IMPROVEMENT OF INFRASTRUCTURE FOR MRSAM FACULTY AT MAKARPURA AND SPECIAL REPAIR TO BCR AND PHOTO SECTION AT HARNI AT AF STN BARODA

Amount

Demolition of Stone slabs and tiles of any description or thickness Laid bedded and pointed in any mortar in floors, aprons etc complete all as specified and directed

Dismantling of floor, hearth or wall tiling including cement mortor bedding (but not backing) removing the rubbish outside MD land complete all as specified and directed

Taking down cement plaster of any description in any position, including racking out joints, hacking for key scrubbing down with water etc in small patches complete all as specified and directed

Demolition of brickwork or stone/boulder masonry built in cement mortar incl all quoins, arches pillars etc but excluding ashlar facings complete all as specified and directed

Demolition of cement Concrete (unreinforcement in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and directed

Taking down Chowkats or frames with shutter (without taking off shutter from the frame) not exc. 1.5 sq. m each and removing to store complete all as specified and directed

Taking down Chowkats or frames with shutter (without taking off shutter from the frame) exc. 1.5 sq. m and n.exc 4.00 sqm each removing to store complete all as specified and directed

Taking up or down 15mm bore steel tubing and connections, including cleaning for refixing or removal to stor complete all as specified and directed

Taking up or down 20mm bore steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and directed

Taking up or down 25mm bore steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and directed

M&L Brickwork with subclass 'B' bricks, straight or curved on plan exc 6m mean radius built in CM 1:6 complete all as specified and directed

M&L rendering 10mm thick in CM (1:6) on fair faces of brick work or concrete surface ,finished surface even & smooth without using extra cement complete all as specified and directed

M&L for rendering in two layers (i.e) CM 1:6, 10mm thick as first layers and CM 1:4, 5mm thick as 2nd layer on fair face of brick or on concrete surfaces finished even and smooth without using extra cement complete all as specified and directed

M&L rendering 10mm thick in CM (1:3) on concrete surface of ceiling ,finished surface even & smooth without using extra cementcomplete all as specified and directed

GI wire netting 0.90mm dia and 12mm mesh lathing to wood or metal studding, joists, etc. in walls, ceilings, stanchions, beams, etc. including all laps, cutting and waste complete all as specified and directed

M&L preparation of newly plastered or unplastered wall surfaces and applying two coats of oil bound emulsion distemper (as approved by GE) including applying Birla white putty as per manufacturers's specifications. applied only by the authorised applicator of manufacturer(as approved by GE) Complete all as specified and directed

All as per item No 16.00 above but on ceiling surfaces complete all as specified and directed

M&L preparation of newly plastered or unplastered surfaces of walls and applying two coats of cement base paint coamuflage pattern over a priming coat on walls upto 4th floor including cleaning window glasses, joinery, electric fittings, wiring etc of drops and splashes and cleaning premises clean and tidy complete all as specified and directed by

M&L for preparation of old decorated surfaces plastered or unplastered on walls including cornices pilasters by brooming down or steel wire brushing, scraping down, smoke shoot, moulds, mors and efforescent salts and treating oil and greasy spots and applying one coat of white wash on walls complete all as specified and directed

All as per item No. 19.00 above but applying one coat of white wash on ceiling complete all as specified and directed

M&L for prepration on the existing surfaces on wall/concrete surfaces throughly, washing rubbing down in the water, cleaning upto the entire satisfaction of the Engineer-in-Charge and apply one coat of cement base paint camuflage pattern, colour as approved by GE complete all as specified and directed

M&L for complete removal of existing treatment on wall surfaces by scraping down and washing with water to the satisfaction of Engineer-in-Charge and applying two coats of Oil Bound Emulshion distemper over and including applying Birla white wall care putty (as approved by GE) and to be applied only by the authorised applicater of manufacturers (as approved by GE) including cleaning window glasses, joinery, electric fittings, wiring etc of drops and splashes and cleaning premises clean and tidy complete all as specified and as directed

All as per item No 22.00 above but two coats of oil bound distemper on ceiling complete all as specified and directed

M & L for complete removal of existing treatment by scraping down completely on brick / stone walls/ concrete surfaces thoroughly, rubbing down washing with water to the entire satisfaction of Engineer-in-Charge and applying two coats of exterior ACRYLIC Emulshion paint (Colour or shade as approved by GE) over and including a coat of primer as per manufacturers instruction complete including cleaning window glasses, joinery, electric fittings, wiring etc of drops and splashes and cleaning premise clean and tidy complete all specified and directed

All as per item No 24.00 above but two coats acrylic emulshion paint over a coat of primer on ceiling complete all as specified and directed

M&L for preparation of old painted surfaces of wood and wood based material of any description over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed

M&L for preparation of old painted surfaces of steel and iron surfaces over 10cm width or grith and applying one coat of synthetic enamel paint complete all as specified and directed

M&L 18-20 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, win-dow-cills, cooking plat¬forms and like in cement mortar (1:4) including point¬ing in white cement (1:2) us¬ing marble dust with admix¬ture of pigment to match with shade of granite complete all as specified and directed

M&L for Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations complete all as specified and directed

Moorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering complete all as specified and directed

M&L for hard core with broken stone of gauge n.exc 63mm deposited spread and levelled in layers n.exc 15 cm thick complete all a specified and directed

M&L Plain cement concrete type D-2 1:4:8 (using 40mm graded crushed stone aggregate) as in 100mm thick flooring finished surfaces even and rough to receive the flooring etc without using extra cement, complete all as specified and directed

M&L Plain cement concrete type B-2 1:2:4 (using 20mm graded crushed stone aggregate) as in 75mm thick flooring finished surfaces even and fair without using extra cement, complete all as specified and directed

All as per item No. 33.00 above but 50mm thick complete all as specified and directed

M&L Cement concrete type C-2 1:3:6 (using 40mm graded crushed stone aggregates) as in 75 mm thick plinth protection , finished surfaces even and smooth without using extra cement, complete all as specified and directed

Forming 12mm thick Expansion joints filled with pre-formed bituminous filler and top 30mm primed and sealed with sealing com­pound, Grade 'A', complete all as specified and directed

M&L Machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of theslab including rubbing and polishing complete over and including 15mm thick screed bed in CM 1:4 complete all as spd and directed.

M&L Kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar laid over cement screed and jointed with ditto as per item 37.00 over and including 10mm thick screed bed in CM 1:4 complete all as specified and directed

M&L Non skid coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.18 sqm but not exc 0.38 sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including screed bed 15mm thick in CM (1:6)complete all as specified and directed

S &F glazed ceramic coloured tiles in vertical surface 450 x300x7 mm thick white set and jointed in neat cement slurry and pointed in white cement to match over and including 10mm thick rendering in cm 1 :4 as backing coat, even and fair to receive tiles etc complete all as specified and directed

Vitrified Ceramic tiles 9 to10 mm thick (square/ rectangular) polished (doubly charged), area of each tiles not exceeding 0.36 sqm but not exceeding 0.42 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 20mm thcik screed bed in CM 1:6 complete all as specified and directed

Vitrified Ceramic tiles 10 mm thick (square/ rectangular) polished (doubly charged), as in skirting, dado etc with matching to item No 43 above set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10mm thcik screed bed in CM 1:4 complete all as specified.

M&L for Acid resistant tiles 15mm thick vitreous ceramic, unglazed, set, jointed and pointed in chemical resistant mortar, resin type, in floors and including screed bed 20mm thick in CM (1:4) complete all as specified and directed

S&F Health faucets for EWC complete all as specified and directed

S & F in repairs stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed to aluminium windows shutters incl aluminium beading etc complete all as specified and directed

S & F in repair vitreous china wash basin, white flat back, size 550 x 400 mm with pedestal including waste pipe,waste coupling,PVC connection 450 mm long, brackets etc complete all as specified and directed

S&F in repair Vitreous China wash down water closet pan (pedestal pattern), white (including fixing bolts, and flush pipe) complete all as specified and directed

S&F in repair 15mm dia Bib taps fancy type CP, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed

S&F 15mm dia Pillar laps, cast copper alloy, with capstan heads, chromium plated fancy type , screwed down high pressure, with or without lettered 'Hot1 or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed

S&F in repair 15mm dia angle Stop cock, cast copper alloy fancy type CP, screwed down, high pressure, with crutch or butterfly handle, screwed one end for iron pipe and other end for PVC connection pipe complete all as specified and directed

S & F in repair water closet seat black/white closed pattern with flat bottom and cover and MS chrominium plated of aluminium hanging device complete all as specified and directed

S&F in repair 10ltr capacity PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets complete all as specified and directed

S&F in repair Vitreous China Urinal, Half stall type, white (excluding flushing cistern, flush pipe and waste pipe) complete all as specified and directed

Disconnecting existing water tanks (PC/RCC) exc 500 ltr & n.exc 1000 ltr capacity, setting aside (or lowring if required ) for repairs, cleaning etc and hoisting if required , reconnected including cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes, etc. complete all as specified and directed

S&F Rotational moulded polye­thylene water storage tanks 1000 ltr capacity (cylindrical vertical with closed top) hoisted and fixed in position including taking down the existing one all as specified in SSR Part I complete all as specified and directed

S&F in repair 25mm size Ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed complete all as specified and directed

S&F in repair PVC water storage tank cover for 500/1000/2000 ltr capacity with pvc nut and bolt and fixing arrangement complete all as specified and directed

M&L Plain cement concrete type B-1 1:2:4 (using 20mm graded crushed stone aggregate) as in 25mm thick sub base of flooring finished surfaces rough to receive floor finishes, complete all as specified and directed

S&F in repair cast iron floor trap 75 mm outlet dia with grating including jointing to waste pipe fixed in cement concrete type B1, (1:2:4) complete all as specified and directed

S&F grating square 150mm size of CP ( minimum weight 100 gms) complete all as specified and directed

S&F in repair 50mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed

S&F in repair 75mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed

S&F in repair110mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed

S&F 50mm dia PVC (SWR) bends any radius complete all as specified and directed

S&F 75mm dia PVC (SWR) bends any radius complete all as specified and directed

S&F 110mm dia PVC (SWR) bends any radius complete all as specified and directed

M&L for PVC (SWR ) gully trap 125/110mm, setting and jointing with solvent cement in repair complete all as specified and directed

S&F PVC connection 15mm dia with PTMT nut of length 450mm long complete all as specified and directed

S&F Vitreous China soap tray embedded in the wall complete all as specified and directed

S&F Bottle trap of CP having minimum water seal of 25mm .(Minimum weight 260gms) complete all as specified and directed

M&L Anodised aluminium frame for doors, windows, ventilators powder coated with one or more rebates including joining cleat, gaskit, rubber, locking device etc for fixing cocomplete all as specified and directed

S&F (in repair) Door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and directed

S&F 5mm thick tinted glass fixed with and incl necessary rubber gasket and aluminium beading all as directed. Note : cost of rubber gasket and aluminium beading are deemed to be including in the rates quoted against the item complete all as specified and directed

S&F 6.3 mm thick frosted on one side sheet glass fixed with and including necessary rubber gasket and aluminium beading incl extra over sheet glass, ordinary quality, if sheet glass is ground or obscured or frosted, on one sideall complete all as specified and directed

S&F 4.8mm thick Sheet glass, ordinary Quality and glazing with oil putty or wooden beeds in square exc 0.5 sq. m in each pane complete all as specified and directed

S&F 4mm thick Figured glass, pin head type and glazing with oil putty or wooden beeds in squares n exc 0.5 sq. m in each pane complete all as specified and directed

M&L for 12mm thick Prelaminated particle board, exterior grade, prelaminated both sides with decorative choice laminations, fixed with screws to timber frame work complete all as specified and directed

S&F (in repair) Mortice lock Mild steel vertical type size 100mm 2 levers fixed to wooden or Aluminium door shutters complete all as specified and directed

Resecuring or easing & adjusting without taking down shutters of any description n exc 1 sqm each complete all as specified and directed

Resecuring or easing & adjusting without taking down shutters of any description exc 1 sqm and n exc 2 sqm each complete all as specified and directed

S&F 100 mm Aluminium anodised tower bolts of extruded section including screws complete all as specified and directed

S&F 150 mm Aluminium anodised tower bolts of extruded section including screws complete all as specified and directed

S&F 300mm Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed

S&F 100mm size butt hinges stainless steel medium weight complete all as specified and directed

S&F 150mm size Aluminium handles, cast type, anodized complete all as specified and directed

S/F 25mm bore GI pipe tubes medium grade galvanised with all fittings and fixed to complete to walls and ceilings or laid in floors to the following bore of pipe complete all as specified and directed

Supplying and laying 20mm CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings in trenches complete all as specified.

Supplying and laying 16mm CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings in trenches complete all as specified.

Cutting chases in brick walls, for concealed water tubing , etc., and making good in CM 1:3, cutting exc 10 cm and n.exc 20cm girth complete all as specified and directed

S&F 20mm dia Brass Elbow complete all as specified and directed

S&F 16mm dia Brass Elbow complete all as specified and directed

S&F 20mm dia Brass Elbow (3/4 X ½) complete all as specified and directed

S&F 20mm dia Brass Tee complete all as specified and directed

S&F 16mm dia Brass Tee complete all as specified and directed

S&F 20mm dia Male Brass Threaded Adaptor (MTA/ MBTA) complete all as specified and directed

S&F 16mm dia Male Brass Threaded Adaptor (MTA/ MBTA) complete all as specified and directed

S&F 20mm dia Female Brass Threaded Adaptor (MTA/ MBTA) complete all as specified and directed

S&F 16mm dia Female Brass Threaded Adaptor (MTA/ MBTA) complete all as specified and directed

S& F 20mm CPVC Tank Adaptor complete all as specified and as directed

S&F 20 mm CPVC UNION complete all as specified and as directed

S&F in rapir SS Tubular towel rail 450mm long incl fixing arrangements complete all as specified and directed

S&F in repair stainless steel bright finish round shape 100mm size fixed grating over floor trap in white or gray cement to match with existing floor complete all as specified and directed

S&F in repair 25mm dia Stainless steel tubular curtain rod fixed to brackets complete all as specified and directed

S&F in repair Fancy type brackets suitable for fixing of 25mm dia Stainless steel tubular curtain rod complete with fixing screws stainless steel screws. complete all as specified and directed

S&F in repair Sheet glass bath corner shelf assembly consisting of 5.5mm thick sheet glass shelf having radius 20 to 25 cm with chromium plated bracket guard and railing complete all as specified and directed

S&F 30mm thick Flush shutters, solid core construction, with block board core and plywood face panels, and both faces covered with decorative face veneer with lipping/frame to match complete all as specified and directed

S&F 30mm thick 2nd class HW Glazed and skeleton shutters for windwos and ventilators, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (b); supplied and fitted to chowkats complete all as specified and directed

S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC 'C channel having a PVC sheet strip of 20mm width shirk inside with solvent cement for stiles and plan colour PVC sheets for top rail, lock rai & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing complete all as specified and directed

S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing complete all as specified and directed

S&F 150mm size Aluminium handles, cast type, anodized complete all as specified and directed

S&F 100mm size butt hinges stainless steel medium weight complete all as specified and directed

S&F 150 mm Aluminium anodised tower bolts of extruded section including screws complete all as specified and directed

S&F 300mm Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixedcomplete all as specified and directed

M&L for preparation of newly painted surfaces of wood and wood based material of any description over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed

M&L for taking down exesting water proofing treatment (WPT) of any description from roof surfaces incl desmantling of existing PCC/plaster surfaces and roughening of concrete surfaces cleaning and wahsing down the surfaces with water and removing rubbish to out side MD land complete all as specified and directed. Note :- Felts and cement plaster/tiles etc shall be measured as one layer only.

M&L for 15 mm thick screed bed or bedding layer in CM 1:4 over roof surfaces without using extra cement for screed bed with water proofing compound complete all as specified and directed. Note : WPC will be measured and paid separatly

M&L for applying cold bituminous primer @ 0.30 ltr/Sqm confirming to IS-3384 and laying APP polymer modified fiber glass reinforced membrane 3mm thick weight not less than 3.5kg/sqm (modified bituminous water proofing membrane ) with plain finish with polystere base reinforcement, sealing all over with lap of 75mm in length side and 100mm on width side of membrane by torching the same and including applying a coat of bituminous aluminium paint @ 100 gms/sqm all as per manufacturer instructions complete all as specified and directed .

Note:- (a) Rate quoted deemed to be inclusive of cleaning of surface to be treated properly to receve the primer and all as directed by the Engr-in-Charge. (b) Necessary guarantee certificate shall be given by contractor for 10 years from the date of completion of work. (c) APP membrane treatment shall be done firstly at corners and junction of parapet wall 30cm on verticle position and 30cm on horizontal position shall be done with proper attention and work carried out by authorised applicator only.Main portion of roof treatment shall be commenced only on completion of corners/ edges/ junctions. (d) APP membrane shall be taken upto outside of the parapet wall to an extent of 150mm minimum. (e) Ensure while laying the treatment no bulging on surface/voids shall be found and proper care/attention be given for the treatment. (f) If any work executed at site without any authorised applicator, the same shall be rejected and no payment shall be made. (g) Codntractor shall produce the certificate from the manufacture for the authorised applicator before commencement of work.

M&L for cemnnt conrete type B-0 1:2:4 (using 12.5mm stone aggregate) (in roof slabs) laid to stop 1:30 in padding for WPT over roof slab complete all as specified and directed

M&L for Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60mm thickness, M-35 Grade with grey cement and colour pigment , complete all as specified and as directed including taking down old unservicable existing pever block. complete all as specified and directed

M&L for Sand filling under floors or in foundations including watering and consolidation in layers, complete all as specified and directed.

Dismantling boarding, any description, fixed in any position with nails complete all as specified and directed

M&L false ceiling work of Anodised aluminium snap grid frame work ceiling grid system UNLOCK comprising of main runner 34mm x 24mm x 0.35mm, cross tee 24mmx 24mm x 0.40mm and GI suspenders 8mm dia fixed to ceiling and fixing mineral fibre acoustics ceiling borad of size 600mm x 600mm x 12mm thick complete all as specified and instructions of manufacturers incl taking down existing ceiling taking out side of MD land complete all as specified and directed

Excavation in trenches not exceeding 1.5m width and not exceeding 1.5 m in depth and getting out in soft/loose soil for taking up/laying cable/pipe etc completed all as apecified and directed.

M & L for dry Sand cushioning to underground cable with screened, washed river sand, including punning gently all as specified and directed. Note: - Thickness after punning will be measured for payment.

Supply and laying precast concrete cable covers, class LV type -I of size 250mm x150mm x40mm all as specified and directed.

Returning, filling including spreading, leveling watering & well ramming in laying not exc. 25cm in Soft/loose soil complete all as specified and directed

Removal of excavated material at a distance not exc 50 mtr and dipositing where directed at a level not exc. 1.5 mtr above the starting point as Soft / loose soil complete all as specified and directed

Labour only for boring under road/drain by manual method for inserting the light grade pipe GI tubing up to 50 mm dia for cable protection complete all as specified and directed

Supply and laying in trenches in road cross / floors tube galvanished iron light grade with all fittings for protection of cable of 50mm bore pipe complete all as specified and directed

Supply, laying and testing in repair to replacement cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 25 sq mm 4 core complete all as specified and directed

Supply and fix in repair cable jointing kit for 1.1 KV grade cable for straight through joint complete with Jointing material heat Shrink type and accessories suitable for 3 ½ / 4 core XLPE, armoured, Al conductor cable of size 25 to 50 sqmm,Indoor/Outdoor type complete all as specified and directed

S & F in repair cable path indicator for LT Cable made of aluminium alloy stand on 1:2:4 type B1 (using 20 mm graded crushed stone aggregate) with CI Plate route indicator marked/embossed with LT CABLE sign, voltage & cable size mentioned in bold letters painted with brown paint including necessary excavation & earth work removal complete all as specified and directed.

M & L for teel tubular swaged poles complete with cast iron base plate, finial taper plug, bolts, nuts & screws as specified type type 410 SP-55 (11.0 metres long), Including, painting two coat(as per air directed) complete all as specified and directed Note : Earthwork / foundation and coping shall be measured and paid separately

M&L for PCC (1:4:8) type D-2 using 40mm graded crushed stone aggregate in foundation for electrci poles, strut for outdoor panel etc, including necessary form works and air finish to exposed surfaces without using extra cement, complete all as specified.

M & L for PCC 1:3:6 type C-1 using 20mm graded store aggregate as in bands, copying, bed plates etc including slightly rounded or chambered angles complete all as specified and directed

M & L for PCC 1:2:4 type B-1 using 12.5 mm graded store aggregate as in bands, copying, bed plates etc including slightly rounded or chambered angles complete all as specified and directed

Supply & fix LED flood light 200 watt Amaze is LED floodlight luminaire with ultra sleek, light weight and with secondary optics, made of pressure die-cast housings with IP66 ingress protection and impact resistance of IK07. 4kV inbuilt and 10kV*external surge protection fixed on pole with fixing arrangement(angle iron, clamp, nut bolt and copper conductor 1.5 sqmm 3 core up to 12 mtr complete all as specified and directed.

Supply & fix Next Generation LED street light with pressure die-cast housing along with prismatic polycarbonate modular secondary lens optics for City Road application with IP66 ingress protection and impact resistance of IK08. 4kV inbuilt surge protection with Top opening driver cover for easy maintenance 36 watt fixed on existing building with suitable GI bracket, nut bolt, clamp and connected with copper conductor 1.5 sqmm 3 core complete all as specifed and directed.

Supply and fix PVC box of outside size 350mm x 250mm x 150mm and inside size 300mm x 200mm x 105 mm including 4 Nos of bus bar strip of aluminium of size 25x4 mm suitable for 440 volts of suitable amps rating including 1 No MCB SPN ,6 to 32 Amps, 250 volts with 'C' curve, to be fixed on pole with clamp and nut bolt complete all as specified and directed

M & L for outdoor type PVC Box for switch board 02 nos 15 Amps switch socket and 02 Nos 5 Amps switch & socket including aluminium bus bar and all electric connection fixed on angle iron 40x40x6 mm, cemented work fixed 45 cm above the ground level complete all as specified and directed (Note : electric connection box, angle iron and connected work are included in this item).

Material & Labour for earthing complete in repairs with galvanized iron earth plate electrode 600 mm x 600 mm x 6 mm thick buried directly in ground (earth pit not less than 2.25 m deep below normal ground level) with top edge of the plate not less than 1.5 m deep below normal ground connected to GI strip of size 25x4 by means of bolts nuts check nuts and washer of galvanized steel, watering pipe of 20 mm bore, galvanised iron, medium grade, and 40 mm bore galvanised iron light grade for earth wire protection including all excavation earth work in any type of soil, PCC pit with RCC pit cover charcoal salt, funnel complete all as shown in the electrical plate No 3 of SSR part – I and tested on completion complete all as specified and directed

Supply & fixing cross arms, bracing, supports, clamps and back plates fabricated from structural steel sections including nuts & bolts , washers , welding bending cold or hot , drilling holes for bolts in any shape or size as indicated or directed and inclusive of two coats of aluminium paint over a coat of red oxide primer complete all as specified and directed

Gayatri Associates

shree nathji trading corporation