Construction of New Auditorium cum District Library, Silchar in Cachar District during the year 2017-18

Amount

Earthwork in excavation for foundation trenches of walls, retaining walls, footings of column, steps, septic tank etc. including refilling (return filling) the quantity as necessary after completion of work, breaking clods in return filling, dressing, watering and ramming etc. and removal of surplus earth with all lead and lifts as directed and specified in the following classification of soils including bailing out water where necessary as directed and specified. Up to a depth of 2.00m below the existing ground level. a)In hard/ dense soil

b) In ordinary Soil

Extra over item no.1 (b)above for each 1m depth or part thereof beyond the initial depth of 2m

Supplying and filling sand gravel in foundation trenches of column footings over slushy soil including local carriage of materials within 8 km pumping out of water, ramming etc. complete for strengthening the bearing capacity of the soil as directed and specified including payment of Forest Royalty and Sales Tax and other duties and taxes as may be necessary.

Earth / Sand filling with river sand or silt (predominantly non plastic) by truck carriage including loading and unloading in plinth in layer not more than 150 mm thick including necessary, carriage, watering, ramming etc. complete as directed and specified including payment of land compensation, Forest Royalty, Sales Tax and other duties and taxes as may be necessary.

NOMINAL MIX. ( P.C.C. WORKS ) Plain cement concrete works with coarse aggregate of sizes 13mm to 32mm in foundation bed for footings, tie beams, steps, walls, brick works etc. as directed and specified including dewatering if necessary and curing complete (shuttering where necessary shall be measured and paid separately). In prop. 1 cement : 3 sand : 6 coarse aggregate by volume

Providing and laying 25mm thick damp proof course with cement concrete in prop 1: 1.5: 3 with graded stone agg. Of 10mm down nominal size including providing approved damp proof admixture in proportion as recommended by the manufacturer including curing etc. complete as directed.

Providing and laying plain/reinforced cement concrete works in prop 1:1.5:3 (1 cement :1.5 coarse sand :3 graded stone chips, 20mm down ) including dewatering if necessary, and curing complete but excluding cost of form work and reinforcement for reinforced cement concrete work (form work and reinforcement will be measured and paid separately) In substructure up to plinth level N) Without using admixture, plasticiser b) M20 grade concrete or Prop. 1:1.5:3

(B) In super structure from plinth level up to 1st floor level. ii) Columns, pillars, posts, struts, suspended floor, roof, landing, shelf and support, balcony, lintel, sill band, beam, girder, bressumer, cantilever, staircase (except spiral staircase and landing ) including preparing the top surface and finishing of nosing. N) Without using admixture, plasticiser b) M20 grade concrete or Prop. 1:1.5:3

Providing and laying plain/reinforced cement concrete works cement, coarse sand & 20mm down graded stone aggregate including dewatering if necessary, and curing complete but excluding cost of form work and reinforcement for reinforced cement concrete work (form work and reinforcement will be measured and paid separately) Using Mixer Machine In substructure up to plinth level Foundation, footing, columns with base tie and plinth beam, pile cap, base slab, retaining walls, walls of septic tank, inspection pit and the like and other works not less than 100mm thick up to plinth level. M20 grade concrete or Prop. 1:1.5:3

In super structure from plinth level up to 1st floor level. Columns, pillars, posts, struts, suspended floor, roof, landing, shelf and support, balcony, lintel, sill band, beam, girder, bressumer, cantilever, staircase (except spiral staircase and landing ) including preparing the top surface and finishing of nosing. M20 grade concrete or Prop. 1:1.5:3

PLYBOARD SHUTTERING (FORMWORK) Providing form work of 12mm thick Plywood Board so as to give a rough finish including centering, shattering, strutting and propping etc., height of propping and centering below supporting floor to ceiling not exceeding 4.0M and removal of the same for in situ reinforced concrete and plain concrete work in: Columns, Pillars, Posts & Strut of square/ rectangular/ polygonal in plan or any shape like Tee/L etc. having plane vertical face

Sides and Soffits of Beams, beam haunchings, cantilever girders, bressumers, lintels and horizontal ties. (a) For depth not exceeding 1.0M.

Flat Surfaces such as soffits of suspended floors, roofs, landings, cantelever slabs, chajjas, balconies and the like. (a) Floors etc. upto 200mm in thickness.

Vertical surface such as walls (any thickness), parapet walls, partitions and the like including attached pilasters, butresses, plinth and string courses and the like.

Staircase with sloping or stepped soffits including risers and stringers but excluding Landing.

Providing form work of 12mm thick Plywood board and removal of the same in edges of slabs and breaks in floors and walls etc. of in-situ reinforced concrete works upto first floor level. (a) Thickness not exceeding 200mm.

Providing form work of ordinary timber planking so as to give a rough finish including centering, shuttering, strutting and propping etc., height of propping and centering below supporting floor to ceiling not exceeding 4.0M and removal of the same for in-situ reinforced concrete and plain concrete work in: Foundation, footings, bases of columns, pile cap, raft and mass concrete works etc. (a) Using 38mm thick plank

Sides and Soffits of Beams, beam haunchings, cantilever girders, bressumers, lintels and horizontal ties. For depth not exceeding 1.0M. Using 38mm thick plank

Providing soling in foundation and under floor with stone/ best quality picked jhama brick, sand packed and laid to level and in panel after preparing the subgrade as directed including all labour and materials and if necessary dewatering, complete. (a).Brick on flat soling.

Filling sunken floor with broken jhama brick bats and sand including compacting and supplying of materials complete as specified and directed for all levels.

Extra cost for lifting of brickbats and sand for filling of sunk floor for each subsequent floors above the ground floor as directed and specified.

Brick work in cement morter with 1st class brick including racking out joints and curing complete as directed. In Sub-structure upto plinth level including dewatering if necessary In proportion 1:5.

In proportion 1:6

1st class brick nogged wall in cement mortar including racking out joints and curing complete as directed in super structure above plinth up to 1st floor level (protruding M.S rod/Tor steel of column to be embeded in cement mortar and will be measured and paid separately) (A) 112mm thick brick wall (a) In cement mortar in proportion 1:4. (1 cement:4 sand)

Cellular Concrete Block work using Cellular Light Weight concrete block of Size 500x200x100mm conforming to IS-2185 Pt-3 or pt-4 in cement morter of proportion 1: 5 including racking out joints and curing complete as directed instructure. (protruding rod is to be provided at every 3 course interval and will be measured and paid separately) (a) In Sub-structure upto plinth level including dewatering if necessary

100mm thick wall using Cellular Light Weight concrete block of Size 500x200x100mm conforming to IS-2185 Pt-3 or pt-4 in cement mortar of proportion 1: 5 including racking out joints and curing complete as directed in super structure above plinth up to 1st floor level (protruding rod is to be provided at every 3 course interval and will be measured and paid separately)

Extra for CC block walling on item no 4.3.5 for each subsequent floor or part thereof above the 1st floor level.

Extra for brick walling for each subsequent floor or part thereof above the 2nd floor level.

Extra for brick walling for each subsequent floor or part thereof above the 3rd floor level.

Extra for brick walling for each subsequent floor or part thereof above the 4th floor level.

25 mm thick cement concrete topping 1:2:4 (1cement : 2 coarse sand : 4 coarse aggregate of 12mm nominal size) finished with a floating coat of neat cement finish to be laid in panels including curing etc. complete as directed.

Providing polished ceramic wall tiles of approved quality, size, shape and thickness not less than 8mm on walls and skirtings over cement mortar bed 10 mm thick in prop. 1:3 (1 cement : 3 coarse sand ) including cutting where necessary finished with flush pointing with Fix-A-Tile (Choksey / Sika / Pedelite / Rouf) /white cement slurry mixed with approved pigment to match shade of tiles complete at all levels as specified and directed. (Cement plastering to be measured and paid separately). (Coloured pigment should be in conformity with colour of tiles and as approved and directed by the Department). (Walls means both interior and exterior walls). "Normal range Somany/ Orient/Nitco/Asian Make" Of size 200mmx300mm and above Of size 300mmx450mm and above

Providing VITRIFIED floor tiles of approved quality of specified size, shape and thickness not less than 18mm on floors, skirtings, risers and treads of steps over 15 mm thick base of cement mortar in prop. 1:3 (1 cement : 3 coarse sand ) including cutting where necessary finished with flush pointing with Fix-A-Tile (Choksey/Sika/Pedelite/Rouf) / white cement slurry mixed with approved pigment to match shade of tiles, mixed with approved pigment to match the shade of the tiles, complete at all levels as specified and directed. (Coloured pigment should be in conformity with colour of tiles and as approved and directed by the Department) "Delux range Somany/ Orient/Nitco /Varmora/VITA/ Marbito/ Make" Of size 1200mmx1600mm and above

Kota stone slab of 18 mm thick in riser of steps, skirting, dado and pillars laid with 10mm thick cement plaster 1:3 (1 cement : 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs including rubbing and polishing complete. 600mm x 900mm and above

Providing polished granite tiles of approved quality, size, shape and thickness not less than 18 mm on floors, skirtings, risers and treads of steps over 15 mm thick base of cement mortar in prop. 1:3 (1 cement : 3 coarse sand ) including cutting where necessary finished with flush pointing with Fix-A-Tile (Choksey/Sika/Pedelite/Rouf) / white cement slurry mixed with approved pigment to match shade of tiles, mixed with approved pigment to match the shade of the tiles, complete at all levels as specified and directed. (Cement plastering to be measured and paid separately). (Coloured pigment should be in conformity with colour of tiles and as approved and directed by the Department) With White cement Providing Antiskid Tiles of approved quality size, shape not less than 8mm on floor, skirting over a cement mortar bed 15mm thick of 1:3 (1 cement: 3 coarse sand) approved make fix with Fix-A-Tile Choksey/Sika/Pedelite/Rouf)/ white cement complete at all level as specified and directed.

CERAMIC Normal range (Sizes 300 mm x 300mm and above) Orient made: Galaxy Brown, Galaxy creama, Galaxy Pink, Galaxy Green, Pulsar Beige, Pulsar Blue, Pulsar Dove, Pulsar Pink, Burj Brown, Burj Green, Burj Slate

Providing,fitting and fixing Loop pile carpet from Uniproducts (India) Ltd.of thickness not less than 4mm with maximum 7mm pile height with pile fibre of 100% BCF polypropelene of width 3.66m laid on existing concrete floor with approved transparent polythene and foam sheet to make the floor surface even and sound free complete as directed and specified viii) New Royal Guard Brand

Providing,fitting and fixing wooden flooring from Uniproducts (India) Ltd.of thickness 14mm made of pure wood(Engineered Wood) of different types with a top layer of 3mm thick hard wood and Under layer of 2mm thickness made of polythene and foamsheet laid on existing concrete floor complete as directed and specified Engineered Wood (New) from Uniproducts(India) Ltd. i) Walnut Brand

15 mm thick Cement plaster in single coat on single or half brick wall for interior plastering up to 1st floor level including arises, internal rounded angles, not exceeding 80mm girth and finished even and smooth including curing complete as directed. A) On rough side b) In cement mortar 1:4

B) On fair side b) In cement mortar 1:4

20 mm thick Cement plaster in two coats on single or half brick walls for interior plastering up to 1st floor level including arises, internal rounded angles,chamfers and / or rounded angles not exceeding 80mm in girth and finished even and smooth including curing complete as directed. On fair side (backing coat 10 mm and finishing coat 10mm thick) In cement mortar 1:3

Extra over item no 6.2.1 to 6.2.3 for plastering on celling and soffits of stairs up to 1st floor level (instead of plastering on walls) including curing complete as directed.

Extra over item no 6.2.1 to 6.2.3 for plastering on celling and soffits of stairs up to 2nd floor level (instead of plastering on walls) including curing complete as directed.

Extra over item no 6.2.1 to 6.2.3 for plastering on celling and soffits of stairs up to 3rd floor level (instead of plastering on walls) including curing complete as directed.

Extra over item no 6.2.1to 6.2.3 for interior plastering above 1st floor level for every addl floor or part thereof including curing complete as directed.

Extra over item no 6.2.1to 6.2.3 for interior plastering above 2nd floor level for every addl floor or part thereof including curing complete as directed.

Extra over item no 6.2.1to 6.2.3 for interior plastering above 3rd floor level for every addl floor or part thereof including curing complete as directed.

Extra over item no 6.2.1to 6.2.3 for interior plastering above 4th floor level for every addl floor or part thereof including curing complete as directed.

Extra over item no 6.2.1 to 6.2.3 for exterior plastering over wall for every addl floor or part thereof beyond 1st floor level including curing complete as directed.

Extra over item no 6.2.1 to 6.2.3 for exterior plastering over wall for every addl floor or part thereof beyond 2nd floor level including curing complete as directed.

Extra over item no 6.2.1 to 6.2.3 for exterior plastering over wall for every addl floor or part thereof beyond 3rd floor level including curing complete as directed.

Extra over item no 6.2.1 to 6.2.3 for exterior plastering over wall for every addl floor or part thereof beyond 4th floor level including curing complete as directed.

15 mm thick plain cement mortar bands in cement mortar 1:4 in width including curing complete as directed. A) Up to 300 mm width c) Raised band

Cement plaster skirting with cement mortar in prop. 1:3 (1 cement : 3 coarse sand) finished with a floating coat of neat cement including rounding of junctions with floor.(plinth) 15 mm thick

"Supplying, fitting, fixing and painting where necessary (one coat primer and two coats of paint) M/F Suspended Ceiling which includes G.I. perimeter channels of size 0.55mm thick (having one flange of 20mm and another flange of 30mm and a web of 27mm) along with perimeter of ceiling, screw fixed to brick wall/ partition with the help of nylon sleeves and screws, at 610mm c/c. Then suspending G.I. intermediate channels of size 45mm (0.9mm thick with two equal flanges of 15mm each) from the soffit at 1220mm c/c with ceiling angle of width 25mmx10mmx0.55mm thick fixed to soffit with G.I.cleat and steel expansion fasteners. " "Ceiling section of 0.55mm thickness having knurled web of 51.5mm and two equal flanges of 26mm each with lips of 10.5mm are then fixed to the intermediate channel with the help of connecting clip and in direction perpendicular to the intermediate channel at 457mm c/c, 9.5mm/ 12.5mm tapered edge Gypboard (conforming to IS:2095-1982) is then screw fixed to ceiling section with 25mm long drywall screws at 230mm c/c. Screw fixing is done mechanically either with screw driver or drilling machine with suitable attachment. Finally, the boards are to be jointed and finished so as to have a flush look which includes filling and finishing the tapered and square edges of the boards with jointing compound, joint paper tape and two coats of drywall topcoat suitable for Gypboard complete at all levels as specified and directed. (For light fittings, providing opening for doors, window, ventilators etc, cut out made with frame of perimeter channel supported suitably to be measured and paid separately where necessary). " 9.5mm thick

Providing colour coated DURASHINE/TATA BLUESCOPE zinc-aluminium profile sheet (total coated thickness=0.45mm) of nominal 1015mm effective cover width and nominal 28mm deep ribs with subtle square fluting in the five pan at nominal 203mm centre-to-centre including fasteners class 2 SDS, fitting and fixing complete. (Roof trusses, purlins etc. to be measured and paid separately.) DURASHINE TILE PROFILE (0.50mm(TCT) x 505mm)

Providing colour coated DURASHINE/TATA BLUESCOPE zinc-aluminium roof , wall and tile profile sheet accessories (total coating thickness=0.45mm) including fasteners class 2 SDS, fitting and fixing complete. (Roof trusses, purlins etc. to be measured and paid separately.) Plain Ridge

Providing wood work in frame (chowkaths) of doors, windows, clerestory windows and other similar works wrought, framed and fixed in position in contact with C.C or brick masonry wall including supplying, fitting and fixing with M.S. hold fast (40mmx3mmx250mm) as per design embeded in cement concrete block in proportion 1:2:4 and with two coats of kiricide oiling to the timber faces in contact with C.C and masonry as directed and specified. (b) With 1st class timber (Bonsum/ Sundi)

Providing and fixing flush door shutters solid core construction with frame of 1st class hard wood with cross band and face veneered ply wood face panels conforming to relevent I.S code including oxidised iron butt hinges (100mm x 75mm x 3.5mm) 6 nos with necessary wood screws. Non decorative type and block board core. 35 mm thick

Providing, fitting and fixing full panelled doors/ windows including oxidised M.S butt hinges (100mm x75 mm x3.55mm) with necessary screws (other fittings to be measured and paid separately ) B) With 1st class local wood (Gamari/Hollock/Bonsum ) (i) 40 mm thick.

Providing, fitting and fixing powder coated pressed steel door frame made of 1.25mm/ 1.6mm thick sheet of various sizes with necessary hinge jamb, lock jamb, head and steel base ties at the bottom of the frame. The whole frame shall be welded or rigidly fixed together by mechanical means with base ties of pressed mild steel angle of size 20x20x1.25mm thick. Frame to be filled up with 1:4:8 P.C.C. after fitting the frame with brick/ concrete works etc.complete as directed by the department for all levels. (P.C.C. to be measured and paid for seperately). (b) 1.60mm thick sheet (iv) Size 125mm x 60mm (Double rebate)

GRILLS Providing, fitting and fixing M.S. grill of required pattern for windows/ clerestory windows/ openingwith M.S. flats at required spacing in frame all round, squre or round M.S. bars with round headed bolts and nuts or screws. Plain grill Fixed to Brickwork/P.C.C/R.C.C.

Ornamental grill Fixed to Brickwork/P.C.C/R.C.C.

a) Applying one coat of cement primer of approved brand and manufacture on new wall surface after throughly brooming the surfaces free from mortar droppings and other foreign matter and including preparing the surface even and sand papered smooth.

Providing two coats of acrylic water based wall putty/ wall filler of Asian Paints/ Berger/ Dulux over concrete/ cement plaster/ brick walls and ceilings both internal and external after removing all the loosely adhering material from the wall/ ceiling surface with the help of emery stone, putty blade or wire brush, moistening the wall with the help of sufficient quantity of clear water as specified and directed by the department.

Providing two coats of Birla White Wall Care Putty (Water Resistant White Cement based putty for concrete/ mortar walls and ceiling both internal and external) after removing all loosely adhering material from the wall surface with the help of emery stone, putty blade or wire brush and moistening the wall with sufficient quantity of clean water as specified and directed by the department. (Total thickness of two coats is maximum 1.5mm) Thickness = 1.5 mm thick

Wall painting (two coats) with Plastic emulsion paint of approved brand and manufacture (Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac) on new surface to give an even shade after throughly brushing the surfaces free from mortar droppings and other foreign matter and sand papered smooth. Plastic Emulsion Paint of approved brand and manufacture (Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac)

Finishing old/ new wall with waterproofing weather coat smooth anti-fungal exterior painting of Apex brand of Asian paints of required shade after cleaning and clearing the surface etc. including scaffolding complete as directed at all levels (two coats)

Finishing wall with water proofing weather coat smooth anti-fungal exterior painting of Ace brand of Asian Paints and of required shade on old/new wall surface after cleaning and clearing the surface etc. including scaffolding complete as directed at all levels (two coats)

Finishing old/new wall with water proofing weather coat smooth anti-fungal exterior painting of approved make of Dulux (ICI) paint of required shade after cleaning and clearing the surface etc. including scaffolding complete as directed at all levels (two coats)

Applying priming coat with ready mixed paint, wood primer (pink) over new wood based surfaces over 100mm in girth/ width after and including preparing the surface by thoroughly cleaning oil, grease, dirt and other foreign matter, sand papering and knotting. With ready mixed paint , Wood primer (pink)

Painting two coats surfaces over 100mm in width or grith (excluding priming coat) on new wood and wood based surfaces with enamel paint of approved brand and manufacture (Asian paint/Berger paint/ICI paint/J& N paint/Nerolac paint) to give an even shade including cleaning the surfaces of dirt, dust and other foreign matter sand papering and stopping. Surfaces over 100mm in width or girth. High gloss (Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac).

Applying primary coat with ready mixed "red -lead /red-oxide" primer over new steel and other metal surface up to 100mm in width or girth after preparing the surface by thoroughly cleaning oil, grease, dirt and other foreign matter and scoured with wire brushes, fine steels, wood scrapers and sand paper. With ready mixed "red-lead/ red oxide" primer.

Painting two coats Surfaces over 100mm in width or grith (excluding priming coat) on new steel and other metal surface with enamel paint of approved brand and manufacture (Asian paint/Berger paint/ICI paint/J& N paint/Nerolac paint) to give an even shade including cleaning the surfaces of dirt, dust and other foreign matter. Surfaces over 100mm in width or girth. b). High gloss (Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac).

Painting two coats Surfaces over 100mm in width or grith (excluding priming coat) on new steel and other metal surface with enamel paint of approved brand and manufacture (Asian paint/Berger paint/ICI paint/J& N paint/Nerolac paint) to give an even shade including cleaning the surfaces of dirt, dust and other foreign matter. Surfaces over 100mm in width or girth. High gloss (Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac).

Supplying, fitting, fixing anodised aluminium fittings of approved make, resonably smooth, free from sharp edges and corners, flaws and other defects and with counter sunk holes for screws including necessary aluminium screws etc. complete.( anodised to bright natural matt & satin finished ) Sliding door bolts 250mm x16mm sliding door bolt.

Tower bolt 200mm x 10mm tower bolt.

150 mm door handle.

Door stopper with rubber stopper

Supplying, fitting and fixing in position reinforcement bars conforming to relevant I.S. Code for R.C.C. work/ R.B. walling including straightening, cleaning, cutting and bending to proper shapes and length as per details, supplying and binding with 20G annealed black wire and placing in position with proper blocks, supports, chairs, spacers etc. complete. (No extra measurement for lap, hook, chair, anchor etc. will be entertained in the measurement as they are included in the rate) (Upto 1st floor level) From Primary Producer: TATA/SAIL/Esser Steel/ Jindal steel/Shyam steel/RINL Super Ductile (SD) TMT reinforcement bars (i) In Sub-structure with superstructure

Other ISI approved TMT reinforcement bar (SAI/BISCON/THERMAX)

Providing, fitting, hoisting and fixing of roof trusses fabricated out of combination of any two or all of the following sections (i) Square section (ii) Rectangular Hollow section of specification RSH/SHS and (iii) M.S. circular hlollow section of Grade 210 including purlins, bottom runners and providing M.S. cleat, M.S. angle base plank, bolts and nuts with red oxide primer including fitting bottom runner and cleat etc. for fixing ceiling joist as per design complete as directed as per specifications. a) Using TATA make RHS/SHS of Grade 310 conforming to relevant I.S. code 4923 : 1997

Providing and fixing stainless steel (Grade 304) railing made of hollow tubes, chanels, plates etc., including welding grinding, buffing, polishing and curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i.e. fixing the railing with necessary accessories and stainless steel dash fastners, stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-Charge. (For payement only weight of stainless steel member is to be considered. No extra payment for fixing accessories such as nuts, bolts, fastners etc. will be considered.

Providing plinth protection with bricks flat laid in cement mortar 1: 4 and finished with 15mm thick cement plaster in prop. 1:2 with a floating coat of neat cement finish.

Providing 300mm wide and average 250mm deep with bed slope 1 in 150 with initial depth of 100mm drain with brick work in cement mortar in prop 1:5 with half brick thick side walls and 100mm thick C.C. (1:3:6) base over one brick flat soling including 15mm thick cement plaster in prop 1:3 finished with a floating coat of cement slurry as directed with necessary earth work in excavation of foundation trenches and refilling the sides after completion of work as specified.

Providing precast R.C.C slab over drain ,septic tank etc. in prop. 1:2:4 reinforced with 10mm M.S. bar @ 150mm centre both ways tying with 20 gauge black annealed wire with necessary shuttering , curing etc. complete including fixing in position as directed. b) 75mm thick slab

Providing precast R.C.C slab over drain ,septic tank etc. in prop. 1:2:4 reinforced with 10mm M.S. bar @ 150mm centre both ways tying with 20 gauge black annealed wire with necessary shuttering , curing etc. complete including fixing in position as directed. 100mm thick slab

Pre construction anti - termite treatment at the bottom of foundation pits and walls on either side up to a height of 300mm from bottom of the excavation made for column plinth beam, wall, trenches etc. by applying the emulsion @ 5 (five) litres per square meter of the surface area before starting construction work (supplying of necessary tools and accessories by the contractor) as per the direction of the Department complete. a) with aqueous emulsion having concentration 1:19 with chloropirophose solution (tricel or euivalent) and water, i.e. 1% solution.

Pre construction anti - termite treatment in the back fill in immediate contact with the foundation structure after completion, column, wall etc. to a depth of 450mm and width 300mm (when required refill in 200mm thick layers) applying the emulsion @ 5 (five) litres per square meter towards the concrete and masonry walls so as to ensure earth in contact with the structure well treated - with chemical (supplying of necessary tools and accessories by the contractor) as per the direction of the Department complete. a) with aqueous emulsion having concentration 1:19 with chloropirophose solution (tricel or euivalent) and water, i.e. 1% solution.

Pre construction anti - termite treatment by applying in the entire levelled area after plinth filling and before laying floor by applying the emulsion @ 5 (five) litres per square meter of the surface to be spread with light rodding so as to ensure proper absorption by the filled up earth (supplying of necessary tools and accessories by the contractor) as per the direction of the Department complete. a) with aqueous emulsion having concentration 1:19 with chloropirophose solution (tricel or euivalent) and water, i.e. 1% solution.

Pre construction anti - termite treatment by applying the soil along the external perimeter of the building (after construction completed) to a distance close to the plinth wall as specified and as directed by the deptt. up to a depth of 300mm making rod holes along the line @ 150mm apart to a depth of 300mm and applying emulsion @ 4.5 litres per running meter ensure moistening of the soil with emulsion (supplying of necessary tools and accessories by the contractor) as per the direction of the Department complete. a) with aqueous emulsion having concentration 1:19 with chloropirophose solution (tricel or euivalent) and water, i.e. 1% solution.

Providing, fitting and fixing anodised aluminium windows and ventilators of standard sections of approved brand without horizontal glazing bars joints mitred and welded (manufactured to relevant IS specifications) fitted with 6mm x 3.15mm lugs 100mm long embedded in CC blocks 150mm x 100mm x 100mm in 1:3:6 mix including providing and fixing handles, frictions stays, joining cleat, bolting device, locking arrangement, spring catch as required complete as specified and directed for all levels. (Cement concrete to be measured and paid separately). Fixed windows and ventilators (i) 6 mm clear glass

Providing, fitting and fixing anodised aluminium sliding windows and ventilators of standard sections of approved brand without horizontal glazing bars, joints mitred and welded (manufactured to relevant IS specifications) and providing and fixing handles, angle cleat, rubber gasket, roller, bolting device, locking arrangements, screws etc as required complete as specified and directed for all levels. 2 track sliding windows (i) 6 mm clear glass

(ii) 5 mm frosted glass

a) Providing, fitting and fixing anodised aluminium fixed windows and ventilators of standard sections of approved brand, joints mitred welded (manufactured to relevant I.S. specification) fitted with glass panes of required thickness and 12mm prelaminated boards and providing and fixing handles, angle cleat, rubber gusket,roller bolting device, screws as required complete as specified and directed for all levels. (i) With 6mm thick glass panes

Providing, fitting and fixing anodised aluminium framed double leaf glazed doors with anodised aluminium frame made of 100mm x 45mm x 2mm section of approved brands with door styles of size 81mm x 45mm x 2mm, top rails 50mm x 45mm x 2mm, lock rails 81 mm x 45mm x 2mm,bottom rails 100mm x 45mm x 2mm fitted with glazing clip, special type rubber gasket complete including hydraulic floor spring, pivot, tower bolt in each leaf, aluminium door handle, lock, angles, cleat etc complete as specified and directed by the Department at all levels. (i) 6mm clear glass

Providing and fixing anodised aluminium framed double leaf doors of approved brand with styles size 45mm x 48mm x 3.2mm, top rails 50mm x 45mm x 2.5mm, lock rails 48 mm x 45mm x 2.5mm, bottom rails 100mm x 45mm x 2.5mm fitted with tapper clips of size 20mm x15mm x1.2mm complete with automatic floor mounted door closure, butterfly type handles, special cylindrical lock, concealed type aluminium tower bolt,neoprene dryset rubber gusket, door felt gusket, etc.complete as directed by the Department at all levels. (a) Double leaf doors (i)5mm thick glass and 12mm thick prelaminated particle board

Providing, fitting and fixing aluminium curtain wall on the exterior face of building fitting to concrete member by drilling hole fixing by brass screw fabricated with coloured anodised aluminium section of approved brand of size 101mm x 44.50mm by providing aluminium jointing angles including providing 6mm thick coloured reflectory type glass fitted with aluminium at all levels. (iv)6mm coloured glass

(A) Supplying, mixing, laying and applying the following waterproofing systems over Raft slabs, Roof slabs, Terraces etc. including curing complete as specified and directed by the Department at all levels.: (i) 1mm thick single coat of Master Crete M-81 of Choksey Chemicals /Dr. Sealkit Sealcrete (Asian Chemicals)/ mixed with cement in the ratio 1:2 as a prime coat. (ii) 3mm thick Polymer modified mortar - Cement sand mortar (in prop 1:3) mixed with Master Crete M-81/Dr. Sealkit Sealcrete (Asian Chemicals) @ 15% by weight of cement. (iii) 1mm thick coat of Master Crete M-81 /Dr. Sealkit Sealcrete (Asian Chemicals) mixed with cement in the ratio 1:2 as final coat. Using Master Crete M-81 of Choksey Chemicals / Dr. Sealkit Sealcrete (Asian Chemicals)

Providing and applying over sunken slab etc., two coats of waterproofing slurry prepared with neat cement, water and modified Styrene Butadiene Rubber based polymer like Sika Latex of Sika India Ltd./Dr. Sealkit Masterbond Latex (Asian Chemicals)/ RHEOMIX 141 by brush after proper surface preparation (surface preparation including thorough cleaning of surface to be measured and paid separately) as specified & directed by the Department complete.

Supply, Installation, Fixing of DRY CHEMICAL POWDER Fire Extinguisher confirming to IS: 2171 with ISI mark and CO2 cartridge will be confirming to IS: 4947 with ISI mark, Powder will be confirming to IS: 4308 with ISI Mark (10 kg) BRAND : FIRESTOP / FIREND / FIRE SHIELD

Providing cast in-situ machine driven reinforced cement concrete piles of required bore-diameter, bulb diameter, lengths and with reinforcement as per specifications and drawings including using of Bentonite solution. (Reinforcement to be measured and paid seperately as per item no. 21.4.1) C) UNIFORM PILE (II) Concrete Grade M25 iii) Pile dia 400 mm

Supplying, fitting and fixing in position reinforcement bars conforming to relevent IS code, for reinforced cement concrete works in piles including straightening, cleaning, cutting and bending to proper shapes and length as per specifications and drawings. The rings should be welded with vertical reinforcements as per specified IS codes of practice. (Inclusive of lap length, hook, chair, bend, anchor...etc) (A) TMT bar made of Primary producer (From Primary producer)

Demolition Works Demolishing plain cement concrete including disposal of debris as directed for all levels (ii) Prop (1 : 3 : 6) or leaner mix

Demolishing RCC work including stacking of steel bars and disposal of unserviceable material as directed for all levels

Demolishing brickwork including stacking of serviceable materials and disposal of unserviceable materials as directed for all levels

Dismantling steel work in built up sections in joists, angles, channels, tees, flats etc. including all gusset plates, bolts, nuts, cutting rivets, welding etc. including dismembering and stacking the materials as directed by the Department for all levels

Dismantling all types of corrugated/ trapezoidal sheet roofing including ridges, hips, valleys and gutters etc. and stacking the materials as directed by the department for all levels

Demolishing CC floors of various thickness including top layer and base course and disposal of debris as directed for all levels.

Dismantling and removing the existing door and window frame (chowkath) both wooden and steel of different sizes without damaging the walls and removing the frame and necessary repairs to the edges of the walls as directed for all levels. (i) Area of door/window upto 3.00 m2

Dismantling all types of ceiling, partition and wall lining and stacking the materials as directed by the department for all levels

Providing fitting and fixing vitreous china pedestal type water closet (European type W.C pan 400mm high ) with seat and lead ,CP brass hinges and rubber buffers , CI/MS brackets , 40 mm dia flush band with fittings including painting of fittings and brackets, required. (Flushing Cistern to be paid separately) Hindware make White Water closet POPULAR "S (Cat.No.20044) (inclusive of seat cover)

Supplying, fiting and fixing PVC flushing cistern with all internal fittings with CI brackets including fitting and fixing standard size CP flush pipe, union clamps etc. compete as directed and specified (pipes will be measured separately) ii) Hindware make a) White (i) Sleek+ PVC cistern

Providing fitting and fixing vitreous china flat back type lipped front urinal basin with standard flush pipe and CP brass spreader andbrass unions, etc. complete including painting of fittings and brackets, cutting and making good the walls & floors wherever required. C) Jaquar make a) White (iii) Large (Cat.No.URS-WHT-0703)

Supplying fiting and fixing vitreous china division plate including fitting and fixing compete as directed and specified. ii) Hindware make a) White (i) Division Plate 680 x 300 (Cat. No.61001)

Providing vitreous China wash basin with CI/MS brackets, C.P brass chain with plug,PVC waste pipe including painting of fittings and brackets, cutting and making good the walls wherever required. (Pillar cock, stop cocks, waste coupling are to be paid separately) Under Counter Basin (B) Hindware Make (a) White (i) Lara (Cat. No.10095)

Providing fitting & fixing stainless steel kitchen sink of Parryware make with CI/MS brackets, C.P. brass chain with rubber plug, PVC waste pipe etc. complete including painting the fittings ,cutting &making good the walls wherever required. (Sink cock, stop cocks, waste coupling are to be paid separately (B) Nirali (x) Grace Plain Large (Bowl Size - 560 x 410 x 215) Glossy

Providing fitting and fixing Mirror with plastic frame of size 500x400mm complete as directed and specified.

Providing, fitting and fixing CP soap tray / soap dish complete as directed and specified. (i) Jaquar Make (a) Continental (Cat.No.ACN-1331N)

Providing, fitting and fixing Liquid soap dispenser and liquid soap container complete as directed and specified. (ii) Agmeco Make (a) Liquid soap container Capsule Type (Cat.No.LSC-0001)

Providing, fitting and fixing CP towel rail complete as directed and specified. (b) Sona make (iii) Towel rail diplomat 600mm long (Cat.No.TR-0605)

(v) Towel rail diplomat 900mm long (Cat.No.TR-0605)

Providing, fitting and fixing Chrome Plated towel ring complete as directed and specified. (b) Sona make (i) Towel ring round (Cat.No.TR-06051)

Providing, fitting and fixing Chrome Plated robe hook complete as directed and specified. (b) Agmeco make (vi) Dolfee (Cat.No.DE-00211)

Providing, fitting and fixing Chrome Plated TOILET PAPER holder complete as directed and specified. (a) Jaquar make (iv) Queen's toilet paper holder with flap (Cat.No.AQN-7753)

Providing, fitting and fixing Chrome Plated waste coupling complete as directed and specified. (b) Sona (i) Rupa 32mm (HT/ FT) (Cat.No.WS-0801)

(ii) Rupa 40mm (HT/ FT) (Cat.No.WS-0801)

Providing, fitting and fixing Chrome Plated bottle trap pipe complete as directed and specified. (a) Sona make (i) Pipe for bottle trap 300mm long (Cat. No.BT-0761)

Supplying, fitting and fixing PVC pipes of 6 Kg/cm2 (Supreme/Prince) or other ISI approved including joining ,fitting and fixing wiyh clamps etc.as necessary complete at all levels including below G.L as directed and specified. In exposed surfaces or in trenches. 110mm dia.

Supplying fiting and fixing 87.5 degree PVC bend with door of (Supreme/Prince) or other ISI approved including joining , fitting and fixing etc. as necessary complete at all levels including below G.L. as directed and specified. In exposed surfaces or in trenches. 110mm dia.

Supplying fiting and fixing PVC single tee with door of (Supreme/Prince) or other ISI approved including joining , fitting and fixing etc. as necessary complete at all levels including below G.L. as directed and specified. a) In exposed surfaces or in trenches. (ii) 110mm dia.

Providing fitting and fixing PVC cowel of ISI make complete as directed and specified. 110mm dia. PVC cowel of ISI make

C.P. Grating 110 mm dia

Providing fitting and fixing 450mm dia. 90mm thick C.I. Man hole cover and frame of 25 Kg. weight complete as directed and specified.

Construction of filter bed in soak pit including earth work in excavation of soil and then filling up of the trench with brick bats/Charcoal covered with earth over a layer of A.C. plain sheet above brick bat filling complete as directed. (sizes of soak pit may vary depending on the sizes and capacities of the septic tank as well as the number of users as mentioned in the table.

Construction of inspection pit inside measurement 450mm x450mm x450mm flush with 100mm diameter HCI/PVC pipes and cement concrete base in proportion 1:3:6 over flat brick soling, 12cm brick wall in cement mortar in proportion 1:4 finished with 13mm cement plaster in proportion 1:2 in side wall and floor. 450mm x450mm air tight C.I. inspection pit cover and frame complete including supplying of materials, necessary excavation of pit as directed.

Construction of brick masonry septic tank on a bed of 1:3:6 PCC with neat cement inside plaster, necessary RCC works etc complete as directed and specified including excavation, backfilling and diaposal of surplus earth. 200 Users

Providing and fixing Chlorinated Polyvinyle Chloride (CPVC) Pipes, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings i/c fixing the pipe with clamps at 1.00m spacing. This includes jointing of pipe In exposed surfaces or in trenches. 25 mm nominal outer dia pipe

40 mm nominal outer dia pipe

Concealed pipe with cutting chases & making good the walls 15 mm nominal outer dia pipe

20 mm nominal outer dia pipe

Supplying fitting and fixing C.P. bib cock 15mm dia of approved brand directed and specified. (G.I. & C.P pipes will be measured separately) Agmeco make Bib Cock Long Body with Flange CAT No.CC 00203/CAT No.CN 00203

Bib Cock Two way with Flange CAT No.CC 00203/CAT No.CN 00203

Supplying fitting and fixing chrome plated (C.P.) stop-cock of approved brand and size as mentioned below as directed and specified.(G.I. & C.P pipes will be measured and paid separately) Agmeco 15mm dia(Male/ Female )

15mm dia(Concealed stop cock reduced body )

Supplying and fitting fixing C.P. pillar cock of 15mm dia of approved brand as specified and directed. Agmeco make Round

Supplying fitting and fixing Chrome Plated (C.P.) sink cock of approved brand as directed and specified. (G.I. & C.P pipes will be measured and paid separately) Agmeco brand a) Sink cock casted swivel spout

Supplying fitting and fixing Chrome Plated (C.P.) shower 15mm dia. Of approved brand as directed and specified. (Pipes will be measured and paid separately) Essco make (a) Casted shower arm heavy 190mm long with wall flange

Supplying and fitting gun metal country pit valve (full way valve) I.S.I. Make as specified and directed. 40 mm dia.

25 mm dia

Supplying and placing plastic cylindrical vertical claused top (PCVC) tank of Sintex / Polycon / Patton make over the stagging with manhole cover with locking and cleaning arrangement including providing pads of size as required for inlet and outlet pipes 2000 Lt capacity Sintex make

Earthwork in excavation for foundation trenches of walls, retaining walls, footings of column, steps, septic tank etc. including refilling (return filling) the quantity as necessary after completion of work, breaking clods in return filling, dressing, watering and ramming etc. and removal of surplus earth with all lead and lifts as directed and specified in the following classification of soils including bailing out water where necessary as directed and specified. In ordinary soil

Providing,Fixing,Testing & Commissioning of Mild Steel Black Pipe(IS:1239part-I) Heavy class including cutting, screwing, welding etc.complete with all fittings (butt welded) viz flanges, bends, tees, elbows, reducers etc including excavation (upto 1.5 m Deep), back filling and removal of surplus soil & providing anti corrosive treatment(coating and wrapping) as per IS:10221 with 4 mm thick tape complete as reqd. (MAKE:TATA/JINDAL/NEZONE) 80 mm dia

100 mm dia

150mm dia

Providing,Fixing,Testing & Commissioning of Mild Steel Black Pipe(IS:1239part-I) Heavy class including cutting, screwing, welding etc. and providing all fittings viz forged steel screwed fitting upto 50mm dia and bolt welded above 50mm dia flanges, bends, tees, reducers, elbow, clamps, hangers etc including cutting holes and chases in brick or RCC walls/ slabs and making good the same to the approval of Engineer-in-charge/ consultant complete including painting with one coat of primer and two or more coats of synthetic enamel paint of approved make and shade including steel work complete as required. (Make:TATA/JINDAL/NEZONE) 80 mm dia

100 mm dia

150mm dia

Supplying & Fixing,cast iron body Butterfly Valves with matching flanges, rubber insertion, nuts, bolts and washer etc (IS:13095) of following size complete as reqd. (MAKE:KOLEY/KALPANA/AUDCO) 80 mm dia

100 mm dia

150 mm dia

Providing ,Fixing ,Testing & Commissioning of air Release Valve a)25mm dia

Providing & fixing of weather proof hose cabinets fabricated from 16 S.W.G. M.S. Sheet with centre opening full front glass door and locking arrangement, suitable to accommodate one landing valve (Yard Hydrant ), 2nos.15M long hoses and 1 no. Branch pipe with nozzle . The cabinet shall be painted with one coat of primer and 2 or more coats of synthetic enamel paint of approved make & shade and shall be suitably mounted on a raised masonry platform complete as reqd.(Make:self Fabricated) (size 900x600x450)

Providing & Fixing of Gun Metal fire Brigade Connection (inlet collection head) consisting of 63mm instantaneous type male coupling with built in check valves and 150 mm dia flanged outlet complete with bolts, nuts and rubber insertions as per IS:904-1983 complete as reqd. (04 way) MAKE: ESSEL/WINCO/NEWAGE

Providing & Fixing of Gun Metal fire Brigade Connection (inlet collection head) consisting of 63mm instantaneous type male coupling with built in check valves and 150 mm dia flanged outlet complete with bolts, nuts and rubber insertions as per IS:904-1983 complete as reqd. (02 way) MAKE: ESSEL/WINCO/NEWAGE

Providing,Fixing, testing &Commissioning of Single Headed Gun Metal ISI Marked oblique pattern Hydrant Landing Valve with 80 mm dia, flanged inlet & 63 mm dia instantaneous type female outlet complete with cap and chain, twist release lug and all accessories as per IS:5290-19833 (Type-'A') and specifications complete as reequired . (MAKE:ESSEL/WINCO/NEWAGE)

Providing RRL Hose with ISI Marked (IS:636) 63 mm dia X15 M long complete with instantaneous type Gun Metal 3 mm dia ISI Marked male & female couplings (IS:903) bound & riveted to hose pipes with copper rivets and copper wire complete as reqd. ( MAKE: NIRMAL RUBBER/NEWAGE)

Supplying, Installation, Testing & Commissioning of First Aid Hose reel drawn with 30 Mtrs. Long rubber hose and G.M shut off nozzle, 25mm dia Gate valve, Union pipe complete set confirming to IS: 884.

Providing & fixing of Weather Proof M.S. cabinet (to enclose above draw out connection) fabricated from 16SWG M.S. sheet centre opening with 3mm thick full front glass door and locking arrangement duly painted with one coat of primer and two or more coats of synthetic enamel paint of appreoved make and shade and sutable mounted . Exact size and shape shall be subject to site conditions and prior approval) (Make: Self Fabricated)

Supply, Installation, Fixing of ABC Stored Pressure Fire Extinguisher with built – In pressure Gauge to know the Ready ness of the Extinguisher Squeeze Grip Handle As per IS:13849 with ISI mark (05 kg capacity) BRAND : FIRESTOP / FIREND / FIRE SHIELD

Providing,Fixing,Testing & Commissioning of Mild Steel Black Pipe(IS:1239part-I) Heavy class including cutting, screwing, welding etc. and providing all fittings viz forged steel screwed fitting upto 50mm dia and bolt welded above 50mm dia flanges, bends, tees, reducers, elbow, clamps, hangers etc including cutting holes and chases in brick or RCC walls/ slabs and making good the same to the approval of Engineer-in-charge/ consultant complete including painting with one coat of primer and two or more coats of synthetic enamel paint of approved make and shade including steel work complete as required. (Make:TATA/JINDAL/NEZONE) 25mm dia

50mm dia

65mm dia

80 mm dia

100 mm dia

150mm dia

Providing ,Fixing,Testing & Commissioning of G.M. Stop Valve ISI Marked screwed type tested to 30Kg/cm2 pressure as per IS:778-1984 of following sizes complete as reqd. 25 mm dia

Supply, Installation, Testing, Commission of Addressable Wall Mounting Sounder / Hooter Cum Strobe Brand : MORLEY/FIRELITE/Apollo or equivalent as approved by the Deptt.)

Supply, installation, testing & commissioning of intelligent plug in photo electric Smoke Detectors having features like integral communication, dual LED for 360° viewing angle, walk test with address display etc. UL / LPCB approved, make : HONEYWELL, MORLEY IAS, Model : MI - PSE or equivalent as approved by the Deptt.

Supply, installation, testing & commissioning of Response Indicator to give visual indication of detection of smoke - RED colour LED for indication. make - Agni Suraksha, or equivalent as approved by the Deptt.)System Sensor.

Supply, installation, testing & commissioning of 5 Loop Intelligent / Analogue Addressable Fire Alarm Panel Microprocessor based character display Network option built in Alarm, Trouble & supervisory relays LPCB listed. make : HONEYWELL, MORLEY IAS or equivalent as approved by the Deptt.)

Supply, installation, testing & commissioning of intelligent plug in photo electric Smoke Detectors having features like integral communication, dual LED for 360° viewing angle, walk test with address display etc. UL / LPCB approved, make : HONEYWELL, MORLEY IAS, or equivalent as approved by the Deptt.)

Supply, Installation, Testing & Commissioning of Manual Call box made of M/s. Aluminium dia cast with epoxy coated paint with hammer & chain. make :AGNI / System Sensor or equivalent as approved by the Deptt.)

Supply, Installation of photo electric Smoke Detect mounting base. make : Apollo/Notifier/System Sensor or equivalent as approved by the Deptt.)

Supplying, installation of photo Luminescent exit board in RED/GREEN colour of size 300X150mm

Supply, Installation, Testing & Commissioning of Response indicator fitted on suitable type box with cover

Supplying, installation, testing & commissioning of photo electronic Smoke Detector with mounting base complete in all respect.make:- APOLLO/Notifier/System Sensor or equivalent as approved by the Deptt.)

Supplying, installation, testing & commissioning of response Indicator fitted on suitable Type box with Cover wherever required complete in all respect.( make - Agni Instrument or equivalent as approved by the Deptt.))

Supply & fixing of 2X1.5sq. mm. PVC insulated copper Armoured Cable on surface/ recess/ above false ceiling etc. as required. (ISI marked) )

Control Panel for Fire Pumps

Heradesign ( Germany ) :- Supply and installation of acoustics frabric pasted Heradesign Fine of size 600x1200x25mm thk by using H-Splines mounted on Strut (having density 12.4 Kg/m3, Sound absorpation value aw up to 0.90 , Reaction to fire according to EN 13501-1:B-s1,dO ,Strut is fixed Horizontal to the wall at every 600mm c/c. Perpendicular to Strut position first fix H-Splines, Insert Panel into H-splines section and against wall. The Heradesign Fine panels will be back lined with Glass wool 50 mm 24kg density .

Veneer on BWP Plywood 1200x2400x12mm ( Green / Century ) Supply and installation of Plywood 1200x2400x12mm thk (12 mm thick ply having density of 500-600 Kg/m3, NRC 0.2, fire rating Class A ). 12mm ply is fixed on SoundStrut CC 50 by using fasteners. SoundStrut CC50\ to be fixed horizontally on the wall @ every 600mm c/c. Laminate of Vineer of Approved colour is then fixed on Plywood .

Heradesign Fine 15 mm ( Ebony Coloured Panels) : Supply and installation of Heradesign Fine wood wool panel ,factory painted, ( Made in Austria ) of size 1200 x 600 x 15mm mounted on proprietory supplied G I Frame work consisting of basic profile, main profile,edge profile and spacer.

Supply, Installation, Testing and Commissioning of Auditorium Chairs:- Center – Centre : 20" ( Minimum ) to 23" Maximum, Back – Back (Steps) : 36" ( Minimum), Total height of the Back From Floor Level : 39" - 41", Seat & Back – Inner Frames (Total weight 5.00 Kg):- 50 x 25mm Tube 16g with 3 serpentine springs, 25mm x 5mm thick MS Steel Frame with 3 zig zag springs: Weight: 3.00 Kg , Seat & Back Polyurethane Molded foam Cushion (Total wight 2.25 Kg):- Both Seat & Back Cushioned with 50 Density Non sagging molded Polyurethane foam, Fabric for Seat, Back & Side stands:- Seat, Back & Side stand covered/ upholstered with “Vimal Harmony” Brand Fire Retardant Grade fabric made by M/s Reliance Industries Limited, Fabric Lamination:- Seat, Back Top and Side stand Fabric further Laminated with 6mm thick U foam with polyester lining underneath for quilting and extra strength.

Supply, Installation, Testing and Commissioning of Auditorium Chairs:- Center – Centre : 20" ( Minimum ) to 23" Maximum, Back – Back (Steps) : 36" ( Minimum), Total height of the Back From Floor Level : 39" - 41", Seat & Back – Inner Frames (Total weight 5.00 Kg):- 50 x 25mm Tube 16g with 3 serpentine springs, 25mm x 5mm thick MS Steel Frame with 3 zig zag springs: Weight: 3.00 Kg , Seat & Back Polyurethane Molded foam Cushion (Total wight 2.25 Kg):- Both Seat & Back Cushioned with 50 Density Non sagging molded Polyurethane foam, Fabric for Seat, Back & Side stands:- Seat, Back & Side stand covered/ upholstered with “Vimal Harmony” Brand Fire Retardant Grade fabric made by M/s Reliance Industries Limited, Fabric Lamination:- Seat, Back Top and Side stand Fabric further Laminated with 6mm thick U foam with polyester lining underneath for quilting and extra strength.

Providing and installation of Toilet cubicle (of following standard dimension which includes 600mm door size width) made up of thermosetting resign treated high pressure ,self supporting decorative compact laminates with permanently incorporate anti-bacterial agents during manufacturing .Compact board should be resistance to water immersion through permissible increase on thickness and mass <0.60% and board density >1.35kg/cm3 and fulfilled the criteria of FSC and green guard gold certification and manufactured under IS2046 and EN438-2&3:2005 standard. 12mm thick compact board should be Moisture resistant, Impact resistant, termite resistant ,Scratch resistant ,Weather and climatic shock resistant. Finish of compact laminates should be suede finish which includes door, pilasters and intermediate panels finished with approved texture/shades as per IS2046 and fulfilled the criteria of fire retardant under BS-476/97 and EN438-6 with classification of BS1D0 standard. Pilaster to be supported by grade -6 Nylon polyamide thermoplastic palm designpedestal footing with non corrosive steel inserts and intermediate panels will attached to the wall with the help of approved aluminium U channel and all required hardware, made up of Nylon polyamide Grade-6 & aluminium powder coated as per manufacturer’s specification like Door knob, gravity hinges,Thumb turn locksets with occupancy indicators ,coat hooks with door stoper , U channel, top rail with corner connector, adjustable foot/pedestal,Rubber noice deafening tape, screw & wall plugs should be approved under the instruction of Engineer-in-charge. The top fitting should consist of Aluminium powder coated or anodized(Grade 6063) top rail which will get fixed with Mid & End plister. . All screw will of 304 grade in SS finish. All pilasters are supported by Nylon polyamide footing with non corrosive steel inserts.The base diameter 65mm and neck diameter of 33mm anchored to the floor with 304 grade SS screws with pust fit capping at a clearance height of 150mm .Finish and colour of Toilet cubical should be approved under guidance of engineer-in-charge.

1.1Toilet cubical with standard dimension of 1995mm(H)x1000mm(W)x1550mm(Depth), which includes 600mm door size width or as per drawing. Make: Greenlam Vibrance serene model or Equivalent Clearing and Grubbing Road Land.( Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth upto 300 mm, removal of stumps of trees cut earlier and disposal of unserviceable materials and stacking of serviceable materials to be used or auctioned upto lead of 1000 metres including removal and disposal of top organic soil not exceeding 150 mm thickness. (ii) By Mechanical Means A. In area of light jungle

Excavation in Soil using Hydraulic Excavator CK 90 & Tippers with Disposal upto 1000metres.(Excavation for roadwork in soil with hydraulic excavator of 0.9 cum bucket capacity including cutting & loading in tippers, trimming bottom & side slopes, in accordance with requirements of lines, grades & cross sections, loading & disposal of cut road with in all lifts & leads upto 1000 metres)

Construction of Subgrade and Earthen Shoulders ( Construction of subgrade and earthen shoulders with approved material obtained from borrow pits with all lifts & leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of table (300-2) (a), (Including cost of testing of materials at site and laboratory as directed by the deptt.) (b) from govt. land

Construction of Embankment with Material Deposited from Roadway Cutting ( Construction of embankment with approved materials deposited at site from roadway cutting & excavation from drain and foundation of other structures graded and compacted to meet requirement of table 300-2.)

(C) Cost of haulage excluding loading and unloading for a distance of 20 kms on surfaced gravel road.

GSB Granular Sub-base with Close Graded Material (Table:-400-2) Construction of granular sub-base by providing coarse graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with vibratory roller to achieve the desired density, complete as per cl. 401( with an initial lead of 5 Km.) (i) for grading-I Material

WBM Water Bound Macadam (Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with vibratory roller 8-10 tonnes in stages to proper grade and camber, applying and brooming requisite type of screening/binding material to fill up the interstices of coarse aggregate, watering and compacting to the reqd. density ( with an initial lead of 5.0 km.) A. By Manual Means (I) Grading I (a) Using Screening Crushable type such as Moorum or Gravel

PAVER BLOCK Providing and laying 80 mm thick factory made cement concrete paver block of M - 30 grade factory made by block making machine with strong vibratory compaction and of approved size and design/shape laid in required colour and pattern over and including 50 mm thick compacted bed of course sand, filling the joints with coarse sand etc. all complete as per the direction of Engineer - in - Charge at all levels. SUNROCK HIGH CTS tiles (Pavers) (Pavers) 80mm thick

Wiring for drawing sub-main line with P.V.C. insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel /Nicco / Anchor or Equivalent Make as approved by the Deptt.) PVC conduit (Berlia/ AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.) including earth continuity in surface/ recessed 20 mm. dia. 2mm thick/ heavy ISI marked IS: 9537 PART - III rigid PVC conduit wiring system. With 2 x 2.5 sq. mm. + earth continuity with 1x1.5 sq. mm. in 20 mm. dia. 2mm thick/ heavy rigid PVC IS: 9537 Part - III conduit.

With 2 x 6 sq. mm. + earth continuity with 1x 4 sq. mm. cable in 25 mm. dia. 2mm thick/ heavy rigid PVC IS: 9537 Part - III conduit.

With 2 x 10 sq. mm. + earth continuity with 1x 6 sq. mm. cable in 25 mm. dia. 2mm thick/ heavy rigid PVC IS: 9537 Part - III conduit.

Wiring for drawing sub-main line with P.V.C. insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel /Nicco / Anchor or Equivalent Make as approved by the Deptt.) in surface/ recessed PVC 20 mm. dia. 2mm thick/ heavy ISI marked IS: 9537 PART - III rigid PVC conduit (Berlia/ AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.) wiring system. With 4 x 16 sq. mm. + earth continuity with 2x10 sq. mm. cable in 40 mm. dia. 2mm thick/ heavy rigid PVC IS: 9537 Part - III conduit.

Wiring for 5 pin 6 amp plug with 1.5 sq mm P.V.C. insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel /Nicco / Anchor or Equivalent Make as approved by the Deptt.) including 5 pin 6 amp socket outlet (Anchor penta /Gold medal /Kolor kany.Kom/Havells or equivalent make as approved by the Deptt.)make) and 6 amp flush type switch (Anchor penta /Gold medal /Kolor kany.Kom/Havells or equivalent make as approved by the Deptt.)make) earthing the 3rd pin of the socket as required on the switch board in surface/ recessed P.V.C. conduit wiring system. When fitted on same board of light and fan.

Wiring to 5 a pin 6 Amps plug point with 1.5 sq. mm P.V.C. insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel /Nicco / Anchor or Equivalent Make as approved by the Deptt.) in surface/ recessed 2 mm thick/ heavy rigid ISI marked IS: 9537 PART - III rigid PVC conduit (Berlia/ AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.) wiring system including earth continuity with 1.5 sq. mm. cable to third pin of the plug socket etc. as required complete. Short point up to 3.00 metre. length.

Medium point up to 6.00 metre. Length.

Long point up to 10.00 metre. Length.

Wiring for 5/6 pin 16 Amps power plug point with 4 sq. mm. P.V.C. insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel /Nicco / Anchor or Equivalent Make as approved by the Deptt.) in surface/ recessed conduit wiring system including earth continuity with 2.5 sq. mm cable to the 3rd pin of the socket as required complete with 20 mm. dia. 2mm thick/ heavy ISI marked IS: 9537 PART - III rigid PVC conduit (Berlia/ AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.) Short point up to 3.00 metre. length.

Medium point up to 6.00 metre. Length.

Long point up to 10.00 metre. Length.

Wiring for light/fan/call bell point with 3x1.5 sq. mm. P.V.C. insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel /Nicco / Anchor or Equivalent Make as approved by the Deptt.) in surface/ recessed conduit wiring system with 20mm dia 2mm thick / heavy rigid PVC IS: 9537 Part - III conduit (Berlia/ AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.) ceiling rose etc. complete Short point up to 3.00 metre. length.

Medium point up to 6.00 metre. Length.

Long point up to 10.00 metre. Length.

MODULAR SWITCH Supplying including and fixing of following Metal boxes for MODEL RANGE LEGRAND (MYRIUS), ANCHOR (VIOLA), MK (WRAPAROUND/ PLUS), ABB (CHEIRON), KOLORS (KREST), SCHNEIDER (VIVACE), CRABTREE in surface/ recessed system complete as per direction of department. 3 module type Metal

4-5 module type Metal

6-8 module type Metal

12-16 module type Metal

Supplying including fitting fixing of following front plate of suitable colour MODEL RANGE LEGRAND (MYRIUS), ANCHOR (VIOLA), MK (WRAPAROUND/ PLUS), ABB (CHEIRON), KOLORS (KREST), SCHNEIDER (VIVACE), CRABTREE as per direction of department. 3 module

4 module

6 module

8 module

10 module

16 module

Supplying with fitting fixing of blank plate single in modular switch system MODEL RANGE LEGRAND (MYRIUS), ANCHOR (VIOLA), MK (WRAPAROUND/ PLUS), ABB (CHEIRON), KOLORS (KREST), SCHNEIDER (VIVACE), CRABTREE complete as per direction of department.

Supplying with fitting and fixing of 100 watt electronic modular fan speed controller 4 - Step 2 - module type MODEL RANGE LEGRAND (MYLINC), ANCHOR (ROMA), MK (IVORY), ABB (CLASSIC), KOLORS (KRAZE), SCHNEIDER (OPAL), PHILIPS, Havells including making necessary connection as per direction of department.

Supplying including installation of socket outlet 6/16 Amps 3/5 pin combine shuttered complete , MODEL RANGE LEGRAND (MYLINC), ANCHOR (ROMA), MK (IVORY), ABB (CLASSIC), KOLORS (KRAZE), SCHNEIDER (OPAL), PHILIPS, Havells including making necessary connection as per direction of department.

Supplying including installation of socket outlet 6 Amps 3 pin combine shuttered complete , MODEL RANGE LEGRAND (MYLINC), ANCHOR (ROMA), MK (IVORY), ABB (CLASSIC), KOLORS (KRAZE), SCHNEIDER (OPAL), PHILIPS, Havells including making necessary connection as per direction of department.

Supplying with fitting fixing of 16 amp one way modular clip in switch, MODEL RANGE LEGRAND (MYLINC), ANCHOR (ROMA), MK (IVORY), ABB (CLASSIC), KOLORS (KRAZE), SCHNEIDER (OPAL), PHILIPS, Havells including making necessary connection as per direction of department.

Supplying with fitting fixing of 6 amp one way modular clip in switch, MODEL RANGE LEGRAND (MYLINC), ANCHOR (ROMA), MK (IVORY), ABB (CLASSIC), KOLORS (KRAZE), SCHNEIDER (OPAL), PHILIPS, Havells including making necessary connection as per direction of department.

FITING AND ACCESSORIES Supplying and fixing of 250/305 mm dia (Nominal size flush type circular ceiling fittings complete with holder, Aluminium anodized back plate and brass holder, 20 Watt CFL lamp including connection as approved by the Deptt.)as required. [CLT]

Supplying and fixing of Fan box (AKG or equivalent as approved by the Deptt.)with inbuild rod as required.

MCB DB (ABB, SCHNEIDER MG, LEGRAND, HAGER MAKE) & (SCHNEIDER NEO BREAK, C&S, Havells, INDOASIAN, HPL OR EQUIVALENT MAKE AS PPROVED BY THE DEPTT.) MCB IN-comer SPN DB Supplying with fitting and fixing sheet steel, phosphatised, powder painted dust & vermin proof Double door IP-43 surface mounting SPN MCB DB incorporated with bas-bar, Neutral link, Earth bar and din rail etc fitted on wall with grouting nuts & bolts as reqd. complete with making necessary connection as approved, specified and directed by the deptt. ABB, Schneider MG, legrand, Hager make) 6 way SPN Double Door

12 way SPN Double Door

MCB IN-comer TPN (Horizontal DB) Supplying with fitting and fixing sheet steel, phosphatised, powder painted dust & vermin proof Double door IP-43 double door surface mounting TPN MCB DB incorporated with bas-bar, Neutral link, Earth bar and din rail etc fitted on wall with grouting nuts & bolts as reqd. complete with making necessary connection as approved, specified and directed by the deptt. ABB, Schneider MG, legrand, Hager make) 8 way TPN (4+24) double door

MCB, MCCB, RCCB, RCBO (ABB, SCHNEIDER MG, LEGRAND, AND HAGER MAKE) & (SCHNEIDER NEO BREAK, C&S, Havells, INDO ASIAN, HPL OR EQUIVALENT MAKE AS PPROVED BY THE DEPTT.) MCB (Conform to IS / IEC 60898-1:200/ MCCB (Conform to IS/IEC 60947- RCCB (Conform to IS/IEC 12640 / 61008) Supplying with fitting and fixing single Pole 10 KA 240/415V 50Hz MCCB of the following capacity complete with making necessary connection as approved, specified and directed by the deptt. C Series(Schneider MG, legrand, Hager make) 6 to 32A

Supplying with fitting and fixing DP 10 KA 240/415V 50Hz MCCB of the following capacity complete with making necessary connection as approved, specified and directed by the deptt. C Series(ABB, Schneider MG, legrand, Hager make) 6 to 32A

Supply, installation & testing of G.I. earth station with perforated 40 mm dia and 4.50 Metre long heady duty G.I. pipe with necessary 40 mm dia. G.I. Fittings such as Socket, Tee, elbow, nipple and 50 mmx40 mm G.I. reducing socket for funnel including locking arrangement 300 mmx300 mmx6 mm hinged cover C.I. earth plate complete with digging of earth pit, construction of brick chamber and plastering of both inner & outer surface of wall as specified and directed by the deptt .

Extra for using salt (5 K and Charcoal (64 K in pipe Earth Station pit to provide low impedance ground in location of high soil resistivity as and when required and specified by the Deptt.

Supplying & laying of 6 SWG G.I.. earth drawn through 15 mm dia. Medium quality G.I. pipe from Earth Electrode (below G.L.) to electrical switch gears or electrical machineries including making necessary connection as approved, specified and directed by the deptt.

Supplying & laying of 25X5mm size G.I. strips drawn on surface from earth electrode to Electrical switch gears, machineries etc complete with supply of G.I. nuts & bolts, screws etc including riveting, soldering & making necessary connection as approved, specified and directed by the deptt.

CEILING FAN, EXHAUST FAN AND AIR CURTAIN Supplying including fitting fixing of following A.C. Ceiling fan complete with all accessories like down rod, canopy etc. of following sweeps with making necessary connection as approved by the Deptt.)as required complete and as directed by the Department [Without regulator]. Standard model 1200 mm Sweep Usha make)/ Standard model 1050 / 1200 mm Sweep Havells make)/ High speed 1200 mm sweep (ORIENT PSPO make) [F]

Standard model 1400 mm Sweep. "ORIENT PSPO make) / Usha make)/ CROMPTON make)/ Havells/ ATC/ V GAURD make) [FF]

Supplying including fitting fixing of following A.C. Exhaust fan in the existing hole on the wall of following sweeps with making necessary connection as approved by the Deptt.)as required complete and as directed by the Department. Domestic Trans Air 300 mm sweep (Crompton make)

Supplying with fitting and fixing of LED Foot lamp with Box MODEL RANGE LEGRAND (MYRIUS), ANCHOR (VIOLA), MK (WRAPAROUND/ PLUS), ABB (CHEIRON), KOLORS (KREST), SCHNEIDER (VIVACE), CRABTREE including making necessary connection as per direction of department.

Auditorium Stage Light Supplying installation testing and commissioning of 1000 W Halogen profile light consisting of 2 nos.150mm dia PC lenses, imported socket, ellipsoidal anodised alluminium reflector, 1000W halogen BipinT-11 lamp, yoke colour frame & suitable clamp Make: Canara Lighting

Supplying installation testing and commissioning of 1000 W Halogen light with mash & barndoor consisting of 2nos. single contact compressible holders, yoke, 1000W halogen tube & suitable clamp.Make: Canara Lighting

Supplying installation testing and commissioning of Floor mounted dimmer rack with 48 nos single phase 5KW electronic dimmers to be distributed in 3 phases with suitable bus bar arrangement housed in sheet metal enclosure.0-10 volt Digital output, output light indicator, local controls etc..Make Canara Lighting

Supplying with fitting and fixing panel mounting open execution 35/36KA 415V 50Hz 4P MCCB (Ics=Icu, adjustable Ir setting 0.7) without enclosure) of the following capacity complete with making necessary connection as approved, specified and directed by the deptt. 35/36 KA 415V 50 Hz 4P MCCB (Schneider, legrand, Siemens make) 160A

Supplying with fitting and fixing DP 10 KA 240/415V 50Hz MCB of the following capacity complete with making necessary connection as approved, specified and directed by the deptt. B Series (ABB, Schneider MG, legrand, Hager make) 40A

Supplying with fitting and fixing 4P 10 KA 240/415V 50Hz MCB of the following capacity complete with making necessary connection as approved, specified and directed by the deptt. B Series (Schneider MG, legrand, Hager make) 6 to 32

Supplying with fitting and fixing Four Pole 415V Front handle operated On Load Change over switch (IP-20 protection powder painted sheet steel enclosure fitted on angle iron frame of the following capacity complete with making necessary connection as approved, specified and directed by the deptt. ABB, Schneider, legrand, L&T make) 200A

Supplying installation, testing, programming and commissioning of Audio equipment, Dual Channel Digital Power Amplifier, 3000 W@ 2 ohm, 2100W @ 4 ohm, 1200 W @ 8 ohm per channel Crown (or equivalent as approved by the Deptt.)

Supplying installation, testing, programming and commissioning of Audio equipment, Professional dynamic mic for lead & backing vocals on stage with on off switch Crown (or equivalent as approved by the Deptt.)

Supplying installation, testing, programming and commissioning of Audio equipment, Frequency agile cable less microphone system including SR45 Stationary Receiver, PT45 Pocket Transmitter, SMPS Switched Mode Power Supply (EU/US/UK), C555L Head worn Microphone, 1 AA Battery Crown (or equivalent as approved by the Deptt.)

Supplying installation, testing, programming and commissioning of Audio equipment, Rugged 30 cm gooseneck or equivalent as approved by the Depts. with integrated 5‐pin XLR connection (or equivalent as approved by the Deptt.) & phantom power adapter, provides 2 additional pins for LED control & programmable on off switch AKG or equivalent as approved by the Deptt.)

Supplying installation, testing, programming and commissioning of Audio equipment, Networked signal processor and fault‐tolerant bus chassis ‐ requires up to four input / output cards BSS (or equivalent as approved by the Deptt.)

Supplying installation, testing, programming and commissioning of Audio equipment,Mono Inputs- 24 Ch, Stereo Inputs- 2 Ch, Sub Group- 4(paired sends ),Maste4r Outputs- L/R + Mono, EQ- 2fixed, 2Swept, Filters- 100Hz HPF,AUX Sends - 6(4Pre/Post), FX Returns- 2 Sound craft (or equivalent as approved by the Deptt.)

Supplying installation, testing, programming and commissioning of Audio equipment,2x6 Loud speaker Management System w/ Display dbx (or equivalent as approved by the Deptt.)

Supplying installation, testing, programming and commissioning of Audio equipment,15” Two‐way Portable Speaker System, 400 watt Continuous Power Capacity. 15” Differential Drive Woofer and a 1.5 ” Annular Polymer Diaphragm Compression Driver, DuraflexTM‐ Covered 16/18 mm Plywood Enclosure, 16 Gauge Steel Grille, Dual 35mm Pole Mount Socket, Non‐Skid Rubber Feet. JBL (or equivalent as approved by the Deptt.)

Supplying installation, testing, programming and commissioning of Audio equipment, Dual 18” Portable Subwoofer System, 1000 watt Continuous Power Capacity. Two 18” VCGTM Woofer in a DuraflexTM‐ Covered,18 mm Plywood Enclosure, 16 Gauge Steel Grille, Die‐Cast Metal Handles, Non Skid Rubber Feet. JBL (or equivalent as approved by the Deptt.)

Supplying installation, testing, programming and commissioning of Audio equipment, Dual 15" Two‐Way System in a Trapezoidal Enclosure; 2 x 2265H Differential Drive® LF; 2452H 4" (Diaphragm) HF on 70° x 50° Horn; Passive or Bi‐Amplified Operation. JBL (or equivalent as approved by the Deptt.)

Supplying installation, testing, programming and commissioning of video equipment, Mini Coax High−Resolution Cable , COAX CENTER CONDUCTOR: 28 AWG 7/36 tinned copper Kramer (or equivalent as approved by the Deptt.)

Supplying installation, testing, programming and commissioning of video equipment,14 Conductor Presentation/VGA Cable , CONDUCTOR: 26 AWG 7/34 tinned copper , CENTER CONDUCTOR: 0.48mm (0.019in). Kramer (or equivalent as approved by the Deptt.)

Supplying installation, testing, programming and commissioning of Audio equipment, Single Shielded multipair cable , 8 Core , Jacket - PVC black, ø 0.13 in (number Gotham (or equivalent as approved by the Deptt.)

Supplying installation, testing, programming and commissioning of Audio equipment, High flexible Speaker cable for power amplifiers up to 4000 watts , Jacket - PVC, ø 0.37 in, black ,Conductor resistance = < 1.42 Ohm /1000 ft , Conductor - Stranded bare copper cables, 25x38 AWG (24AW Gotham (or equivalent as approved by the Deptt.)

Supplying installation, testing, programming and commissioning of Audio and video equipment, 4300 Lm WUXGA Installation Projector , 4300 lumens 3LCD Projector 2000:1 Contrast Ratio Native WUXGA (1920 x 1200) Resolution Up to 4000h , 3 LCD System . Sony (or equivalent as approved by the Deptt.)

Supplying installation, testing, programming and commissioning of Audio and video equipment, Motorised screen with RF remote control , Size -8 Ft / 6 Ft , 4:3 Aspect Ratio

Supplying installation, testing, programming and commissioning of Audio equipment,XLR Speak on Cable 4 pole connection Neutrik (or equivalent as approved by the Deptt.)

Supplying installation of Audio equipment, SPEAKER STANDS , Holds up to 50 kg. Wt: 2.45 kg, H: 1270/1930 mm

Supplying installation of Microphone Floor Stand , H: 890 -1600 mm, BL: 680 mm, Weight: 1.85 kg

Supplying installation of Projector ceiling Mount

INVERTER/ UPS AND RACK FOR LAN WORKS/ LAN WORKS/ AVR 3 KVA On-Line UPS System (Orion or equivalent make as approved by the Deptt.) with PWM-IGBT technology 230V AC Input (160V – 280V A 1 Ph input- 1 Ph output With Isolation Transformer 2.4KW output with 0.8 output PF 30 min backup using SMF battery Supplying, installation of LAN works accessories as directed and specified and directed by the Deptt. "APW Cyber Rack Server Rack 42U APW President Enclosure, 600mmW CYBERACK 42U / 1000mmD (CRCA Steel Frame with Aluminium Profiles & 2 Nos. of Removable Side Panels with following items: - Top cover with cable entry -1no. - Bottom cover with cable entry -1no. - 19” Mounting Angles – 2 pairs. ,Finish : Powder coated to 80 microns; Matt finish. colour : BLACK with , Load rating capacity -- 500 kgs., Front side vented glass door and rear full perforated steel door with locks. ""PDU 10*5/15A - 01 Nos Fan Housing Unit with 4 Fans - 01 Set Mounting Hardware (Set of 20) - 1 Set Castor with Brake - 2 Nos. Castor without Brake - 2 Nos. Earthing Kit - 01 Set"

Variable Refrigerant Volume / Flow System Supply Installation, testing and commissioning of Modular type outdoor units, with all multi scroll DC Inverter compressors for cooling & heating applications. The unit runs with inverter compressor only. All inverter capacity controlling compressors shall be suitable for 415 ± 10% volts, 50 Hz. special coated fins, panel, inverter based condenser fan M.S. hot dip galvanised stands / supports, electrical & microprocessor panel, isolating valves and all the necessary accessories for proper functioning of the units. All ODUs are having Hi-POR technology for Oil return mechanism to high pressure side and Active Refrigerant Control systems to increase efficiency and performance of the unit. The manufacturer must be OEM for this project and must have manufacturing and testing facility in India. Unit shall yield COP of 3.69 at 100% load at AHRI condition ( Ambient 35Deg DBT & Inside : 19Deg WBT) . Conderser shall be capable to operate for outside ambient of 53 Deg C. All Outdoor unit must have " Ocean Black Fin " heat exchanger in the unit in dual layered & double sided with a black coating to shield it from Salt, Sand & other elements brought in by the air. The Manufacturer must be OEM for this project and must have manufacturing and testing facility in India. Makes - LG Electronics, Mitsubishi Electric, O General, Daikin Outdoor Unit 10 HP

Indoor Units Supply Installation, testing and commissioning of ductable type unit of following Capacities. The unit is having inbuilt drain pump. Capacity 4.01 TR

Capacity 6.33 TR

Capacity 8 TR

Supply Installation, testing and commissioning of 4-Way Cassette unit of following Capacities. The unit is having inbuilt drain pump. Cassette Type 1.59 TR /599 CFM Min

Cassette Type 2 .01 TR/668 CFM Min

Cassette Type : 3 TR/ 951 CFM - min

Cassette Type : 4.5 TR/ 1347 CFM - min

Cassette Grill

Ventilation System Providing and fixing of Centrifugal Rectangular Inline Fan / Tube Axial Fan including motors , starters , standard accessories like louvers , dampers etc , Recangular ducts, exhaust grilles and Fan supporting arrangements for Fresh air as per specification . 18000 CFM

Supply Installation, testing and commissioning of Imported fittings Y-joints and headers etc.

Supply Installation, testing and commissioning of Wireless remote controls

Supply Installation, testing and commissioning of Wired remote controls

Refrigerant Pipe Supply, installation, testing & commissioning of interconnecting refrigerant copper pipe work with (19 mm / 13 mm thick) nitral rubber insulation between each set of indoor & outdoor unit as per specifications, all piping inside the room shall be properly supported on M.S. tray hanger as per specification and drawings. 53.98 mm O.D.(insulation : 19 mm) (Wall Thickness 1.2mm)

41.30 mm O.D.(insulation : 19 mm) (Wall Thickness 1.2mm)

38.10 mm O.D.(insulation : 19 mm) (Wall Thickness 1.2mm)

34.90 mm O.D.(insulation : 19 mm) (Wall Thickness 1.2mm)

31.80 mm O.D.(insulation : 19 mm) (Wall Thickness 1.1mm)

28.58 mm O.D.(insulation : 19 mm) (Wall Thickness 1.0mm)

25.40 mm O.D.(insulation : 19 mm) (Wall Thickness 1.0mm)

22.20 mm O.D.(insulation : 19 mm) (Wall Thickness 1.0mm)

19.05 mm O.D.(insulation : 13 mm) (Wall Thickness 1.0mm)

15.88 mm O.D.(insulation : 13 mm) (Wall Thickness 1.0mm)

12.70 mm O.D.(insulation : 13 mm) (Wall Thickness 0.8mm)

09.52 mm O.D.(insulation : 13 mm) (Wall Thickness 0.8mm)

06.35 mm O.D.(insulation : 13 mm) (Wall Thickness 0.8mm)

Supply, Installation and Testing of return air grilles/ diffusers as per specifications and drawings. Jet Diffuser (300 mm external Dia.) with damper

Jet Diffuser (400 mm external Dia.) with damper

Jet Diffuser (300 mm external Dia.) without damper

Jet Diffuser (400 mm external Dia.) without damper

Supply air grille with VCD (400 x 150 mm)

Return Continous grill without VCD

Supply, Installation and Testing of 16 G GI Frame Motorised Fire Damper - as per UL 555 and 90 minutes rating 2000 x 600 mm

Motorized Volume Control Duct Dampers: Supply, Installation and Testing of 16 G GI Frame / 20G GI aerofoil blades type Volume Control Duct Dampers complete with linkages, levers, fittings, supports, all accessories any other item required to make the system complete with motorised control. 2000 x 775 mm

Fresh Air Volume Control Damper Supply, Installation and Testing of 16 G GI Frame / 20G GI aerofoil blades type Volume Control Duct Dampers complete with linkages, levers, fittings, supports, all accessories any other item required to make the system complete. 200 x 100 mm

Supply & installation of CPVC piping complete with fittings, supports and duly insulated with 9 mm thick closed cell nitral rubber insulation. 19 mm dia

Control & Transmission Wiring Providing & fixing control cum transmission wiring of 2 core X 1.5 sqmm shielded copper cable in suitable conduits between indoor and out door unit and between corded remote and indoor unit.

GI Ducting Supply & fabrication of 24G (Tata) GI sheet rectangular duct complete with MS angle support. 24 SWG

Canvas Connection Supply, installation, testing & commissioning of flexible connection between duct & M/c.

Supply, installation, testing & commissioning of extruded aluminium powder coated grill/ diffuser for supply and return air

Supply of R-410A Refrigerant Gas

Supply and Installation of 450 Watts continuous, 1,800 Watts peak power; Dual 2 Way 8" Line Array Element. Bi-amp operation for high output and controlled dispersion; Wide 100° H x 10° V dispersion for even coverage; Frequency Response; Maximum SPL LF: 121 dB continuous, 127 dB peak, HF: 119 dB continuous, 125 dB peak; Impedance; LF: 16 Ohms, HF: 16 Ohms, Make:Turbosound/ Tannoy/ Martin Audio

Supply and Installation of Fly Bar for TLX84 and TLX215L Suspended Arrays Make:Turbosound/ Tannoy/ Martin Audio

Supply and Installation of 4-channel amplifier with Lake DSP,Dante Digital Audio networking and advanced system integrity monitoring delivering 4 × 2000 W @ 2 ohms & 4 Ohms,4 × 1500 W @ 8 ohms,4 × 750 W @ 16 ohms ,2000 W @70V RMS & 100V RMS,Class TD Make: Labgruppen/ Behringer/ Powersoft

Subwoofer Supply and Installation of 1,000 Watts continuous, 4,000 Watts peak power; Compact Dual 15" Subwoofer with Integral rigging system for suspending or ground stacking with TLX84; Frequency response 48 Hz - 150 Hz ±3 dB;Maximum SPL 131 dB continuous, 137 dB peak; Impedance 4 ohms. Make:Turbosound/ Tannoy/ Martin Audio

Supply and Installation of 4-Channel Class D Power Amplifier delivering 4 x 800 W @ 2 Ohms, 4 x 1000 W @ 4 Ohms/8 ohms and 4 x 700 W @ 16 ohms,1000 W into 70V/100V with LAKE DSP, DANTE digital Audio Networking and Advanced System Integrity Monitoring Make:Labgruppen/ Behringer/ Powersoft

Front Fill Speaker Supply and Installation of 200 Watts continuous, 800 Watts peak power; 12" Dual Concentric Full Range Loudspeaker; Precise 90º dispersion for optimum coverage and forward projection; Maximum SPL 120 dB continuous, 126 dB peak; Impedance 8 Ohms. Make: Turbosound/ Tannoy/ Martin Audio

Supply and Installation of 2 x 300 Watts @ 8 Ohms Power Amplifier With Adjustable High-pass And Low-pass Filters;Signal To Noise Ratio >102 dBA; THD at 1 kHz and 1 dB below clipping <0.05% Make: Labgruppen/ Behringer/ Powersoft

Under Balcony Speaker Supply and Installation of 200 Watts continuous, 800 Watts peak power; 12" Dual Concentric Full Range Loudspeaker; Precise 90º dispersion for optimum coverage and forward projection; Maximum SPL 120 dB continuous, 126 dB peak; Impedance 8 Ohms. Make: Tannoy/ Turbosound/ Martin Audio

Supply and Installation of 2 x 300 Watts @ 8 Ohms Power Amplifier With Adjustable High-pass And Low-pass Filters;Signal To Noise Ratio >102 dBA; THD at 1 kHz and 1 dB below clipping <0.05% Make: Labgruppen/ Behringer/ Powersoft

Stage Monitor Speaker Supply and Installation of 1100 Watt 2 Way 15" Full Range Powered Loudspeaker with KLARK TEKNIK DSP Technology;1" High Temperature Dome Compression Driver With Extended High Frequency Reproduction Make: Turbosound/ Tannoy/ Martin Audio

Control Room Speaker 70 Watts (Cont.) 8" Coaxial Surface-Mount Loudspeaker System With 19mm (0.75”) High Frequency Transducer; Frequency Response (-3dB) 75Hz - 20kHz; System Sensitivity (1W @1m) 90dB; Nominal Impedance 6 Ohms. Make: Tannoy/ Turbosound/ Martin Audio

Ultra-Lightweight, High-Density Power Amplifier Delivers 2 x 500 Watts into 2 Ohms; 2 x 300 Watts into 4 Ohms; 1000 Watts into 4 Ohms (bridge mode) make; Behringer/ Labgruppen/ Powersoft

Green Room Speaker Mid-size All-weather, Surface Mount Loudspeaker With A Coaxially Mounted 19 mm (0.75 inch) Dome Tweeter; Frequency Range Of 65Hz to 30 kHz And Is Capable Of Handling 120 Watt Programme Material And Peaks up to 240 Watts. System Sensitivity (1 W @ 1 m)2 88 dB; Nominal Impedance 6 Ohms. Make: Tannoy/ Turbosound/ Martin Audio

Ultra-Lightweight, High-Density Power Amplifier Delivers 2 x 500 Watts into 2 Ohms; 2 x 300 Watts into 4 Ohms; 1000 Watts into 4 Ohms (bridge mode) Make: Behringer/ Labgruppen/ Powersoft

DSP & DI Box Supply and Installation of Advanced Digital Audio Processor with Confi gurable DSP, Audio Networking and Acoustic Echo Cancellation; 10 high-headroom analogue universal mic/line inputs, 6 electronically balanced low impedance line level outputs Make: Klarkteknik/ Biamp/ Clearone

Supply and Installation of 8 Channel Output Box with ULTRANET Connectivity Make:Klarkteknik/ Biamp/ Clearone

Supply and Installation of Active DI Box with Extended Dynamic Range Make: Klarkteknik/ Biamp/ Clearone

Mixing Console Supply and Installation of 40-Input, 25-Bus Digital Mixing Console with 32 Programmable MIDAS Preamps, 25 Motorized Faders, Channel LCD's, 32-Channel Audio Interface and iPad/iPhone* Remote Control. Make: Behringer / Midas/ Allen & Heath

Supply and Installation of 32 Channel Stage Box. Make: Behringer / Midas/ Allen & Heath

Microphones Supply and Installation of Wireless Vocal Hand Held Microphone Set With Super-cardioid Dynamic Microphone; Enhanced Frequency Bank System With Up To 32 Compatible Frequencies; Frequency Response 80Hz - 18KHz; THD, Total Harmonic Distortion < 0,9 %. Make: Sennheiser/ Beyerdynamic/ Shure

Supply and Installation of 450 mm (17,72“) Gooseneck Microphone With Cardioid Directivity Microphone Capsule; Frequency Response Of 50 Hz - 20 KHz; Nominal Impedance <100 Ohm; Maximum Sound Pressure Level 130 dB SPL. Make: Sennheiser/ Beyerdynamic/ Shure

Supply and Installation of Solid table stand for XLR-5 gooseneck microphones with lighting ring;Output voltage Logic out: high level output voltage > 2.4 V, low level output voltage < 0.4 V, Logic in: high level input voltage > 2.0 V, low level input voltage < 0.8 V. Make: Sennheiser/ Beyerdynamic/ Shure

Supply and Installation of Wired,Dynamic Super-cardioid Microphone For Speech And Vocals With Noiseless On/Off Switch. Make: Sennheiser/ Beyerdynamic/ Shure

Supply and Installation of E 600 SERIES Drum Kit set( e602 x1, e604 x4, e 614x2, Steel Drum case x1). Make: Sennheiser/ Beyerdynamic/ Shure

Supply and Installation of Long Microphone Stand. Make: K&M/ Ahuja

Cables & Connectors Supply and Installation of Of High Flexible Speaker Cable For Power Amplifiers Up To 4000 Watts. 224 Strands Of 0.15 mm Bare Cupper Wires. Make: Gotham/ Klotz/ Canare

Supply and Installation of Audio Signal Cable;Balanced microphone cable with single shield, high flexible, velvet faint PVC-Jacket , Conductor: Stranded bare copper wires 28 x 0.10 mm (0.22mm²) , Jacket: PVC, 6.0 mm max. Ø . Make: Gotham/ Klotz/ Canare

XLR connectors Male. Make: Amphenol/ Neutrik

XLR connectors Female. Make: Amphenol/ Neutrik

1/4"Unbalanced Phono Plug. Make: Amphenol/ Neutrik

1/8" (3.5mm) Balanced Phono Plug. Make: Amphenol/ Neutrik

Speakon connectors. Make: Amphenol/ Neutrik

Supply and Installation of 32U Equipment Rack. Make: Valrack/ Netrack/ APW

Supply and Installation of 10KVA Online UPS. Make: APC/ Vertive/ BPE

Supply, Installation Testing & Commissioning of 10000 Lumens WUXGA Projector. Panel size 17.0 mm (0.67˝) diagonal (16:10 aspect ratio) ; Display method DLP™ chip x 1, DLP™ projection system; Pixels 2,304,000 (1920 x 1200) pixels; Light source Laser diodes (Class 1); Screen size (diagonal) 1.27–15.24 m (50–600˝); Brightness 10,000 lm (Center); Contrast 10,000:1; Resolution 1920 x 1200 pixels. Make: Panasonic/ Sony/ Christie

Supply, Installation Testing & Commissioning of Zoom Lens for above Projector. Focal Distance:- 33.9- 53.2 mm, Throw Ratio:- WUXGA 2.3 - 3.6 : 1, Dimensions (W X H X D):- 95 X 95 X 168 mm.). Make: Panasonic/ Sony/ Christie

Supply and Installation of Harkness Perlux 180,1.8 Gain Screen Std Perf with Web and Eye Projection cum cyclorama screen of suitable size to be fixed in iron frame ( Iron frame at clients scope). Make: Harkness/ Draper/ Dallite

Supply, Installation Testing & Commissioning of Projector Wall Mount Base. Make: Custom

Supplying installation, testing, programming and commissioning of Video equipment HDMI HDBaseT Extender (4K@100m) (HDBaseT Class A): Video Input Interfaces 1 x HDMI Type A Female (Black), Max. Distance 1.8 m, Video Output Interfaces 1 x HDMI Type A Female (Black), Video Max. Data Rate 10.2 Gbps (3.4 Gbps Per Lane) 10.2 Gbps (3.4 Gbps Per Lane), Max. Pixel Clock Up to 340 MHz Up to 340 MHz, Compliance HDMI (3D, Deep Color, 4K) HDCP Compatible, Max. Resolutions / Distance Up to 4K@70m (Cat 5e/6) / 100m (Cat 6a), 1080p@100m, 4K supported: 4096 x 2160 / 3840 x 2160 @ 60Hz (4:2:0), 4096 x 2160 / 3840 x 2160 @ 30Hz (4:4:4). Make: Aten/ Kramar/ Extron

High Speed and Standard Speed HDMI cables; The 35 foot HDMI cables support the following resolutions: 480i, 480p, 720p, 1080i, 1080p; CONDUCTOR AWG 28 AWG (7/0.127); CABLE OD (MM) 7.3; STANDARDS COMPLIANCE HDR, HDCP. Make: Aten/ Kramar/ Extron

High Speed and Standard Speed HDMI cables of Length 1 Mtr. Make: Aten/ Kramar/ Extron

Supply, Installation, Testing and Commissioning of Escalator with Complete machine, truss and tracks, steps, comb plates, balustrades, handrails, safety devices wiring, control buttons, key switches etc as per requirements of technical specification and drawings as approved by the Dept.

Supplying installation, testing and commissioning of 13 passenger (884 Kg.) Model : GEN 2 COMFORT with stainless steel ()machine room less) lifts having contract speed of 1 MPS serving different floors in the lift shaft as per detailed specification enclosed and as under: 1. No. of Elevators 1 No. 2. Type GEN 2 COMFORT MRL 3. Capacity Passenger - 13 Persons - 884 Kg 4. Speed 1.0 Metre/Sec (approx.) 5. Control ACVVF - OTIS Variable Frequency with speed encoder. 6. Operation Simplex Full Collective Control. 7. Controller Microprocessor based modular control system ( Location door column at top floor 8. Communication Loop type serial communication 9. Travel GF to 4th Floor , about 12.0 Metres. 10. Stop & Opening 5 Stops 5 Levels 5 Openings (All opening on the same side 11. 10. Power Supply 400 V ± 10% variation ,three-phase 50 Hz ± 5% variation 12. Machine Gearless with permanent magnet motor located in the shaft at top. 13. Rope Flat poly urethane - coated belts 14. Cab finish Powder painted with painted ceiling design (CD - 41) handrails in car and vinyl flooring. 15. Cab ventilation Pressure fan 16. Cab Size 1600 mm Wide x 1350 mm Deep approx. 17. Shaft size required 2300mmx 1700mm(WX 18. Entrance type Centre opening. 19. Fire rating One hour fire rated. 20. Entrance opening 900mmx 2000mm 21.Over head 4000mm 22. Pit depth 1300mm 23. Entrance protection system High Performance contact free infra red curtain - 2 dimensional 24. Door operation Power operated automatic sliding doors. 25. Door operator DC door operator system. 26. Human interface device (H ) Hall button with micro stroke push buttons combined with 16 segment digital LED display position indicator. Full height car operating panel with micro stroke call push buttons (located on side panel) Door open and door close button on the car operating panel. 2 way Intercommunication System Dot matrix position indicator display integrated with the car operating panel. Battery Operated Emergency Alarm and Light. Fireman's switch at main lobby Automatic rescue device.

Shree Gautam Construction Co Ltd