SPECIAL REPAIR TO SEPTIC TANK AND SOAKAGE WELL OF 314 FD HOSP AND 4 X MD ACCN P-70 AT SURYA LINE OF 14 RSR (A) AT CLEMENT TOWN, DEHRADUN.

Amount

M&L for Non Skid coloured ceramic tiles 10mm thick (square/ rectangular) area of each tiles exc 0.18 Sqm but n. exc 0.38 Sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed of cement mortar 1:6 complete all as specified and directed.

M&L for Non Skid coloured ceramic tiles 10mm thick (square/ rectangular) area of each tiles exc 0.18 Sqm but n. exc 0.38 Sqm as in vertical surface such as dado/ skirting etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10mm thick rendering in CM 1:4 to recieve tiles complete all as specified and directed

M&L for Non Skid coloured ceramic tiles 7 to 8mm thick (square/ rectangular) area of each tiles exc 0.06 Sqm but n. exc 0.11 Sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed of cement mortar 1:6 complete all as specified and directed

M&L for coloured Glazed ceramic tiles in vertical surfaces 450 x 300 x 6 - 7mm thick set and jointed in neat cement slurry and pointed with white or coloured cement over 10mm thick rendering or bedding layer of cement mortar 1:4 complete all as specified and directed

M&L for RCC 1:2:4 type B1 (using 20mm graded stone aggregate) as in slab and shelves supported on walls and in Chajja projection complete all as specified and directed.

M&L form work to soffits of suspended slab such as roof slab and similar work n. exc 200mm thick (horizontal or sloping) rough finished flat surface complete all as specified and directed.

M&L for mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed

M&L Baroda green marble 14 -16 mm thick (table rubbed and polished) in step, jambs, pillars , window cills, cooking plateforms and the like in CM 1:4 incl pointing in white cement 1:2 using marble dust with admixture of pigment to match with marble including half round moulding and making hole for gas pipe over 15mm thick screed bed in CM 1:6 complete all as specified and directed

M&L for brick work with sub class 'B' old size bricks straight or curved on plan exc 6m mean radius built in CM 1:6 complete all as specified and directed

S&F 18/19mm thick plywood, grade BWP, type BB including both side 0.9mm thick decorative laminate type 1, of surface finish, colour and pattern as approved, fixed with approved adhesive as per manufacturer's instructions, fixed with screws as in cupboard shutters and shelves complete all as specified and directed.

S&F 150mm Hasp and staple, mild steel, wire type, stove enamelled black, including bolt to hinge plate and fixed with screws complete all as specified and directed.

S&F Continuous (Piano) hinges, mild steel, bright finished or electro galvanized, width of flaps (When open) 30mm complete all as specified and directed.

Taking down chowkhats or frames area n. exc 1.50 Sqm each with shutters (without taking off shutters from the frames) complete all as specified and directed

Taking down Chowkats exc 1.5 Sqm but n. exc 4 Sqm each with shutters (Without taking off shutters from the frame) complete all as specified and directed

Taking down shutter of any description exc 1 Sqm but n. exc 2 sqm each complete all as specified and directed

M&L for PCC 1:3:6 type C1 (using 20mm graded aggregate stone aggregate) as in hold fast blocks including all form work complete all as specified and as directed

S&F framed work as in doors or gates, windows, ventilators of angle/rectangular or square hollow section or other section with gusset plates, rails, braces etc complete, drilled for fixing of steel sheeting or other covering doors, windows, ventilators etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door, window, ventilator fittings and hanging, also fastening and fixing conforming to Fe 410-W (Gde-E-250) quality 'A' complete all as specified and directed.

S&F mild steel bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required hooks (stay), heavy, for large gates, hook and pintle hinges, large hasps and staples, chains, hand made sliding bolts, clamps, hold fasts, wall ties, hooks for hanging, fans, plain angle cleats for securing purlins to wood trusses or rafters, knee piece inserts, two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165 complete all as specified and directed.

S&F mild steel roof trusses (framed), trrussed, purlins, crane gantries, rails and fastenings and heavy bracket framming (Beam,Tee, Angle, Channels or flate sections) including distance pieces, cleats etc conforming to Fe410-W (Gde-E-250) quality-A complete all as specified and directed.

S&F welded steel wire fabric weight n. exc 4 Kg per Sqm suitable to weld with steel members complete all as specified and directed.

S&F 30mm thick flush shutter solid core construction with block board core and ply wood face panels, commercial type both sides complete all as specified and directed. Make : Green/Century ply

S&F 30mm thick 2nd class hard wood factory made glazed and skelton shutter, open rebated and prepaned to receive glass, gauge etc (without sash bars) edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc sizes of members of shutters complete all as specified and directed.

S&F galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks or galvanized wire staples complete all as specifed and directed

M&L for applying two coats of synthetic enamel paint to new undecorated wooden surfaces over a coat of pink primer including preparation, over 10cm width or girth complete all as specified and directed.

M&L for preparation of old painted surfaces of wood and wood based surfaces of any description, not otherwise described and applying one coat of synthetic enamel paints over 10cm width or girth complete all as specified and directed.

S&F window/ventilator prepainted section of frame 72x55mm fixed to wall or concrete surface with rawl plugs made of galvanised steel powder coated and section of shutter 47x20mm, mulion section 72x50mm (Base steel as per IS 513 "D" quality galvanized as per IS 277 with zinc of 120 gms/Sqm) glazed and wire gauge shutter prepared to receive wiremesh to the shutter (Double door shutter) with total coated thickness of 0.6mm including grills/guard bars made made of 10mm square bars powder coated fixed to window frame with screws at 150mm c/c both ways, 4 mm thick sheet glass, 0.36mm stainless steel wire cloth ieht 1.4mm aperture and necessary fittings and all builders hardware such as handles, tower bolts & stays etc complete all as specified and as directed Make : NCL/equivalent (type-4000 series)

M&L for preparation of new steel surfaces of any description, over 10cm width or girth, not otherwise described and applying two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

M&L for preparation of old painted steel surfaces of any description, over 10cm width or girth, not otherwise described and applying two coat of synthetic enamel paint complete all as specified and directed.

S&F in repair vitreous china white wash hand basin flat back of size 550x400mm including CI/MS brackets including cutting for and pinning in brackets but including waste fittings complete all as specified and directed.

M&L for machine cut Kota stone slab 18-20 mm thick as in floor/ treads of steps laid over and including 15mm thick screed in CM 1:6, set & jointed with grey cement slurry and pointed in white cement mixed with pigment to match the shade of the slab including cutting, rubbing and mirror polishing incl rounding the edges complete incl demolition of cement concrete 40 mm thick as in floor complete all as specified and directed.

M&L for machine cut Kota stone slab 10-12 mm thick as in risers to steps, skiting/dado, pillars, window cills and the like, laid over and including 10mm thick rendering in cement mortar 1:4, set & jointed with grey cement slurry and pointed in white cement mixed with pigment to match the shade of the slab including cutting, rubbing and polishing incl taking down cement plaster on brick or concrete surfaces complete all as specified and directed

M&L for rubber moulded coloured glossy finish cement concrete chequered tiles of size 30cm X 30cm X 20mm thick jointed in neat cement slurry and pointed in white or coloured cement to match the surface of tile as in floor over 75mm thick PCC 1:4:8 type D2 complete all as specified and directed

S&F solid PVC door frame of size 50mm x 47mm made out of 5mm single side prelam PVC sheet and edges will be painted to match with the prelam sheet reinforced with MS square tube in opening incl necessary fixing arrangements as per specification and drawing complete all as specified and directed

S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top and bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and both side prelam PVC sheet for top rail, lock rail and bottom rail on either side as gap insert for top rails, bottom rail, panelling of both side prelam PVC sheet to be fitting in the MS frame welded/sealed to the stiles and rails with suitable PVC sheet beading and joined together with solvent cement in the frame at site as per specification and drawing Make : Rajshree

S&F 300mm Mild steel sliding door bolts, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate complete all as specified and directed.

S&F 100mm size mild steel butt hinges medium weight, cold rolled complete all as specified and directed.

S&F 200mm long mild steel barrel tower bolts, stove enamelled black, with bright bolt complete all as specified and directed.

S&F 150mm aluminium, anodised, barrel tower bolts of extruded section complete all as specified and directed.

S&F extruded aluminium alloy handle of size 150mm, fabricated type, anodised complete all as specified and directed.

S&F mild steel 160mm, ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed.

S&F floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor 140mm overall length of cover plate complete all as specified and directed.

M&L for 75mm thick PCC 1:3:6 type C2 (Using 40mm graded stone aggregate) as in plinth protection/path laid in panels, finish the top surfaces even and smooth complete all as specified and directed

S&F 25mm dia drapery rod fancy powder coated wooden finish fixed to wall with wooden finale and brackets complete all as specified and directed.

M&L for 15mm thick plaster in CM 1:4 on fair face of brick walls finished even and smooth without using extra cement incl taking down cement plaster of any description on brick work or stone msonary wall including racking of joints hacking for key scrubbing down with water etc complete all as specified and directed.

M&L for applying two coats of weather proof exterior emulsion paint (Apex) after preparation of newly plastered/concrete surfaces on wall complete all as specified and directed.

M&L for applying two coats of weather proof exterior emulsion paint (Apex) after complete removal of existing treatment including preparation of old plastered/concrete surfaces on wall complete all as specified and directed.

M&L for 15mm thick plaster in CM 1:6 on fair face of brick walls finished even and smooth without using extra cement incl taking down cement plaster of any description on brick work or stone masonary wall including racking of joints hacking for key scrubbing down with water etc complete all as specified and directed.

M&L for preparation of newly plastered surface of wall and applying two coats of oil bound distemper of approved tint over a coat of wall care putty complete all as specified and directed

M&L for applying two coat of oil bound distemper of approved tint over a coat of wall care putty on walls after complete removal of existing treatment complete all as specified and directed

M&L for 5mm thick plaster in ceiling of CM 1:3 on concrete surfaces finished even and smooth without using extra cement incl taking down cement plaster from ceiling including scrubbing down with water etc complete all as specified and directed.

M&L for preparation of newly plastered surface of ceiling and applying two coats of oil bound distemper of approved tint over a coat of wall care putty on ceiling complete all as specified and directed

M&L for applying two coats of oil bound distemper of approved tint over a coat of wall care putty on ceiling after complete removal of existing treatment complete all as specified and directed

S&F for 15mm bore dia of medium grade galvanised steel tubing with all fittings and fixed complete to wall or laid in floor incl taking up or down 15mm dia bore of galvanised iron steel tubing and connections including cleaning for refixing, cutting in wall/floor complete all as specified and directed.

S&F for 20mm bore dia of medium grade galvanised steel tubing with all fittings and fixed complete to wall or laid in floor incl taking up or down 20mm dia bore of galvanised iron steel tubing and connections including cleaning for refixing, cutting in wall/floor complete all as specified and directed.

S&F 20mm bore gun matel globe or gate valve with iron wheel, screwed both ends for iron pipes complete all as specified and directed.

S&F in repair triple layer rotational moulded PVC water storage tank cylinderical, vertical with closed top hoisted and fixed in position tank capacity 500 Ltr with and including PTMT float valve 20mm dia and making connection for inlet and outlet including dismantling of 500 Ltr capacity PVC water tank complete all as specified and directed

S&F 15mm dia brass chromium plated Bib tap fancy type with wall flange complete all as specified and directed.

S&F 15mm Stop valve angle cock fancy type, chromium plated with long shunk and cup (concealed type) high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for union complete all as specified and directed.

S&F 15mm dia brass chromium plated pillar tap long body with fly nut capstan head screwed for 15mm bore dia of pipe complete all as specified and directed.

S&F chromium plated brass shower roses with or without swivel joints 125mm size including shower arm complete all as specified and directed.

S&F in repair vitreous china water closet Orissa pattern of size 580 X440mm white ISI marked including provn of cement concrete bedding including connections to flushing cistern/pipe and making good disturbed portion to match existing surfaces complete all as specified and directed. Make : Hindware/Parryware

S&F PVC white low level flushing cistern 10 ltr capacity with all fittings syphonic action push type with inlet ball valve, float and handle including bracket including flush pipe of polyethylene of low or high density or PVC, 32mm dia for low level cistern etc complete all as specified and directed

S&F of sinks made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes, including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 495mm x 420mm and bowl size 410mm x 330mm x160mm complete all as specified and directed.

S&FPVC connection 15mm bore dia 450mm long with 2 Nos PTMT nuts with washer complete all as specified and directed.

S&F PVC waste pipe 32/40 mm dia complete all as specified and directed

S&F 20 mm dia brass CP tubular towel rail D type 600mm long complete all as specified and directed.

S&F acrylic glass corner shelf with CP brass railing size not less than 300mm long and fix to wall with rawl plug and CP screws complete all as specified and directed

M&L 25mm thick PCC 1:2:4 type B0 (using 12.5mm graded stone aggregate) as in roof padding finish surface even and smooth without using extra cement including mixed with water proofing compound @ 3% by wt of cement incl demolition of PCC in any description complete all as specified and directed (Note : Water proofing compound will be measured and paid separately)

Supply only integral water proofing compound complete all as specified and directed.

M&L 100mm dia cast iron soil, waste and vent pipe spun pipes any length with or without ears with cement joints fixed to walls or laid in trenches complete all as specified and directed

M&L 75mm dia cast iron soil, waste and vent pipe spun pipes any length with or without ears with cement joints fixed to walls or laid in trenches complete all as specified and directed

M&L 50mm dia cast iron soil, waste and vent pipe spun pipes any length with or without ears with cement joints fixed to walls or laid in trenches complete all as specified and directed

S&F cast iron 'P' Traps 100mm bore complete all as specified and directed.

S&F 100mm bore cast iron bends (any radius ), diminishing pieces or tapers complete all as specified and directed.

S&F 100mm bore cast iron tee (any radius ), diminishing pieces or tapers fitted with oval access doors complete all as specified and directed.

S&F 75mm bore cast iron bends (any radius ), diminishing pieces or tapers fitted with oval acceess doors complete all as specified and directed.

S&F cast iron floor trap with grating including jointing waste pipe in runlead 75mm dia fixed in cement concrete type B1 (1:2:4) and SS gratings complete all as specified and directed.

S&F Cast iron cowls 50mm complete all as specified and directed.

Excavation in trenches n. exc 1.5m wide and n. exc 1.5m in depth in any type of soil for foundation, etc or for shafts, wells, cesspits, manholes, pierholes, etc and getting out complete all as specified and directed

Excavation over areas, n. exc 1.5m deep and getting out in any type of soil complete all as specified and directed

Excavation over areas, exc 1.5m deep but n. exc 3m deep and getting out in any type od soil complete all as specified and directed

M&L for returning filling in any type of soil including spreading levelling watering and well ramming in layers n. exc 25cm thick complete all as specified and directed

M&L for removing excavated material (any type of soil) to a distance n. exc 50m and depositing where directed at a level n. exc 1.5m above the starting point complete all as specified and directed

S&F 150mm internal dia of pipe salt glazed stoneware drain pipes grade 'A', laid in trenches and jointed in CM 1:1, incl demolition and breaking up drain pipes (SGSW) of 150mm bore complete all as specified and directed

M&L for concrete bed in PCC 1:3:6 type C2 (using 40mm graded stone aggregate) as in bed to drain pipes including packing under and haunching against the sides of pipes after they are laid and tested for 150mm bore pipe complete all as specified and directed

M&L for cutting into existing manholes for connecting new drains 150mm dia making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B1 smooth finished and reforming benching as required complete all as specified and directed

M&L Cement concrete 1:4:8 type D2 (using 40mm graded stone aggregate) as in foundations or mass concrete complete all as specified and directed

M&L for PCC 1:2:4 type B2 (using 40 mm graded stone aggregate) as in foundation, filling and mass concrete complete all as specified and directed

M&L for PCC 1:2:4 type B2 (using 40mm graded stone aggregate) in surface channels and drains and finished the surface even and fair complete all as specified and directed

M&L for PCC 1:2:4 type B1 (using 20mm graded stone aggregate) as in coping including necessary form work complete all as specified and directed

M&L for honey comb brick work with sub class 'B' in one brick thick old size bricks straight or curved on plan n. exc 6m mean redius built in CM 1:4 complete all as specified and directed

M&L for loose filling of broken brick bats of gauge 80 to 150 mm as in soakage pits, soakage wells complete all as specified and directed

M&L for rendering 15mm thick in CM 1:4 on brick or concrete surfaces with using WPC @3% by weight of cement, finishing the surface even and smooth without using extra cement complete all as specified and directed Note : Water proofing compound will be measured and paid separately

Extra for forming fair finished drain or channel 30cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends etc complete all as specified and as directed

M&L for RCC 1:2:4 type B1 (using 20mm graded stone agg) as in slab and shelves supported on walls, beams and columns complete all as specified and directed

M&L for formwork for roughed finished surface of concrete to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n. exc 20 cm wide and sides of RCC/PCC bands in walls, horizontal or sloping and similar work exc 10 cm but n. exc 20 cm wide complete all as specified and directed.

M&L for reinforced precast cement concrete 1:2:4 type B1 (using 20mm graded stone aggregate) as in landings, cover slabs (for manholes etc), shelves and similar articles with plain faces including necessary form work, set in CM 1:4 complete all as specified and directed Note : Reinforcement shall be measured and paid for separately.

M&L for mild steel TMT bars 6mm to 8mm dia, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed

Demolition in cement concrete (unreinforced) in ground floor and pavings n. exc 15cm thickness (below or above ground level) complete all as specified and directed.

M&L for rubber moulded coloured glossy finish cement concrete chequered tiles of size 30cm X 30cm X 20mm thick jointed in neat cement slurry and pointed in white or coloured cement to match the surface of tile as in floor over 75mm thick PCC 1:4:8 type D2 complete all as specified and directed

S&F Cast iron cowls 75mm complete all as specified and directed.

M&L for reinforced concrete pipes 300mm bore dia, class NP2, laid and jointed complete with collars complete all as specified and directed.

M&L for cement concrete 1:3:6 type C2 (using 40mm graded aggregate) as in bed with thickness of bed below the barrel of pipe as 150mm and width of bed as 600mm to drain pipes of 300mm internal dia including packing under, and haunching against the sides of pipes after they are laid and tested complete all as specified and directed.

Dismantling and taking down carefully U/S copper / aluminium point wiring (light, fan, socket, power) complete fitting such as switches, ceiling roses, pendants, lamp holder, light fitting etc including CI/Pressed steel terminals, switch box, and making good the disturbed surface of wall/floor etc, to match with the existing surfaces of wall/floor complete all as specified & directed.

Dismantling and taking down carefully sub-main wiring/service wire of any size including wooden batten etc and making good the disturbed surfaces of wall/floor to match with the existing wall/floor etc. complete all as specified and directed.

Dismantling and taking down carefully existing DB’s any type and making good the disturbed surfaces of wall/floor to match with the existing wall/floor etc. complete all as specified and directed.

Material and labour for point wiring with 1.5 sq mm PVC insulated, unsheathed, stranded copper conductor (FRLS) cable single core 1100 Volt grade in and including rigid PVC conduit medium grade 20mm dia or more ISI Marked concealed conduit and conduit accessories and cutting chases of suitable girth where required on brick/concrete surface & making good disturbed surface,provision of CI/Pressed steel terminal switch box with plastic laminated sheet 3 mm thick fixed with brass screw and washers along with 1.5 sq mm PVC insulated unsheathed stranded copper conductor cable ( FRLS ) as earth wire connected with main common earth dolly complete all as specified and directed for the following :-

One light/fan/bell/exhaust fan point controlled by one, one-way Piano type switch 5 Amp.

One 3pin 5 Amps socket out let on same board controlled by one, one-way Piano type switch complete all specified and directed.

One 3pin 5 Amps socket out let on independent board controlled by one, one-way Piano type switch complete all specified and directed .

All as per item No 108 above but with 2.5 Sqmm PVC insulated FRLS cable for 15 Amps power point complete all as specified and directed.

Supply and fixing switch piano flush type single pole, one-way 5 Amps, 240 Volts AC complete all as specified and directed.

Supply and fixing switch piano flush single pole, one-way 15 Amp, 240 Volts AC complete all as specified and directed.

Supply and fixing bell push piano flush type single pole one way 5 Amps complete all as specified and directed.

Supply and fixing socket out let 3 pin 5 Amps flush type complete all as specified and directed.

Supply and fixing in repair socket out let 2 in 1,3 pin , 5 Amp and 15 Amp flush type (multi) complete all as specified and directed.

Supply and fixing buzzer ding dong AC 230/240 Volts single pole complete all as specified and directed.

Supply and fixing in repair stepped type electronic fan regulator flush socketed type complete all as specified and directed. Make -Anchor/C&S/CONA

Supply and fixing ceiling rose 3 terminals PVC / Polycarbonate, isolated body complete all as specified and directed.

Supply and fixing batton/angle holder insulated bodywith back plate suitable for batten fittings complete all as specified and directed.

Taking out ceiling fan from existing building again refixing the same ceiling fan connecting up including provision of cable flexible 3 core of suitable size wire from ceiling rose to connect fan complete all as specified and directed.

S& F in repair wall mounted LED batten Box type fitting Blu colour end caps pre-wired LED fitting all as per cat part No DMLN 1 LT 8-16 with & including LED T8 tubular lamp of Cat part No LGT8-20-865-2 OF MAKE Crompton or equivalent make in philips / Havells / C&S.

S& F in repair oval shape Bulk head Edge-lit LED fitting comprising with high brightness LED 10 watt, IP-67 protection all as per cat part No- LBHP-10-CDL of make Crompton / or equivalent make in philips / Havells / C&S.

Supply and fixing sheet metal enclosure double door type for MCBs DB SPN(Single pole and neutral) 240V AC 8 way with 200 Amps rated busbar all as specified and directed .Make- legrand/ Hair/ Schnider

Supply and fixing in repair MCB 6 to 32 Amp 'C' series 10 KA repturing capacity complete all as specified and directed. Make legrand / Hair, Schnider

Supply and fixing MCB isolator SPN 40 Amp 240 V AC 10 KA repturing capacity complete all as specified and directed.

Supply and fixing sub main wiring two single core 6 sq mm PVC insulated unsheathed stranded copper conductor cable ( FR ) 1100Volts grade drawn in & including rigid PVC conduit 20mm dia or more medium grade concealed in wall along with 6.00 Sq mm PVC insulated unsheathed copper conductor cable (FR ) as earth wire and wire connected with main earth dolly including cutting chasing and making good disturbed portion complete all as specified and directed.

Supply and fixing single pole and neutral enclosure with a two pole and earth plug socket complete with one, single pole MCB 20 Amps 10 KA repturing capacity 240 Volts AC complete all as specified and directed. Make -Legrand, Hair, Schnider

S&F exhaust fan plastic body 300 mm sweep complete with all fittings .Make- Bajaj/Havells/Cromption

M&L for electric meter box of size 0.90x0.70x0.25 mtr made out of 2.0mm thick CRCA sheet with powder coated including fixing of 40 Amps MCB, DP - 04 Nos (One no MCB DP for individual meter) and MCCB 4 pole 125 Amp rating,25 KA - 01 No, TPN Busbar of rating 200 Amps for main incoming including RYB 3 phase indication including all necessary connection by providing aluminium lug of suitable size, complete all as specified and directed.

M&L for earthing complete with galvanished steel earth plate electrode 600x600x6.0 mm thick buried directly in ground and earth pit not less than 2.25 mtr deep below NGL and top edge of the plate not less than 1.5 Mtr deep below NGL, surrounded with adequate qty of char coal dust mixed with salt to a packed thickness not less than 15 Cm on all sides of earth plate incl excavation, earth work, returning filling in , removal of surplus soil to a distance in n.exc. 50 mtr incl GI wire 4mm dia nut bolts etc to earth plate one end connected to continuous earth wire incl GI pipe watering light grade with CI funnel and wire mesh and PCC 1:2:4 type B-1 as in pit chamber and RCC pit cover 50mm thick precast RCC 1:2:4 type B-1 duly re-enforced with MS bar 6mm dia @ 150mm C/C both ways with 10mm dia MS bar lifting handles, all as described in electric plate No. 3 of SSR part-I complete all as specified and directed. NOTES :- 1. For the items for which specifications not mentioned any where in the tender, the BIS specifications shall be followed. 2. Unless otherwise specified the rates for PCC/RCC shall deemed to include the cost of formwork shuttering etc., required for complete and proper execution of the work. Refer Schedule "A" notes for details.

Nanda Brothers

M/S Manmohan Singh Anand

P K ASSOCIATES

RADHA ENTERPRISES