PERIODICAL SERVICES TO SMQ, OMQ AND REPAIR TO PLASTERING AND OTHER MISC B/R WORKS AT AF-II UNDER GE (AF) JAMNAGAR NO.2

Amount

M & L for preparation of old plastered / unplastered surfaces of ceilings including cornices, pilasters, etc and applying one coat of white wash on ceilings complete all as specified and directed.

M&L for preparation of new plastered surfaces on ceilings and applying two coats of white wash complete all as specified and directed.

M & L for preparation of old plastered / unplastered surfaces of walls including cornices, pilasters, etc and applying one coat of white wash on walls complete all as specified and directed.

M & L for preparation of old distempered surfaces of wall by washing, rubbing down and stopping of distempered surfaces and applying one coat of oil bound distemper over a coat of chalk whiting (putty) on walls complete all as specified and directed.

M & L for preparation of new plastered surfaces of walls and applying two coats of oil bound distemper over a coat of chalk whiting ( putty ) complete all as specified and directed.

M & L for preparation of old existing treatment surfaces on wall and applying one coat of weather proof acrylic based emulsion paint (100% acrylic) complete all as specified and directed. Note : - Ht of bldg upto G + 2

M&L for preparation of new plastered surface of wall and applying two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre / 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre / 10 sqm any tint as approved complete all as specified and directed. Note : - Ht of bldg upto G + 2.

M&L for preparation of old painted wooden surface of any description not otherwise described over 10cm width or grith and applying one coat of synthetic enamel paint complete all as specified and directed.

M&L for preparation of old painted of steel or iron surfaces of any description not otherwise described over 10cm width or girth and applying one coat of Synthetic enamel paint complete all as specified and directed.

M&L for preparation of newly or untreated steel or iron surfaces of any description not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

M&L for repairing the edge / corner of chajja / roof projection and similar work by removing of old plaster width / girth exceeding 15 cm & n exc 30 cm and making good with 15 cm rendering in cement mortar 1:3 to match with existing surfaces complete all as specified and directed. Note : - Ht of bldg upto G + 2.

Demolition of brickwork or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stone work and precast concrete articles etc complete all as specified and directed.

M&L for Pre-cast cement concrete block masonary type C1 1:3:6, (using 20 mm graded stone aggregate) solid blocks , exc. 10 cm thick, in width (with plain and interlocking joints as directed) setting in cement mortar 1:6, in walls & pillars complete all as specified and directed.

Taking down cement or cement lime plaster, any description on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc. including raking out jouints, hacking for key, scrubbing down with water etc. complete all as specified and directed.

M & L for rendering 10 mm thick in cement mortar 1:6 over PCC block masonry wall surface, finished the surfaces even and smooth without using extra cement complete all as specified and directed.

M&L for rendering 15 mm thick on fair face of concrete surfaces in cement mortar (1:4), finished even and smooth without using extra cement complete all as specified and directed.

M&L for rendering 05 mm thick in cement mortar 1:3 on fair faces of concrete surfaces on ceilings finished even and smooth without using extra cement complete all as specified and directed.

Demolition concrete of any description and in any position not otherwise specifically provided for sunken floor and similar work all specified and directed.

M&L for plastic / PVC dividing strips, 38 x 1.5 mm thick and fixed in position with and including cement mortar 1:4 to confirm to design complete all as specified and directed.

M&L for 40mm thick PCC 1:2:4 type B0 (using 12.5 mm graded stone aggregate) as in flooring laid in panels finished even and smooth without using extra cement complete all as specified and directed.

M&L for 100 mm thick cement concrete 1:4:8, type D-2, (using 40 mm graded stone aggregate) as in sub base for path / flooring complete all as specified and directed.

M & L for Broken stone hardcore of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and directed.

M & L for 75 mm thick, plain cement concrete 1:3:6, type C-2 (using 40mm graded crushed stone aggregate) as in plinth protection etc, finishing surface even and smooth without using extra cement including making joints with bitumastic filling in proportion of bitumen and sand 1:3 by weight complete all as specified and directed. Note : The concrete shall be laid at a stretch n.exc 3.0 m in length and every turning/ corners.

Material & Labour for Machine pressed precast conctete interlocking paver block any shape and size as approved confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade, without correction factor for chamfering, made in rubber moulds with 0.50 mm thick scratch proof lacquer coating on top surface, with grey cement and pigment complete all as specified and directed.

M&L for sand filling (25mm thick sand screed bed) under floors or in foundations including watering and consolidation complete all as specified and directed.

M&L in repairs for filleting in any position and to any shape and the section of fillet exc. 25 sq cm but n exc. 50 sqcm in cement mortar 1:4 including all mitres, stops, etc. complete all as specified and directed.

M&L for rendering 10 mm thick on fair faces of brick work or concrete surfaces in cement mortat (1:3) using water proofing compound @ 3% by weight of cement finished even and fair as in sunken floor and wall complete all as specified and directed. Note: WPC will be measured and paid separetely.

M&L for applying two coats of water proofing coating by using Super Latex mixed in chemical water and cement ratio as per manufacturer's instructions both on floor as well as on walls of sunken complete all as specified and directed.

Supply only water proofing compound conforming to IS-2645 1975 complete all as specified and directed.

M &L for cement concrete type E-2 1:5:10 (using 40mm graded crushed stone aggregate) as in mass filling in sunken floor of toilets and similar work complete all as specified and directed.

Cutting / drilling hole in brick wall / RCC beam or slab exc 300mm deep of WC / bath by mechanical mean and fixing with and including 40mm GI pipe as spouts pipe of require length at site, complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing rubbish off the premises complete all as specified and directed.

M&L for joint free (edge cut) coloured glazed ceramic tiles 7 mm to 8 mm thick (square / rectangular) polished of size 350 x 250 x 7 mm / 450 x 350 x 7mm as in skirting / dado etc laid over and including 10 mm thick backing coat in cement mortar 1:4, set and jointed in neat cement slurry and pointed with coloured cement to match the tiles including electric fittings complete all as specified and directed.

M&L for cement concrete type B-1, 1:2:4 (using 12.5mm graded stone aggregate) 25mm thick as in levelling course of flooring & roof complete all as specified and directed.

M&L for non skid, (Joint Free) coloured ceremic tiles 7 to 8 mm thick (Square / rectanguler) polished area of each tile exceeding 0.11 sqm but not exeeding 0.18 sqm as in floors etc laid over and including 15 mm thick screed bed or bedding layer in cement mortar 1:6, set and jointed in neat cement slurry and pointed with coloured cement to match the tiles complete all as specified and directed.

M&L for non skid, joint free (edge cut) coloured ceramic tiles 7 to 8 mm thick (Square / rectangular) polished area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm as in floors etc laid over and including 15 mm thick screed bed or bedding layer in cement mortar 1:6, set and jointed in neat cement slurry and pointed with coloured cement to match the tiles complete all as specified and directed.

M&L for light shade colour vitrified ceramic tiles 10 mm thick (square / rectangular) polished, area of each tiles n.exc 0.36 sqm in floors etc laid over and including 15 mm thick screed bed or bedding layer in CM 1:6, set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

All as per item No.37 above but in skerting including 10 mm thick backing coat in cement mortar 1:4

Dismantling of granite, marble or kota stone slabs and granite tiles laid, bedded and pointed in any mortar of any description or thickness in floors, aprons cills or platform etc complete all as specified and directed.

M&L for granite work not less than 18 mm thick (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in coloured cement (1:2) using marble dust with admixture of pigment to match with granite shade, laid over and including 15 mm thick cement screed bed in CM 1:6 complete all as specified and directed.

M&L for machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete with need cement slurry, laid over and including 15 mm thick cement screed bed in CM 1:6 complete all as specified and directed.

M&L for rounding to edges of granite / kota stone slabs one edge, such as in steps cooking platform, and other similar situation all as directed.

Supply and fix in repairs 10 Litre capacity PVC syphonic action type flushing cistern low level with inlet ball valve, float, handle flush pipe of polyethylene of low or high density or PVC. 32 mm dia, for low level cistern, fixed in position and connecting complete all as specified and directed.

S&F in repair 450 mm long PVC connections 15 mm size with PTMT nuts complete all as specified and directed.

S&F for 600 mm long PVC connections 15 mm size with PTMT nuts complete all as specified and directed.

S&F in repair 15 mm size bib taps cast copper alloy, chromium plated, fancy type with capstan head, screwed down, screwed for iron pipes complete all as specified and directed.

S&F in repair 15 mm size angular cock/stop cock cast copper alloy, chromium plated, fancy type with capstan head, with long shank and cup (concealed type) screwed down, screwed both end for iron pipes complete all as specified and directed.

S&F in repair pillar taps cast copper alloy, chromium plated, screwed down high pressure with long screwed shanks and fly nuts, screwed for iron pipe complete all as specified and directed.

S&F in repairs stainless steel grating of size 150 mm x 150 mm fixed with cement complete all as specified and directed.

Taking up or down 15 mm bore steel tubing and connections including cleaning for refixing, complete all as specified and directed.

Taking up or down 20 mm bore steel tubing and connections including cleaning for refixing, complete all as specified and directed.

Taking up or down 25 mm bore steel tubing and connections including cleaning for refixing, complete all as specified and directed.

Supply and fix 15 mm bore galvanised steel water tubing, medium grade including necessary fittings such as GI bends, tee, union etc fixed on wall / floor and connecting to water supply pipe line complete all as specified and directed.

Supply and fix 20 mm bore galvanised steel water tubing, medium grade including necessary fittings such as GI bends, tee, union etc fixed on wall / floor and connecting to water supply pipe line complete all as specified and directed.

Supply and fix 25 mm bore galvanised steel water tubing, medium grade including necessary fittings such as GI bends, tee, union etc fixed on wall / floor and connecting to water supply pipe line complete all as specified and directed.

Fixing only 15mm bore steel tubing, medium grade, laid in floor or fixed to walls, ceilings etc. with fittings and fixures using old pipe including cutting, threading complete all as specified and directed.

Fixing only 20mm bore steel tubing, medium grade, laid in floor or fixed to walls, ceilings etc. with fittings and fixures using old pipe including cutting, threading etc complete all as specified and directed.

S&F in repairs shower arm 15 mm size, 195mm long with bend of 45 degree with flange of PTMT any colour (minimum weight 40gms) complete all as specified and directed.

S&F in repairs swivel shower of PTMT any colour for fixing with 15mm pipe (minimum weight 40 gms) complete all as specified and directed.

S&F in repairs 20 mm size ball valve high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed (minimum weight 20 mm-210 gms) and fly nut complete screwed for iron pipe and fixed complete all as specified and directed.

S&F in repairs 25 mm size ball valve high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed (minimum weight 25 mm-455 gms) and fly nut complete screwed for iron pipe and fixed complete all as specified and directed.

S&F in repairs sinks made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and waste pipe; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm complete all as specified and directed.

S&F in repairs sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and directed.

S&F in repair Plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified and directed.

S&F in repair water storage tank covers of any size at any height complete all as specified and directed.

S&F rotational moulded polyethylene water storage tanks of 500 litre capacity tripple layer. (cylindrical vertical with closed top) hoisted and fixed in position, including all fitting such as connection, nipple etc including dismantling the existing tank complete all as specified and directed.

S&F rotational moulded polyethylene water storage tanks of 1000 litre capacity tripple layer. (cylindrical vertical with closed top) hoisted and fixed in position, including all fitting such as connection, nipple etc including dismantling the existing tank complete all as specified and directed.

S&F mild steel framed work such as grills gratings etc with ends of bars shouldered and / or riveted or forged into spikes framed guard bars barred iron doors ladders framed balusters walkways railings framework of water tanks and similar work conforming to Fe 290 Grade E-165.

Dismentling wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards / slabs / blankets, any thickness, including cover fillets complete all as specified and directed.

M&L for Gypsum Board 9 mm thick for seamless false ceiling fixed with screw over and including Gl frame work comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre / intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre and including applying two coat of distemper oil emulsion over one coat of primer over ceiling surface after perparation of surface complete as per manufacturer instruction.

S&F in repairs brass CP wall mixer for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and directed.

M&L for writing letters or figures (Block.Roman, Italic or Indian) n exc. 30 cm high shall be painted with thick paint, so that they stand out boldly and solidly without showing signs of brush marks, & painted till satisfaction of Engr-in-Charge complete all as specified and directed.

M&L for writing letters Stops, commas, short lines, dashes, hyphens, brackets, etc shall be painted with thick paint, so that they stand out boldly and solidly without showing signs of brush marks and painted till satisfaction of Engr-in-charge complete all as specified and directed.

Taking down chowkhat or frame with shutter (without taking off shutter from the frame) area exc 1.5 Sqm but n.exc 4 Sqm each, complete all as specified and directed.

S&F aluminium anodised frame for doors, windows, ventilators one or more rebated including joining cleat for fixing etc complete all as specified and directed.

S&F aluminium door shutters, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber neoprene packing handle 2 nos in each door, hinges and anodised aluminium snap beading screws with 5.5mm sheet glass, ordinary quality and glazing with oil putty in square exc 0.5 sqm in each pane complete all as specified and directed.

S&F in repairs door closer hydraulically regulated, cast iron body, designation No.2 universal type, suitable for door shutters of weight between 36 to 60kg and fixed complete all as specified and directed.

S&F in repairs floor door stopper 140 mm cover plate of aluminium alloy body, double leg type with hard rubber shoe fixed to door complete all as specified and directed.

mahavir industries

S t modi

kudrat enterprise

MADHAV ENTERPRISE

KRISHNA ENTERPRISE

M/S Rajendra Constructions

suvidhiconstruction

JAY DWARAKDHISH ENTERPRISE