KMC/EEC/VIII/070/02/26-27/R

BUILDING WORKS (B) DISMANTLING, CUTTING CHASE, HOLES ETC 10. Stripping off worn out plaster and raking out joints of walls, celings etc. upto any height and in any floor including removing rubbish within a lead of 75m as directed.

SECTION 1. ------------BUILDING WORKS (I) PLASTERING, POINTING ETC. A. ORIGINAL WORKS 1.Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding/staging where necessary (Ground floor).[Excluding cost of chipping over concrete surface] i) With 1:6 cement mortar (c) 15 mm thick plaster(3rd Corrigenda & addenda dated 04.06.2018)

SECTION 1. ------------BUILDING WORKS (I) PLASTERING, POINTING ETC. A. ORIGINAL WORKS 1.PLASTER (TO WALL, FLOOR, CEILING ETC.) WITH SAND AND CEMENT MORTAR INCLUDING ROUNDING OFF OR CHAMFERING CORNERS AS DIRECTED AND RAKING OUT JOINTS INCLUDING THROATING, NOSING AND DRIP COURSE, SCAFFOLDING/STAGING WHERE NECESSARY.[EXCLUDING COST OF CHIPPING OVER CONCRETE SURFACE](C) 15 MM THICK PLASTER(INTERNAL) 1:6 IN SUPERSTRUCTURE (A) 1ST FLOOR.

SECTION 1. ------------BUILDING WORKS (I) PLASTERING, POINTING ETC. A. ORIGINAL WORKS 1.PLASTER (TO WALL, FLOOR, CEILING ETC.) WITH SAND AND CEMENT MORTAR INCLUDING ROUNDING OFF OR CHAMFERING CORNERS AS DIRECTED AND RAKING OUT JOINTS INCLUDING THROATING, NOSING AND DRIP COURSE, SCAFFOLDING/STAGING WHERE NECESSARY.[EXCLUDING COST OF CHIPPING OVER CONCRETE SURFACE](C) 15 MM THICK PLASTER(INTERNAL) 1:6 IN SUPERSTRUCTURE (A) 2ND FLOOR.

BUILDING WORKS (B) DISMANTLING, CUTTING CHASE, HOLES ETC 6. Dismantling artificial stone flooring upto 50 mm. thick by carefully chiselling without damaging the base and removing rubbish as directed within a lead of 75 m. a) In ground floor including roof.

BUILDING WORKS (D) FLOORING A. ORIGINAL WORKS 35. SUPPLYING, FITTING & FIXING 1ST QUALITY CERAMIC TILES IN WALLS AND FLOORS TO MATCH WITH THE EXISTING WORK & 4 NOS. OF KEY STONES (10MM) FIXED WITH ARALDITE AT THE BACK OF EACH TILE & FINISHING THE JOINTS WITH WHITE CEMENT MIXED WITH COLOURING OXIDE IF REQUIRED TO MATCH THE COLOUR OF TILES INCLUDING ROUGHENING OF CONCRETE SURFACE, IF NECESSARY OR BY SYNTHETIC ADHESIVE & GROUT MATERIALS ETC. (A) FLOOR WITH SAND CEMENT MORTAR (1:4) 20 MM THICK & 2 MM THICK CEMENT SLURRY AT BACK SIDE OF TILES USING CEMENT @ 2.91 KG/SQ.M & JOINT FILLING USING WHITE CEMENT SLURRY @0.20KG/SQ.M. (A) AREA OF EACH TILE UPTO 0.09 SQ.M (I) COLOURED DECORATIVE NOTE: 2. ADD EXTRA FOR EACH ADDL, FLOOR OVER THE RATE FOR ITEM 35 & 36 OF SUBHEAD A.(I) UPTO 4 TH FLOOR-RS 5/ SQ.M (I) ABOVE 4 TH FLOOR-RS 6.25/ SQ.M (3RD CORRIGENDA & ADDENDA DATED 04.06.2018)FOR SECOND FLOOR

SECTION 1. ------------BUILDING WORKS (K) PAINTING, VERNISHING ETC A. ORIGINAL WORKS 1 (a) Priming one coat on steel or other metal surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc (This item is applicable to new work or old work when the original surface has been exposed by removal of old paint.)

BUILDING WORKS (K) PAINTING, VERNISHING ETC?(A) ORIGINAL WORKS.(2)(A) Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface, if necessary :(b) On steel or other metal surface : With other than hi-gloss of approved quality-(iv) Two coats (with any shade except white)

BUILDING WORKS (K) PAINTING, VERNISHING ETC?(B)MISCELLANEOUS ITEMS.(1)Removing loose scales, blisters etc. from old painted surface and thoroughly smoothening the surface to make the same suitable for receiving fresh coat of paint.N.B:(Payment against item (1, 2, 3, 4) of subhead B will be made only when done at specific direction of the Engineer- in-charge. Cost of taking out shutter etc.for this item and rehanging the same or changing glass panes cracked or broken in the operation will be deemed to be covered by the rate of this item and no seperate payment therefore shall be made.)

SECTION 1. ------------BUILDING WORKS (J)WHITE WASH, COLOUR WASH, DISTEMPER A. ORIGINAL WORKS 7 Applying Interior grade Acrylic Primer of approved quality and brand on plastered or cencrete surface old or new surface to receive Distemper/ Acrylic emulsion paint including scraping and preparing the surface throughly, complete as per manufacturer's specification and as per direction of the EIC. (In Ground Floor) (a) One Coat ii) Solvent based interior grade Acrylic Primer.[This item to be done under specific instruction of the Superintending Engineer]