COMPREHENSIVE REPAIRS TO TOILET BLOCKS OF CERTAIN OTM ACCN AT BINNAGURI MIL STATION UNDER GE (SOUTH) BINNAGURI

Amount

S&F in repair vitreous china squatting pan of "Orissa" pattern size 580 x440mm white with integral foot rests including connection to trap and to flushing pipe anti syphonage pipe etc complete and making good to floor complete all as specified and directed.

S&F in repair of PVC low level syphonic action flushing cistern of 10 lit capacity including siphon, PVC float with ball valve, rubber cone and flush pipe,Brackets,32mm bore PVC connection pipe etc complete all as specified and directed.

S&F in repair Vitreous china wash basin, white, flat back, size 550 x 400 mm, including pair of brackets and cutting and pinning in ends of brackets,32mm dia and 75 to 100mm long CP waste Coupling,32mm dia and 450 mm long Waste pipe, complete all as specified and directed.

M&L in repair for Vitreous China urinals, half stall type flat back size of 465 x 355 x 265 mm white (minimum) with grating and union for discharge pipe complete and providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60 mm long brass screws, pointing around urinal back in cement including 32mm dia and 75 to 100mm long CP waste Coupling,32mm dia and 450 mm long Waste pipe, complete all as specified and directed.(Make- Hindware/Parryware/Kohler)

S & F in repair brass chromium plated shower rose with arm 75 mm size with or without swivel joints including fixing to complete all as specified and as directed.`

S&F of pillar taps 15mm bore, fancy type, cast copper alloy with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts, screwed for iron pipe or for brass ferrule complete all as specified and directed. (Make : Jaquar CQT 23123 / Marc cat No-8114 or equivallent of Roca.)

S & F 15 mm dia bib tap cast copper alloy (fency type), chromium plated, with crutch or butterfly handle, screwed down for iron pipe or for brass ferrule all as specified and as directed. (Make : Jaquar/ Kohler/ Marc)

S&F in repair stop valves fancy type cast copper alloy, chromium plated for 15mm bore pipe, screwed both ends including necessary fittings all complete as specified and as directed. (Make : Jaquar/ Kohler/ Marc)

S&F in repair stop valves angular type cast copper alloy, chromium plated for 15mm bore pipe, screwed both ends including necessary fittings all complete as specified and as directed. (Make : Jaquar/ Kohler/ Marc)

S&F in repairs shelf of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 300 gms) complete as specified and as directed

S&F in repair PTMT Soap dish dish type (oval/Square), with Brass CP screw of size 100x50mm complete all as specified and directed.

S&F in repair for PTMT Grating doom 100 mm dia with waste hole fixed on floor/nahani trap with cement mortar, complete all as specified and directed.

S&F in repair for Tubular towel rail of brass chromium plated, 20mm dia, D type, 60cm long between flanges, complete all as specified and directed.(make-Jaquar/ Marc/ Zoloto).

S&F in repair 110 mm bore PVC (SWR) pipe single socketed in any length with rubber ring joints, laid in trenches, floor or fixed on wall including fixing clips complete all as specified and directed.

S&F in repair 75 mm bore PVC (SWR) pipe single socketed in any length with rubber ring joints, laid in trenches, floor or fixed on wall including fixing clips complete all as specified and directed.

S&F of PVC (SWR) bend any radius suitable for 75 mm bore PVC pipe jointed with solvent complete all as specified and directed.

S&F of PVC (SWR) bend any radius suitable for 110 mm bore PVC pipe jointed with solvent complete all as specified and directed.

S&F of PVC (SWR) single "T" 75 mm bore PVC pipe jointed with solvent complete all as specified and directed.

S&F of PVC (SWR) single "T" 110 mm bore PVC pipe jointed with solvent complete all as specified and directed.

S&F of PVC (SWR) double "T" 75 mm bore PVC pipe jointed with solvent complete all as specified and directed.

S&F of PVC (SWR) double "T" 110 mm bore PVC pipe jointed with solvent complete all as specified and directed.

M&L 110mm dia PVC (SWR) floor trap including jointing with solvent cement and proper bedding and jointing with existing pipe complete all as specified and as directed.

M&L 125/110mm dia PVC (SWR) gully trap including jointing with solvent cement and proper bedding and jointing with existing pipe complete all as specified and as directed.

M&L 110mm dia PVC (SWR) vent cowl including jointing with solvent cement and proper bedding and jointing with existing pipe complete all as specified and as directed.

Taking up or down steel tubing and connections 15mm bore complete all as specified and directed.

Taking up or down steel tubing and connections 20mm bore complete all as specified and directed.

S& F 15 mm bore steel water tubes, medium grade, galvanised with all fitings and fixed to wall, complete all as specified and directed.

S& F 20 mm bore steel water tubes, medium grade, galvanised with all fitings and fixed to wall, complete all as specified and directed.

S&F in repair factory made Z section steel window with side hung shutter frame including projecting/ box type hinge with steel handle and steel peg stay. complete with glazing bars , dovetailed or welded including a shop coat Red Oxide priming complete all as specified and directed.

S&F in repair factory made Z section steel ventilator with center hung shutter frame including projecting/ box type hinge with steel handle and steel peg stay complete with glazing bars , dovetailed or welded including a shop coat Red Oxide priming complete all as specified and directed.

S&F 4mm thick frosted glass, ordinary quality and glazing with oil putty in square n.exc 0.5 sqm in each pane complete all as specified and as directed.

M&L for preparation of newly steel and iron surface of any description width or girth exc 10 cm and applying two coats of synthetic enamel paint complete all as specified and directed.

S&F of Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and as directed.

S&F in repair rotational moulded,multilayer HDPE water storage tank of 1000 ltrs capacity(Cylindrical vertical with closed top) ISI marked fixed in position on existing places complete all as specified including 02 Nos 20mm dia full threaded GI tank niple, 20 mm dia PTMT float valve epoxy coated Aluminium rod with high density plastic float ball( of minium weight 210 gms) and refixing of inlet, outlet & overflow pipe etc, complete all as specified and as directed. (MAKE- Sintex/ Polycon)

Taking down existing tarfelt including plaster of any type and course from roof surface including adjoining parapets and removing the materials to a distance exc 50 mtr but n.exc 100 mtr away and deposited where directed including roughening old concrete surface by tucking and rubbing with wire brushes and cleaning the surfaces with water to remove all loose dirts etc complete all as specified and directed.

M&L for PCC 40 mm thick type B-0,1:2:4 (12.50 mm graded aggregate) as in roof padding complete all as specified and directed.

M&L for 15 mm thick plastering in CM(1:4) using WPC @ 3% by wt. of cement,in order to maintain proper slope over existing roof surfaces for laying APP based polymeric membrane roof treatment complete all as specified and directed. Note:- WPC shall be measured and paid separately.

M&L for roof treatment with polymeric water proofing membrane to non accesible roof with the following courses as under complete all as specified :- (a) Cleaning surface by wire brushing,brooming, removing dust complete and make the surface even and smooth. (b) Applying a coat of bitumen primer conforming to IS-3384 - 1965 @ 0.40 lit/Sqm and allow to dry. (c) Applying one coat of hot blown bitumen grade 85/25 as per IS-702-1988 @ 1.20 Kg/Sqm of each coat applied over primer incl cleaning of surfaces . (d) Supply and laying 3mm thick polymeric water proofing membrane weight not less than 3.6 Kg/Sqm with nonwoven polyester fabric weight not less than 160 gms/sqm over area including overlapping of 100mm(min) as per manufacturers instruction.Polymeric membrane shall be taken to a height of 60cm (min) and then inserted inside the groove of parapet wall and shall be finished by a membrane flashing. (Note :- (i) Laying APP bassed polymenic membrane shall be done torch on methed or as per manufacturer's instructions. (ii) A minimum overlap of 100mm and 75mm should be made at the end and sides of the polymeric membrane respectively and sealed all overlaps and joints as per manufacturer's instruction. (e) Applying evenly one coat of bituminous aluminium paint @ 150 gm/Sqm complete all as specified and directed. NOTE: The complete work shall be done under strict supervision of manufacturers technical representative and as directed.

Supply only integral water proofing compound conforming to IS: 2645 - 1975 specification complete all as specified and as directed (Make : CICO No- 1/SIKA/ACCO PROOF).complete all as specified.

Taking down chowkhats or frames with shutters (without taking off shutters from the frame) area exc 1.50 and n.exc 4 Sqm each and removing from site complete all as specified and directed.

Taking down chowkhats or frames with shutters (without taking off shutters from the frame) area n.exc 1.5 Sqm each and removing from site complete all as specified and directed.

S&F pressed steel frames of size 105x60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc. complete all as specified and directed. NOTE: The quoted unit rate under this item shall deemed to be include one shop coat of primer.

M&L for PCC 1:3:6 type C-2 (using 40mm graded aggregate) as in hold fast block including necessary form work etc complete all as specified and as directed.

S&F 35mm thick factory made, 2nd class hard wood, plain framed, factory made panelled shutter ( two panel) with lock rail and panel of Timber flat on both faces, ( feather edged)the size of rail and styles as per IS: 1003 ( Part I), kiln seasoned and chemically pressure treated complete all as specified and directed.

S&F factory made Solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet, reinforced with MS square tube, supplying and fixing in opening with fittings as per specification & drawing complete all as specified and directed.

S&F, factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails MS frame shall be covered with heat moulded plain cover PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for styles and plain colour PVC sheet for top rails lock rail and bottom rail on either side & as gap insert for top rail and bottom rail paneling of plain colour PVC sheet to be fitted in MS frame welded/sealed to the styles and rails with suitable PVC sheet beading and jointed together with solvent cement and supply & fixing in the frame at site as per specification and shown on drawing SSR Part-II (2004) all as specified complete all as specified and directed.

S&F 100mm size stainless steel butt hinges medium weight complete all as specified and directed.

S&F 150mm long aluminum anodized barrel tower bolt of extruded section, fixed with screws complete all as specified and directed.

S&F 150mm size Aluminiun handle, oval type,Cast type, fixed with screws complete all as specified and directed.

Taking down cement or cement lime plaster any description from walls/ceiling etc including racking out joints, hacking for key & scrubbing down with water complete all as specified and directed.

Demolition of brick masonary work, built in cement mortar including all quions, arches, pillars, etc. but excluding precast concrete articles etc. and deposited where directed complete all as specified and directed.

M&L for brick work with old size sub class 'B' bricks, straight or curved on plan to any radius in half brick thick wall built in cement mortar 1:4 complete all as specified and directed.

M&L for brick work with old size sub class 'B' bricks, straight or curved on plan exceeding 6m mean radius built in cement mortar 1:6 complete all as specified and directed.

M&L rendering 15 mm thick in cm 1:4 on unfair faces of brick work or concrete surfaces finishing surfaces even and smooth without using extra cement , complete all as specified and as directed.

M&L rendering 15 mm thick in cm 1:6 on fair faces of brick work or concrete surfaces finishing surfaces even and smooth without using extra cement , complete all as specified and as directed.

M&L rendering 5 mm thick in cm 1:3 on ceiling or concrete surfaces finishing surfaces even and fair complete all as specified and as directed.

Material and labour for preparation of new plastered or unplastered surafces of wall and applying three coats of white wash complete all as specified and directed.

Material and labour for preparation of new plastered or unplastered surafces of ceiling and applying three coats of white wash complete all as specified and directed.

M&L for preparation of newly plastered surfaces of wall and applying two coats of cement base paint over a coat of white cement base primer complete all as specified and directed.

Material and labour for preparation of old plastered or unplastered surafces of wall and applying one coat of white wash complete all as specified and directed.

Material and labour for preparation of old plastered or unplastered surafces of ceiling and applying one coat of white wash complete all as specified and directed.

M&L for preparation of old wood or wooden base materials of any description, not otherwise described over 10 cm in width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

M&L for preparation of old steel and iron surface of any description, not otherwise described width or girth exc 10 cm and applying one coats of synthetic enamel paint complete all as specified and directed.

M&L for preparation of old plastered surfaces of wall and applying one coat of cement base paint complete all as specified and directed.

Dismantling floor, hearth or wall tilling including cement mortar bedding and rubbish off the premises complete all as specified and directed.

M & L for Non skid ceramic coloured tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0.11 sqm but not exc 0.18 (Ist quality ) conforming to IS-13755, as in floor set and jointed in neat cement slurry and pointed in coloured cement to match the surface including 15 mm thick screed bed or bedding layer of cement mortar (1:6) for laying floor finishes complete all as specified and as directed. (Make- Kajaria / Johnson/ Nitco)

M & L for glazed ceramic coloured tiles 300 x 200 x 7 mm thick (Ist quality) conforming to IS-13753, as in vertical surface such as skirting/dado set in neat cement slurry and pointed in coloured cement to match the surface, including 10mm thick rendering to receive tiles in CM (1:4) complete all as specified and as directed.(Make- Kajaria / Johnson/ Nitco)

Demolition of cement concrete un reinforced in ground floor and paving n exc 15cm thick (below or above ground level) complete all as specified and directed.

M&L for plain cement concrete 1:3:6 Type C1 (using 40mm graded stone aggregate ) as in drains, surface channels, etc including necessary form work complete all as specified and directed.

Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete,using extra cement, including form, moulds,mitred/stopped ends etc complete all as specified and directed.

Add or deduct for each 25mm girth or part thereof over or under 30cm ---------------- Ditto -----------. (Only rate to be quoted)

M&L for 75mm thick plain cement concrete 1:3:6 type C2 (using 40mm graded stone aggregate) as in plinth protection and footpath finished even and smooth without using extra cement, including making joints to the full depth of PCC at every 3 metres and at every change of direction and filling the same with & including bitumen and sand 1:2 by weight complete all as specified and as directed.

M&L for 50mm thick cement concrete 1:2:4 type B-1 using 20mm graded stone aggregate as in floor, laid in bays,finished surface even and smooth with using extra cement complete all as specified and directed.

M&L in repair mild steel framed work such as grills, gratings etc. with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings, framework of water tanks and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed.

Excavation in trenches not exceeding 1.5 mtr wide and not exceeding 1.5 mtr in depth for foundation or shafts, manhole, sewage line etc and getting out in soft /loose complete all as specified and directed.

Returning filling in inluding spreeding, leveling, watering and well ramming in layers not exc 25 cm thick in soft /loose soil complete all as specified and directed.

Removing excvated material (Soil) not exceeding 50 mtr and depositing where directed at a level not exc 1.5 mtr above the starting point complete all as specified and directed.

M&L for 150mm thick concrete bed to drain pipe (200mm bore) with PCC (1:4:8) type D2 using 40mm graded stone aggregate including packing under and haunching against the sides of pipe after they are laid jointed and tested complete all as specified and as directed.

M&L for salt glazed stone ware drain pipe grade-A, conform to IS-651-1980, 200mm dia laid in trenches and jointed in cement mortar (1:1) complete all as specified and as directed.

Cutting into existing man holes for connecting new drains making good to pipes and rendering cutting out existing benching for and forming branch channel (1/2 round or ¾ in section) in cement concrete 1:2:4 type B-1 (using 20 mm graded stone aggregate) surface smooth finished and reforming benching as required for internal dia of pipe 200mm all as specified and directed

S&F salt glazed stoneware gully traps, squar or round mouthed, type 'P' of size 180x150 mm complete all as specified and as directed.

M&L for water proof treatment to sunken floor with course of treatments as under :- (a) M&L Plastering 10mm thick in CM 1:4 using 100% coarse sand on roof including WPC 3% by weight of cement. (b) M&L for first layer of cement slurry at the rate of 0.488 Kg/sqm mixed with Acrylic based polymer modified cementitious composite compound at the rate 0.253 Kg/sqm,the layer should be allowed to air cure for at least 04 hours. (c) Applying second layer of cement slurry at the rate of 0.242 Kg/sqm mixed with Acrylic based polymer modified cementitious composite compound at the rate 0.126 Kg/sqm,the layer should be allowed to air cure for at least 04 hours follwed by waer cure for 48 hours. (d) Supply and laying Polythene film of 200 micron duly fixed with suitable adhessive NOTE :- The quoted rate shall be deemed to have been included necessary preparation of surfaces,treatment and sealing of all joints,corners,junctions of pipe and masonry with polymer mixed sluury .

M & L for plain cement concrete (1:4:8) type D-2 using 40mm graded stone aggregate as in foundation filling in sunken floor complete all as specified and directed.

Demolition of RCC of any description and in any position not otherwise specifically provided for including cutting reinforced as required complete all as specified and directed.

M&L for TMT bars 10 mm dia, cut to length, bent to shape required including cranking, bending spirally for hooping for columns and binding with and including mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directed.

M&L for TMT bars 6mm to 8mm dia, cut to length, bent to shape required including cranking, bending spirally for hooping for columns and binding with and including mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directed.

M&L for providing RCC 1:2:4 type B-1( using 20mm graded stone aggregate) as in precast cover slab and the like inclluding necessary formwork complete all as specified and directed.

Form work to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work not exceeding 200 mm thick (horizontal or sloping) for fair finished flat surface of concrete complete all as specified and directed

SCHEDULE OF CREDIT Rate quoted by the Tenderer for this schedule should not be less than rate assessed by the department shown on estimated rate column for the respective items and total amount under col No 53 will be adjusted accordingly.

Old unserviceable bricks

Old 15/20 mm tubing of any description

Old steel window/Ventilator of any description

Old U/S chowkhats with shutters exc.1.5 Sqm and n.exc4sqm each with aluminium monganies.

Old U/S chowkhats with shutters n. exc.1.5 Sqm each with aluminium monganies

Old U/S pvc flushing cistern of any description

Old U/S 110/75mm pvc pipes with fitting of any description

Old U/S 1000 lts tank of any description

Old U/S CP stop valve,pillar tape, stop cock etc of any description

Old U/S shop dish stop valve,pillar tape, pvc connection etc of any description

Old U/S mirror of any description

ANUP ENGINEERING WORKS