Segregation of running 18 Nos DTW Scheme Transformers from other consumer for quality power supply ESDs jurisdiction of under ED-Belonia.(Partial Trunkey basis).

Amount

Supply of the following :-

ACSR Weasal (6/1/2.59mm)

PVC CABLES (SINGLE CORE) 70 mm2

ACCESSORIES OF LT AERIAL BUNCHED CABLE Suspension Clamp (25-35 mm)

ACCESSORIES OF LT AERIAL BUNCHED CABLE Dead end Clamp (25-35 mm)

ACCESSORIES OF LT AERIAL BUNCHED CABLE 3-Ph. Dist. Box (25-50 mm)

ACCESSORIES OF LT AERIAL BUNCHED CABLE IPC Main 16-95 Sq. mm & Tap 4 to 35(50) Sq. mm

ACCESSORIES OF LT AERIAL BUNCHED CABLE - Eye Hook

Rewireable Porcelain Cut out 100 Amp

11KV Polymer composite 45 KN Disc Insulator

11KV Polymer Pin Insulator

L.T. Stay insulator

11 KV Stay insulator

11KV Disc fittings Up to 7/3.8mm, 2-U Bolt type

11KV Gang Operated Switch (Polymeric type)

LIGHTINING ARRESTOR 9 KV, 5KA Polymeric L/A

Stay set complete

GI Stay wire stranded stay wire 7-4mm

8SWG GI Wire

NUTS AND BOLTS 16 x 75 mm. (3)

NUTS AND BOLTS 16 x 90 mm. (4)

BIMETALLIC LUGS 95mm2 - 10

PCC pole 8m long

PCC pole 9m long

11 KV Drop out Switch DOF Polymeric 3ph

Channel 100x50x6mm (Galvanised)

Channel 75x40x6mm (Galvanised)

Angle 65X65X6mm (Galvanised)

11 KV Earthing Chemical with 3 Nos pipe earthing using 20mm dia GI pipe 2 mtrs. Long. making earth grid using 50x6mm GI Flat and riser and connecting risers to various equipment as per technical specifications, scope of works and approved drawings.

LT Aerial Bunched Cable 3x70 1x50 1x65 sqmm

Erection of the following

Erection of 9.0mtrs length of P.C.C POLE at any kind of soil upto a depth of 1/6 th of pole height, including excavation of earth, refilling the pit with with soil upto the ground level, ramming and making complete in all respect

Erection of Stay set direct in earth complete with 19mm x 1800 mm long stay rod, anchor plate of size 300 x 300 x 8 mm ,thimble, turn buckle, 7/3.15 mm dia G.I Standed stay wire and stain insulator etc. with Supply of M.S.Clamp,Nuts & Bolts etc. as required. and making complete in all respect

Erection of M.S.Angle Cross-Arm,1.0 to 2.5 Mtr.Long 65 x65 x 6 mm ( Excluding the cost of BackClamp, Nuts & Bolts)

Erection of M.S.Channel Cross-Arm,0.3 to 1.2 Mtr.Long75 x40 x 40 x 6 mm ( Excluding the cost ofBack Clamp, Nuts & Bolts)

Erection of 11KV Pin insulator along with Pin.

Erection of 11KV Single Disc insulator set along with necessary fittings

Earthing with G.I pipe 2.5mtr. Long and 40mm dia, including excavation, refilling with alternate layer of salt & Charcoal as per drawing (excluding supply of G.I.Pipe, Salt & Charcoal, Gi wire, nuts &boIts, etc. as required)

Febrication of Cross-Arms by MS Channel/MS Angle as per specification

Laying and Stringing of 1KM (Single Conductor) ACSR 6/1/2.59 mm dia WEASEL including hoisting and binding etc. Complete as required.

Laying & strining of 1KM (Single Conductor)10/8SWG GI wire including hoisting & binding etc. Complete as required

Erection of 9KV,5KA single pole metal oxide gapless type LA , including necessary connection complete as per technical specification

Erection of 11KV DOF unit set of three nos. including necessary connection complete as per technical specification.(Excluding the cost of back clamp, Nuts & Bolts)

Erection of 11KV 200 Amp. GOS unit set of three nos. including necessary connection complete as per technical specification.(Excluding the cost of back cIamp,Nuts & Bolts)

Installation/Positioning of 1J/0.430KV,3-Phase 63KVA of Distribution Transformer on Pole with necessary connections & fitting fixing of all allied accessories components as required for making complete in all respect for energizing

Carriage of 7.5mtrs/ 8.0mtrs length of P.C.C Poles by Mechanical Transport from Site to Workshop Vis-a-vis, including loading, unloading and stacking as requireda) Upto the lead range of 25KMi) For maximum 5 (five) poles From MMD Store to Sub Division Store

Carriage of 7.5mtrs/ 8.0mtrs length of P.C.C Poles by Mechanical Transport from Site to Workshop Vis-a-vis, including loading, unloading and stacking as requireda) Upto the lead range of 25KM ii) Beyond 5 (five) poles From MMD Store to Sub Division Store

Carriage of 9.0mtrs length of P.C.C Poles byMechanical Transport from the Electrical Sub- Divisional Site Store to working site Vis-a-vis,including loading, unloading and stacking asrequireda) Upto the lead range 25KMi) For maximum 4 (four) poles From MMD Store to Sub Division Store

Carriage of 9.0mtrs length of P.C.C Poles byMechanical Transport from the Electrical Sub- Divisional Site Store to working site Vis-a-vis,including loading, unloading and stacking asrequireda) Upto the lead range 25KMii) Beyond 4 (four) poles From MMD Store to Sub Division Store

Carriage of 11/0.430, 3-Phase 63KVA by Mechanical Transport from the Site /Store/Worshop to working site Vis-a-vis including loading, unloading and placing on base, as required, a) Upto the lead range 25KM From MMD Store to Sub Division Store

Erection of 7.5mtr / 8 mtrs length of P.C.C POLE at any kind of soil including excavation of earth refilling the pit with soil upto the ground level ramming and making complete in all respect

Supply of febricated clamps of assorted size of MS flat (50 x 6 mm) with double coat of red oxide primercoating

Supply of 2.5mtr. Long , 40mm dia G.I.Pipe Make: TATA/ JINDAL)

Supply of 60Kg Salt & 55Kg Charcoal ( For 1 Pit).

Positioning of cable drum, removing of cable fromdrum and Laying, hoisting & drawing of AB Cable3X70-95+1x16-25+1x50-95sqmm of 101 KV gradeasper direction of Engineering In-Charge.

Erection & Fitting-Fixing of Insulated suspentionClamp including Pole clamp, Eye hook for cable massenger of 1.1 IV grade on PCC/Steel Pole with the help Pole brackets or Steel Straps &buckIes asper direction of Engineering In-Charge.

Erection & Fitting-Fixing of Insulation Piercing Connectors(IPC) all sizes of 1.1 IV grade including connection from main cable to Distribution box, Tee-Off line asper direction of Engineering In- Charge.

Maintaining adequate clearance from overhead live conductors by Trimming of tree branches for Way Leaves

Erection & Fitting-Fixing of Insulated Dead end enchoring Clamp including Pole clamp, Eye hook for cable massenger of 1.1 KV grade on PCC/Steel Pole with the help Pole brackets or Steel Straps &buckIes asper direction of Engineering In-Charge.

Carriage of materials such as Cable,AAC, AAAC, ACSR, G.I,Wire,Cross-Arm,Stay Set,lnsulators etc., by Mechanical Transport from the Electrical Sub- Divisional Site Store to working site Vis-a-vis, including loading, unloading and stacking as required, upto the lead of 25KM & 50KM.a) Upto the lead range 25KM From MMD Store to Sub Division Store

Civil work for construction of Transformer base and Fencing of Hard drawn steel wire fabric as per requirement and direction of Engg. In Charge

RAKESH DAS (BID ID -193522)

Elite Electricals (BID ID -193624)

MANIK LAL SAHA (BID ID -193652)