PROVISION OF 04 NUMBER TOILET BLOCKS FOR OUTSOURCED STAFF AT NORA PROVISION OF CHEQUERED TILES FOOT PATH AT MAIN ROAD NAVAL PARK ADDITIONS AND ALTERATIONS TO GE NB OFFICE P189 PROVN OF STAINLESS STEEL LETTERING FOR BUILDING NO P73 SAUW BUILDING AT I

Amount

Surface Excavation not exceeding 30 Cm deep and averaging 15 Cm deep and getting out in Hard / dense soil complete all as specified and as directed.

Excavation in trenches, not exceeding 1.5 M wide and not exceeding 1.5 M depth for foundation, etc., and getting out in hard/ dense soil complete all as specified and as directed.

M&L for PCC 1:4:8, Type D2 ( using 40mm graded aggregates) as in bed concrete for foundation etc complete all as specified and as directed.

M&L for RCC 1:2:4 Type B1 (using 20mm graded granite stone aggregates) as in foundations, including rafts, footings, foundation beams, plinth beams, bases for columns, etc. basement slabs, under-reamed piles and mass concrete complete all as specified and as directed.

M&L for RCC 1:2:4 Type B1 (using 20mm graded granite stone aggregates) as in Columns, pillars, piers, posts and struts mass concrete complete all as specified and as directed.

M&L for RCC 1:2:4 Type B1 (using 20mm graded granite stone aggregates) as in Beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and as directed.

M&L for RCC 1:2:4 Type B1 (using 20mm graded granite stone aggregates) as in Chajjas complete all as specified and as directed.

M&L for RCC 1:2:4 Type B1 (using 20mm graded granite stone aggregates) as in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and as directed.

M&L for PCC 1:3:6 type C2 (using 20 mm graded stone aggregate) as in plinth protection 100mm thick complete all as specified and as directed.

M&L for Mild steel TMT bars 10 mm dia., and over cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia., or securing with clips complete all as specified and as directed.

M&L for Mild steel TMT bars 6 to 8 mm dia., and over cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia., or securing with clips complete all as specified and as directed.

Material and Labour for Brick work with fly ash bricks, straight or curved on plan exceeding 6 M mean radius built in cement mortar 1:6 complete all as specified and as directed.

Material and Labour for Brick work with fly ash bricks, straight or curved on plan to any radius in half brick thick walls built in cement mortar 1:4 including provision of 2Nos 8mm dia TMT bars at every fourth course complete all as specified and as directed

M&L for Rendering 15mm thick on fair faces of brick work or concrete surfaces of walls with cement mortar 1:4 complete all as specified and as directed

M&L for Rendering 10mm thick on fair faces of brick work or concrete surfaces of walls with cement mortar 1:4 complete all as specified and as directed

M&L for Rendering 10mm thick on ceiling on fair faces of concrete surfaces with cement mortar 1:3 complete all as specified and as directed

M&L for Preparing newly plastered surfaces of walls and applying three coats of white wash complete all as specified and as directed.

M&L for Preparing newly plastered surfaces of ceilings and applying three coats of white wash complete all as specified and as directed.

M & L for preparation of newly plastered wall/ceiling surfaces and applying two coats of Cement Based paint over a coat of primer complete all as specified and as directed. Make : Super-Snocem / Durocem / Aquacem

M&L for Moorum / red bajri filling in floors or pavings, laid in layers not exceeding 15cm thick, spread, levelled and rammed including watering complete all as specified and as directed.

Removing Excavated spoil to outside MD land depositing where directed at a level not exceeding 1.50m above the starting point complete all as specified and as directed.

Returning, filling in, including spreading, leveling, watering and well ramming in layers not exceeding 25 cm thick in hard soil complete all as specified and as directed.

M&L for 100mm thick PCC 1:4:8 type D-2 (40mm graded aggregate) as in sub base of floor / pavings etc complete all as specified and as directed.

M&L for 25 mm thick PCC 1:2:4 type B1 (Using 20 mm graded granite stone aggregate) as in sub base of floorings complete all as specified and as directed.

S&F Non - skid (Matt finish) Ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over Screed bed or bedding layer of cement mortar 1:6, 15 mm thick for laying floor finishes complete all as specified and as directed. Make : Somany / Kajaria / Orient Bell / Cera / Asian

S&F Glazed coloured ceramic tiles in vertical surface 450 x 300x 7 mm thick ,set and jointed in neat cement slurry and pointed in white or cloured cement over and including 10mm thick backing coat CM of 1:4 complete all as specified and as directed. Note : Rate includes for cutting for offsets etc Make : Somany / Kajaria / Orient Bell / Cera / Asian

S & F Vitreous china squatting pan, Orissa pattern, size 580 x 440 mm white, with integral foot rests and 10 litres PVC capacity valve less, Syphonic action type, Flushing cistern, low level, white with inlet, ball valve, float and handle including brackets including PVC Flush pipe 32 mm dia., and including removing of existing pan and setting the trap and pan in lime concrete 1:2:5 minimum 150 mm thick all round and finished just before level of rim of pan to receive the floor finish complete all as specified and as directed. Make :M/s. Parry ware / M/s. Hindusthan Sanitary ware & Industries Ltd / M/s. Neycer Kemberg / M/s Cera ( All are 1st quality)

S & F Vitreous china urinal, bowl type, flat back, white of size 465 X 355 X 265mm, complete including providing and fixing plugs, bedding urinal against wall in cement mortar [1:2], securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement, with grating and union for discharge pipe, complete all as specified and as directed. Make :M/s. Parry ware / M/s. Hindusthan Sanitary ware & Industries Ltd / M/s. Neycer Kemberg / M/s Cera ( All are 1st quality)

S & F Vitreous China Ware Wash hand basin white, flat back, size 550 x 400 mm size (flat back or angle back type) including cutting for and pinning ends of brackets or erecting stand including , waste coupling and PVC connection complete all as specified and as directed. Make :M/s. Parry ware or equivalent in M/s. Hindusthan Sanitary ware & Industries Ltd / M/s. Neycer Kemberg / M/s Cera ( All are 1st quality)

Supply anf Fix in opening Factory made solid PVC door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube manufactured as per SSR Part I specifications and drawing complete all as specified and as directed.

M&L for factory made PVC door frame of size 100mmx 45 mm with a wall thicknesss of 5 mm, made out of extruded 5 mm plain/prelam PVC form sheet of density 600Kg/cbm manufactured by an ISO 9000, mitreout at two corners and jointed with 4 nos of 150 mm long brackets of 15x15mm square tube. the two vertical door frames are to be reinforced with 40x20 mm MS tube of 19 gauge through out the frame. The door frame shall be fixed to the wall using 65/100 mm long MS screw through the frame by using PVC fasterns, a minimum of 4 nos of screws to be provided for each vertical member & minimum 2 nos for horizontal member etc complete all as specified and as directed.

M&L for 30 mm thick factory made PVC flush shutter door consisting of panel of hollow PVC profile of 20 mm thickness consisting of frame made out of MS tubes of 19 gauge thckness of size of 19x19mm. Hollow PVC profile shall be lipped with 10mm (5mmx2) thick & 20 mm width on stiles and rails uisng solvent cement. The inner panel shall be laminated with 5mm thick PVC sheet of density 600Kg/cbm manufactured by and ISO - 9000 certified company, termite proof, water proof and fire retandent plain/prelam PVC sheet using solvent cement on both the sides of the panel etc, either side complete all as specified and as directed.

S&F factory made solid panel PVC door shutter 30mm thick style consisting of frame made out of MS tube for top and bottom rails.MS frame shall be covered with heat moulded plain colour PVC C channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for syles and plain colour PVC sheet for top and lock rail and bottom rail on either side and as gap insert for top rail & bottom rail:Panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement, supplying and fixing in the frame at site as per specifications complete all as specified and as directed.

S&F factory made solid PVC moulded door shutter, 28 to 30mm thick(styles) with 2,4 or 6 raised panel design with 2mm thick moulded PVC sheet on the front face & 2mm thick plain colour PVC sheet on back face at site as per specification & drawing( hardware fitting shall be measured seperatly ) complete all as specified and as directed.

S&F Steel ventilators with top hung shutter including hinges, steel peg stay and 3mm thk sheet glass complete all as specified and as directed

S&F 300mm long Brass, sliding door bolt with sand or die-cast brass hasp, staple (bolt type) and fixing bolt with rolled or drawn brass bolts and fixed complete all as specified and as directed.

S&F Brass barrel tower bolts, with cast or sheet barrel and rolled or cast bolts and fixed with barrel of extruded section of 150mm length complete all as specified and as directed.

S & F 150 mm long Extruded Aluminium alloy handles, [ISI marked] fabricated type, anodised complete all as specified and as directed.

S&F 100 mm long medium weight, Stainless steel butt hinges complete all as specified and as directed.

M&L for Cutting holes in brick walls in cement mortar for inserting holdfasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 Type B-1 as required complete all as specified and as directed.

S&F mild steel angles, bars, flats etc., as in supports for stiffening of fencing, wall ties, hold fasts, clamps and similar small articles conforming to Fe 410-O or Fe 310-O complete all as specified and as directed.

Supply and Fix in repairs [ ISI MARKED ]10 litres capacity PVC valveless, syphonic action type flushing cistern low level white with inlet, Ballvalve , Float Valve and handle including brackets complete all as specified and as directed . Make : SLIMLINE from PARRYWARE / HINDWARE / CERA

S&F fixed PVC connection for cold / hot water 600 mm long and 15mm dia to flushing cistern/ sanitary fittings with brass nut connections at the ends complete all as specified and as directed (Work up to 4th storey.)

S & F PVC (SWR) Floor trap of 75 mm outlet plain with grating including jointing with solvent cement complete all as specified and as directed .

S & F 15 mm bore Fancy type Chromium plated bib taps, cast copper alloy, with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule including taking down the existing fitting complete all as specified and as directed. Make : M/s Hindware / Orient / Seiko / Dripless

S & F in repairs 15 mm bore chromium plated bib taps, cast copper alloy, with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and as directed. Make : M/s Hindware / Orient / Seiko / Dripless

S&F 15 mm bore Fancy type pillar taps, long swan neck type with quarter turn, Cast Copper alloy, with capstan heads, chromium plated, screwed down high pressure with or without lettered Hot or Cold with long screwed shanks and fly nuts, screwed for iron pipe and fixed complete all as specified and as directed. Make : M/s Hindware / Orient / Seiko / Dripless

S&F for Stop valves, cast copper alloy screwed down, high pressure, with crutch or butterfly handle, screwed both ends for 15 mm bore iron pipe or for unions, in repairs complete all as specified and as directed. Make : M/s Hindware / Orient / Seiko / Dripless

S & F in repairs Fancy type chromium plated 15 mm bore Stop valves, cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions including taking down the existing fitting complete all as specified and as directed. Make : M/s Hindware / Orient / Seiko / Dripless

Supply and Fix 500 litres capacity Rotational moulded Polythene [HDPE] Water Tanks, [ ISI Marked ] double layered, Cylindrical & Vertical Type hoisted and fixed in position including provision of 40mm / 25mm dia spouts for connecting inlet, outlet, over flow and washout pipes fixed in position all as specified in SSR Part I complete all as specified and as directed. Make : M/s SINTEX , M/s POLYCON, M/s ROTEX, M/s POLY WELL

Supply and Fix 2000 litres capacity Rotational moulded Polythene [HDPE] Water Tanks, [ ISI Marked ] double layered, Cylindrical & Vertical Type hoisted and fixed in position including provision of 40mm / 25mm dia spouts for connecting inlet, outlet, over flow and washout pipes fixed in position all as specified in SSR Part I including dismantiling the old existing tank complete all as specified and as directed. Make : M/s SINTEX , M/s POLYCON, M/s ROTEX, M/s POLY WELL

S & F 15mm bore Galvanized Steel tubes, medium grade with all fittings and fixed complete to walls and ceiling or laid in floors complete all as specified and as directed. Make : Tata / Zenith / Jindal

M & L for cutting chases, pinning in, making good the facings where required and pointing in CM 1:3 to ends or edges of landings, steps, cills, sun shades, shelves, lintels etc, cutting n.exc. 10cm girth in stone, concrete block or concrete slab for concealling the water supply pipes complete all as specified and as directed

S & F, Ball Brass Valve, suitable for 15 mm bore pipe, high pressure, with polythene float and fly nut complete, screwed for iron pipe or brass ferrule complete all as specified and as directed.

Supply and lay HYPERPLAS-STANDARD 3Kg/sqm polymeric water proofinig membrane incorporating a centre core of 90 micron thick HMHDPE film including coating the surface with a coat of water based bituminous primer @ 100 gms;Sqm followed by a coat of blown bitumenof grade 85/25 or 90/15 @ 1.2 Kg /sqm each at top and bottom of the membrane followed by a coat of bitumenous aluminium primer @ 100 gms/sqm complete including sealing all joints by thermo fusion with minimum 10cm overlap all as per manufacturers instructions complete all as specified and as directed. Make : M/S HYPERPLAS IWL CHENNAI, M/S MULTIPLAS BY STP TEXES LIMITTED, GOREGOAN, M/S STP SUPERIOR POLY PLUS BY STP LIMITED, KOLKATTA, M/S SHIVAM TAR PRODUCTS

S &F Cast iron floor trap of 75 mm outlet plain with stainless steel anti cockroach grating arrangement including jointing to the waste pipe with run lead joint complete all as specified and as directed.

S&F PVC (SWR) pipe [ ISI MARKED ] 75mm bore single socketed with rubber ring joints laid in floors, trenches or fixed to walls complete all as specified and as directed. Make : Supreme / Prince / Infra

S&F PVC (SWR) pipe [ ISI MARKED ] 110mm bore single socketed with rubber ring joints laid in floors, trenches or fixed to walls complete all as specified and as directed. Make : Supreme / Prince / Infra

S&F 75 mm PVC (SWR) junction single, (Single T) equal or unequal complete all as specified and as directed. Make : Supreme / Prince / Infra

Treatment of soil under existing floors using emulsion @ one litre per hole, 300mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2 (1 cement : 2 coarse sand) to match the existing floors complete all as specified and as directed.

M&L for Treating the soil along with external perimeter of building at the rate of 2.25 litre of emulsion per metre of the perimeter wall complete all as specified and as directed.

S&F gun metal globe or gate valves, with iron wheel head, screwed both ends for iron pipe 15 mm dia complete all as specified and as directed. Make: Kirloskar / L & T / Upadhyay / Leader / Zolotto

Use and waste formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams and similar work vertical or to batter complete all as specified and as directed.

Use and wasted formwork to sides of pillars, posts, struts, piers, columns and stanchions complete all as specified and as directed.

Use and waste formwork to chullah hoods, chajjas, troughs and similar items including edges complete all as specified and as directed.

Use and waste formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressum-mers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc. complete all as specified and as directed.

Use and waste formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) complete all as specified and as directed.

Use and waste formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/PCC bands in walls, horizontal or sloping and similar work exc 10cm but n exc 20cm wide complete all as specified and as directed.

S&F Factory Made second class hard wood plain, solid, straight chowkats and frames, wrought, framed, rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and as directed.

S & F 35 mm thick, Factory Made Second Class Hard Wood, Kiln Seasoned and chemically pressure treated plain framed, panelled shutter [any number of panels] with lock rail and panel of 9 mm BWP Commercial ply or 12 mm veneered particle board with commercial face veneers on both faces or 10 mm bison panel complete all as specified and as directed.

M&L for preparation of new or previously untreated wood and wood based surfaces of any description, not otherwise described, over 10cm width or girth and applying two coats of synthetic enamel paint (ordinary tint) over a coat of pink primer complete all as specified and as directed. Make :M/s. Asian Paints [Apcolite], M/s. Berger Paints [Luxol], Jenson & Nicholson [Brolac] all are 1st quality.

S&F for 3mm thick figured glass, pin headed and glazing with oil putty and glazing clips in metal frame second class hard wood beading in wooden frames in squares not exceeding 0.5 Sqm in each pane complete all as specified and as directed. Make: Saint Gobain / Modi Guard / Asahi

Excavating over areas not exceeding 1.5m deep and getting out in hard / dense soil complete all as specified and as directed.

M&L for hardcore of gauge not exceeding 63mm of broken stones or boulders, deposited, spread and levelled in layers not exceeding 15 cm thick watered and rammed to a true surface in broken boulders complete all as specified and as directed.

M &L for 100 mm thick Cement concrete type B2, 1:2:4 (using 40 mm graded stone aggregate) in flooring/ hard standing and finishing the concrete surface even and fair without using extra cement complete all as specified and as directed.

M&L for providing precast cement concrete 1:2:4 type B-1 using 20mm graded granite aggregates as in window or door cills, lintels, bressumers, steps, quion blocks, string courses, copings, kneelers, apex stones, pier caps, columns, posts, corbels with fair finish surfaces, including chamfers, weatherings etc set and jointed in neat cement mortar to match including necessary form work complete all as specified and as directed.

M&L for PCC type C2, 1:3:6 (Using 40mm grded granite stone aggregate ) as in concrete bed to drain pipes including packing under and haunching against the sides of pipes after they are laid tested for pipes of 150mm dia of pipes complete all as required and as directed.

Cutting into existing manholes for connecting new drains making good to pipe and rendering cutting out existing benching for and forming branch channel (1/2 round or 3/4 round section) in cement concrete 1:2:4 type B1, smooth finished and reforming benching as required for 150 mm dia., of pipe complete all as specified and as directed.

S&F 150mm dia Reinforced concrete pipes, class NP3, laid and jointed complete with collars complete all as specified and as directed.

Removing excavated soil material not exceeding 50m and depositing where directed at a lvevel not exceeding 1.5m above the starting point complete all as specified and as directed.

S&F gun metal globe or gate valves, with iron wheel head, screwed both ends for iron pipe 25 mm dia complete all as specified and as directed. Make: Kirloskar / L & T / Upadhyay / Leader / Zolotto

S & F 25mm bore Galvanized Steel tubes, medium grade with all fittings and fixed complete to walls and ceiling or laid in floors complete all as specified and as directed. Make : Tata / Zenith / Jindal

M&L for providing PCC type B-1, 1:2:4 (using 20mm graded granite stone aggregates) as in lintels upto 1.5m clear span, cills, steps; eismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs not provided for in Item 4028, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, complete all as specified and as directed.

S&F Colored designer machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 80mm thick, M-35 Grade finished with grey cement and pigment including 50mm thick sand cushion complete all as specified and as directed. Make : Ultra, Eurocon, Duracrete, Mehatab as approved by GE.

S & F Anodised Aluminium window and ventilator shutters, side hung type without sash bar, aluminum section weighing 0.55 Kg/ RM including necessary joining cleats, glazing clips, rubber packing, anodised aluminum snap beading, screws, anodised aluminum fittings such as peg stays 150 mm long (1 No.), hinges type B-21 100 mm long (2 Nos.), suitable handle (1 No.) complete all as specified and as directed. Make : Jindal / Indal / Hindalco

S&F Anodised aluminium grill of 5mm dia hexagonal channel, including joining cleat for fixing and necessary fixing arrangements as required, complete all as specified and as directed. Make: HINDALCO / INDALCO/JINDAL

S & F 4 mm thick Sheet glass, ordinary quality and glazing with oil putty in squares exceeding 0.5 Sq. M in each pane complete all as specified and as directed. Make: Saint Gobain / Modi Guard / Asahi

Demolition of brick work or stone / boulder masonry, built in cement mortar including all quoins, pillars etc., and disposal off unserviceable materials, debris to out side MD land complete all as specified and as directed.

M&L for rendering 10mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6 finished eve and smooth with out using extra cement complete all as specified and as directed.

M&L for preparing plastered surfaces of internal walls, application of wall care putty (any number of coats required) and sand papering etc and applying two coats of Acrylic distemper over one coat of alkali resistant primer complete all as specified and as directed. Make for Putty : JK white cement / Birla wall care / Jenson & Nicholson Make for Distemper : Asian / Nerolac / Berger ( All 1st quality)

Demolition of floor, hearth and wall tiles / stone slabs of any description or thickness including cement mortar bedding (but not backing) as in floors, skirtings etc laid bedded and pointed in any mortar and removal of debrid/rubbish to out side MD land complete all as specified and as directed.

M&L for Vitrified ceramic tiles 9 mm thick (Square / Rectangular)(Double charged) polished, area of each tile not exceeding 0.36 Sq. M, in floors/walls etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match including over screed bed or bedding layer in cement mortar 1:6, 15 mm thick for laying floor finishes complete all as specified and as directed. Make : Johnson / Nitco / Asian Granito / Varmora

S&F 40mm thick flush shutters, [ ISI marked ] solid core construction, with block board core and plywood face panels, commercial type on both sides, covered with 1.5 mm thick decorative lamination on both sides complete all as specified and as directed.

S & F 200 mm long [ISI marked] Aluminium, anodised, barrel tower bolts of extruded section complete all as specified and as directed.

S & F 300 mm long [ISI marked] Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast Aluminium alloy, complete all as specified and as directed.

S & F 125 mm long medium weight, cold rolled mild steel Butt hinges complete all as specified and as directed.

Taking down Chowkats or frames exceeding 1.5 Sq. M and not exceeding 4 Sq. M each (w/o taking down shutters) incl mongry complete all as specified and as directed.

Taking down shutters of any description exceeding 1 Sq. M but not exceeding 2 Sq. M each complete all as specified and as directed.

S&F Aluminium (extruded section) body door closer hydraulically regulated, designation No. 3 universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 Kg complete all as specified and as directed. Make : Godrej / Everite / Priya

S&F Aluminium frame for doors, windows, ventilators, fixed partitions etc., with one or more rebates with powder coating of minimum 50 micron thick including joining cleat for fixing etc., complete all as specified and as directed. Make : Jindal / Indal / Hindalco

M & L 12 mm thick prelaminated particle board, exterior grade, prelaminated both sides with decorative choice lamination, fixed with screws to timber frame work in cup board shutters or fixed to aluminum frame work with rubber beading etc..complete all as specified and as directed. Make : Anchor / century ply board Industries Ltd. / Archid ply / Kitply / True wood / Green ply

S&F Tinted glass, 5mm thick, with beads, in square n. exc 0.5 sq. m in each pane complete all as specified and as directed. Make: Saint Gobain / Modi Guard / Asahi/ Hindustan Pilkington

S&F Tinted glass, 5mm thick, with beads, in square exc 0.5 sq. m in each pane complete all as specified and as directed. Make: Saint Gobain / Modi Guard / Asahi/ Hindustan Pilkington

12mm thk soft board for Display complete all as specified and as directed.

Racking out cement mortar joints/pointing to random rubble masonry, coursed or uncoursed, cement mortar 1:3 complete all as specified and as directed.

M&L for rendering 15 mm thick on fair faces of stone masonry surfaces or concrete surfaces in cement mortar 1:4 and finished even and smooth without using extra cement complete all as specified and as directed.

M&L for Glass mosic tiles of any size and colour in vertical surface set and jointed in neat cement slurry and pointed in white or cloured cement complete all as specified and as directed. Make : Johnson / Kajaria / Orient / Cera / Asian

M&L for 20mm thick Granite ( of any type) machine cut, in skirting/dado laid over cement screed and jointed with grey cement slurry, and pointed with white cement with admixtures of pigment to match the shade of granite stone including grinding and polishing including screed bed or bedding layer in cement mortar 1:3, 20 mm thick complete all as specified and as directed

S&F of bold metallic stainless steel letters or alphabetes made with 2mm thick sheet, 25mm wide and 10mm thick ( hollow ) fixed in granite cladding elevated from surface, of letters of size 30 x 15cm complete all as specified and as directed.

Demolition of cement Concrete of any description and in any position not otherwise specifically provided for and removing rubbish to out side MD land complete all as specified and as directed.

Treatment by injecting / grouting cement slurry mixed with Conbextra EP 10 (Epoxy resin injection grout) of M/s Fosroc Chemicals / approved chemical in to sunken slabs of toilet by drilling holes at an interval not more than 1 M c/c to a depth of 60 mm and 20 mm diameter and grouting the slurry by mechanical means with required pressure complete all as per technical specifications and as required at site complete all as specified and directed.

M & L for preparing surfaces of sunken floor and applying a coat of Brush bond of M/s Fosroc Chemicals / approved water proofing coating as per manufacturer's instructions and testing for 48 hours with complete filling the sunken floor with water complete all as required and as directed.

M&L for 40mm thick PCC 1:2:4 type B0 (12.5mm graded aggregate) mixed with WPC at 2% by weight of cement, complete all as specified and as directed. Note: WPC shall be measured and paid separately under relevant item.

Supply only integral water proofing compound [ISI marked] complete all as specified and as directed. Make : Acco proof / Impermo / Lik proof / Scott No. 1

Taking down Chowkats or frames not exceeding 1.5 Sq. M each (Without taking off shutters from the frame) including mongry complete all as specified and as directed.

S & F factory made solid PVC ventilators of size 50 x 47mm with 5mm made of extended 5mm thick PVC sheet mitred cut at two corners and jointed with 2nos of 150mm large brackets of 15 x15mm MS square tubes. The two vertical profiles are to be reinforced with 19 x19mm MS frame, the 50% of portion is fixed with 3.5mm thick pin headed/frosted glass and remaining portion is covered with wire mesh and 3.5mm thick pin headed /frosted glass louvers including two member of 12mm dia MS guard bars and necessary fittings and fixtures complete all as specified and as directed. Make: SINTEX or with equivalent sections in NANDI or RAJASHRI PLASTIWOOD makes as approved by the Accepting Officer.

S & F 100 mm long [ISI marked] Aluminium, anodised, barrel tower bolts of extruded section complete all as specified.

S & F 100 mm long [ISI marked] Extruded Aluminium alloy handles, fabricated type, anodised complete all as specified and as directed.

Forming jambsetc, to openings, including cutting, toothing and properly bonding into old work, also facing, joining and pointing to match existing work complete new work built in cement mortar 1:6 complete all as specified and directed.

Taking up or down 15 mm bore steel tubing and connections, complete all as specified and directed.

Taking up or down 20 mm bore steel tubing and connections, complete all as specified and directed.

S & F 20 mm bore Galvanized Steel tubes, medium grade for flush pipes, water supply pipes etc., fixed to walls and ceilings or laid in floors or concealed walls complete all as specified and as directed. Make : Tata / Zenith / Jindal

Taking down rain water/soil waste/vent pipes including all fittings any size and pattern complete all as specified and directed.

S&F 110mm bore PVC (SWR) bends of any radius complete all as specified and as directed. Make : Supreme / Prince / Infra

S&F 75mm bore PVC (SWR) bends of any radius complete all as specified and as directed. Make : Supreme / Prince / Infra

S & F PVC connections 15 mm size with PTMT nuts of length 450 mm complete all as specified and as directed. MAKE : M/S PRAYAG, M/S POLY TUF

S & F Vitreous Ware wash down water closet (Pedestal), white (ETWC) with cover and Mild steel chromium plated hinging device complete all as specified and as directed. Make of WC :M/s. Parry ware or equivalent in M/s. Hindusthan Sanitary ware & Industries Ltd / M/s. Neycer Kemberg / M/s Cera ( All are 1st quality)

S&F EWC closed seat cover to suit existing make, black or white or coloured , with MS chromium plated hinging device complete all as specified and as directed.

S & F Vitreous China Ware Wash hand basin white, flat back, size 630 x 450 mm size with 15 mm bore pillar taps, Cast Copper alloy, with capstan heads, chromium plated, screwed down high pressure with or without lettered Hot or Cold with long screwed shanks and fly nuts, screwed for iron pipe and 32 mm dia., Waste fittings, brass chromium plated for glazed ware sinks, wash basins etc., with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end fixed including removing the existing Basin, pillar tap and brackets and fixing new brackets complete all as specified and as directed. Make of WHB : M/s. Parry ware or equivalent in M/s. Hindusthan Sanitary ware & Industries Ltd / M/s. Neycer Kemberg / M/s Cera ( All are 1st quality) Make of Pillar tap : M/s Hindware / Orient / Seiko / Dripless

S & F in repairs Vitreous China Half stall urinal White complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60 mm long brass screws, pointing around urinal back in cement, complete all as specified and as directed. Make : M/s. Hindusthan Sanitary ware & Industries Ltd / M/s. Parry ware / M/s. Neycer Kemberg /M/s Cera ( All are 1st quality)

S&F in repairs suatting plate urinal, white complete including providing flushing cistern, flush pipe & waste pipe complete all as specified and as directed. Make : M/s. Hindusthan Sanitary ware & Industries Ltd / M/s. Parry ware / M/s. Neycer Kemberg /M/s Cera ( All are 1st quality)

S&F stainless steel gratings for fixing 100mm dia outlet nahani including fixing with white/colour cement complete all as specified and as directed.

S & F brass cromium plated Health faucet, standard size, complete all as specified and as directed. Make: CERA / PARRYWARE / HINDWARE

S&F of 32mm dia waste fitings, brass CP for glazed ware sinks, basins, etc anf fly nuts flange end bedded in red lead cement and other end fixed complete all as specified and as directed

M & L for 125 mm dia brass chromium plated shower rose with swivel joints complete all as specified and as directed.

Supply and Fix in repairs brass chromium plated tubular towel rail 20 mm dia 'D' type 60 cm long between flanges complete all as specified and as directed.

Supply & fixed in repair Toilet paper holder, chromuim plated, box type, fixed to walls with chromium plated (CP) brass screws complete all as specified and as directed.

Preparing old surfaces of ceilings by brooming down or by steel wire brushing and applying two coats of white wash complete all as specified and as directed.

Taking down Cement Plaster of any description on brick or stone walls or concrete surfaces including raking out joints, hacking for key, scrubbing down with water etc and removal of rubbish to out side MD land complete all as specified and as directed.

M&L for Vitrified ceramic tiles 9 mm thick (Square / Rectangular)(Double charged) polished, area of each tile not exceeding 0.36 Sq. M, in skirting/dado etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match including over screed bed or bedding layer in cement mortar 1:4, 10 mm thick as backing coat complete all as specified and as directed. Make : Johnson / Nitco / Asian Granito / Varmora

Complete removal of existing treatment on walls, preparing surfaces of walls applying putty two coats and sand papering till obtaining smooth surface and applying two coats of acrylic distemper over a coat of primer complete all as specified and as directed. Make : Asian / Nerolac / Berger ( All are 1st quality) Make for Putty : JK white cement / Birla wall care / Jenson & Nicholson

M&L for sand cushion for under ground cable protection complete all as specified and as directed. Note : Thickness after punning only shall be measured and paid.

Supply and Lay sub-class B bricks of size 23 x 11 x 7cm complete all as specified and as directed. Note : Brick shall be laid perpendicular to alignment of cable.

Supply, lay, joint, test and commission of LT cable 1100 V grade, [ISI marked] FRLS XLPE insulated, Screened, PVC bedded, Galvanised strip or wire armoured and sheathed, Aluminium conductor Cable of size 4 Core, 25 Sq.mm including cable glands, lugs, jointing materials etc laid in trenches / floors / ducts complete all as specified and as directed. Make: Polycab / Universal / Nicco / Havells

M & L for Point wiring with 1.5 sqmm PVC insulated and unsheathed copper conductor cable 1100V, multistranded drawn in and including PVC conduit of 20mm bore medium grade concealed /semi concealed / surface PVC conduit on wall / ceiling / sunken type with tee bend, elbows, junction box etc with provn of PVC insulated 1.5 sqmm copper conductor cable as earth continuity including 2mm thick MS terminal boxes with 3mm thick hylam sheet cover for fixing switches, sockets regulator and connected the earth wire to common earth dolly complete all as specified and as directed for One switch / light / fan / Bell point controlled by one way switch Make of Cable : Finolex, Polycab, Plaza, Gloster, Harsh all are ISI marked and FRLS cables Make of Conduit : Avon Plast,Precision, Finolex all are ISI marked.

All as per item No. 146 above but for One 3 pin socket 5 amps on independent board complete all as specified and as directed.

S&F switch piano Flush type, single pole one way 5 amp 230 volts 50 HZ complete all as specified and as directed. MAKE : ANCHOR, BAJAJ, LEADER AND CONA [ ALL ISI MARKED]

S&F switch socket combine 5A flush type AC 230V, 50 HZ complete all as specified and as directed. MAKE : ANCHOR, BAJAJ, LEADER AND CONA [ ALL ISI MARKED]

S&F ceiling rose surface bakelite 65 X 50mm two to three terminals complete all as specified and as directed. Make : Cona / Anchor / Legrand

S&F Distribution Board, SPN 4 Way ,Double door 240V with 200Amps rated bus bar complete all as specified and as directed. Make : Indo Asian cat part No. 811805[Optipro] / Standard / Havells

S & F MCB SPN 40Amps 240 Volts B curve, complete all as specified and as directed. Make: Indo Asian Cat part No. 811035 / STANDARD / HAVELLS

S & F MCB SP 6-32A Amps 240 Volts B curve, complete all as specified and as directed. Make: Indo Asian Cat part No. 811008 to 811015 / STANDARD / HAVELLS

S&F surface batten and LED tube light, retro bar professional WH 5700K and 1800 lumins of cool white with all accessories internally pre wired and including connecting up with twin core twisted copper conductor cable with suitable size complete all as specified and as directed. Make for Batten : Bajaj cat no BLRB DB 118 for 1x18 W LED / HAVELLS Cat no LHFYBYPNIAWO022 /SURYA Cat no SLE DB 18 LED ALPHA / PHILIPS / GE / Wipro Make for LED tube : Bajaj cat no BLRB 18 W CW / HAVELLS Cat no LHLDDAXEUL8ZO18/SURYA SLE TL DS 18P/ PHILIPS / GE / Wipro

S&F Exhaust fan 230 / 240 Volts AC single phase oscillating 300 mm sweep heavy duty with loures with specification of 1400 rpm, input watt-82W, current 0.35A, free airflow - 1950 cum/hour and noice level 45-50db complete all as specified and as directed. Make : Crompton Greaves / Bajaj / Usha

S & F LED Mirror Light 6K 1000 lumins 10 watts including taking down existing FTL fittings of any type complete all as specified and as directed. Make:Surya cat no SLE BTN 10 watts mirror light / Bajaj / Havells / Philips

M&L for point wiring with two runs of single core 1.5 Sq.mm. (Nominal area) PVC insulated unsheathed multistranded copper conductor cable FRLS (ISI marked) drawn through and including non metallic PVC conduit 20 mm bore medium grade (ISI marked) concealed / surface fitted type including Flush type metal GI boxes for fixing modular type switches, sockets, regulators etc. including provision of multistranded 1.5 Sq.mm copper conductor cable FRLS [ISI marked] as earth wire connected to common earth dolly and earth in distribution board including cutting of stone masonry / wall complete all as specified and as directed, for one light/exhaust fan/fan point/call bell controlled by one way switch. MAKE :(i) CABLE : Finolex, Polycab, Plaza, Gloster, Harsh all are ISI marked and FRLS cables (ii) PVC CONDUIT : AVON PLAST, PRECISON, FINOLEX [ALL ARE ISI MARKED]

S&F switch Modular type single pole 6 Amps One Way AC 230V, 50HZ supply 1 module complete all as specified and as directed. Make : Legrand / Crabtree / Anchor (Roma) / MK

S& F modular white cover plate with frame 2 module complete all as specified and as directed. Make : Legrand / Crabtree / Anchor (Roma) / MK

S& F modular white cover plate with frame 3 module complete all as specified and as directed. Make : Legrand / Crabtree / Anchor (Roma) / MK

S&F 2X2 surface mounted LED ceiling tile with broad collar frame light fitting including bulbs of 36 watts with all accessories complete all as specified and as directed. Make:Bajaj / Surya / Havells / Philips / Wipro / GE

S & F LED Mirror Light 6K 1000 lumins 10 watts complete all as specified and as directed. Make:Surya cat no SLE BTN 10 watts mirror light / Bajaj / Havells / Philips / Wipro / GE

M & L for Sub main wiring with 2 runs of 2.5 Sqmm PVC insulated FRLS Copper conductor cable including PVC conduit of 20mm dia along with one run of 2.5 Sq.mm FRLS copper cable for earth continuity conductor as earth lead and connecting to common earth dolly complete all as specified and as directed. Note: Two runs 2.5 Sq.mm. cable, one run of 2.5 Sq.mm cable and one run of PVC conduit shall be measured as one unit. MAKE :(i) CABLE : Finolex, Polycab, Plaza, Gloster, Harsh all are ISI marked and FRLS cables (ii) PVC CONDUIT : AVON PLAST, PRECISON, FINOLEX [ALL ARE ISI MARKED]

M & L for Sub main wiring with 2 runs of 4 Sqmm PVC insulated FRLS Copper conductor cable including PVC conduit of 20mm dia along with one run of 4 Sq.mm FRLS copper cable for earth continuity conductor as earth lead and connecting to common earth dolly complete all as specified and as directed. Note: Two runs 4 Sq.mm. cable, one run of 4 Sq.mm cable and one run of PVC conduit shall be measured as one unit. MAKE :(i) CABLE : Finolex, Polycab, Plaza, Gloster, Harsh all are ISI marked and FRLS cables (ii) PVC CONDUIT : AVON PLAST, PRECISON, FINOLEX [ALL ARE ISI MARKED]

CIVILEC ENGINEERING WORKS