Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
Tender Value
₹83.5 L
EMD Value
₹1.7 L
Closing Date
2 Dec 2026, 3:00 pm
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
No
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
60 days
Expenditure
Capital (Works)
Above/Below/Par
PLANNING
15 conditions · 3 needing a document upload
The tenderer must have minimum average annual contractual turnover of V/N or 'V' whichever is less; where V= Advertised value of the tender in crores of Rupees N= Number of years prescribed for completion of work for which bids have been invited. The average annual contractual turnover shall be calculated as an average of "total contractual payments" in the previous three financial years, as per the audited balance sheet. However, in case balance sheet of the previous year is yet to be prepared/ audited, the audited balance sheet of the fourth previous year shall be considered for calculating average annual contractual turnover. The tenderers shall submit requisite information as per Annexure-VIIB, along with copies of Audited Balance Sheets duly certified by the Chartered Accountant/ Certificate from Chartered Accountant duly supported by Audited Balance Sheet.
Tenderer shall have a valid Electrical Contractor's License issued in the name of the firm by any State Government and shall furnish/attach all the particulars of the Electrical license along with their offer.
(a)The Tenderer must have successfully completed or substantially completed any one of the following categories of work(s) during last 07 (seven) years, ending last day of month previous to the one in which tender is invited: (i)Three similar works costing not less than the amount equal to 30% of advertised value of the tender, or (ii)Two similar works costing not less than the amount equal to 40% of advertised value of the tender, or (iii)One similar work costing not less than the amount equal to 60% of advertised value of the tender. (b)(i) In case of tender for composite works (e.g. works involving more than one distinct component, such as Civil Engineering works, S&T works, Electrical works, OHE works etc. and in the case of major bridges - substructure, superstructure etc.), tenderer must have successfully completed or substantially completed any one of the following categories of work(s) during last 07 (seven) years, ending last day of month previous to the one in which tender is invited: (i)Three similar works costing not less than the amount equal to 30% of advertised value of each component of tender, or (iii)Two similar works costing not less than the amount equal to 40% of advertised value of each component of tender, or (iv)One similar work costing not less than the amount equal to 60% of advertised value of each component of tender. Note:- Work experience certificate from private individual shall not be considered. However, in addition to work experience certificate issued by any Govt. Organization, work experience certificate issue by Public listed company having average annual turnover of Rs. 500 crore and above in last 3 financial years excluding the current financial year, listed on National Stock Exchange or Bombay Stock Exchange, incorporated /registered at least 5 years prior to the date of closing of tender, shall also be considered provided the work experience certificate has been issued by a person authorized by the Public listed company to issue such certificates. In case tenderer submits work experience certificate issued by public listed company, the tenderer shall also submit along with work experience certificate, the relevant copy of work order, bill of quantities, bill wise details of payment received duly certified by Chartered Accountant, TDS certificates for all payments received and copy of final/last bill paid by company in support of above work experience certificate.
"Wiring/Rewiring in building with associated electrical works, Or Lighting arrangement in building, circulating area, yard, street etc. with associated electrical works, Or Wiring /rewiring, lighting arrangement in buildings with associated electrical works."
23 conditions · 3 needing a document upload
If firm ( Partnership Firm, Registered Society & Registered Trust) is required to submit Power of attorney it should be submitted as per given proforma enclosed in tender document.
If firm (Company registered under Companies Act 2013) is required to submit a copy of Authorization/Power of Attorney issued by the Company (backed by the resolution of Board of Directors) in favour of the individual to sign the tender on behalf of the company and create liability against the company it should be submitted as per given proforma enclosed in tender document.
If firm LLP (Limited Liability Partnership) is required to submit a copy of Power of Attorney/Authorization issued by the LLP in favour of the individual to sign the tender on behalf of the LLP and create liability against the LLP, it should be submitted as per given proforma enclosed in tender document.
1.0 The tenderer should indicate clearly replies against item included in this check list. 2.0 Furnished the details of credential Along with attested copies of supporting document. 3.0 Quoted the accessories and essential spares. 4.0 Furnished your ITCC (income Tax clearance Certificates. 5.0 Quoted period of completion correctly. 6.0 Kept your offer valid for 60 days. 7.0 Visited the site and have studied the methodology To be adopted for completion of the work. 8.0 Submitted the integration scheme. 9.0 Submitted the BAR CHART /PERT CHART. 10.0 Submitted scheme of completion of work. 11.0 Submitted details of staff working under tenderer. 12. Submit the bid security certificate in appropriate form.
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
Electrical Work in Connection with Provision of Standardized Station Building Including SS Room at 31 Stations in ML-BBK-AYC-KTHE & MKG-ON-CPB section in the Jurisdiction of Sr DEN-V-LKO Over Lucknow Division.
1224-SrDEE-NR-LKO~NR
1224-SrDEE-NR-LKO
Open
Works - General
6 Months
Lucknow, Uttar Pradesh
₹0
₹1.7 L
9 Nov 2026
9 Nov 2026
18 Nov 2026
99 items across 1 schedule
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| — | — | — | 83,50,153.46 | ||
| — | 12000.00 | — | — | ||
| Supply and Recessing/Fixing of PVC Conduit Pipe Conforming to IS. 9537 Part-III.1987 (Latest version) with Accessories Junction box, Bends etc. Including Making Chase, Plastering/Clamping etc. As per Technical Scope of Work. Size-25 mm Dia (Medium). | — | — | — | 4,73,400 | |
| — | 1500.00 | — | — | ||
| Supply & Fixing of PVC Conduit Pipe Conforming to IS 9537 Part-III/1983 (latest version) On Surface with Accessories, Junction Box, Bends etc. Including Fixing, Clamping etc. As per Technical Scope of Work. Size-25 mm Dia (Medium) | — | — | — | 49,350 | |
| — | 1000.00 | — | — | ||
| Supply of Batten/Angle Holder Conforming to IS: 1258-2005 or Ceiling Rose, 3 Plate Conforming to IS: 371-1999 & Installation on the Junction Box of Laid Conduit Including Connections, Testing & Commissioning as per Site Requirement and as per Technical Scope of Work. | — | — | — | 16,810 | |
| — | 15000.00 | — | — | ||
| Supply of Following sizes FRLS PVC Insulated Multi Stranded Copper Conductor Single Core Cable conforming to IS 694 (Latest Version) , and Drawing in Laid (recessed /surface) M.S / PVC Conduit Pipe for Wiring of Point Wiring / Circuit Wiring / Sub Main / Main as required Including Connections, Testing and Commissioning. As per Technical Scope of Work Size-1.0 sq mm. | — | — | — | 1,64,250 | |
| — | 16000.00 | — | — | ||
| Supply of Following sizes FRLS PVC Insulated Multi Stranded Copper Conductor Single Core Cable conforming to IS 694 (Latest Version) and Drawing in Laid (recessed /surface) M.S / PVC Conduit Pipe for Wiring of Point Wiring / Circuit Wiring / Sub Main / Main as required Including Connections, Testing and Commissioning. As per Technical Scope of Work Size-1.5 sq mm. | — | — | — | 2,43,680 | |
| — | 18000.00 | — | — | ||
| Supply of Following sizes FRLS PVC Insulated Multi Stranded Copper Conductor Single Core Cable conforming to IS 694 (Latest Version) and Drawing in Laid (recessed /surface) M.S / PVC Conduit Pipe for Wiring of Point Wiring / Circuit Wiring / Sub Main / Main as required Including Connections, Testing and Commissioning. As per Technical Scope of Work Size-2.5 sq mm. | — | — | — | 4,12,200 | |
| — | 8000.00 | — | — | ||
| Supply of Following sizes FRLS PVC Insulated Multi Stranded Copper Conductor Single Core Cable conforming to IS 694 (Latest Version) and Drawing in Laid (recessed /surface) M.S / PVC Conduit Pipe for Wiring of Point Wiring / Circuit Wiring / Sub Main / Main as required Including Connections, Testing and Commissioning. As per Technical Scope of Work Size-4.0 sq mm. | — | — | — | 2,58,000 | |
| — | 700.00 | — | — | ||
| Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. As per Technical Scope of Work. 5/ 6A switch. | — | — | — | 1,01,276 | |
| — | 90.00 | — | — | ||
| Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. As per Technical Scope of Work. 3 pin 5/6 A socket outlet. | — | — | — | 14,274 | |
| — | 60.00 | — | — | ||
| Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. As per Technical Scope of Work.15/16 A switch. | — | — | — | 10,331.4 | |
| — | 60.00 | — | — | ||
| Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. As per Technical Scope of Work. 6 pin 15/16 A socket outlet. | — | — | — | 15,921.6 | |
| — | 50.00 | — | — | ||
| Supply and erection of modular metal boxes with white finish single mounting plates for fixing switches, plug sockets, fan regulators, and wiring connections. The metal boxes and boards shall be concealed within the wall as per the Technical Scope of Work. Size-( 12 modules) | — | — | — | 21,634.5 | |
| — | 30.00 | — | — | ||
| Supply and erection of modular metal boxes with white finish single mounting plates for fixing switches, plug sockets, fan regulators, and wiring connections. The metal boxes and boards shall be concealed within the wall as per the Technical Scope of Work. Size-( 8 modules) | — | — | — | 10,987.8 | |
| — | 40.00 | — | — | ||
| Supply and erection of modular metal boxes with white finish single mounting plates for fixing switches, plug sockets, fan regulators, and wiring connections. The metal boxes and boards shall be concealed within the wall as per the Technical Scope of Work.Size-( 6 modules) | — | — | — | 11,052.4 | |
| — | 40.00 | — | — | ||
| Supply and erection of modular metal boxes with white finish single mounting plates for fixing switches, plug sockets, fan regulators, and wiring connections. The metal boxes and boards shall be concealed within the wall as per the Technical Scope of Work. Size-( 4 modules). | — | — | — | 7,478.4 | |
| — | 10.00 | — | — | ||
| Supply, install, test & commissioning of 12 Module PVC box with inner & outer plate used for wiring work. As per the Technical Scope of Work. | — | — | — | 2,478.1 | |
| — | 18.00 | — | — | ||
| Supply, install, test & commissioning of 08 Module PVC box with inner & outer plate used for wiring work. As per the Technical Scope of Work. | — | — | — | 3,876.66 | |
| — | 20.00 | — | — | ||
| Supply, install, test & commissioning of 06 Module PVC box with inner & outer plate used for wiring work. As per the Technical Scope of Work | — | — | — | 3,133 | |
| — | 30.00 | — | — | ||
| Supply, install, test & commissioning of 03 Module PVC box with inner & outer plate used for wiring work. As per the Technical Scope of Work. | — | — | — | 3,047.7 | |
| — | 60.00 | — | — | ||
| Supply, Erection, Testing and Commissioning of Mobile Charging Board having 4 no's Sockets 5 Pin 6 Amp on Each Board, one no Indication Lamp on Each Board, Fuse Kit Kat on Each Boards Complete in all Respect as per Specification. As per technical scope of work. | — | — | — | 25,061.4 | |
| — | 500.00 | — | — | ||
| Supply of material & commissioning of PVC casing caping size 25mm x12mm (WXH) with accessories for surface wiring as per the Technical Scope of Work. | — | — | — | 15,275 | |
| — | 400.00 | — | — | ||
| Supply and laying of 25 mm Flexible pipe as per standard specification. As per technical scope of work. | — | — | — | 7,324 | |
| — | 40.00 | — | — | ||
| Supplying and Fixing of CRCA sheet steel, 8 Way SPN, Double Door MCB Distribution Box, 240 V, IP54, on surface/recess, complete with tinned Copper Bus bar, Neutral Bus bar, Earth bar, Din bar, Interconnections, Powder Coated Including Earthing etc. a) DP MCB 25-32 A,10 KA "B/C" curve (incoming)-1 No, b) 25A, DP RCCB = 01 No. having a Sensitivity Current 30 ma c) 6-32A ,10 kA MCB SP "B/C" curve = 04 Nos. (Outgoing). Make of MCB, RCCB & DBs: Schneider Electric, ABB, GE, Siemens, L&T, Legrand, Hager. As per Technical Scope of Work. | — | — | — | 2,59,533.2 | |
| — | 31.00 | — | — | ||
| Supply, Erection, Fixing, Testing and Commissioning of Double Door 4 Way, TPN, Distribution Box, IP 54, along with 1X 125 Amp 3P MCCB 35 kA, 12X 6 -32 Amp 10 kA MCB SP "B/C" curve as per requirement Complete in all respect. Make of MCB/MCCB & DB: Schneider Electric, ABB, GE, Siemens, L&T, Legrand, Hager. As per Technical Scope of Work. | — | — | — | 5,29,376.15 | |
| — | 5.00 | — | — | ||
| Supply, fixing, testing and commissioning of wall mounted/ recessed LT double door 2-way, IP54, distribution board made up of steel sheet, Phosphatized powder painted complete with neutral link, earth paint, din rail and prewired with DP RCBO's 25 (2P, 30 mA) Amp outgoing confirming to IS: 12640-2 & IEC-61009-1 or latest. Make of RCBO & DBs: Schneider Electric, ABB, GE, Siemens, L&T, Legrand, Hager. As per technical scope of work. | — | — | — | 13,477.75 | |
| — | 5.00 | — | — | ||
| Supply, fixing, testing and commissioning of wall mounted/ recessed LT double door 2-way, IP54, distribution board made up of steel sheet, Phosphatized powder painted complete with neutral link, earth paint, din rail and prewired with DP RCBO's 40 (2P, 30 mA) Amp outgoing confirming to IS: 12640-2 & IEC-61009-1 or latest. Make of RCBO & DBs: Schneider Electric, ABB, GE, Siemens, L&T, Legrand, Hager. As per technical scope of work. | — | — | — | 14,748.35 | |
| — | 85.00 | — | — | ||
| Supply, erection, testing and commissioning of 300 mm sweep fresh air fan complete in all respect as per specification and site requirement. including grouting of nut, bolts and fastener and other required materials as per the Technical Scope of Work. | — | — | — | 1,25,083.45 | |
| — | 23.00 | — | — | ||
| Supply, erection, testing and commissioning of wall mounting fan 400 mm sweep with pull cord control for speed & oscillation ON-OFF conforming to IS: 555-1979. including grouting of nut, bolts and fastener and other required materials as per the Technical Scope of Work. | — | — | — | 48,018.48 | |
| — | 85.00 | — | — | ||
| Supply, Installation, Testing and Commissioning of 1200 mm sweep, BEE 5 star rated, ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos. metal blades (aluminum alloy), 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, Power Factor not less than 0.9, Service Value (CM/M/W) minimum 6.00, Air delivery minimum 220 Cum/Min , 350 RPM (tolerance as per IS : 374-2019), THD less than 10%, remote for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise=75 degree C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC Supply, earthing etc. i/c external connections with 1.5 sq.mm FRLS/HFFR, PVC insulated copper conductor single core cable and earthing etc. as required. It shall also include the scope of supply and installation of safety cord of SS as per IS:302 Part 2 Sec-80. Dia & length of such cord shall be as per recommendation of OEM of fan and same shall be approved by railway. The price includes Remote for speed control. Details of BLDC fan should be approved before supply, and mounting work should be done as per site requirement. As per technical scope of work. | — | — | — | 2,95,573.9 | |
| — | 200.00 | — | — | ||
| Supply, Installation, Testing & Commissioning of Complete 1 x (18- 20 Watt), 1200 mm (±2%) length, Retro fitment, T-8 type LED Tube Light Fitting with Inbuilt Driver having Decorative Pin type End Caps and Copper contacts with Diffuser made of Transparent Polycarbonate, Conforming to PCEE/NR Specification No: PCEE/NR /121- Elect/PS/2018(Rev -'3') Dated: - 28/06/18 & PCEE/NR /121- Elect/PS/2019(Rev-'4') Dated 04.11.2019 or Latest. Details of Light Fitting & Fixture Should be Approved Before Supply and Mounting Work should be done as per Site Requirement. As per Technical Scope of Work. | — | — | — | 98,598 | |
| — | 50.00 | — | — | ||
| Supply, Installation, Testing & Commissioning of Glare free recessed mounted LED 2x2 panel Fitting Complete with Driver 36/40 Watts Housing- Metallic CRCA powder coated body, Conforming to PCEE/NR Specification No: PCEE/NR /121- Elect/PS/2018(Rev -'3' ) Dated: 28/06/18 & PCEE/NR /121- Elect/PS/2019(Rev-'4') Dated 04.11.2019 or Latest. Details of Light Fitting & Fixture Should be Approved Before Supply and Mounting Work should be done as per Site Requirement. As per Technical Scope of Work. | — | — | — | 1,02,093.5 | |
| — | 62.00 | — | — | ||
| Earthing with 40 mm Dia GI Pipe Class 'B', 3 Meter Long Earth Electrode a s per IS:3043 (latest version) to Achieve Earth Resistance Less than 5 Ohms Including Construction of Masonry Enclosures with Hinged Cover plate of Cast Iron with Locking Arrangement (Approx. size 400 mmx 400 mm) on Top, Provision of Earth Plate, Connections from Earth Electrode to Switch gear/pole as per drawing & as per Technical Scope of Work | — | — | — | 1,27,889.26 | |
| — | 800.00 | — | — | ||
| Supply, Laying, Connection & Commissioning of 8 SWG GI Wire & Drawing in Laid/on Surface MS/PVC Conduit Pipe, confirming to relevant IS Buried in Ground/Recessing in Floor from Earth Electrode to Earth Terminal of Equipment's. Including Supply of Material. As per Technical Scope of Work. | — | — | — | 11,216 | |
| — | 200.00 | — | — | ||
| Supply, laying, connection & commissioning of G.I. strip 12.5 x 3 mm (Galvanized) confirming to relevant IS, fixing on surface or as per site condition, clamping or fixing with suitable arrangement as per site requirement. As per technical scope of work. | — | — | — | 7,692 | |
| — | 200.00 | — | — | ||
| Supply of HDPE (High Density Poly Ethylene polymers) pipe of Material Grade- PE 63 grade, IS 4984 Resistance to chemicals- Exceptional resistance to all external and internal corrosion. Resistant to electrolytic corrosion.Working pressure in KGF/CM²)Specified base density- 940 to 958 kg/mtr3, Size-HDPE Pipe, Outer diameter 63 mm, wall thick Min. 3.0 mm & Max 3.4 mm. | — | — | — | 27,776 | |
| — | 40.00 | — | — | ||
| Supply, erection, testing and commissioning of End termination of 3-½ C / 4.0 C X35 to 400 sq. mm. LT XLPE cable as per specification. (One set means lugs in R-Y-B-N). Suitable for Cable Size 3-½ C / 4.0 C X35 to 400 sq. mm. As per Technical Scope of work. | — | — | — | 16,380.8 | |
| — | 10.00 | — | — | ||
| Supply, installation, testing and commissioning of heat shrinkable straight through jointing kit and jointing of cable. As per Technical Scope of work. Suitable for Cable Size 35-185 Sq.mm,4 core, (Only LT cable supplied by the Railway), Make: -Raychem, 3M, Densons, Cabseal or other reputed make with prior approval. | — | — | — | 43,814.6 | |
| — | 4000.00 | — | — | ||
| Laying of 1.1 KV grade LT XLPE Insulated Armoured, Aluminium Conductor Cable of Different Sizes as per Cable route Plan Approved by Railways and Meagering of Cable before and after its Laying. As per Technical Scope of work ( Cable will be Supplied by the any Railway store of Lucknow Division) | — | — | — | 41,600 | |
| — | 3000.00 | — | — | ||
| Excavating and Refilling of Trench in Normal Soil to the Level of Ground with Rammed Earth as per Site Incharge and as per Cable Route Plan. so as not to form a Drain. Size of Trench should be 0.3 Mtrs. Wide & 1 Mtr. Deep as per Cable Plan and Instructions of SSE/incharge. It shall confirm to the Safe Distance as per Cable Plan. It also Includes Clearance of Roots of Trees & Bushes. As per Technical Scope of Work. | — | — | — | 2,74,140 | |
| — | 15000.00 | — | — | ||
| Supply and Laying of 2nd Class New Bricks in the Trench and Laying as per Cable Plan and Instructions of SSE/incharge. As per Technical Scope of Work. | — | — | — | 1,45,050 | |
| — | 500.00 | — | — | ||
| Clamping of Cable with Wall / Trusses / Cable Tray / Angle with help of Nut, Bolt & Washer. The Clamp made out of GI strip Size not Less than 32X5 mm). As per Technical Scope of Work. | — | — | — | 16,420 | |
| — | 500.00 | — | — | ||
| Horizontal boring size up to 125 mm Dia & minimum 1.0 Mtr Depth from Ground Level by Horizontal Deep Drilling Machine or Suitable Machine Including Supply and Commissioning of DWC HDPE Pipe as per IS-16205 or latest. Size Outer Dia 120 mm and Inner Dia 103 mm. DWC HDPE Pipe to be Provided at the Starting Bore and at End of the Bore upto Maximum Feasibility for Horizontal Bore Complete in all respect as per Site requirement and as per Technical Scope of Work. | — | — | — | 2,60,585 | |
| — | 20.00 | — | — | ||
| Manufacturing and Supply, Erection and Commissioning of Bus bar type Junction box, 4 pole Alluminium Bus bar 4 Strip, Capacity 200 Amp each Bus bar, Enclosure made of 16 SWG CRCA with Powder Coating, Bus bar not less than 250 mm Length or Suitable for 4 Way Complete as per IS and site requirement Including Civil Foundation work required to Install Junction box. As per Technical Scope of Work. | — | — | — | 97,029 | |
| — | 300.00 | — | — | ||
| Design, manufacture, display, Erection and installation of wall mounted, hanging, ceiling-mounted, pole-mounted, or floor-mounted LED illuminated sign/direction boards in various shapes (Single & double sided horizontal & vertical Elliptical/Parabolic - Full Elliptical/Half Elliptical/Semi Elliptical or other types as per site requirement /Flat Single & double sided wall mounted etc.) as per enclosed specification and as per site requirement (decided by engineer incharge). The display sheet shall be of unbreakable 040 grade translucent polycarbonate sheet of 2 mm to 3 mm thickness. The text / graphics matter visibility angle shall not be less than160 degree. The approved colour text and graphics shall be printed / router-cut on monomeric calendared vinyl of minimum 100-micron thickness and shall be firmly pasted on display sheets. The mounting arrangement shall be hanging, wall mounting, ceiling mounting, pole mounting or floor mounting and as per site requirement. The signage shall have the integral mounting arrangements with sturdy structural frame and ACP cladding on the back side of the signage to avoid rusting, and entry of dust. The LED Board shall have uniform illumination with 6-8 W / sqft and with brightness more than ambient light. Suitable size end cap of 1.5 mm thick SS 304 should be provided. As per technical scope of work. | — | — | — | 8,23,137 | |
| — | 4.00 | — | — | ||
| Design, Manufacture, Supply, Erection, Testing & Commissioning of Front Operated Double door type Weatherproof Feeder Pillar Suitable for IP-65 Degree of Protection with Digital measuring Instrument & Aluminium Bus-bar Arrangement, Conforming to IS/IEC 61439 -1 & 2, Edition 3, 2020 with Latest Amendments or latest. Comprising with the Following MCCB's fixed in it.: (i) Incomer 400 Amp, FP, 35 kA MCCB with Adjustable Thermal & Fixed Magnetic Release & Spreaders-2 No (ii) Bus coupler 400Amp FP, 35 kA, MCCB with Adjustable Thermal & Fixed Magnetic Release & Spreaders-1 No (iii) 400 Amp FP Manual Change over-1 No (iv) Outgoings- 250Amp FP 35 kA MCCB with Adjustable Thermal & Fixed Magnetic Release & Spreaders-2 No (iv)Outgoing- 125Amp FP 35 kA MCCB with Adjustable Thermal & Fixed Magnetic Release & Spreaders-4 No, (v) Outgoing 63 Amp FP 35 kA MCCB with Adjustable Thermal & Fixed Magnetic Release & Spreaders-2 No. Digital measuring instrument, indication lamp on all incoming and outdoor feeder including Civil Foundation work Required to Install Panel As per Drawing Approved by Railways and Technical Scope of Work. Make of MCCBs: - Schneider Electric, ABB, GE, Siemens, L&T, Legrand, Hager conforming to relevant IS/IEC. The LT Panel Manufacturer should be CPRI-Approved. | — | — | — | 19,31,215 | |
| — | 10.00 | — | — | ||
| Design, Manufacture, Supply, Erection, Testing & Commissioning of Front Operated Double door type Weatherproof Feeder Pillar Suitable for IP-65 Degree of Protection with Digital measuring Instrument & Aluminium Bus-bar Arrangement, Conforming to IS/IEC 61439 -1 & 2, Edition 3, 2020 with Latest Amendments or latest. Comprising with the Following MCCB's fixed in it. (i) Incomer 250 Amp, FP, 35 kA MCCB with Adjustable Thermal & Fixed Magnetic Release & Spreaders-1 No (ii) Outgoing- 125 Amp, FP, 35 kA MCCB with Adjustable Thermal & Fixed Magnetic Release & Spreaders-2 No (iii) Outgoing- 63 Amp, FP, 35 kA MCCB with Adjustable Thermal & Fixed Magnetic Release & Spreaders-2 No= 02 No. (outgoing).Digital measuring instrument, indication lamp on all incoming and outdoor feeder including Civil Foundation work Required to Install Panel As per Drawing Approved by Railways and Technical Scope of Work. Make of MCCBs: - Schneider Electric, ABB, GE, Siemens, L&T, Legrand, Hager conforming to relevant IS/IEC. The LT Panel Manufacturer should be CPRI-Approved. | — | — | — | 9,69,077.2 | |
| — | 21.00 | — | — | ||
| Supply, Erection, Connection, Testing and Commissioning of Powder Coated Sheet metal deep drawn distribution board fitted with 20 Amp plug socket 2P + E, 240V AC and 16-20 Amp MCB (1 P + N) complete in all respect as per site requirement. As per Technical Scope of Work. | — | — | — | 38,504.13 | |
| — | 21.00 | — | — | ||
| Supply, Installation, Testing & Commissioning of Electronic Voltage stabilizer suitable for one Air Conditioner unit upto 2 Ton Capacity. The Electronic Voltage Stabilizer having Digital Display, Wall Mounted, Capacity 15 Amp, Input Voltage range :130-300 Volt AC ,50 Hz, Low/High Voltage Cut off 120/300 Volt, Time Delay 4 -6 sec Initial Delay. Make o f Voltage Stabilizer: M/s V- Gaurd Model No VWR 500, M/s Microtek Model No EM5150+. , M/s Livgaurd Model No LS2G 500/LG 500, Voltas Model No VA5130, Blue Star VS513DTA-GT or Equivalent Model of above Mentioned make with Prior Approval. As per Technical Scope of Work. | — | — | — | 1,08,079.02 | |
| — | 21.00 | — | — | ||
| Installation, Testing and Commissioning of Split AC 1.5 Ton/2 Ton Capacity Indoor and Outdoor Unit and Providing Drainage Pipe upto nearest Drainage point. The work Includes Top up of Prescribed Refrigerant r e q u i r e d during Installation. The work also I n c l u d e s Supply and Commissioning of Bracket with Fastener for Outdoor unit Complete with all related Accessories. As per Technical Scope of Work. | — | — | — | 53,203.71 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
GuidelinesonStandardSignages.pdf
ATTACHMENT
GCC-2022.pdf
ATTACHMENT
ACStoGCC1-121.pdf
ATTACHMENT
LatestCEESpec.pdf
ATTACHMENT
Tender_document_1224.pdf
ATTACHMENT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .