Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹7.5 LAccepted-AOC BADMAL BALANGIR ODISHA 767070 | BALANGIR | ODISHA | 767070 | L1 | Accepted-AOC Being Lowest Bidder i.e. L1 | |
| 2 | L2₹8.1 L+₹57,198.22 (7.65%)Rejected-Finance | L2 | Rejected-Finance Being L2 |
Tender Value
₹7.2 L
EMD Value
₹14,500
Closing Date
6 Nov 2023, 2:00 pmClosed
General Manager, O F Badmal, Balangir, Odisha
GENERAL MANAGER, O.F. BADMAL. PO- BADMAL, DIST- BALANGIR, PIN-767070 (ODISHA)
RISING THE HEIGHT AND REPAIR TO COMPOUND WALL OF BUILDING NO. 51001 (AMMUNITION HOUSE) IN OFBL ESTATE
2023_MIL_169113_1
3012/Genl/TE-12/EO(C)/2023-24
Open Tender
Civil Works
Item Rate
180 days
Ordnance Factory Badmal
As per NIT eligibility / evaluation criteria along with EMD.
3 documents required · 3 mandatory
₹0
₹14,500
11 Mar 2024
29 Sept 2023
9 Nov 2023
29 Sept 2023
6 Nov 2023
29 Sept 2023
Amount
RISING THE HEIGHT AND REPAIR TO COMPOUND WALL OF BUILDING NO. 51001 (AMMUNITION HOUSE) IN OFBL ESTATE
Material & labour for demolition of brickwork or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles and removing from the premises to a lead of 100mtr as specified and directed.
Taking down cement plaster any description on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc. all as specified and directed.
Material and labour for walling of random rubble, uncoursed, well bonded, bedded and solidly hearted built in cement mortar (1:4) stone masonry as specified and directed.
Material and labour for walling of random rubble, uncoursed, well bonded, bedded and solidly hearted built in cement mortar (1:4) stone masonry(except stone) as specified and directed.
Material & labour for brickwork with fly ash bricks, straight or curved on plan exc 6m mean radius built in cement mortar 1:4 (with modular bricks) as specified and directed.
Material & labour for rendering 15 mm thick cement plaster of 1:4 cement mortar on fair faces of brick work or concrete surfaces as specified and directed.
Material & labour for providing, cement concrete in copings, type B1,1:2:4 (12.5mm graded aggregate) including for use of formwork (straight or curved) as specified and directed.
Material and labour for excavating in trenches not exceeding 1.5 mtr wide and not exceeding 1.5 mtr in depth in foundation and getting out in hard/dense soil as specified and directed.
Material and labour for removing excavated materials not exceeding 50 mtr and depositing where directed at a level not exceeding 1.5 mtr above the starting point as specified and directed.
Material and labour for sand filling under floors or in foundations including watering and consolidation as specified and directed.
Material and labour for cement concrete in foundations, filling and mass concrete of type C2 1:3:6 with (40 mm graded aggregate)as specified and directed.
Material and labour for providing reinforced cement concrete (nominal mix) type B1 (1:2:4) (20 mm graded aggregate) in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete as specified and directed.
Material & labour for providing reinforced cement concrete in columns, pillars, piers, posts and struts (nominal Mix) Type B0 (1:2:4) (12.5 mm graded aggregate) as specified and directed.
Material and labour for formwork (flat rough finished surfaces of concrete) to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams and similar work; vertical or to batter as specified and directed.
Material and labour for form work to side of square, rectangular or polygonal column, rough finished surfaces of concrete flat rough finished surface of concrete as specified and directed.
Supply and fixing for mild Steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending etc. and binding with and including mild steel wire (annealed) not less than 0.9mm dia as specified and directed.
Supply and fixing for Mild Steel TMT bars 8mm dia in stirrups, cut to length, bent to shape required, including cranking, bending etc. and binding with and including mild steel wire (annealed) not less than 0.9mm dia.as specified and directed.
Material & labour for applying two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm all as specified and directed.
SUDARSAN PATEL
stage.html
html • 0.04 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .