Repairing and Renovation of Office of Deputy Director Agriculture (Training) (Repairs for office, Staff Quarters) at Dahod Dist. Dahod

Name of Work :- Repairing and Renovation of Office of Deputy Director

Agriculture (Training) (Repairs for office, Staff Quarters) at Dahod Dist. Dahod

BILL OF QUANTITIES

Memorandum showing item of works to be carried out.

It. Description of Item Qty. Unit Rate in Total

No. Figures Amount

1 Excavation for foundation upto 1.5 m depth including sorting out and 479.00 Cum. 160.40

stacking of useful materials and disposing off the excavated stuff upto

any lead for all sorts of soil.

2 Excavation for foundation upto 1.5 m depth including sorting out and 185.00 Cum. 222.31

stacking of useful materials and disposing off the excavated stuff upto

any lead. (C) Hard murrum.

3 Providing and laying cement concrete 1:3:6 (1 cement : 3 coarse sand 464.00 Cum. 3264.72

: 6 graded B.T. stone aggregate 20mm nominal size) with curing

complete including cost of form work in foundation and plinth.

4 Providing 10mm thick cement plaster in single coat on brick/concrete 1366.00 Sqm. 177.35

walls for interior plastering upto floor two level and finished even and

smooth in cement mortar 1:3 (1 cement : 3 sand)

5 Providing 15mm thick cement plaster in single coat on brick/concrete 4307.00 Sqm. 231.38

walls for interior plastering upto floor two level and finished even and

smooth in cement mortar 1:4 (1 cement : 4 sand) including finishing

with a floating coat of neat cement slurry.

6 Providing 20mm thick sand faced cement plaster with gutka on walls 4901.00 Sqm. 353.72

for all heights above ground level consisting of 12mm thick backing

coat C.M. 1:3 (1 cement : 3 sand) and 8mm thick finishing coat of C.M.

1:1 (1 cement : 1 sand) etc. complete.

7 Providing and laying Vitrified tiles 8 to 10 mm thick, 36'' x 36'' in 669.00 Sqm. 1531.82

flooring treads of steps and landing laid on a bed of 12mm thick

cement mortar 1:3 (1 cement : 3 coarse sand) finishing with flush

pointing in white cement.

8 Providing and laying Vitrified tiles 8 to 10 mm thick, in skirting, risers of 50.00 Sqm. 1592.40

steps and dedo on 10mm thick cement plaster 1:3 (1 cement :

coarse sand) and jointed with white cement slurry.

9 Providing and fixing factory made uPVC glazed / wire mesh windows / 56.00 Sqm. 12625.00

doors comprising of lead free uPVC multi-chambered frame, sash and

mullion/coupler (where ever required) extruded profiles having

minimum wall thickness of 1.70 mm for Series R1 and R2 profiles and

2.10 mm for Series R3 and R4 profiles conforming to EN: 12608 in any

shape, colour and design duly reinforced with galvanized mild steel

section made of required shape & size as per Specification, uPVC

extruded glazing beads, interlocks and inline sash adaptor (wherever

required) of appropriate dimension, EPDM gasket, hardware, SS304

grade fasteners of minimum 8 mm dia with counter sunk

head,comprising of matching polyamide PA6 grade sleeve for fixing

frame to finished wall as per IS 1367 : Part 1 to 14, plastic packers,

plastic caps and necessary stainless steel screws etc. Profile of frame,

sash & mullion (if required) shall be mitred cut and fusion welded /

mechanically jointed duly sealed at all corners, including drilling of

It. Description of Item Qty. Unit Rate in Total

No. Figures Amount

fixing hardware and drainage of water etc. after fixing frame the gap

between frame and adjacent finished wall shall be filled with weather

proof silicon sealant over backer rod of approved size and quality, all

complete as per approved drawing conforming to specification &

direction of Engineer-in-charge. Section of steel reinforcement and

cross sections of uPVC profiles to be as per design approved by

Engineer-in-charge. Wire mesh / glazing of plain/ toughened/

laminated/ double glass unit with / without high performance coatings

as per design requirements and conforming to IS: 3548 & IS:

shall not be paid separately. Three track three panels sliding window

with two glazed & one wire mesh panels with Aluminium channel for

roller track, wool pile, nylon rollers with SS 304 body. Using R3 series

with frame (98 mm & above) x (40 mm & above) & both glazed and fly

screen sash (30 mm & above) x (55 mm & above) with zinc alloy

(zamak) powder coated handle on every glazed panel along with multi-

point locking system. (Height upto 1.8m).

10 Providing and fixing factory made uPVC glazed/wire mesh windows / 79.00 Sqm. 11615.00

doors comprising of lead free uPVC multi-chambered frame, sash and

mullion/coupler (where ever required) extruded profiles having

minimum wall thickness of 1.70 mm for Series R1 and R2 profiles and

2.10 mm for Series R3 and R4 profiles conforming to EN: 12608 in any

shape, colour and design duly reinforced with galvanized mild steel

section made of required shape & size as per specification, uPVC

extruded glazing beads, interlocks and Inline sash adaptor (wherever

required) of appropriate dimension, EPDM gasket, hardware, SS304

grade fasteners of minimum 8 mm dia with counter sunk head,

comprising of matching polyamide PA6 grade sleeve for fixing frame to

finished wall as per IS 1367 : Part 1 to 14, plastic packers, plastic caps

and necessary stainless steel screws etc. Profile of frame, sash &

mullion (if required) shall be mitred cut and fusion welded /

mechanically jointed duly sealed at all corners, including drilling of

fixing hardware and drainage of water etc. after fixing frame the gap

between frame and adjacent finished wall shall be filled with weather

proof silicon sealant over backer rod of approved size and quality, all

complete as per approved drawing conforming to specification &

direction of Engineer-in-charge. Section of steel reinforcement and

cross sections of uPVC profiles to be as per design approved by

Engineer-in-charge. Wire mesh / Glazing of plain/ toughened/

laminated/ double glass unit with / without high performance coatings

as per design requirements and conforming to IS: 3548 & IS:

shall Not be paid separately. Three track three panels sliding door with

Aluminium channel for roller track, wool pile, zinc alloy (zamak) powder

coated handle on two panels along with multi-point locking system,

adjustable nylon rollers with SS 304 body.Using R3 series with frame

(98 mm & above) x (40 mm & above) & sash (30 mm & above) x (74

mm & above). (Height upto 2.5 metre).

It. Description of Item Qty. Unit Rate in Total

No. Figures Amount

11 Providing and fixing factory made uPVC glazed / wire mesh windows / 4.00 Sqm. 13635.00

doors comprising of lead free uPVC multi-chambered frame, sash and

mullion/coupler (where ever required) extruded profiles having

minimum wall thickness of 1.70 mm for Series R1 and R2 profiles and

2.10 mm for Series R3 and R4 profiles conforming to EN: 12608 in any

shape, colour and design duly reinforced with galvanized mild steel

section made of required shape & size as per specification, uPVC

extruded glazing beads, interlocks and inline sash adaptor (wherever

required) of appropriate dimension, EPDM gasket, hardware, SS

grade fasteners of minimum 8 mm dia with counter sunk head,

comprising of matching polyamide PA6 grade sleeve for fixing frame to

finished wall as per IS 1367 : Part 1 to 14, plastic packers, plastic caps

and necessary stainless steel screws etc. Profile of frame, sash &

mullion (if required) shall be mitred cut and fusion welded /

mechanically jointed duly sealed at all corners, including drilling of

holes for fixing hardware and drainage of water etc.

After fixing frame the gap between frame and adjacent finished wall

shall be filled with weather proof silicon sealant over backer rod of

approved size and quality, all complete as per approved drawing

conforming to specification & direction of Engineer-in-charge. Section

of steel reinforcement and cross sections of uPVC profiles to be as per

design approved by Engineer-in-charge. Wire mesh / Glazing of plain/

toughened/ laminated/ double glass unit with / without high

performance coatings as per design requirements and conforming to

IS: 3548 & IS: 16231 shall not be paid separately Ventilator Casement

window single panel with or without fixed panel with S.S. 304 friction

hinges as per size and weight of sash, single point locking zinc alloy

(zamak) powder coated handles. Using R1 series with frame (33 mm &

above) x (35 mm & above) & sash /mullion (33 mm & above) x (50 mm

& above). (Height upto 0.90 metre).

12 Providing and fixing M.S. grills of required pattern to wooden frames of 2736.00 Kg. 110.31

windows etc. with M.S. flats at required spacings and frame alround,

square or round bars with round headed bolts and nuts or by screws

(A) Plain Grill.

13 Providing and laying mirror polished machine polished black Granite 222.60 Sqm. 4872.24

stone slab 15 mm (average) thick for Doors / Windows cill & Jams

cladding as per design including full moulded round front edge in trade

of steps laid on 20 mm thick cement mortar 1:6 (1 cement : 6 coarse

sand) jointed with grey cement slurry including rubbing and polishing

etc. complete. For Doors / Windows cill & Jams cladding.

14 Wall painting (two coats) with plastic emulsion paint of approved brand 4262.00 Sqm. 128.38

and manufacture on undecorated wall surface to give an even shade

including throughly brushing the surface free from mortar droppings

and other foreign matter and sand papered smooth.

15 Finishing wall with weather proof exterior emulsion paint on wall 4863.00 Sqm. 122.14

surface (two coats) of approved brand and manufacture to give an

required shape even shade after thoroughly brushing the surface to

remove all dirt, dust and remains of loose powdered materials etc.

16 Wall painting (two coats) with plastic emulsion paint of approved brand 1411.00 Sqm. 134.63

and manufacture on undecorated ceiling surface to give an even

shade including throughly brushing the surface free from mortar

droppings and other foreign matter and sand papered smooth.

It. Description of Item Qty. Unit Rate in Total

No. Figures Amount

17 Applying two coats of primer of approved brand and manufacture on 10536.00 Sqm. 35.35

new wall interior / exterior surface to give an even shade including

thoroughly brushing the surface free from mortar dropping and other

foreign matter and sand papered smooth.

18 Carrying out plinth treatment to post construction / existing structure by 1118.00 Sqm. 68.59

spraying chemical solution for termite control treatment including

labour and material consistent with I.S.I specification. Using Chlordene

and Chiorpurfiles 20 EC. As per 6131_paret-II concentration weight

one percent is recommended i.e. one litre 20 EC chemical emulsion

with 19 liter give 1% concrentration inclusive of one litre chemical

emulsion application at the rate of 5 Litre chemical / Sqm of surface is

recommended as per I.S.

19 Removing and scraping of old deteriorated plaster of any thickness 5628.00 Sqm. 20.36

from wall / R.C.C member including stacking of serviceable material

and disposal of unserviceable from site of work with all lead and lift.

20 Demolition of brick work and stone masonry including stacking of 4.00 Cum. 576.30

serviceable materials and disposal of unserviceable materials with all

lead and lift. (ii) In Cement Mortar.

21 Dismentaling tiled of stone floors laid in mortar including stacking of 2163.00 Sqm. 50.28

serviceable materials and disposal of unserviceable materials with all

lead and lift..

22 Dismentling doors, windows, ventilators etc. (wood or steel) shutters 226.00 Each 196.66

including chowkhats architraves, holdfasts and other attachment etc.

complete and stacking them within all lead and lift. (i) Not exceeding

23 Providing and fixing rolling shutters of approved make made of 80 mm 30.00 Sqm. 3554.40

wide M.S. laths inter-locked together through their entire length and

jointed together at the ends by end locks mounted on specially

designed pipe shaft with bracket plates, guide channels and

arragements for inside and outside locking with push-pull operation

including the cost of hood cover and spring etc. complete. (A) Shutters

having width below 3.5 M.

24 Providing and fixing in position collapsible steel shutters with vertical 39.00 Sqm. 6221.19

channels 20 x 10 x 2 mm braced with flat iron diagonals 20 x 5 mm

size with top and bottom rails of T rin 40 x 40 x 6 mm with 38mm dia,

steel pulleys complete with bolts, nuts, locking arrangements, stoppers

handles including applying a priming coat of red lead paints with two

coat of oil painting etc. complete.

25 Providing, laying & fixing 6mm thick white glazed tukdi (Average size 1453.00 Sqm. 1064.54

12.50 Sq.cm) of equal size pieces for China Mosaic type water

proofing treatment, applying neat cement slurry with waterproofing

cleaning the surface opening the cracks in V compound including

grooves pattern and filling the cracks with water proofing compound

slurry in a good manner including brick bat bedding as directed to have

proper slope of 75mm to 100mm or which ever is required over a layer

of C.M. 1:3 (1 cement : 3 sand) and filling the joints with C.M 1:3,

including finishing the top surface with 15mm thick waterproof cement

plaster in C.M. 1:3 using chemical water proofing compound as per

manufacturers specification including vata of 100mm x 100mm size on

inside periphery of the parapet in C.M. 1:1 and fixing the glazed tiles

pieces on the plaster including filling the joints with white cement

including drip mould at peripheri, acid wash, cost of labour, curing and

testing for no leakage etc. completed as directed by the Engineer in

charge for all floors.

It. Description of Item Qty. Unit Rate in Total

No. Figures Amount

26 Providing and fixing 90 cm high Stainless steel railing made from 45.00 Rmt. 3495.61

anticorrosive 304 grade S.S. pipe of 50 mm dia (16 gauge) as hand

rail with S S 304 grade baluster of 38 mm dia (16 gauge) as a vertical

support fixed in RCC slab / steps of stair at 1.2m c/c including three

horizontal S.S. pipes of 25 mm dia. (16 gauge) at equal distance fixed

by 18.75 mm dia (16 gauge) S.S. pipe with baluster including

accessories as per detailed drawing as directed etc. complete.

27 Providing and laying machine cut free edges, machine polished granite 40.00 Sqm. 3421.88

stone slab 18 mm thick single piece for stair, steps, landing as per

design including full moulded round front edge and 1cm nosing and

necessary groove on trade of steps laid on 20 mm thick cement mortar

1:6 (1 cement : 6 coarse sand) jointed with grey cement slurry

including rubbing, polishing & finishing etc. complete.

28 Providing and laying Ceramic tiles 6mm thick in flooring treads of steps 122.00 Sqm. 1017.30

and landing laid on a bed of 12mm thick cement mortar 1:3 (1-cement

: 3-coarse sand) finishing with flush pointing in white cement.

29 Providing and laying coloured glazed tiles of the size 300 mm x 200 637.00 Sqm. 1523.67

mm x 8 mm / 300 mm x 450 mm x 8 mm in skirting, risers of steps and

dedo on 10 mm. thick cement plaster 1:3 (1 cement : 3 coarse sand) &

jointed with white cement slurry.

30 Providing, laying and jointing in true line and level I.S.I. mark 110 924.00 Rmt. 933.23

diametre U.P.V.C (Type B) conforming to IS 13592-1992 with one end

plain and other end socketed with rubber ring & fittings conforming to

ISI 14735-1999 of approved make for drainage system pipe line, pipe

shall be jointed with each other with rubber lubricant, pipe shall be

fixed on wall using of PVC clamp of the size 110 mm diametre x

mm length x 145 mm heigh at every 2000 mm center to center or shall

be concealed in walls as directed including necessary fittings such as

bends, shoes etc. including testing of pipes and joints and jointed with

adhesive solvent cement including cost of all materials.

31 Providing, laying and jointing in true line and level I.S.I. mark 25mm 312.00 Rmt. 91.84

dia. U.P.V.C. Pipe (SCH- 40) for cold water including fittings as

approved by Engineer In Charge. Pipe shall be fixed on the wall with

the help of clamp at every two metre C/C or shall be concealed as

directed including necessary fittings etc. including testing of pipe and

joints and fixing the same with adhesive solvent, including cost of all

32 Providing and fixing concealed center point to wall ceiling & floor I.S.I. 180.00 Rmt. 208.80

mark C.P.V.C. (SDR 13.5) PIPE having National Sanitation

Foundation (NSF) seal for potable water of following dia. nominal bore

tube fittings and clamps including making good the wall, ceiling and

floor etc. complete. [B] 20 mm.

33 Providing and fixing PVC SWR Nahni trap IS 14735 for drain with S.S. 96.00 No. 588.26

jali of the following nominal diameter of self cleaning design with C.I.

screwed down or hinged grating including the cost of cutting and

making good the walls. (ii) 75 mm dia.

34 Providing & fixing wash basin with pedestal of standard height with 8.00 No. 5061.11

single hole for pillar tap with C.I or M.S. brackets painted white

including cutting holes and making goods the same include C.P. brass

waste and waste pipes (A) Vitreous china as directed by Engineer in

It. Description of Item Qty. Unit Rate in Total

No. Figures Amount

35 Providing & fixing wash down wall hung type water closet with integral 12.00 No. 14431.89

"P" or "S" trap and PVC flushing cistern with a pair of C.I. or mild steel

brackets, complete with fittings such as lead value siphon, 15 mm.

nominal size brass ball valve with polythene float, C.P. brass handle

unions and couplings for connections with inlet, outlet and over flow

pipes, 40 mm. dia. flush bend including cutting holes in walls and

making good the same connecting the flush bend with cistern and

closet etc. complete including plastic sheet cover including jointing trap

with pipe in C.M. 1:1 (a) Vitreous china in white or color.

36 Providing & fixing wash basin with single hole for pillar tap with C.I. or 16.00 No. 1850.32

M.S. brackets painted white including cutting holes and making good

the same but excluding fittings. (A) Vitreous china (ii) Flat back

washbasin 550 mm x 400mm size including C.P. brass waste for

washbasin or sink

37 Providing and fixing flat back corner white earthenware Urinal of size 6.00 No. 1298.67

430 mm x 260mm x 350mm (approved quality) including connecting

the urinal with waste pipe, trap etc. complete and fixing 15mm brass

stop tap including cost of all materials & labour charges etc. complete.

38 Providing and fixing to wall, ceiling and floor galvanised mild steel 60.00 Rmt. 608.35

tubes (medium grade) of the following nominal bore, tube, fittings and

clamps included making good the wall, ceiling and floor (D) 40 mm dia.

39 Providing and fixing to wall, ceiling and floor galvanised mild steel 105.00 Rmt. 794.18

tubes (medium grade) of the following nominal bore, tube, fittings and

clamps included making good the wall, ceiling and floor (E) 50 mm dia.

40 Providing & fixing gun metal check or non return full way wheel valve 10.00 No. 420.63

etc. complete. (C) 25mm dia.

41 Providing & fixing gun metal check or non return full way wheel valve 10.00 No. 663.43

etc. complete. (E) 40mm dia.

42 Providing and fixing brass screw down stop tap. (A) 15mm dia. as 49.00 No. 205.83

directed by Engineer in charge.

43 Providing and fixing pillar tap, capstan head, screw down high 16.00 No. 308.73

pressure with screws, shanks and back nuts. (A) 15mm dia. as

directed by Engineer in charge.

44 Providing and fixing PVC pipe to wall ceiling and floor 10.0 Kg.F/Cm2 325.00 Rmt. 339.05

working pressure with required all material and labour etc. complte. (F)

45 Providing and fixing Steel jali on Nahni trap etc.complete. 15.00 No. 151.50

46 Constructing brick masonry chamber for underground C.I. Inspection 25.00 No. 2932.93

chamber and bends with bricks having crushing strength not less than

35 Kg/Cm2 in C.M. 1:5 C.I. cover with frame (light duty) 455mm x

610mm internal dimensions total weight of cover with frame to be not

less than 38Kg. (Wt. of cover 23 Kg.) and Wt. of frame 15Kg.) (R.C.C.

top slab with 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone

aggregate 20mm size) foundation concrete 1:5:10 inside plaster 15mm

thick with cement mortar 1:3 finished smooth with a floating coat of

neat cement on walls and bed concrete etc. complete. (i) Inside

dimensions 455mm x 610mm and 450mm deep for single pipe line.

It. Description of Item Qty. Unit Rate in Total

No. Figures Amount

47 Providing and fixing PVC laminate Gypsum tiles (595 x 595 x 7.5 mm) 355.00 Sqm. 1111.00

in false ceiling with necessary alluminum and ms framing etc.

48 Providing erecting and fixing double coated ISI water tank of required 24000.00 Litre 3.95

capacity each with all necessary fittings and connection etc. complete

49 Dismentaling existing China Mosaic with brick bat layer of laid in 1453.00 Sqm. 151.50

mortar including stacking of serviceable materials and disposal of

unserviceable materials with all lead and lift.

50 Providing and laying Vitrified tiles 8 to 10 mm thick, 24'' x 24'' in 604.00 Sqm. 1120.36

flooring treads of steps and landing laid on a bed of 12mm thick

cement mortar 1:3 (1 cement : 3 coarse sand) finishing with flush

pointing in white cement.

51 Providing and laying Vitrified tiles 8 to 10 mm thick, 24'' x 24'' in 82.00 Sqm. 1195.02

skirting, risers of steps and dedo on 10mm thick cement plaster 1:3 (1

cement : 3 coarse sand) and jointed with white cement slurry.

52 Providing and fixing window having extruded aluminum Colour 77.00 Sqm. 1583.95

anodized section frame main outer size 95mm x 24mm x 1.17mm @

wt.of 0.738 Kg/mt, horizontal Three track member size 92mm x

31.75mm x 1.30mm,@ Wt.1.07 Kg/mt, vertical member of size 92mm x

31.75mm x 1.50mm @ Wt. 1.06 Kg/mt with sliding shutters of

horizontal member size 40 mmx18mm x 1.29mm @ wt.of 0.456 Kg/mt,

vertical member of size 40mm x 18mm x 1.29 mm @ wt.of

Kg/mt/ with 5 mm thick transparent bronze colour tinted float glass with

powder coated aluminum fittings and fixtures and transparent silicon

sealant glass fixing to frame as per details etc. complete.

53 Providing and fixing 35 mm thick shutters for Doors, windows and 114.00 Sqm. 5338.30

clerestory windows including Indian teak wood frames 10 cm x 7 cm.

size including anodized alluminium fixtures and fastenings including

primer coat of approved quality and two coats of oil painting etc.

complete. (ii) Fully Panelled.

54 Providing and fixing standard extruded of alluminium section of size 4.00 Sqm. 1175.56

63mm x 38.10mm x 1.2mm @ Wt. 0.643 Kg/mt with colour anodized

alluminium frame for ventilation with 5 mm thick frosted glass as

details etc. complete for Ventilation

55 Constructing Sandwitch Platform of 18 mm thick Polished Black 47.00 Sqm. 4557.12

Granite at top and 25 mm thick Kota stone slab using cement mortar

1:3 for sandwich and fitting at bottom & edges with waterproof rigid

adhesives including making necessary grooves in walls with vertical

kotastone 30 mm x 2 No. sandwitch thick every 60 cm centre to centre

including all labour material of approved quality including full moulded

round front edge fixed in wall for partition and jointed with grey cement

slurry including rubbing and polishing etc. complete.

56 Providing and fixing Kitchen platform cup board of frame size 7cm x 36.00 Sqm. 14538.95

5cm teak wood with 19mm thick plywood shutter with both side

laminated sheet front side decorative and back side white laminated

sheet with providing in ventilation stainless jali including oil painting on

frame including necessary 25mm thick kota stone one side rounding

fixing as shelves and necessary brass fixtures and fastening etc.

It. Description of Item Qty. Unit Rate in Total

No. Figures Amount

57 Provision and fixing water closet squatting orissa type W.C. pan size 8.00 No. 1518.03

580mm integral footrest and 100 mm P or S trap and including 25 mm

dia. C.P. brass flush valve and G.I. inlet connection etc. complete. (A)

Vitreous china long pattern white or color as directed by Engineer in

58 Providing and laying cement concrete 1:1.5:3 (1 cement : 1.5 coarse 36.00 Cum. 4583.38

sand : 3 stone aggregate of 20mm nominal size) including finishing

smooth with curing complete including the cost of form work but

excluding the cost of reinforced concrete work in foundation, footing

and mass concrete.

59 Providing and laying cement concrete 1:1.5:3 (1 cement :1.5 coarse 54.83 Cum. 7879.03

sand : 3 stone aggregate of 20mm nominal size) including finishing

smooth with curing complete including the cost of form work but

excluding the cost of reinforcement for R.C.C. work in COLUMN for

any cross sectional area of column upto floor two level.

60 Providing and laying cement concrete 1:1.5:3 (1 cement :1.5 coarse 39.00 Cum. 5664.08

sand : 3 stone aggregate of 20mm nominal size) including finishing

smooth with curing complete including the cost of form work but

excluding the cost of reinforcement concrete work for PLINTH BEAM

for any cross sectional area of beam.

61 Providing and laying brick work using common burnt clay building 109.00 Cum. 4032.12

conventional type bricks having crushing strength not less than

Kg./Sq.cm. in foundation and plinth in cement mortar 1:6 (1 cement :

fine sand) including the cost of all materials and labour charges etc.

62 Providing and laying brick work using common burnt clay building 235.00 Cum. 4141.66

conventional type bricks having crushing strength not less than

Kg/sq.cm. in super structure above plinth level upto floor two level in

cement mortar 1:6 (1 cement : 6 fine sand) including the cost of all

materials and labour charges etc. complete.

63 Providing and laying cement concrete 1:1.5:3 (1 cement :1.5 coarse 48.00 Cum. 4733.87

sand : 3 stone aggregate of 20mm nominal size) including finising

smooth with curing complete including the cost of form work but

excluding the cost of reinforcement for R.C.C work in COPING.

64 Providing ISI mark T.M.T. Fe-500D bar reinforcement for RCC work 37191.00 Kg. 77.25

including bending and placing in position complete up to all floor level.

65 Providing and fixing 0.60 mt. high fencing with 0.75 mt. long M.S. 417.00 Rmt. 1340.27

angle posts 40mm x 40mm x 6mm and oil painting 3 coats fixed at

2.50 mt. c/c with horizontal stainless steel barbed wire weighting

kg. per 100 mt. and razor tape concertina coil strained and fixed to

posts with G.I. staples including fixing etc. complete.

66 Steel work, welded in built up sections framed work including cutting, 3088.00 Kg. 91.08

hoisting, fixing in position and applying a priming coat of red lead paint.

(A) In beams and joists, channels angles tees, flats, with connecting

plates or angle cleats as in main and cross beams. Hip and jack

rafters, purlins connected to common rafters and the like.

67 Box cutting the road surface to proper slope and camber for making a 660.00 Cum. 112.02

base for road work including removing the excavated stuff and

depositing on the road side slope as directed upto 50 mt. lead.

It. Description of Item Qty. Unit Rate in Total

No. Figures Amount

68 Providing and laying controlled cement concrete M-200 and curing 330.00 Cum. 4078.38

complete including the cost of formwork and reinforcement for

reinforced concrete work in Foundations, footings, base of columns

and mass concrete.

69 Compaction and finishing of cement concrete road by trimix process, 1750.00 Sqm. 90.90

providing extra labour charge for trimix (Vaccum dewatering service)

process on cement concrete road surface by using vaccum dewatering

pump floater surface vibrator including making groove 5mm width and

filling with polyvynile polymer and rough finish to surface as per

instruction including leveling etc. complete.

70 Providing and fixing precast Rubber dye / steel dye inter locking 660.00 Sqm. 702.02

concrete block 60mm thick with grade of concrete M-300 pneumatic

compressed / vibrated mechanically and as per approved design

confirming to IS 15658 : 2006 including 35 mm sand layer for levelling

and filling the joint with sand in proper line and level as per guidelines

of IRC : SP 63-2018 etc. complete.

71 Providing and fixing precast concrete kerb stone of grey cement based 450.00 Rmt. 412.13

concrete block 30 cm length, 30 cm height and 15 cm thick of M-200

grade concrete as per approved design and including excavation for

fixing in proper line and level, filling the joints with C.M. 1:3 (1 cement :

3 fine sand) etc. complete.

72 Providing and laying in foundation cement concrete 1:4:8 (1 cement : 4 9.00 Cum. 2653.42

coarse sand : 8 graded stone aggregate 40mm. nominal size) and

curing complete excluding cost of form work in foundation and plinth.

73 Providing and laying ordinary cement concrete 1:2:4 (1 cement : 2 4.00 Cum. 3638.79

coarse sand : 4 graded stone aggregate 20mm. nominal size) and

curing complete including the cost of form work but the cost of

reinforcement (a) footing.

74 Providing and laying controlled cement concrete M-200 and curing 16.00 Cum. 6527.93

complete including the cost of formwork but excluding the cost of

reinforcement for R.C.C. work in Slabs having any thickness.

75 Providing and fixing C.I. Manhole cover 0.60 M. x 0.45M. size having 5.00 No. 958.17

weight not less than 35 Kg.

76 Providing 15mm thick cement plaster in single coat on brick / concrete 124.00 Sqm. 215.65

wall for interior plastering upto floor to level and finishing even smooth

in cement mortar 1:4 (1 cement : 4 sand) and mixing water proofing

materials in cement mortar proportion recommended by the

manufacturers for ground floor.

77 Providing, laying and jointing in true line and level I.S.I. mark 160 20.00 Rmt. 834.38

diametre U.P.V.C (Type B) conforming to IS 13592-1992 with one end

plain and other end socketed with rubber ring & fittings conforming to

ISI 14735-1999 of approved make for drainage system pipe line, pipe

shall be jointed with each other with rubber lubricant, pipe shall be

fixed on wall using of PVC clamp of the size 160 mm diametre x

mm length x 196 mm high at every 2000 mm center to center or shall

be concealed in walls as directed including necessary fittings such as

bends, shoes etc. including testing of pipes and joints and jointed with

adhesive solvent cement including cost of all materials.

It. Description of Item Qty. Unit Rate in Total

No. Figures Amount

78 Provinding and laying cement concrete 1:1.5:3 (1 cement :1.5 coarse 1.35 Cum. 7687.11

sand : 3 stone aggregate of 20mm nominal size) including finishing

smooth with curing complete including the cost of form work but

excluding cost of reinforcement concrete for RCC Slab for all floor.

79 Provinding & laying cement concrete 1:1.5:3 (1 cement :1.5 coarse 3.60 Cum. 4732.86

sand : 3 stone aggregate of 20mm nominal size) including smooth with

curing etc. complete including cost of form work but excluding cost of

reinforcement for R.C.C. work in COPING.

80 Provinding and laying cement concrete work 1:1.5:3 (1 Cement : 1.5 0.27 Cum. 6734.68

coarse sand : 3 graded stone aggregates 20 mm nominal size) for

reinforced concrete chhajja not exceeding 10cm thickness up to floor

two level including finishing the exposed surface with cement mortar

1:3 (1 cement : 3 fine sand) to give a smooth surface, centering and

formwork and curing complete excluding cost of reinforcement for RCC

CHHAJJA for all floors.

81 Providing and laying 24" x 24" vitrified tiles flooring of 10mm thick laid 9.00 Sqm. 1120.36

over 20mm (average) thick base of cement mortar 1:6 (1 cement :

coarse sand) on existing surface flooring by adhesive materials and

jointed with colour cement slurry including finished with flush pointing &

cleaning the surface etc. complete for ANTI SKID.

82 Providing and fixing window having extruded aluminum colour 4.50 Sqm. 1713.70

anodized section frame main outer size 63.50 x 38.10 x 1.95 mm, @

Wt 1.094 Kg / Rmt, horizontal two track member size 61.85 mm x

31.75 mm x 1.20mm @ wt.of 0.695 Kg/mt, vertical member of size

61.85 mm x 31.75mm x 1.30 mm @ wt.of 0.659 Kg/mt with sliding

shutters of horizontal member size 40mm x 18mm x 1.29mm @ wt. of

0.456 Kg/mt, vertical member of size 40mm x 18mm x 1.29mm @ wt.

of 0.456 Kg/mt, @ Wt. 0.457 Kg/mt with 5 mm thick transparent bronze

colour tinted float glass with powder coated aluminum fittings and

fixtures and transparent silicon sealant glass fixing to frame as per

details etc. complete for window.

83 Replace old & us Point by Providing Point wiring for Light/ Bell with 2- 252.00 Pt. 449.45

1.5 sq.mm & earth wire of 1.5 sq.mm (Green) both are of ISI marked

1.1 KV grade FRLS PVC insulated multi strand copper wires up to

mtr length, in below type of pipe erected with 6A Modular type switch /

bell push & accessories and earth continuity of following type, erected

on PVC / Metallic / Wooden box, single mounting base frame covered

with textured/ metallic/ white front plate modules erected on / in wall/

ceiling as per pipe erected, with necessary Lamp holder/ceiling rose /

H.D. Connector as directed (a) with medium class Rigid PVC pipe and

accessories erected flushed on wall / ceiling complete Cat.III

[Accessories:-Havells (Crabtree), MK, Schneider Electric, C&S, Achor

(Roma); Wire:- Finolex, Havells, RR Cable, Polycab, KEI; Pipe:-

Precision, Nihir, Anchor, Polycab, Vraj]

It. Description of Item Qty. Unit Rate in Total

No. Figures Amount

84 Replace Old & us Point by Providing Point wiring for FAN with 2-1.5 100.00 Pt. 638.32

sq.mm & earth wire of 1.5 sq.mm (Green) both are of ISI marked

KV Grade FRLS PVC insulated multi strand copper wires up to 10 mtr

length, in below type of pipe erected with 6A Modular type switch and

hum free EME step type electronic fan regulator mounted and

accessories with earth continuity of following type erected on PVC /

Metallic / Wooden box, single mounting base frame covered with

textured / metallic / white front plate modules erected on / in wall /

ceiling as per pipe erected. with necessary ceiling rose / H.D.

Connector as directed. (a) with medium class Rigid PVC pipe and

accessories erected flushed on wall/ceiling complete Cat.III

[Accessories :- Havells (Crabtree), MK, Schneider Electric, C&S, Achor

(Roma), Wire:- Finolex, Havells, RR Cable, Polycab, KEI; Pipe:-

Precision, Nihir, Anchor, Polycab, Vraj]

85 Replace Old &b us Point by Point wiring for Individual Plug with & 17.00 Pt. 711.04

earth wire of 1.5 sq.mm (Green) both are of ISI marked 1.1 KV grade

FRLS PVC insulated multi strand copper wires up to 10 mtr length, in

below type of pipe erected complete with Modular type switch & 5 pin

Plug erected on PVC/ Metallic / Wooden box covered with appropriate

front plate modules erected on/ in wall/ ceiling as per pipe erected with

following type of accessories. [II] For 16A Plug with 2-2.5 sq.mm Cu.

Wire. (a) with medium class Rigid PVC pipe and accessories erected

flushed on wall/ceiling complete. Cat-III [Accessories:-Havells

(Crabtree), MK, Schneider Electric, C&S, Achor (Roma); Wire:-

Finolex, Havells, RR Cable, Polycab, KEI; Pipe:- Precision, Nihir,

Anchor, Polycab, Vraj]

86 Replace Old &b us Point by Point wiring for Individual Plug with & 55.00 Pt. 475.71

earth wire of 1.5 sq.mm (Green) both are of ISI marked 1.1 KV grade

FRLS PVC insulated multi strand copper wires up to 10 mtr length, in

below type of pipe erected complete with Modular type switch & 5 pin

Plug erected on PVC/ Metallic / Wooden box covered with appropriate

front plate modules erected on/ in wall/ ceiling as per pipe erected with

following type of accessories. [I] For 6A Plug and 6 a switch with 2-1.5

sq.mm Cu. Wire from nearby switch board / mcb db board, (a) with

medium class Rigid PVC pipe and accessories erected flushed on

wall/ceiling complete, Cat-III [Accessories:-Havells (Crabtree), MK,

Schneider Electric, C&S, Achor (Roma); Wire:- Finolex, Havells, RR

Cable, Polycab, KEI; Pipe:- Precision, Nihir, Anchor, Polycab, Vraj]

87 Replace old & us Wiring by Point wiring for Looped Plug with 6A 138.00 Pt. 257.55

Modular type switch & 5 pin socket erected on PVC / Metallic box,

single mounting base frame covered with textured / metallic front plate

modules erected on / in wall / ceiling with following type accessories.

Cat-III [Accessories:-Havells (Crabtree), MK, Schneider Electric,C&S,

88 Replace old & us by Providing following type of Modular Type 25.00 Nos. 160.59

Accessories mounted with pvc / metallic box, single mounting base

frame covered with textured / metallic front plate, modules erected

with necessary connection. As desired by Engineer In charge

computer RJ 45 Socket Cat-III [Accessories:-Havells (Crabtree), MK,

Schneider Electric, C&S, Achor (Roma)]

It. Description of Item Qty. Unit Rate in Total

No. Figures Amount

89 Providing following type of Modular Type Accessories mounted with 31.00 Nos. 199.98

PVC / metallic / Wooden box, single mounting base frame covered

with textured / metallic / white front plate, modules erected with

necessary connections as per site situation directed by Engineer In

charge. (10) 6/16Amp. Universal socket, Cat-III [Accessories :- Havells

(Crabtree), MK, Schneider Electric, C&S, Achor (Roma)]

90 Providing following type of Modular Type Accessories mounted with 31.00 Nos. 310.07

PVC / metallic / Wooden box, single mounting base frame covered

with textured / metallic / white front plate, modules erected with

necessary connections as per site situation directed by Engineer In

charge. (13) 6A/10A/16A/20A/25A/32A Single pole Modular MCB

Switch, Cat-III [Accessories :- Havells (Crabtree), MK, Schneider

Electric, C&S, Achor (Roma)]

91 Replace old & us by Providing and erecting ISI mark Medium class 460.00 Mtr. 33.33

RIGID PVC PIPES of following size complete to be erected on/in wall

or ceiling erected with necessary PVC fittings & Junction boxes fixed

with adhesive solution & clamps with following dia of pipes, in

approved manner as directed (b) 25mm [Pipe:- Precision, Nihir,

Anchor, Polycab, Vraj]

92 Replace old & us Wire Providing and erecting Mains with 1.1 KV grade 1630.00 Mtr. 82.82

FRLS PVC insulated ISI marked stranded Copper conductor wire in

following type of pipe to be erected concealed in /flushed on

wall/ceiling, with 1.5 sq. mm copper conductor FRLS PVC insulated

stranded wire of green colour for earth continuity of following size (A)

With medium class Rigid PVC pipe and accessories (b) 2 wire 2.5 sq.

mm [Wire:- Finolex, Havells, RR Cable, Polycab, KEI; Pipe:-

Precision, Nihir, Anchor, Polycab, Vraj]

93 Replace old & us WIre by providing and erecting Mains with 1.1 KV 130.00 Mtr. 260.58

grade FRLS PVC insulated ISI marked stranded Copper conductor

wire in following type of pipe to be erected in / on wall / ceiling with

sq. mm copper conductor FRLS PVC insulated stranded wire of green

colour for earth continuity of following size (A) with medium class Rigid

PVC pipe and accessories (h) 4 wire 6 sq. mm [Wire:- Finolex, Havells,

RR Cable, Polycab, KEI; Pipe:- Precision, Nihir, Anchor, Polycab, Vraj]

94 Replace old & us WIre by providing and erecting Mains with 1.1 KV 265.00 Mtr. 147.46

grade FRLS PVC insulated ISI marked stranded Copper conductor

wire in following type of pipe to be erected in / on wall / ceiling with

sq. mm copper conductor FRLS PVC insulated stranded wire of green

colour for earth continuity of following size (A) with medium class Rigid

PVC pipe and accessories (b) 2 wire 6 sq. mm [Wire:- Finolex,

Havells, RR Cable, Polycab, KEI; Pipe:- Precision, Nihir, Anchor,

95 Replace old & us Cable by Supplying & erecting approved make LAN 570.00 Mtr. 47.47

cable of following size in existing pipe as per direction [C] CAT -

[Make:- D-link, Havells, RR Cable, KEI, Finolex]

96 Replace Old & us Board by Providing & erecting Switch board for 25.00 Nos. 1133.22

Computer or electric apparatus consisting of following modular type

accessories mounted with PVC / Metallic concealed/ open box with

single mounting base frame covered with textured / metallic/ white

front plate,modules erected with necessary connections as directed

no. 6A/16A universal plug-switch combined.3 nos. 6A Switch 3 nos. 6A

5 pin Plug For Modular Type Accessories, Cat-III [Accessories:-Havells

(Crabtree), MK, Schneider Electric,C&S, Achor (Roma)]

It. Description of Item Qty. Unit Rate in Total

No. Figures Amount

97 Decorative call bell Ting-tong box type 250 volts complete erected 13.00 Nos. 71.71

98 Replace Old & us Fan by Providing and erecting Approved make 100.00 Nos. 1596.81

Ceiling fan with double ball bearing ISI mark with condenser A.C.

23OV.50 c/s.1200 mm. sweep complete, canopy erected on existing

hook or clamp with earthing. [Make:- Crompton, Bajaj, Usha, Havells,

99 Replace old & us by Supplying and erecting 19 / 20 mm. nominal bore 100.00 Mtr. 108.07

Medium Class M.S. Pipe down rod erected duly painted for fan

complete with proper insulation without leakage and earthing.

100 Replace old & us by Supplying & erecting single phase approved make 5.00 Nos. 2054.34

industrial exhaust fan suitable for medium duty ring mounted low noise

operation suitable for medium duty having following dia size and

maximum speed in RPM [A] 305 mm dia 900 RPM Cat II [Make:-

Crompton, Bajaj, Usha, Havells, Orient]

101 Replace old & us by Supplying and erecting led lamps with following 70.00 Nos. 188.87

wattage capacity of 220 to 240 voltage, minimum 15000 burning hours

life, 500 V in built-surge protection,Polycarbonate diffuser, mounting

suitable for E14 / E27 / B22 lamp holders, pf >= 0.5 (A) LED Lamps

integral type, with PC diffuser suitable LAMP holder (iii) 10 to 15 watts

Cat III [Make:- Phillips, Crompton, Havells, Wipro, Jaquar, Bajaj]

102 Replace old & us Fittings by Supplying and erecting LED indoor fittings 135.00 Nos. 535.30

with LEDs of wattage 0.2 Watt to 0.5 Watt assembled on single

MCPCB, with housing used as a heat sink shall be made of thick sheet

Steel conforming to IS: 513/CRCA/ aluminium die cast powder coated

and high U.V. & corrosion resistance with diffuser with company

mark/name 160V to 270V, Power Factor more than 0.95, THD < 15%,

CCT 3000 K to 6500K, Luminaire efficacy> 85 lumens/watt, LED LED

driver efficiency > 85% (fitting required LM-79 & LM-80 Certificates)

(NOTE: Below description have shown ranges of Wattage capacity of

LED fittings. The Engineer incharge may select any wattage capacity

between the ranges shown) (A) Tube Light with integral driver (v) 36-

40 Watts, Surge-2 KV, IP-20, conventional 4 feet Cat III [Make:-

Phillips, Crompton, Havells, Wipro, Jaquar, Bajaj]

103 Replace old and u/s by Supplying and erecting LED indoor fittings with 13.00 Nos. 1794.77

LEDs of wattage 0.2 Watt to 0.5 Watt assembled on single MCPCB,

with housing used as a heat sink shall be made of thick sheet Steel

conforming to IS: 513/ CRCA/ aluminium pressure die cast powder

coated and high U.V. & corrosion resistance with diffuser housed in

aluminium casted body with company mark/ name 160V to 270V,

Power Factor more than 0.95, THD < 15%, CCT3000 K to 6500K,

Luminaire efficacy> 85 lumens/ watt, LED driver efficiency > 85%

(fitting required LM-79 & LM-80 Certificates) (NOTE: Below description

have shown ranges of Wattage capacity of LED fittings. The Engineer

incharge may select any wattage capacity between the ranges shown)

(B) LED Panel Light with provision for Plane front frame with

translucent cover fixed to housing complete. IP20, (vi) 36 watts, 24" x

24", Surge- 2KV, Cat-III [Make:- Phillips, Crompton, Havells, Wipro,

It. Description of Item Qty. Unit Rate in Total

No. Figures Amount

104 Replace old and u/s by Supplying and erecting LED street light fittings 33.00 Nos. 4997.48

with High power White LEDs wattage of 3 Watt and above assembled

on single MCPCB, efficiency more than 130 lm/w and corrosion free

High pressure die cast aluminum housing with smooth finish powder

coated and heat sink extruded aluminium with diffuser and

Polycarbonate optics/ lenses, with toughened glass with company

mark/name engraved or embossed 160 to 270 V,Power Factor more

than 0.95, THD < 10 %, CCT 3000 K to 5700K,Uniformity ratio >0.45,

Luminaire efficacy> 100 lumens/watt . LED driver efficiency > 85 %.

(fittings required LM-79 & LM-80 certificates) (NOTE: Below

description have shown ranges of Wattage capacity of LED fittings.

The Engineer incharge may select any wattage capacity between the

ranges shown.) (A) Street Light (IP-65), Surge protection -4KV integral

and ,Light must have 440VAC line supply with over-voltage protection.

(ii) above 48 to 60 Watts [Make:- Phillips, Crompton, Havells, Wipro,

105 Supplying and erecting LED Flood light fittings with High power White 8.00 Nos. 9647.52

LEDs wattage of 3 Watt and above assembled on single MCPCB,

efficiency more than 130 lm/w and corrosion free High pressure die

cast aluminum housing with smooth finish powder coated and heat

sink extruded aluminium with diffuser and Polycarbonate optics/

lenses, with toughened glass with company mark/name engraved or

embossed 160 to 270 V,Power Factor more than 0.95, THD < 10%,

CCT 3000 K to 5700K, Uniformity ratio >0.45, Luminaire efficacy>

lumens/watt. LED driver efficiency > 85 %. (fittings required LM-79 &

LM-80 certificates) (NOTE: Below description have shown ranges of

Wattage capacity of LED fittings. The Engineer incharge may select

any wattage capacity between the ranges shown) (B) Flood Light (IP-

65), Surge protection -4KV integral and Light must have 440VAC line

supply with over-voltage protection. (vi) above 160 to 200 watts [Make:-

Phillips, Crompton, Havells, Wipro, Jaquar, Bajaj]

106 Replace old & us by providing and erecting Miniature circuit breaker 41.00 Nos 270.68

single pole 0.5A to 2A system and having breaking capacity 10 KA to

be erected in existing box. confirming to IS 8828/1996 with ISI Mark,

Cat-III. [Make:- L&T, Hager, Havells, C&S, Siemens, Legrand]

107 Replaceing Old & us MCB by providing and erecting Miniature circuit 126.00 Nos. 112.11

breaker single pole 6A to 25A suitable to operate on 240 V A.C.

system and having breaking capacity 10 KA to be erected in existing

box. confirming to IS 8828/ 1996 with ISI Mark Cat III [Make:- L&T,

Hager, Havells, C&S, Siemens, Legrand]

108 Replace old and u/s by Providing & erecting 240 V MCB double pole 11.00 Nos 299.97

switch for motor & inductive load (C Curve) having 10 KA breaking

capacity & confirms to IS : 8828 in existing box having following

capacity, (A) 6 to 32 Amp. Cat-III [Make:- L&T, Hager, Havells, C&S,

Siemens, Legrand]

109 Replace old & us by Providing & erecting 415 V MCB Four Pole for 9.00 Nos. 668.62

Motor & Inductive Load (C Curve) having 10KA breaking capacity &

confirms to IS :8828 in existing box having following capacity 40A

Capacity Cat III [Make:- L&T, Hager, Havells, C&S, Siemens, Legrand]

It. Description of Item Qty. Unit Rate in Total

No. Figures Amount

110 Replace old & us by Providing & erecting 415 V MCB Four Pole for 6.00 nos. 595.90

Motor & Inductive Load (C Curve) having 10KA breaking capacity &

confirms to IS :8828 in existing box having following capacity (a) 6 to

32 Amp. Cat-III [Make:- L&T, Hager, Havells, C&S, Siemens, Legrand]

111 Sheets steel powder coated enclosure suitable for incorporating 11.00 Nos. 176.75

One/Two nos. MCB. [Make:- L&T, Hager, Havells, C&S, Siemens,

112 Replace old & us DB by Providing and erecting Sheet Steel powder 5.00 Nos. 2339.16

coated MCB distribution board - flush/ surface mounted fitted with

busbar, neutral link, earth bar and DIN rail, Conforms to IS 8623-1 &

IEC 61439-1 & 3 without MCB to house appropriate nos. of MCBs.

(The DBs should be used of same company of MCB to be used)

suitable for (B) three phase incoming and single phase horizontal type

outgoing Per phase isolation type (PPI) (b) sheet steel double door (IP-

43) (i)4 way [Make:- L&T, Hager, Havells, C&S, Siemens, Legrand]

113 Replace old & us DB by Providing and erecting Sheet Steel powder 11.00 Nos. 1152.41

coated MCB distribution board - flush/ surface mounted fitted with

busbar, neutral link, earth bar and DIN rail, Conforms to IS 8623-1 &

IEC 61439-1 & 3 without MCB to house appropriate nos. of MCBs.

(The DBs should be used of same company of MCB to be used)

suitable for, (A) single phase incoming and horizontal single phase

outgoing, (b) sheet steel double door (IP-43), (iii) 8 way [Make:- L&T,

Hager, Havells, C&S, Siemens, Legrand]

114 Providing and erecting Approved make RCCBs conforming to IS: 26.00 Nos. 2235.13

12640 and having sensitivity of 30 mA and Short Circuit withstand

capacity of 10 KA and suitable for operation on single phase

V,50Hz. having characteristic of quick action & tripping with all

advance feature & do not incorporate any electronic component. for

following Max. rating erected as directed for 40 Amps. DP, rating Cat-

III [Make:- L&T, Hager, Havells, C&S, Siemens, Legrand]

115 Supplying & erecting earth pit of minimum bore dia.150mm size 5.00 Nos. 4591.46

approved make Earthing Electrode consisting Pipe-in-Pipe Technology

as per IS 3043-1987 made of corrosion free hot dipped G.I.Pipes

having Outer pipe dia of 50mm having 80-200 Micron galvanising,

Inner pipe dia of 25 mm having 200-250 Micron galvanising,

connection terminal dia of 12mm with constant ohmic value

surrounded by highly conductive compound with high charge

dissipation suitable for following type of applications with chamber and

heavy duty cover. (A) (approved make OEM has to submit test

certificate including value of earth resistance of installation duly

stamped and signed by agency and officer Incharge has to ensure the

value of earthing resistane mentioned in test Certificate) & having back

filling compound of (B) Inner chemical (CCM Compound) - Resistivity:-

0.2 ohm / meter testing as per IEC 62561-2017, Voltage drop:- < 1 volt

at no load & dry form, Sulphar content :- <2% (C) Back fill Compound :-

Earthing compound should be capable to retain moisture for long time

necessary test report must be submitted by Agency. (a) For Electrical Installation up to 440V in normal soil

length of pipe - 1 Mtr Back filling compound - 1 Nos Bag of 15 Kg.

116 Providing and erecting Annealed bare Copper wire 8 to 16 SWG. 11.00 Kg 794.87

It. Description of Item Qty. Unit Rate in Total

No. Figures Amount

117 Replace old and u/s by Providing and erecting XLPE (IS:7098)(I)-88 760.00 Mtr. 126.25

ISI armoured cable multistrand / Solid Aluminium conductor for 1.1 KV.

to be laid on wall with necessary clamps or in existing trench / pipe of

following size of cables, (B) 4 core 6 Sq. mm [Make:- Havells, KEI,

Finolex, RR Cable, Polycab]

118 Making trench in soft soil of suitable width of 90 cms deep for laying 575.00 Mtr. 55.55

cable or locating the fault all over the run and backfilling the same and

making the surface as normal ground.

119 Providing & laying approved make Double walled corrugated pipes 615.00 Mtr. 62.62

(DWC) of polyethylene (conforming to IS 14930 II) with necessary

connecting accessories of same material at required depth in existing

trench for laying of cable below ground/ road surface for enclosing

cable 50 mm dia.

120 Making trench in Hard Murrum / Tar Road of suitable width of 90 cm or 40.00 Mtr. 432.28

required depth for laying any size of cable or locating the fault all over

the run and back filling the same and making the surface as normal

ground. (B) If additional machinery like hammer driller or JCB use

121 Replace old and u/s by Supplying and erecting approved make 25.00 nos. 6874.06

Octagonal pole made from HR sheet steel. The pole should be made

as per IS. and shall be coated with hot dip galvanizing as per IS 2629/

2633/ 4759, suitable suspend local wind speed with integral Junction

box consist of terminal plate of min 6mm Hylam sheet, standard profile

35mm x 7.5mm Din-Rail for MCB Mounting, stud type terminal and

arrangement for cable termination to be erected with suitable

foundation (Included) as per details given by manufacturer considering

site requirement. (C) 5 Mtr. Long 70 mm top x 130 mm bottom dia,

mm thickness with 200mm x 200mm x 12mm base plate, 4-M16 Bolts

and 600mm long with necessary G.I. J Bolts Approx Pole weight 46 kg

[Make:- Valmont, Bajaj, Transrail, Jindal, Utkarsh, Ambika]

122 Replace old and u/s by Supplying and erecting Street light pole 8.00 Nos. 622.16

bracket comprising main B Class GI pipe of 4.2 cm require outside dia.

complete with suitable B Class G.I. sleeve tubing of approx. 45cms.

length and suitable for 76.5mm / 80mm/ require size of pole top having

nuts and bolts for fixing the brackets and having spread of 0.5 mtr.

Length with 110 deg.with vertical plane and suitable welded stiffener

reducer and nipple with check nut complete painted with one coat.of

Red oxide / PU base primer and two coats of Aluminium / PU paint.

paint with following nos of arms. [B] Double Arm Bracket 0.5 Mtr

123 Replace old and u/s by Supplying and erecting Street light pole 17.00 nos. 491.87

bracket comprising main B Class GI pipe of 4.2 cm require outside dia.

complete with suitable B Class G.I. sleeve tubing of approx. 45cms.

length and suitable for 76.5mm / 80mm/ require size of pole top having

nuts and bolts for fixing the brackets and having spread of 0.5 mtr.

Length with 110 deg.with vertical plane and suitable welded stiffener

reducer and nipple with check nut complete painted with one coat.of

Red oxide / PU base primer and two coats of Aluminium / PU paint.

paint with following nos of arms. [A] Single Arm bracket 0.5 Mtr

It. Description of Item Qty. Unit Rate in Total

No. Figures Amount

124 Supplying & erecting approved make Digital time switch having lithium 1.00 Nos. 3168.37

cell 6 years operative and operate battery backup 1 channel day clock

with 14 memory programme, suitable to operate on 240V + 5%, 16A

with, floating contacts Minimum switching setup time 1 minimum &

LCD display. Also comprised permanent ON/OFF switching.

Programming switches & housed in fire proof thermoplastic enclosure

& transparent cover erected as required with necessary connection

erected as directed.

125 Supplying & erecting power contactor ,AC3 duty for time switch 1.00 Nos. 2782.55

complete erected as per direction Cat III, (D) 4 pole 440V 40 Amp.

126 Replace old and u/s by Supplying & erecting approved make SMC 8.00 Nos. 476.72

press moulded composite FRP loop-in, loop-out approx. 2mm thick

box complete with Bakelite connector strip 5way (3P+N+E), DIN rail for

mounting mob & hinged doors as per requirement having locking

arrangements with mounting clamp with nuts, bolts & washers suitable

for erection on pole with cable clamps& earth bolt of following size of

box. 150mm x 125mm x 100mm [deep] size of box.

127 Replace old & us by Providing & erecting weather proof, dust & vermin 2.20 Sq. 14902.55

proof, floor mounted front operated indoor type cubical panel board Mtr.

necessary IP-42 protection & above as per requirement made from

SWG thick CRC M.S. sheet for outer body & doors, 16 SWG thick

CRC M.S.sheet for internal partitions with necessary supporting

angles, flats including cutting, bending, drilling, welding, riveting with

internal partitions & cable alley as per requirements & instruction of

engineer-in-charge with erection of supplied switch gears, BUSBARS,

with suitable size of inter connecting PVC copper wire / copper-

aluminium strips, rubber grommets, rib, Bakelite control fuses for

measuring instruments, earth bus & earth bolts, foundation flange -

bolts-base Plates, sufficient nos. of hinged doors, handles with locking

arrangement and rubber gasket, heavy duty end terminal connection

128 Replace old & us by Supplying and erecting triple pole & neutral 440V 1.40 Rn. 1961.42

/ 500V panel mounting Copper Busbars with four equal Nos. of Mtr.

electrolyte bus having current density not more than 1.6 Amp. / sq.mm

(Rated current / cross section area) duly wrapped with colour

insulating tape for phase sequence of following current carrying

capacity, erected with necessary bus bar supports / insulators, main

cable socket to each bar, erected in existing cubical panel with

necessary connections. (A) Suitable for 100 Amp. Capacity

129 Replace old & us by Providing and Erecting Approved make Four pole 3.00 nos. 6173.12

moulded case circuit breaker having breaking capacity ICU of 25 KA.

at 415 V,having normal current rating up to 25 A to 100A with Fixed

thermal & magnetic release suitable to work on A.C. supply 50 c/s.

with all internal connections & complete erected in existing 16 G.M.S.

housing. ICS=100% of ICU only Cat III [Make:- L&T, Hager, Havells,

C&S, Siemens, Legrand]

130 Supplying and erecting approved make panel mounting type Digital 2.00 nos. 1558.43

Ammeter having 3 digits LED display, external CT operated, calibrated

for 0 to 1000 Amps suitable to operate on 500 Volt AC, erected on

existing panel board with all connection, wiring etc. with manufacturers

calibration certificate.

131 Supplying and erecting approved make panel mounting type Digital 2.00 nos. 1275.63

Voltmeter having 3 digits LED display, 0 to 750 AC Volts range erected

on existing panel board with all connection, wiring etc. with

manufacturers calibration certificate.

It. Description of Item Qty. Unit Rate in Total

No. Figures Amount

132 Providing & erecting L.T. Current Transformer with bar primary 50/5 to 6.00 nos. 274.72

1000/5 ratio 15 VA burden erected in existing CRCA box duly secured

with insulating materials connected to the meter.

133 Supplying and erecting approved make suitable panel indicator lamps 6.00 nos. 43.43

of LED type lamp, lens cover, Bakelite holder complete erected with

necessary connections.

134 Providing, erecting, fabricating the M.S. structure as per requirement 40.00 Kg 77.77

on site incorporating proper size of M.S. angles, square, round, flats,

bars, channels, sections complete with cutting, welding, grinding &

finishing duly painted with one coat of red oxide with erection on site

as per direction of engineer in charge with necessary grouting,

cementing, plastering & finishing complete.

135 Replace old & us by Providing and erecting XLPE(IS:7098)(I)-88 ISI 80.00 Mtr. 378.75

armoured cable multistrand Aluminium conductor for 1.1 KV. to be laid

on wall with necessary clamps or in existing trench / pipe of following

size of cables, (D) 3 1/2 core 70 Sq. mm ( 35 Sq.mm 1/2 core) [Make:-

Havells, KEI, Finolex, RR Cable, Polycab]

136 Solder less crimping type Aluminium lugs conforming to IS suitable for 6.00 nos. 25.25

cable of following size evenly crimped with high pressure tool &

connected to switchgear terminals with brass / cadmium plated nut

bolts in an approved manner. (E) 70 Sq.mm.

137 Solder less crimping type Aluminium lugs conforming to IS suitable for 264.00 nos. 6.06

cable of following size evenly crimped with high pressure tool &

connected to switchgear terminals with brass / cadmium plated nut

bolts in an approved manner. (A) 1.5/ 2.5/4/6 Sq.mm

138 Providing and, fixing heavy duty flange type brass double compression 2.00 nos. 103.02

type cable gland with rubber ring for PVC insulated armoured cable

complete with out going tails, insulating tape etc for following size of

cables. (C) 3 & 1/2 core 70 Sq. mm

139 Providing and, fixing heavy duty flange type brass cable gland with 66.00 Nos. 38.38

rubber ring for PVC insulated armoured cable complete with out going

tails, insulating tape etc for (B) 2 to 4 core 6 Sq. mm

140 Supplying and erecting Flexible PVC insulated multi strand multi core 133.00 Mtr. 46.46

1.1 kv grade ISI marked copper wires of following size to be erected as

directed. (e) 1.50 Sq.mm 3 core round PVC sheathed [Make:- Havells,

KEI, Finolex, RR Cable, Polycab]

141 Replace old and u/s by Providing and erecting water cooler having 1.00 nos. 49559.69

storage capacity 80Ltr. & cooling capacity 40 Ltr.per hour @ an

ambient temp of 45˚ C. The outlet temp. of the water should drop by

15˚ C within a hour, The water cooler should be comprising of

hermetically sealed compressor, fan motor, condensing unit, water

tank surrounded by evaporating coil, thermostats, relay etc. complete

with necessary inlet & outlet connection. The body of water cooler will

be made from Stainless Steel. [Make:- Voltas, Bluestar, Usha]

142 Supplying & erecting 5 stage single reverse osmosis water purification 1.00 nos. 29187.99

system with M.S. powder coated frame, prefilter housing with 'O' ring

presediment filter GAC filter, carbon filter suitable buster DC pump

capacity 80 psi, mention with 40 psi inline type post carbon filter auto

low & high pressure switches with following size of storage tank & LPH

capacity & erected as directed, [C] 50 Ltr / Hr with 150 psi 2 nos

It. Description of Item Qty. Unit Rate in Total

No. Figures Amount

143 Providing and erecting Inverter based approved make split air- 3.00 Nos. 41725.12

conditioning unit consisting of condensing unit with variable speed fan

motor, inverter type hermetically sealed rotary compressor with

accessories etc. duly connected separately erected evaporating unit

and blower motor with its accessories by means of extra supplied

proper insulated copper tubing,drain PVC pipes suitable for (cost

includes Eco Friendly green gas charging and 15A plug top & Remote

Control & MS Stand) with necessary core cutting. (1) For ISEER

Range (KWH/KWH) (3.1 to 3.99) (B) for 1.5 ton capacity [Make:-

Voltas, Daikin, Carrier, Panasonic]

144 Providing and erecting Inverter based approved make split air- 3.00 Nos. 51666.55

conditioning unit consisting of condensing unit with variable speed fan

motor, inverter type hermetically sealed rotary compressor with

accessories etc. duly connected separately erected evaporating unit

and blower motor with its accessories by means of extra supplied

proper insulated copper tubing,drain PVC pipes suitable for (cost

includes Eco Friendly green gas charging and 15A plug top & Remote

Control & MS Stand) with necessary core cutting. (1) For ISEER

Range (KWH/KWH) (3.1 to 3.99) (C) for 1.7 to 2 ton capacity

145 Supply and Erecting of Static Stabilizer suitable for following capacity 3.00 Nos. 3030.00

of A.C Machine the Stabilizer Must have Minimum Technical

Specification are Input working Single Phase Voltage Range Up to

150V-280V. 50Hz, Output Voltage Range Up to 200V-240V, 50Hz,

Autoreset Facility, LED Display for Indicating Voltage, Spike / Surge

Protection,Time Delay Facility, Proper Wall Mount Facility with required

Accessries & on site 3 year Replacement / Repairing Warranty. (1) For

1.5Ton Thermal Overload Protection 12 Amp. [Make:- V-guard,

Microtek, Gelco, Camipro]

146 Supply and Erecting of Static Stabilizer suitable for following capacity 3.00 Nos. 4029.90

of A.C Machine the Stabilizer Must have Minimum Technical

Specification are Input working Single Phase Voltage Range Up to

150V-280V. 50Hz, Output Voltage Range Up to 200V-240V, 50Hz,

Autoreset Facility, LED Display for Indicating Voltage, Spike/Surge

Protection,Time Delay Facility, Proper Wall Mount Facility with required

Accessries & on site 3 year Replacement / Repairing Warranty. (2) For

2 Ton Thermal Overload Protection 15 Amp. [Make:- V-guard,

Microtek, Gelco, Camipro]

147 Supplying and erecting insulated pair of soft copper tubing open or 18.00 Rmt. 965.56

concealed including power and control cable,necessary PVC drain

pipes for Split AC machine up to 4 TR capacity.

Rs. Two Crore Ninety Four Lakhs, One Thousand Eight Hundred Sixty and Fourty Two Paisa Only.

I/We am/are willing to carry out the work @ ______________ % above/below percent (Should be written

in figures and words) of the estimated rate mentioned above. Amount of my /our tender works out as under.

Estimated amount put to tender Estimated amount put to tender

Deduct………% below Add………% Above

It. Description of Item Qty. Unit Rate in Total

No. Figures Amount

1. The Contractor shall exhibit a board with detailed specification and details of work as directed by the Engineer-In-

Charge for which no extra payment shall be made.

2. The labour cess will be deducted as per prevailing rules i.e. 1% of the work done.

3. GST and Income tax TDS will be deducted at a source while making payments of bills.

4. In all R.C.C. Items in Rate Analysis Standard Cement Consumption has been taken as per Govt. G.R.: PRC-

10/2017 Cement Consumption/16/C, Date:11/05/2017 as stated in S.O.R. therefore in R.C.C. items where there is a

change as per actual mix design the cost of difference of cement consumption have been deducted from the rate of

original item at the rate of input rate mentioned in all the tender.

5. The Contractor will have to submit the all required mix design at his own cost before execution as directed

and to be approved from the Engineer in charge.

Above all items of "Schedule-B" with Item Description, Unit, Rate & Amount have verified by me and

Deputy Executive Engineer Sr. Divisional Account Officer Executive Engineer

Dahod (R & B) Sub Division, Dahod (R & B) Division, Dahod (R & B) Division,

Dahod Dahod Dahod