Repair replacement of water supply distribution of OTM accn of 15 Engr Regt multan lines lancer line pump area other allied works in army area Jodhpur

Amount

Excavating in trenches for soft/loose soil not exc1.5 m wide and n exc 1.5m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10sqm on plan and n exc 1.5m in depth and getting out.

Returning filling in any type of soil including spreading levelling watering and well ramming in layers not exceeding 25 cm in any type of soil.

Removing excavated surplus soil to a distance not exceeding 50 mtr where directed and at a level not exceeding 1.5 M above the starting point.

M & L for taking up cast iron/ductile iron (CI/DI) from water mains (including all fittings), with spigot and socket ends and lead joints/tyton joints of any size all as specified and dirercted by Engr-in-Charge of following sezes :-. (a) 80 mm bore.

(b) 100 mm bore.

( c) 150 mm bore.

( d) 200 mm bore.

(e) 250mm bore.

(f) 300 mm bore.

(g) 350 mm bore.

Supply and lay DI pipe centrifugally cast of class K-7 with spigot and socket ends suitable for tyton joints including rubber gasket for the following sizes :- Make :- Electrosteel/JINDAL/TATA (a) 80 mm bore.

(b) 100 mm bore.

( c) 150 mm bore.

(d) 200 mm bore.

(e) 250 mm bore.

(f) 300 mm bore.

(g) 350 mm bore.

Material and labour for fixing DI specials such as bends(any type, radius and angle),tappers any type, (straight, bend, increasing, decreasing or double socket etc) tee pieces single branch, 'Y' junction, double branch, cross (all sockets or socket and spigot) collars, caps & plugs of sizes :- (a) Upto 150 mm bore .

(b) Above 150 mm bore upto 350mm bore.

Supply and Fixing for cast iron sluice valve incl new rubber gasket, nuts and bolts etc and dismentling of existing unserviceable one of folowing sizes:- (a) 80 mm bore.

(b) 100 mm bore.

(c) 150 mm bore.

(d) 200 mm bore.

Supply and Fixing for stainless steel butterfly valve with complete fitting and dismentling of existing unserviceable one of following size:- Make : Normax/Honeywell/Auna India :- (a) 80 mm bore.

(b) 100 mm bore.

Material and labour for repairing the leakage of lead joints for CI pipe incl bailing out the line water after burning out the existing lead from joints and using extra lead and spun yarn as required and directed for the following sizes:- (a) 80 mm bore.

(b) 100 mm bore.

(c) 150 mm bore.

(d) 200mm bore.

(e) 300/350 mm bore. Note :- Excavation and earth work shall be included in quoted rates.

M&L for taking up/down excavation, returning, filling and removal of excavated soil near pipe line of size as mentioned below in break down maint of raising main line/distribution line. Providing any type of special tools & plants such as JCB & material (such as detachable joints/leak repair clamp suitable for CI/DI fittings, coller/short pieces of pipes or any other fittings as required to minimise the break down time and rectification of the problem as soon as possible. Rectification work must be start within two hours of intimation to contractor. Any delay in rectification may be penalised as deemed fit. (a) 80 mm bore.

(b) 100mm bore.

(c) 150 mm bore.

(d) 200mm bore.

(e) 250mm bore.

(f) 300 mm bore. Note :- Excavation and earth work shall be included in quoted rates.

Material and labour for repairing the leakage of flange end joints for MS/CI pipe by doing welding incl replacement of rubber gasket, nut bolts etc bailing out the line water as required and directed for the following sizes:- (a) 150 mm bore.

(b) 200 mm bore. Note :- Excavation and earth work shall be included in quoted rates.

Taking up or down steel tubing alongwith fittings such as tee, bends etc and connections incl removal from site of the following sizes:- (a) 15mm bore.

(b) 20mm bore.

(c) 25mm bore.

(d) 50mm bore.

(e) 80mm bore.

(e) 100mm bore.

M&L galvanised iron pipe medium grade (ISI marked) with and including medium grade (ISI Marked) fitting concealed or fixed to walls, celling or laid in floors including chase cuttings, making good to distributed surfaces as per existing as directed and specified of the following sizes:- Note: Cost of cutting/leaving/forming chases, holes etc through walls, floor, plinth protection, roof etc with providing clamp/shaddles/locking/fasteners sundry items etc as required and making good the surface to match as per existing shall deemed to be included in quoted rate by the tenderer. (a) 15mm bore.

(b) 20mm bore.

(c) 25mm bore.

(d) 50mm bore.

(d) 80mm bore.

(d) 100mm bore.

Supply and fixing of galvanised iron pipe medium grade (ISI marked) with and including medium grade (ISI Marked) fittings laid in trenches jointed and tested complete all as specified and directed for the following bores;- (a) 20mm bore.

(b) 25 mm bore

(c ) 50 mm bore.

(d) 80 mm bore

Supply and fix gun metal gate valve with iron wheel head screwed both ends for iron pipe and fixed of following sizes incl taking down and removal from site:- (a) 15 mm dia

(b) 20 mm dia

(c ) 25 mm dia.

(d) 50 mm dia

Dismentling of stone massonary valve chamber of any size and pattern and at any position and construction of valve chamber with PCC foundation 1:4:8 type D2 using 40mm graded stone aggregate stone massonary built in cement mortar 1:6 with plastering of 10mm thickness internally and 15mm thickness externally above and below ground level with PCC 1:2:4 type B1 using 20mm graded stone aggregate incl frame made of angles iron of size matches with the internal size of the valve chamber and chamber cover made of solid PVC of superior quality and painting the steel surfaces with two coats of synthetic enamel paint over a coat of red oxide primer incl necessary earth work, excavation etc all as specified and directed by Engr-in-Charge of the following sizes:- (a) 1050 x 750 x 1000 mm

(b ) 900 x 600 x 1000mm

(c) 450 x 450 x 600mm

Material and labour for clamp made of MS flat of size 50x6 mm with nuts & bolts for connection from existing 50-200 mm bore CI/GI pipe line by providing 15 to 50mm bore socket complete incl welding, nuts bolts, rubber sheet etc all as directed by Engr-in-Charge at site.

Replacement of u/s PVC float valve , high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule of following size.Make-Paragon/Polytuff (a) 15 mm bore

(a) 20 mm bore

(a) 25 mm bore

Material and labour for cutting the road for laying of pipe and repair the same with road repair material (Patch mat) all as directed as site width of road cutting would be 0.3 to 1.0 Metre.

M & L cement concrete type B1 1:2:4 (20 mm graded aggregate) complete all as specified and directed.

S&F CI foot valve of following sizes :- (a) 50mm bore.

(b) 80mm bore.

(c) 100mm bore.

(c) 150mm bore.

S&F rectangular 5 layers potable PVC water storage tank hoisted and fixed in position all as specified in SSR Part 1 of capacity 1000 Ltrs. Make : Sintex/Spolyplast/Tirupati/Supercon/ Polycon

S&F rectangular 5 layers potable PVC water storage tank hoisted and fixed in position all as specified in SSR Part 1 of capacity 500 Ltrs Make : Sintex/Spolyplast/Tirupati/Supercon/ Polycon

S&F CI Non Return Valve of following sizes:- (a) 150mm bore.

(d) 80mm bore.

(d) 50mm bore.

S&F CI air release valve with two air outlets, 50mm bore and fixing up in cast iron/ DI water supply mains of size 250/200/150 mm dia with complete fixing arrangement Make : BVI

S&F CI air release valve with two air outlets, 80mm bore and fixing up in cast iron/ DI water supply mains of size 300/350 mm dia with complete fixing arrangement. Make : BVI

Material and labour for attending water supply complaints and rectifying the faults any type including all necessary GI fittings (from 15 mm to 50 mm ) and patty items like rubber gasket, grease, screws, GI Tees, bends, elbows, nipples, unions, cross, plugs, reducers, sockets, short pieces opto 1 Mtr length etc upto entire satisfaction of user and record should be maintained all as directed by Engineer-in- Charge. Note :- 1. Group of one to five (maximum) complaints at one location will be considered as one job. 2. Complaint slip will be printed and supplied by contractor in prescribed format as directed and as specified by Engineer-in-Charge. 3. Cost of all GI fittings and patty items like rubber gasket, grease, screws, GI Tees, bends, elbows, nipples, unions, cross, plugs, reducers, sockets etc (from 15 mm to 50 mm) required to rectify the complaint deemed to be included in quoted rate. No extra payment will be made. 4. GI pipes more then 01 Mtr length, float valves and Gate valves will be measured and paid separately. 5. Contractor will ensured rectifiaction of complaints at same day, failing which an amount of Rs 1000 per day will be recovered from RAR.

Surface dressing not exceeding 15 cm deep complete by removing trees, shrubs, branches of any kind , and cleaning all as directed.

chhaba construction

SHOBHIT BUILDERS

Siddharth Constructions