E Tender for the Material Collection Facility Unit at Kottayam

E Tender for the Construction of Material Collection Facility Unit at Kottayam For more details refer tender documents

Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth up to 30 cm measured at a height of 1 m above ground level and removal of rubbish up to a distance of 50 m outside the periphery of the area cleared

Extra for levelling & neatly dressing of disposed soil completely as directed by Engineer-in-charge.

Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in-charge.All kinds of soil

DR PACKING Under foundation - Dry stone packing under foundation with good quality blasted rubble including conveyance of material and labour charges etc. complete as per direction of departmental officers at site.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources)

Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level:1:1:5:3 (1 cement 1.5 coarse sand :3 graded stone aggregate 20 mm nominal size derived from natural sources)

Centering and shuttering including strutting, etc. and removal of form for:Columns, Pillars, Piers, Abutments, Posts and Struts

Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth levelThermo - Mechanically Treated bars of grade Fe-500D or more

12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand)

Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.Hot finished welded type tubes

Supply and installation of corrugated 0.35 mm thick G.I. roofing sheets over the existing structure using self-tapping screws with rubber and steel washers, including the cost of all materials, labour, hire charges for vehicles, scaffolding, and all incidental works complete. The installation work shall include levelling the G.I. sheets using a water level, proper alignment, fixing, and finishing as required.

Supply and installation of corrugated 0.35 mm thick G.I. cladding sheets for wall surfaces over the existing structure, fixed with self-tapping screws using rubber and steel washers, including the cost of all materials, labour, hire charges for vehicles, scaffolding, and all incidental works complete. The installation work shall include levelling the G.I. sheets using a water level, proper alignment, fixing, and finishing as required.

Supply and fixing of gear-type, handle-operated rolling shutter made of M.S. laths of required size, interlocked throughout their entire length and joined together at the ends by end locks, mounted on a specially designed pipe shaft with brackets. The shutter shall be made of 0.8 mm thick M.S. laths. The cost shall include providing ball bearings, gears, handles, and all accessories as required, including the cost of all materials, labour, hire charges for vehicles, scaffolding, and all incidental works complete. The installation work shall include proper alignment, fixing, and finishing

Supply and installation of 12 mm thick cement boards over the existing structure, fixed with self-tapping screws, applying adhesive in the gaps between boards, and finished with one coat of prime, applying putty and two coats of emulsion paint. The cost includes all materials, labour, hire charges for vehicles, scaffolding, and all incidental works complete. The installation work shall include levelling the cement boards using a water level, proper alignment, fixing, and finishing as required

Supply and installation of 4 mm thick cement board grid ceiling with G.I. channels, fixed with self-tapping screws. The cost includes all materials, labour, hire charges for vehicles, scaffolding, and all incidental works complete. The installation work shall include levelling the grid ceiling using a water level, ensuring proper alignment, fixing, and finishing as required

Supply and laying of premium quality vitrified wall tiles of 6 mm thickness, fixed using premium tile adhesive over a 12 mm thick cement board. The cost includes all materials, labour, hire charges for vehicles, scaffolding, and all incidental works complete. The installation work shall include levelling the tiles using a water level, ensuring proper alignment, fixing with tile adhesive, and carrying out all other related works as required

Supply and laying of premium quality vitrified floor tiles of 8 mm thickness, fixed using premium tile adhesive on the floor. The cost includes all materials, labour, hire charges for vehicles, scaffolding, and all incidental works complete. The installation work shall include levelling the tiles using a water level, ensuring proper alignment, fixing with tile adhesive, and carrying out all other related works as required

Supply and installation of 6mm G.I wire mesh on existing structure using welding, including the cost of all materials, labour, hire charges for vehicles, scaffolding, and all incidental works complete. The installation work shall include levelling the G.I wire mesh using a water level, proper alignment, fixing, and finishing as required.

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:White Vitreous China Wash basin size 630 x 450 mm with a single 15 mm C.P. brass pillar tap

Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required :W.C. pan with ISI marked white solid plastic seat and lid

Supplying and installing ready made PVC Septic tank including the cost of carriage, trenching, placing at the level below ground level as specified as per the direction of engineer in charge (Provision for CC/RCC/Sand/06mm aggregate for the preparation of bed shall be paid separately)<br> 1. Below 15 flush capacity

Supply and installation of 500-litre PVC water tank with all required accessories, including providing water connection using 32 mm PVC pipe from the tank to the building and 25 mm PVC pipe from the building to one tap and two closets. The cost includes the supply and installation of one steel tap and all materials, labour, hire charges for vehicles, scaffolding, and all incidental works complete as required.

Supply and installation of 1.2 m × 2.0 m aluminium door with 4 mm thick half-glass panel. The cost includes all materials, labour, hire charges for vehicles, scaffolding, and all incidental works complete. The installation work shall include levelling the door frame using a water level, ensuring proper alignment, fixing, and finishing as required.

Supply and installation of 1.5 m × 1.5 m sliding type aluminium window with 4 mm thick glass. The cost includes all materials, labour, hire charges for vehicles, scaffolding, and all incidental works complete. The installation work shall include levelling the window frame using a water level, ensuring proper alignment, fixing, and finishing as required.

Supply and installation of 0.8 m × 2.0 m PVC door with all required accessories. The cost includes all materials, labour, hire charges for vehicles, scaffolding, and all incidental works complete. The installation work shall include levelling the door frame using a water level, ensuring proper alignment, fixing, and finishing as required.

Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface:Water thinnable cement primer

Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade:Two or more coats on new work