured cemeent to match etc complete all as specified and directed..

M&L for vitrified light shade tiles 10 mm thick (Square/rectangular) polished area of each tile not exceeding 0.36 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match etc complete all as specified and directed..

M&L for vitrified light shade tiles 10 mm thick (Square/rectangular) polished area of each tile not exceeding 0.36 sqm on vertical surfaces etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match etc complete all as specified and directed..

M&L for rubber moulded chequred concrete type 22 to 25 mm thick set and joint neat cement slurry pointed with cement pigment match the set over 20mm thick in CM 1:6 screed bed complete all as specified and directed.

M & L 15-16 mm thick Italian marble/ composite marble in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of marble dust with admixture of pigment to match with shade complete all as specified and directed

M & L for 15-16mm thick italian marble/ composite marble on vertical surface 12mm thick in cement mortar (1:3) and pointing with white cement (1:2) using marble dust with admixture of pgiment to match with shade of granite with notching complete all as specified and directed

M &L 100 mm thick PCC (1 :3:6) type D2 using 40mm agg as in sub base complete all as spd and directed

M&L Sand filling under floors or in foundations including watering and consolidation .

M&L for Machine pressed coloured glazed cement concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 100 mm thickness M-50 grade with gray cement and pigment complete all as specified and directed.

M&L for precast (factory casted) cement Concrete kerb stone casted in PCC (1:2:4) type B-1 using 20mm graded stone aggregate with plain or interlocking joints (as directed), making groove in ground of desired dimension, placing in erect position Kerb stone in edging and set and jointed in cement mortar 1:4, making good distrubed surface of ground complete all as specified and directed .

M&L for PCC (1:2:4) type B-1 using 20 mm graded stone aggregate as in floor complete all as specified and directed .

M&L for brick work with fly ash bricks, straight or curved on plan exc. 6 m mean radius, built in CM (1:6).complete all as spd

M&L rendering 15 mm thick in CM 1:6 on brick masonry surfaces or on other than fair faces of brick masonry finished even and smooth witout using extra cement complete all as specified and directed.

M&L 15mm thick rendering in cement mortar 1:4 to brick masonry wall surfaces or on other than fair faces of brick masonary finished even and smooth without using extra cement complete all as specified and directed.

M& L for rendering 12mm thick cement plaster in CM 1:6 on fair face of brick work or concrete surfaces in narrow width , shaft portion ect with using WPC @ 2% by weight of cement finished even and smooth with out using extra cement ( WPC will be measured and paid separately ).

M/L rendering 10 mm thick in CM 1:3 on surfaces of fair face of brick work or concrete surfaces with using WPC @ 2% by weight of cement finished even and smooth with out using extra cement ( WPC will be measured and paid separately ).

Supply only water proofing compound.

M & L for 75mm thick PCC 1:3:6 , type C-2 using 40 mm graded stone aggregate as in plinth protection laid in slope in 1:30 in alternative bays not exceeding 3 mtr in length. Exposed surfaces finished even and smooth without using extra cement including raking out joints between panel to panel and panel to wall and plugging the same with bitumen mastic using bitumen and sand mixture in 1:3 complete all as specified and directed .

S&F 500 litres, rotational moulded polyethylene water storage tank (Cylindrical vertical with closed top), hoisted and fixed in position complete all as specified and directed by Engineer-in-Charge. (Note : PVC tanks shall be ISI marked and having two layers)

S&F 1000 litres, rotational moulded polyethylene water storage tank (Cylindrical vertical with closed top), hoisted and fixed in position complete all as specified and directed by Engineer-in-Charge. (Note : PVC tanks shall be ISI marked and having two layers)

S&F 20mm bore ball brass valve high pressure with polythene float and fly nut complete, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed by Engineer-in-Charge.

S&F in repairs ceramic senso sensor ivory colour urinal SKU code : Hindware 60018-ivory , product code GIH_P-57421 complete set fittings all as specified as directed.

S&F in repairs Curved shaped urinal partition with frosted glass model No : IARA 1810 UC , size 900x450 mm complete all as specified as directed .Make: Jaquar or equivalent approved make

S&F in repairs chromium plated brass tubular towel rail 20 mm dia complete all as specified and directed.

S&F15 mm dia steel water tubing, galvanized, medium grade, with all fittings, fixed to walls and ceiling or in floor complete all as specified and directed by Engineer-in-Charge

S&F 20 mm dia steel water tubing, galvanized, medium grade, with all fittings, fixed to walls and ceiling or in floor complete all as specified and directed by Engineer-in-Charge

S&F 15mm bore PVC connections, with PTMT nuts of length 450mm complete all as specified and directed.

S&F in repair 15 mm dia stop cock fancy type, chromium plated with long shank and cup (conncelaed type)for iron pipe or for unions and fixed.

S&F in repair 20mm bore CP stop valve fancy type for union complete all as specified and directed.

S&F in repair bib taps 15mm bore fancy type CP for iron pipe or for union complete all as specified and directed.

S&Fin repair pillar taps (fancy type), of 15 mm dia, cast copper alloy, with capstan heads, with chromium plated, screwed down high pressure with or without lettered 'hot' or cold with long screwed shanks and fly nuts, screwed for iron pipe and fixed.

S & F in repair viteous china squating pan " ORISSA PATTERN" of size 580mm x 440mm white with integral foot rest or back inlet incl PCC 1:2:4 type B-1 for making good the floor complete all as specified

S&F in repairs Vitreous China urinal bowl type flat back or angle back type, size( 465x355x265m) complete including providing and fixing plugs,waste pipe 32mm dia ,bedding urinal against wall in cement mortar 1: 2, screwing urinal to plugs with and including 60 mm long brass screws pointing around urinal back in cement mortar complete all as specified.

S&Fin repair vitrous china wash down water closet pan (padestal pattern), white including connection to drain or out going pipe and to flushing pipe, antisyphonage pipe etcplastic water seat white/black pattern flat bottom and cover and mild stel chroumium plated. complete all as specified.

S&F in repairs, PVC low level cistern 10 litres capacity, valve less, symphonic action type with float, handle including 32mm dia PVC flush pipe of polyethylene of low or high density & bracket etc complete all as specified and directed .

S&F in repair 15 mm dia florentine queen angular CP Stop Cock with Wall Flange and fixed. Complete all as spd as directed Make: Jaquar or equivalent

Supply and fixing in repair for ISI marked florentine CP Pillar Tap Swan neck of 15mm bore dia,fixed with iron pipe `complete all as specified and as directed Make : Jaguar or equivalent

S&F in Vitreous China counter top Oval type coloured wash basin suitable size make : Jaguar or equivalent including swan neck fancy type 15 mm dia CP pillar taps with bottle trap,fixing on counter top complete all as specified

S&F in repairs, vitreous China wash hand basin, white, flat back size 550 x 400mm including 15mm dia, 450 mm long HDPE PVC connection, 750 mm long 32mm bore HDPE waste down pipe including CI brackets all s directed.

S & F in repair for 15 mm bore Bib Cock florentine queen QQT-CHR-7037 chromium plated, complete all as specified and as directed . Make Jaguar or equivalent

S & F in repair for florentine CP angle cock suitable with wall flange fancy type (Bore dia of pipe in 15mm) fixed in repairs. Make Jaguar or equivalent

S&F in repair chromium plated brass Plantex New Look Stainless Steel 304 Grade Dual Folding Towel Rack for Bathroom/Towel Stand/Hanger/Bathroom Accessories (24 Inch-Chrome) complete all as specified and directed. Make : Jaquar or equivalent

S&F in repairs JAQUAR Wall Mixer 3 in 1 System - Florentine (FLR 5281) , 15mm for mixing hot & cold water screwd down three joints to steel pipes or unions and plugging and screwed to walls complete all as specified and directed Make Jaguar or equivalent

S&F brass chromium plated health faucet Jaquar Brass Health Faucet with Long Cp Flexible Tube (Chrome Finish, 15 mm) complete all as specified and directed Make : Jaguar or equivalent

S&F Jet spray CP Brass with 1.5m tube complete all as specified and directed.Make : Jaquar or equivalent

S & F in repairs Rimless Single piece-WC with UF soft close seat cover, Hinges, Fixing Accessories, Accessories Set and Cistern fittings,Size: 360x675x750 mm, S Trap-300 mm make Jaguar or equivalent including making good to floor complete all as specified and directed.

S&F in repair PVC (SWR) 75 mm bore pipes single socketed in any length with rubber ring joints fixed to wall complete all as specified and directed.

S&F in repair PVC (SWR) 110mm bore pipes single socketed in any length with rubber ring joints fixed to wall complete all as specified and directed.

S&F PVC (SWR) 110mm bore bends any radius complete all as specified and directed.

S&F PVC (SWR) 75mm bore bends any radius complete all as specified and directed.

S&F in repairs automatic sensor of Urinals incl change of parts complete all as specified and directed .

S&F chromium plated brass tubular towel rail 20 mm dia, D type for wash hand basin centre holed fixed to iron pipe complete all as specified and directed.

Supply only 'P' or 'S' trap of 100mm bore complete

All as per item no 124 above but with access door bends.

All as per item no 125 above but with access door bends.

Supply and fixed in repair for ISI marked 125mm dia shower rose brass chromium plated, including fixing to steel pipe or union ` complete all as specified and as directed by the Engineer-in-Charge.

S&F in repairs stainless steel sink made out of 1.0mm thick sheet or kitchen or laboratory with plug washer pipe, cast iron cantilever brackets connecting union over all size 495x460mm with bowl 410mm x 330mm x 160mm etc complete all as specified and directed.

S & F brass chromium plated stop valve (concealed type) fancy type (Bore dia of pipe in 15mm) fixed in repairs with long shank and cup etc complete all as specified and directed..

S&F in repairs for 75mm bore dia PVC ( SWR ) floor trap, with grating including jointing to waste pipe with solvent fixed in cement concrete 1:2:4 type B1 complete all as specified and as directed by the Engineer-in-Charge

S & F in repairs Toilet paper holder of brass chromium plated fixed to walls with chromium plated, brass screws complete all as specified and directed

S&F in repairs 300 mm corner glass shelf with CP outer railing complete all as specified and directed

M & L for cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, Chajja ( up to IInd floor) etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting exc 10cm and not exc 20cm girth in brick walls complete all as specified and as directed.

M&L for complete removal of existing treatment on walls, chajjas etc including cleaning of any mortar drops, fungus efflorescent salts etc and preparation of old plastered surfaces and applying two coats of distemper with distemper oil emulsion and including one coat of 1mm thick double layer wall care putty complete all as specified and directed.

Preparation of new & undecorated surface and three coat of white wash complete all as specified and directed.

M&L for preparation of old treated surface & applying Two coat white wash on surfacea of ceiling complete.

M&L for Two coat of white washing on old decorated surface of wall incl preparing plastered surface complete all as specified and directed.

Preparation of old decorated surface and applying one coat of cement base paint on wall surface over one coat of primer etc complete all as specified and directed..

M&L two coats of synthetic enamel paint over a coat of pink primer on wooden surfaces of any description not otherwise described over 10cm width or girth including preparation of new surfaces complete all as specified and directed

M&L preparation new or previously untreated steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over and including one coat of red oxide zinc chrome primer complete all as specified and directed by Engineer-in-Charge.

M&L for preparation of new plastered surfaces and applying two coats of oil emulsion distemper over and including one coat of 1mm thick double coat wall care putty complete all as specified and directed.

M&L for preparation of new plastered surface of ceiling and applying three coats of white wash complete all as specified and directed.

M&L for preparation of new plastered surface of wall and applying two coat of cement base paint over and including a coat of cement primer complete all as specified and directed

Taking down copper/aluminum point wiring (Light fan, socket or power) complete including fixture and fitting such as switches, ceiling roses, pendants, regulators, sockets, light fitting holders etc, removing materials for taking credit (credit for above items should be made as per conditions separately ) and making good disturbed surfaces of wall, floors etc.

Taking down ceiling/exhaust fan and disconnecting, removing to store for keeping in safe custody in MES store.

Taking down Electic water storage heater 25 Ltr Capacity complete including water connection , electric connection & removing from mounting etc to store for keeping in safe custody in MES stores.

Taking down Light fittings removing to store for taking credit.

Taking down main switch / MCB/ DBS including MC BS etc of any size removing for taking credit (credit for above items should be made as per conditions separately ) and making good disturbed surfaces of wall, floors etc.

M & L for point wiring with 1.5 sqmm cable PVC unsheathed and insulated copper multistranded conductor FRLS 1100 Volts grade cable ( red colour cable to be used for live connection and black colour cable to be used for neutral connection ) controlled by one way switch drown through and including PVC concealed conduit with all accessories including 1.0 sqmm copper multistrand conductor FRLS 1100 Volts grade unsheathed PVC insulated ( green colour ) continuity earth wire connected to common earth dolly and sunk cast pressed steel terminal box made out of MS sheet 1.25 mm thick for mounting of fittings like switch , socket and fan regulator with 3 mm thick hylum laminated sheet cover incl cutting Chases pinning in, for concealed conduit wiring and making goods of disturbed surface not exc 15 cm girth complete all as specified and as directed following for :- One light point controlled by one switch

All as per item no 155above but One fan/exhaust fan point controlled by one switch

All as per item no 155 above but One 3 ;pin socket oultel 5 Amp on the same board with other switch

All as per item no 155 above but One 3 pin socket outlet 5 Amp independent

All as per item no;155 herein before but 4 Sqmm PVC insulated sheathed cable and 2.5 Sqmm cable for earth wire for one 5 pin socket outlet 15 Amps

S&F switch modular single pole one way 6 Amps , one module. Against item No-6 above.

S&F in repair switch modular single pole one way 6 Amps , one module.

. S&F switch modular single pole one way 16 Amps , one module.Against item No-6 above.

S&F in repair switch modular single pole one way 16 Amps , one module.

. S&F Modular Socket, 2 /3 pin 6 Amp flush type, 2 module & against item No-6 .

S&F in repair Modular Socket, 2 /3 pin 6 Amp flush type, 2 module.

S&F Modular Socket 2 / 3 pin 6 Amp and 16 A flush type, 2 module & against item No-6 above.

S&F in repair Modular Socket 2 / 3 pin 6 Amp and 16 A flush type, 2 module.

M & L Modular white cover plate with frame 1 module & against item No-6 above.

M & L in repair Modular white cover plate with frame 1 module.

M & L Modular white cover plate with frame 3 module & against item No-6 above.

M & L in repair Modular white cover plate with frame 3 module.

M & L Modular metal flush box 1/2 module & against item No-6 above.

M & L in repair Modular metal flush box 1/2 module.

. M & L Modular metal flush box 3 module

. M & L in repair Modular metal flush box 3 module.

S&F switch 5 Amp 230 V single pole, Piano typeone way.

S&F Lamp holder, PVC/Polycarbonate type with back plate for batter fittings

S&F Switch Socket combination2 in 1, 3 pin 5 Amp flush type

S&F Switch Socket combination2 in1,3pin5Ampand15 Aflushtype

19(b). S&F in repair Lamp holder, PVC/Polycarbonate type with back plate for batter fittings

S&F Lamp LED 9 Watt 230 Volt, aluminium heat sink powder coated white with PC diffuser B-22 base cap

S&Fceiling roze3 terminalsPVC polycarbonateisolated body.

Supply & fixing ultra slim LED 1x20 Watt MS batten T8 batten white powder coated decorative end cap complete with retrofit polycarbonate glass tube LED 20Watt. complete with 4', long LED.

Supply & fixing in repair ultra slim LED 1x20 Watt MS batten T8 batten white powder coated decorative end cap complete with retrofit polycarbonate glass tube LED 20Watt. complete with 4', long LED.

S & F in repair compact flourescent lamp 36 Watt, 4 pins coplete.

S&F replacement of CITY 2, 9 W LED decoratifve wall light fixture made up of polycarbonate base B-22 for 7 Watt LED

S&F in repair of CITY 2, 9 W LED decoratifve wall light fixture made up of polycarbonate base B-22 for 7 Watt LED.

S & F Decorative LED light fitting hanging type with flexible coduit & retofit lamp B-22holder base and cover with fency lamp shade for 9 Watt LED lamp

Supply & fix LED Mirror light 15 Watt LED water proof Decorative tube light 60 cm ( approx.) surface mounted with cover complete with LED tube

Supply & fix in repair LED Mirror light 15 Watt LED water proof Decorative tube light 60 cm ( approx.) surface mounted with cover complete with LED tube .

Supply & fix LED Ceiling light 18 Watt round surface mounted die cast aluminium housing with frosted diffuser including LED lamp complete

Supply & fix in repair LED Ceiling light 30 Watt square 2'X2' surface mounted die cast aluminium housing with frosted diffuser including LED lamp complete.

Supply& Fixing Exhaust fan AC single phase, PVC body, heavy duty, 230 Volts, of size 250mm sweep with louvers complete with all accessories.

Supply & Fix Water Heater Storage type , electric, capacity 25 litres, BEE 5 star rated.

M & L for sub main wiring with 2 run of FR PVC insulated & unsheathed multistranded copper conductor of nominal cross sectional area 6.0 sqmm alongwith one run of FR PVC insulated & unsheathed multistranded copper conductor of nominal cross sectional area 4.0 sqmm as earth continuity conductor drawn through in PVC conduit all as directed.

S&F single pole and neutral enclouser having IP -67 protection with a three pin & earth plug with socket complete and one single pole 20 A 240 V MCB complete all as specified and directed

S&F sheet metal enclousers (DBS) when MCBs to be used 8 way double door single pole & neutral with 200 Amps rated bus bar.

S&F MCB single phase and neutral 16A-63A, 230V.

S&F MCB SP 6A-32A, 230V.

.Excacvation in trenches not exc 1.5 mtr wide and n exc 1.5 mtr in depth and getting out in soft/loose for laying cables complete all as specified.

.Returning, filling in including spreading, levelling, watering and well ramming in layers n exc 25 cm in soft/loose soil complete all as specified.

.Removing excavated material n exc 50 m and depositing where directed at a level n exc 1.5 m above the starting point

Supply & laying sub class B bricks, well burnt , laid wirdth wise along the length of cable laid in trench over sand cushion laid for cable protection, complete as specified and directed.

Material and labour for river washed and sreened, dry sand for filling in trench below and around the under ground cable for cushioning of cable etc, complete all as specified.

Boring of holes under road or cutting the road/path/pavement/hard standing or any other situation by mannual means for 40mm/25mm bore GI pipe for crossing the cable and making good both the ends all as specified and directed at site. Note :- GI pipe shall be measured and paid separately under respective item.

Supply & fix tube 25mm bore light grade GI with all fittings for cable protection for road crossing/ culvert/ path/ on wall/ floor/ pole/ across the road/path/culverts or laid in floor.

Supply, laying & testing cable XLPE insulated , screened, PVC beded, galvanised steel strip or wire armoured, electric power cable ( heavy duty ) 1100 Volts grade with stranded aluminium conductor of size 10 sqmm 2 core.

.M & L for earthing complete with galvanised steel earth plate electrode 60cm x 60cm x 6 mm thick, burried directly in ground (earth pit not less than 2.25 mtr deep below ground level ) with top edge of the plate not less than 1.5 metres below normal ground level connected to galvanised earth lead wire 4 mm dia connected to test point by means of nut, bolts and washers made out of galvanised iron or steel all including earthing pit in PCC (1:3:6) type C1,RCC (1:2:4) type B1 precast cover slab with one handle made out of 8 mm dia round bar,20 mm dia (medium grade) protecation pipe and providing layer of charcoal or coke and salt in alternative layers,necessary earth work complete as shown in Electrical plate No 5 as specified or indicated including testng on completion. Note :- Tenderer may note that amount of credit will be deducted from the total amount arrived, at the time of Acceptance of contract.

M/S ABHISHEK ENTERPRISES

j u enterprises

M/S R S Constructions