Annual Plan-127/25-26-RENNOVATION WORKS TO KOLAKKAD PHC BULIDING-General Civil Work

phc maintenance

13.1.2:12 mm cement plaster of mix:1:6 (1 cement : 6 fine sand).

13.105:Re-lettering with black Japan paint of approved brand and manufacture.

13.88:Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete.

13.98.1:Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade:One or more coats on old work

13.99.1:Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :One or more coats on old work

OD441412/2025-2026:Providing and fixing 150mm UPVC square gutter pipe over GI clamp of same profile @ 1 mtr C/C

OD441413/2025-2026:Providing & fixing precoted galvanised iron profile sheet (size ,shape and pitch of corrugation as approoved by Engineer in charge)0.35 mm (+0.05 %).total coated thickness with zinc coating 120 grams per sqm as per IS:277 in240 mps steel grade 5-7 microns apoxy primer on both sides of the sheet and polymer top coat 15-18 microns .Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportaions and should be supplied in single length up to 12 m or as desired by E NGINEER IN CHARGE .The sheet shall be fixed using self drilling self tapping screw of size 5.5x55mm eith EPDM seal complete up to any pitch in horizontal /vertical or curved surfaces excluding the cost of [purlinthick G.I rafter and trusses and trusses and including cutting to size and shape where ever required

OD441455/2025-2026:engaging labour

OD456304/2025-2026:Supplying and fixing hollow PVC door frame

OD456305/2025-2026:Providing and fixing factory made panel PVC door shutter

10.3:Providing and fixing in position collapsible steel shutters with vertical channels 20x10x2 mm and braced with flat iron diagonals 20x5 mm size, with top and bottom rail of T-iron 40x40x6 mm, with 40 mm dia steel pulleys, complete with bolts, nuts,locking arrangement, stoppers, handles, including applying a priming coat of approved steel primer .

50.9.6.1:Providing and fixing glazed shutters for doors, windows and clerestory windows using 4 mm thick float glass panes including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws. Using Anjili wood / jack wood 30 mm thick shutters

50.9.1.1:Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately), using good quality Anjili wood /jack wood

50.14.1.1:Removing and refixing door shutters after necessary repairs for easy opening and closing etc complete as per the direction of site Engineer-in-charge.

50.18.7.6.2:Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing . This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 50 mm dia 6 Kgf/cm2 - Internal work- Exposed on wall

4.1.8:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources)

11.38:Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of Ist quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick bed of cement mortar 1:4 ( 1 cement : 4 Coarse sand), including pointing the joints with white cement and matching pigments etc., complete.

14.6.1:Renewing glass panes, with wooden fillets wherever necessary: Float glass panes of nominal thickness 4 mm (weight not less than 10kg/sqm)