Construction of New Anganwadi at D.T.P.S.No.79 (Sultanabad-Bhimpore), F.P.No.162/A in South West (Athwa) Zone. 2nd Attempt

NAME OF WORK : Construction of New Aanganwadi at D.T.P. No.-79 (Sultanabad-Bhimpore), F.P.No.-

162/A in South West (Athwa) Zone.

TENDER NOTICE NO. : Dy.Commissioner/S.W.(Athwa) Zone/No.22/

SR. DESCRIPTION QUANTITY UNIT RATE AMOUNT

WORK UP TO PLINTH LEVEL

1 Excavation for foundation including sorting out and stacking off useful

materials and disposing of the excavated stuff up to 50 mt. lead and all

lift, watering etc.comp.

(A) loose or soft soil with machineries

SMC SOR 2023-24, IT NO. 1, PG. NO.

2 Boring holes 3.5 mt.deep in ordinary soil ( for cast in situ piles) &

disposal of the surplus excavated soil as directed within a lead of 50 M.

For following diameter of piles.

SMC SOR 2023-24, IT NO. 94, PG. NO.

3 Providing & Filling Rubbles including hand packing & filling interstices

with Quarry Spalls behind abutments and between return as directed.

4 Providing & laying C.C 1:3:6 (1cement : 3 sand : 6 graded stone agg

20mm Nominal size) &curing comp. excl. cost of form work in :(a)

foundation & Plinth

(A) Foundation 4.82 C.M. 3005.76

(C) Grade Slab 0.70 C.M. 3005.76

SMC SOR 2023-24, IT NO. 5, PG. NO.

5 Providing & laying cement concrete 1:2:4 (1 cement : 2 sand : 4 graded

stone agg. 20 mm nominal size) & curing comp. Includ. cost of form work

but exclu. Cost of reinforcement for reinforced concrete work in : (A)

Foundation, footing, Base of columns and Mass concrete.

(C) Grade slab 6.75 C.M. 3637.34

SMC SOR 2023-24, IT NO. 95, PG. NO.

6 Providing & laying cement concrete 1:1.5:3 (1 cement:1.5 sand:3 graded

stone agg. 20 mm nominal size)& curing comp. Includ.cost of form work

but exclu. Cost of reinforcement for reinforced concrete work in : (A)

Foundation,footing, Base of columns and Mass concrete.

(A) foundation, footing, base of columns and mass concrete 19.96 C.M. 4146.15

SMC SOR 2023-24, IT NO. 06, PG. NO.

7 Providing & laying ordinary cement con.1:1.5:3 (1cement:1.5sand:

graded stone agg. 20 mm nominal size) finishing smooth curing etc.

comp. Incld. Cost of form work but excl. Cost of reinforcement for R.C.C.

Work in : Up to G.L./P.L.

(1)Having c/s area up to 0.08 s.mt 0.00 C.M. 12632.60

(2) Having c/s area more than 0.08 sq. mt. & upto 0.12 sq.mt 2.00 C.M. 11166.97

(3) Having cross sectional area more than 0.12 sq. mt. 1.00 C.M. 9201.68

(1)Having c/s area up to 0.08 s.mt 0.59 C.M. 9102.61

(2) Having c/s area more than 0.08 sq. mt. & upto 0.12 sq.mt 4.75 C.M. 8174.41

(3) Having cross sectional area more than 0.12 sq. mt. 0.00 C.M. 7086.88

SMC SOR 2023-24, IT NO. 07, PG. NO.

8 Providing & fixing IS Mark TMT Bar FE 500 / FE 500d reinforcement for

R.C.C. work incl. bending, binding & placing in position etc.comp.

Upto G.L./P.L. 2252.00 Kg. 76.21

SMC SOR 2023-24, IT NO. 8, PG. NO.

9 Providing & construction brick work using Fly Ash bricks having crushing

strength not less than 35 Kg./sq.cm. in foundation & plinth in C.M. 1:6 (1

cement:6 sand ) etc. comp. - Ground Floor

10 Filling in trenches with available excavated earth in layer not exceeding

20 cm in depth consolidating each deposited layer by ramming &

11 Providing and filling in plinth with yellow soil or selected soil in layers of

20cm thick including watering, ramming & cosolidation etc. complete

12 carrying out plinth treatment to post construction/existing structure by 59.00 S.M. 82.89

spraying chemical solution for termite control treatment including

labour and material consisting with ISI specification using chlordene and

chiorpurfiles 20 EC as per 6131_part II concentration weight one litter

give 1% concentration inclusive of one litter chemicals emulsions

application at the rate of 5 litter chemicals /sqmt of surface is

recommended as per IS.

SMC SOR 2023-24, IT NO. 127, PG. NO.

13 Providing & Applying 20mm. Th. Heavy Roller plaster on walls or similar

surfaces at all floor levels consisting of 12 mm av. Th. Backing coat of

C.M. 1:3 (1 cement:3 sand) & 8 mm. th. Finishing coat of C.M. 1:1

(1cement: 1 sand) apply thick cement slurry and apply roller horizontal

as well as vartical ( two times ) up to good quality and size of grain in

elevation as per directed by engineer incharge.

14 Providing & applying two coats of weather shield max paint (3 coats may

be required in case of darker colours.)of ICI Dulux or Apex Ultima of

Asian Paint including applying exterior acrylic primer coat as per

manufacturers specification and directions in shade and colour

approved by architects, on exterior surfaces of the building including

scaffolding, preparing the surface, watering, curing etc. complete and as

directed by the architects and manufacturers.

Surface Preparation :

surface is thoroughly clean, dry and free from all loose dirt, chalk,

grease, fungi,algae and flaking paint. This can be achieved by brushing

with a wire/ stiff coir brush, followed by water jetting if required. Fill up

all minor cracks and defects with white cement and sand mixture in the

ratio 1:3. For application on previously painted wall, previous coatings of

paint must be thoroughly scraped off and Clean the surface thoroughly

using wire brushes.

Apply a liberal coat of exterior acrylic primer and allow it to dry for 4-5

hours.Application of putty is not recommended.

Minimum 4-6 hours duration is required between each coat of weather

shield max paint

SMC SOR 2023-24, Color Work IT NO. 17, PG. NO. 16 23.00 S.M 82.00

TOTAL COST UP TO PLINTH

WORK ABOVE PLINTH

15 Providing & laying ordinary cement con.1:1.5:3(1cement:1.5sand:3

graded graded stone agg. 20 mm nominal size) finishing smooth curing

etc. comp. Incl.. Cost of form work but excl. Cost of reinforcement for

R.C.C. Work in :

(1)Having c/s area up to 0.08 s.mt- Ground Floor 0.00 C.M. 12632.60

First Floor 0.00 C.M. 12672.24

Terrace Floor 0.00 C.M. 12711.88

(2) c/s area more than 0.08sq. mt. & upto 0.12 sq.mt - G.F 2.10 C.M. 11166.97

Terrace Floor 0.90 C.M. 11206.61

(3) Having cross sectional area more than 0.12 sq. mt. -- G.F 1.00 C.M. 9201.68

Terrace Floor 0.40 C.M. 9241.32

SMC SOR 2023-24, IT NO. 13, PG. NO.

(1) Having cross sectional area upto 0.08 sq.mt.

Ground Floor 0.30 C.M. 9102.61

Terrace Floor 0.00 C.M. 9142.25

(2) Having cros sectional area more than 0.08 sq. mt and upto

Ground Floor 1.75 C.M. 8174.41

Terrace Floor 0.00 C.M. 8214.05

(3) Having cross sectional area more than 0.12 sq.mt.

Ground Floor 2.60 C.M. 7086.88

Terrace Floor 0.00 C.M. 7126.52

SMC SOR 2023-24, IT NO. 13, PG. NO.

(2) Slabs having more than 8 Cm & upto 10 Cm thickness.

Ground Floor 2.90 C.M. 7984.42

Terrace Floor 0.00 C.M. 8024.06

(3) Slabs having more than 10 Cm & upto 13 Cm thickness.

Ground Floor 0.00 C.M. 7396.96

Terrace Floor 0.00 C.M. 7436.60

(4) Having more than 13 cm. Thickness

Ground Floor 4.55 C.M. 6813.01

Terrace Floor 0.00 C.M. 6852.65

SMC SOR 2023-24, IT NO. 13, PG. NO.

Ground Floor 0.42 C.M. 9531.24

Terrace Floor 0.00 C.M. 9570.88

SMC SOR 2023-24, IT NO. 13, PG. NO.

Ground Floor 0.46 C.M. 5512.83

Terrace Floor 0.00 C.M. 5552.47

SMC SOR 2023-24, IT NO. 13, PG. NO.

16 Providing & laying C.C 1:3:6 (1cement :3 coarse sand :6 crushed stone

agg. 20 m.m Nominal size)& curing comp. incl. cost of from work in: wall

17 Providing & laying ordinary cement con.1:1.5:3(1cement:1.5sand:3

graded graded stone agg. 20 mm nominal size) finishing smooth curing

etc. comp. Incl.. Cost of form work but excl. Cost of reinforcement for

R.C.C. Work in : (A) Stair cases including landings etc.

(A) Stair cases including landing etc.

Ground Floor 0.00 C.M. 7380.20

(B) Vertical and horizontal fins

Ground Floor 0.00 C.M. 10831.75

Terrace Floor 0.00 C.M. 10871.40

SMC SOR 2023-24, IT NO. 14, PG. NO.

18 Providing & fixing IS Mark TMT Bar FE 500 / FE 500d reinforcement for

R.C.C. work incl. bending, binding & placing in position etc.comp.---

Ground Floor 1364.00 Kg 76.21

Terrace Floor 274.00 Kg 77.21

Stair Cabin Top 0.00 Kg 78.21

SMC SOR 2023-24, IT NO. 15, PG. NO.

19 Providing & construction brick work using Fly Ash bricks having crushing

strength not less than 35 Kg./sq.cm. in foundation & plinth in C.M. 1:6 (1

cement:6 sand ) etc. comp.

Ground Floor 11.40 C.M. 4511.97

Terrace Floor 6.60 C.M. 4786.95

Stair Cabin Top 0.00 C.M. 5061.92

SMC SOR 2023-24, IT NO. 16, PG. NO.

20 Providing & constructing Half brick masonary in Fly Ash bricks having

crushing strength not less than 35 kg/sq.cm in c.m 1:4 (1 cement: 4 sand)

curing etc complete.

Ground Floor 29.00 S.M. 678.86

SMC SOR 2023-24, IT NO. 17, PG. NO.

21 Providing & Applying 10mm.th.cement plaster in single coat on brick/

concrete walls similar surfaces for plastering & finished even & smooth

with a floating coat of cement slurry mixed with admixture of lime or

neeru in required proportion etc. comp. in C.M 1:3 (1 cement : 3sand)

(A) for wall and similar surfaces

Ground Floor 170.00 S.M 189.79

Terrace Floor 44.00 S.M 217.93

Stair Cabin Top 0.00 S.M 246.07

(B) for ceilings and soffits of stairs

Ground Floor 56.00 S.M 214.60

Terrace Floor 0.00 S.M 242.74

SMC SOR 2023-24, IT NO. 24, PG. NO.

22 Providing and fixing 150 mm wide, approved quality chicken wire mesh

(FRP / PVC)at junction of brick work and RCC work or two dissimilar

surfaces, at all heights fixed by nails, rowal plugs or tag by cement

mortar 1:3 before applying the plaster, including curing, scaffolding all

complete as directed.

Ground floor 12.00 S.M. 102.00

Terrace Floor 3.00 S.M. 102.00

SMC SOR 2023-24, IT NO. 124, PG. NO.

23 Providing & Applying 20mm. Th. Heavy Roller plaster on walls or similar

surfaces at all floor levels consisting of 12 mm av. Th. Backing coat of

C.M. 1:3 (1 cement:3 sand) & 8 mm. th. Finishing coat of C.M. 1:1

(1cement: 1 sand) apply thick cement slurry and apply roller horizontal

as well as vartical ( two times ) up to good quality and size of grain in

elevation as per directed by engineer incharge.

Ground Floor 80.00 S.M 324.00

Terrace Floor 38.00 S.M 324.00

LMR Floor 0.00 S.M 324.00

SMC SOR 2023-24, IT NO. 28, PG. NO.

24 Providing 35 mm wide throating or plaster drip and moulding it to

R.C.C. chajja etc. comp. For all floor

Ground Floor 10.50 R.M 41.66

SMC SOR 2023-24, IT NO. 29, PG. NO.

25 Providing 20 mm deep finished groove in plaster in line and level etc.

Comp. For all Floor (M.R.)

Ground Floor 64.00 R.M 50.00

SMC SOR 2023-24, IT NO. 30, PG. NO.

26 Providing and laying Vitrified tiles 8 to 10 mm thick, 24" x 24" in flooring

treads of steps and landing laid on a bed of 12mm thick cement mortar

1:3 (1 cement : 3 coarse sand) finishing with flush pointing in white

cement. (Basic Rate-Rs.366.0/S.M.)

Ground Floor 0.00 S.M 1040.35

SMC SOR 2023-24, IT NO. 44, PG. NO.

27 Providing and laying Vitrified tiles 8 to 10 mm thick, 24" x 24" in skrting

risers of steps and dedo on 10mm thick cement plaster 1:3 (1 cement :

coarse sand) and jointed with white cement slurry. (Basic Rate

Ground Floor 16.00 S.M 1081.71

SMC SOR 2023-24, IT NO. 45, PG. NO.

28 Providing & laying Vitrified tiles of 8mm thick of Orient, Kajaria,Jhonson,

Nitco, Somani, Bell, Asian or Euro make in flooring,treads of steps &

Landing laid on bed of 20 mm (Average) base of cement mortar 1:6 (1

Cement : 6 Coarse sand) on new surface or fixing on existing flooring by

adhesive material including dismentaling of existing flooring and jointed

with colour cement slurry including finished with flush pointing &

cleaning the surface etc. comp.Size 24" x 24" (Basic Rate-Rs.485.0/S.M.)

For Antiskid tiles

Ground Floor 6.50 S.M 1397.83

SMC SOR 2023-24, IT NO. 43, PG. NO.

29 Providing & Laying green polished kota stone slab flooring at all floor

levels,over 20 mm av.th.base of C.M. 1:6(1cement: 6 sand) laid

over&joined with grey cement slurry incl. Rubbing & polishing etc. comp.

(A) 25 mm. thick For all Floor

Ground Floor 45.50 S.M 989.45

SMC SOR 2023-24, IT NO. 32, PG. NO.

30 Providing & Laying polished kota stone of machine cut edge slab 25 mm.

thick in riser of steps, tread, dedo & pillars center piece not less than

mt.in width & side pieces of equal size as per design, laid on 10 mm.thick

C.M.1:3 (1 cement : 3 sand) joined, rubbing & polishing etc. For all Floor

Ground Floor 14.50 S.M 1076.94

SMC SOR 2023-24, IT NO. 33, PG. NO.

31 Providing and constructing sandwitch type Granite stone cooking

platform 0.6 mt. wide & 0.75 mt. height, including one end side granite

stone (Double Polish) of 1.25 mt. height & front granite stone patti of

cm wide, vertical partitions of half B.M. wall in C.M. 1:4 and 10mm th.

plaster in 1:3 with finishing smooth with cement slurry as required and

Stainless Steel sink of 0.45 mt x 0.45 mt size of approved quality and

make with required all fitings & fixitures etc. comp as per instruction

given by site in charge at all floors. (Basic rate of Granite Rs.1,200.00 /

Ground Floor 2.32 R.M. 3128.00

SMC SOR 2023-24, IT NO. 123, PG. NO.

32 Providing and filling in depressions of Bath and W.C. At all floor levels,

after completing plumbing work of pans, pipes,traps etc.with cinder or

fly ash as directed by Engineer in charge etc. comp.For all Floors.

All Floor 0.00 C.M 500.00

SMC SOR 2023-24, IT NO. 61, PG. NO.

33 Providing & fixing 35mm.th. Indian teak wood shutters for doors,

windows & clearstory windows incl. Sal wood frames of finished size

12cm x 7cm.incl. Medium quality anodized aluminum fixtures &

fastenings incl. Primer coat of approved quality & two coats of oil

painting etc. For all Floor (A) Fully Panelled

All Floor 0.00 S.M 5533.68

SMC SOR 2023-24, IT NO. 53, PG. NO.

34 Providing and fixing FRP frame size 125x65 mm and 35 mm thick FRP

shutter with wood grain raised panneled design finish shutter having

extra reinforcement on sides & edges in Gel coat finish. The core of the

shutter & frame is to filed up with injected polyurethane foam done in

situ alongwith embedded wooden pieces for stiffening & also taking

hinges & fintures. The whole FRP frame & shutter is to be water proof

weather proof, termite proof & resistance to mild acid/alkali. Rates are

to be inclusive of S.S. hinges with fastener sleeve & alluminium fixtures

(SMC SOR,Pg No.5, It No. 55) 3.19 S.M 2019.98

35 Providing & fixing 35mm thick flush door solid double core type both 0.00 S.M 3720.00

face water proof ply & 15mm th. Laminate shall be pasted on both side

with adhesives as specified by the manufactures. The laminate shall be

as per approved shade & texture of make inc. sal wood frames of

finished 12cm x 7 cm incl. S.S Hinges with necssary screws & Anodized

aluinium fixtures & fastening for all floor

SMC SOR 2023-24, IT NO. 51, PG. NO.

Same as Above But Without Frame

All Floor 11.20 S.M 2520.00

SMC SOR 2023-24, IT NO. 52, PG. NO. 5 MR

36 Providing and fixing window having extruded aluminium colour 0.00 S.M 1705.67

anodized section frame main outer size 63.50 x 38.10 x1.95 mm (of

Jindal section no.4605, @ Wt. 1.094Kg/mt) horizontal Two track

member size 61.85 mm x 31.75 mm x 1.20 mm (of jindal section

no:8687, @ Wt. 0.695 Kg/mt.) vertical member of size 61.85 mm x

mm x 130 mm (of jindal section no:8758 @ wt. of 0.659 kg/mt) with

sliding shutters of horizontal member size 40 mm x18 mm x 1.29 mm ( of

jindal section no:8949, @ Wt. of .456 Kg/mt) vertical member of size

mm x 18 mm x 1.29 mm (of jindal section no:8947, @ Wt. of

Kg/mt/section 8948, @ Wt. of 0.457 Kg/mt) with 5 mm thick tranparent

bronze colour tineted float glass with powder coated aluminium fittings

and fixtures and transparent silicon sealant glass fixing to frame as per

details etc. complete for window.For all Floors.

(A) Same as above but colour anodized 9.00 S.M 1705.67

SMC SOR 2023-24, Aluminium Work, IT NO. 3 (A), PG. NO.

37 Providing and fixing window having extruded aluminium colour 0.00 S.M 1591.87

anodized section frame main outer size 95 mm x 24 mm x 1.17 mm (of

jindal section no:2459 @ Wt. of 0.738 Kg/mt), horizontal Three track

member size 92 mm x 31.75 mm x 1.30 mm (of jindal section no;8688, @

Wt. 1.07 Kg/mt), vertical member of size 92 mm x 31.75 mm x 1.50 mm

(of jindal section no:8933, @ Wt. 1.06 Kg/mt) with sliding shutters of

horizontal member size 40 mm x 18 mm x 1.29 mm (of jindal section

no:8947 @ wt. of 0.456 kg/mt), vertical member of size 40 mm x 18 mm

x 1.29 mm (of jindal section no:8949 @ wt. of 0.456 kg/mt) with 5 mm

thick transparent bronze colour tinted float glass with powder coated

aluminium fittings & fixtures and transparent silicon sealant glass fixing

to frame as per details etc.

(A) Same as above but colour anodized

All Floor 0.00 S.M 1591.87

SMC SOR 2023-24, Aluminium Work, IT NO. 2 (A), PG. NO.

38 Providing and fixing standared extruded of aluminium section of size 63 0.00 S.M 2414.00

x 38.10x 1.20 mm, @ Wt. 0.643 Kg per mt) with colour powder coated

alluminium frame for Lovered Glass ventilation with 5mm thick Figured

glass as details etc. complete for ventilation

A) Same as above but Colour anodized 1.25 S.M 2414.00

SMC SOR 2023-24, Aluminium Work, IT NO. 4 (A), PG. NO.

39 Providing & laying granite slab 18 mm thick in Window-Door

seal,Frames Etc laid on 10 mm thick cement mortar 1:4 (1 Cement:

Coarse sand) with necessary adhesive material and finished with flush

pointing in white or colour cement, including rubbing & polishing comp.

(Basic Rate: Rs. 1000.00/S.M.).For all Floors.

For all Floors. 17.00 S.M 2026.00

SMC SOR 2023-24, IT NO. 41, PG. NO.

40 Labour Charges For Edge Finished For Granite for all floors

For all Floors. 111.50 R.M 43.43

SMC SOR 2023-24, IT NO. 42, PG. NO.

41 Providing and fixing M.S. grills of required pattern to frames of

windows etc., with M. S. flats at required spacing and frame alround of

square or round bars with round headed bolts and nuts or by screws

including applying priming coats of red oxide etc. complete.For all

(A) Plain grill

For all Floors. 200.00 Kg. 104.20

SMC SOR 2023-24, IT NO. 57, PG. NO.

42 Painting two coat (excluding priming coat) on new steel and other

metal surface with synthetic enemal paint, burshing to give an even

shade including cleaning the surface of all dirt, dust and other foreign

matters. (A) For plain grill For all Floor

For all Floors 12.00 S.M 65.31

SMC SOR 2023-24, Color Work, IT NO. 8, PG. NO.

43 Providing and fixing stainless steel ( Grade 304) railing made of Hollow

tubes, channels, plates etc., including welding, grinding, buffing,

polishing and making curvature (wherever required) and fitting the same

with necessary stainless steel nuts and bolts complete, i/c fixing the

railing with necessary accessories & stainless steel dash fasteners

stainless steel bolts etc., of required size, on the top of the floor or the

side of waist slab with suitable arrangement as per approval of Engineer-

incharge, (for payment purpose only weight of stainless steel members

shall be considered excluding fixing accessories such as nuts, bolts,

fasteners etc.).

SMC SOR 2023-24, IT NO. 120, PG. NO. 11 MR 0.00 Kg. 450.00

44 Note: '(1) The whole work is to be executed through specialized agency

with a guarantee of 10 (Ten) years given on a prescribed proforma duly

stamped (2) The rate shall include for work at all floors & conducting

water proof test as directed. (M.R.)

B) Providing and laying integral cement based water proofing treatment

including preparation of surface as required for treatment of roofs,

balconies, terraces etc. consisting of following operations. (a) Applying

and grouting a slurry coat of neat cement using 2.75 kg/sqm of cement

admixed with proprietary water proofing compound comforming to

IS:2645 over the R.C.C. slab including cleaning the surface before

tratment.(b) Laying cement concrete using broken bricks/brick bats

mm to 100 mm size with 50% of cement mortar 1:5 (1 Cement : 5 Coarse

sand) admixed with proprietary water proofing compound conforming

to IS:2645 ,brick bats is finally covered by jointless cement plaster 20mm

th. in C.M. 1:4 added with special water proofing compound confirming

to IS:2645 & top smooth finished with trowel with false chequered

marking of 300 mm.size.The treatment is carried along the vertical

surface of the parapet & other adjoining wall up to height of about

mm in a shape of quarter round vata Incl. curing etc. Comp. With

average thickness of 120 mm and minimum thickness at khurra as

mm.(c) The whole terrace so finished shall be flooded with water for a

minimum period of two weeks for curing and for final test. All above

operations to be down in order and as directed and specified by the

engineer-in-charge. With average thickness of 120 mm and minimum

thickness at khurra as 65 mm. (Cement consumption 0.511 Bags / S.M.)

(c) The whole terrace so finished shall be flooded with water for a

minimum period of two weeks for curing and for final test. All above

operations to be down in order and as directed and specified by the

engineer-in-charge. With average thickness of 120 mm and minimum

thickness at khurra as 65 mm. (Cement consumption 0.511 Bags / S.M.)

Terrace and staircabin top 55.00 S.M 511.00

(A) Providing and laying water proofing treatment to vertical and

horizontal surfaces of depressed portions of W.C.,kitchen and the like

consisting of :

(a) I course of applying cement slurry @ 4.4 kg/sqm mixed with water

For all Floors 0.00 S.M 296.00

SMC SOR 2023-24, IT NO. 62, PG. NO. 6 MR

45 Providing and laying broken china mosaic flooring for terrace using

mm to 20 mm broken pieces of glased tiles of to be laid over cementr

morter 1:3 to plain or slope and to be tempered to bring morter crème

out up to surface using white cement including grounding off jnctions

and extending them up to 15 cm along the wall, clearing with water and

oxalic acid etc as directed.

46 Apply two coats of putty and two coats of primer of approved brand

and manufacture on new wall surface to give an even shade including

thoroughly brushing the surface free from mortar dropping and other

matter and sand papered smooth.

(A) for wall and similar surfaces

For all Floors 270.00 S.M 40.59

SMC SOR 2023-24, Color Work, IT NO. 4, PG. NO.

47 Wall painting (two coats) with plastic emulsion paint of approved brand

and manufacture on undecorated wall surface to give an even shade

including throughly brushing the surface free from mortar droppings and

other foreign matter and sand papered smooth.

(A) for wall and similar surfaces

For all Floors 270.00 S.M 79.39

SMC SOR 2023-24, Color Work, IT NO. 5, PG. NO.

48 Providing & applying two coats of weather shield max paint (3 coats

may be required in case of darker colours.)of ICI Dulux or Apex Ultima of

Asian Paint including applying exterior acrylic primer coat as per

manufacturers specification and directions in shade and colour

approved by architects, on exterior surfaces of the building including

scaffolding, preparing the surface, watering, curing etc. complete and as

directed by the architects and manufacturers. Surface Preparation :

surface is thoroughly clean, dry and free from all loose dirt, chalk,

grease, fungi, algae and flaking paint. This can be achieved by brushing

with a wire/ stiff coir brush, followed by water jetting if required. Fill up

all minor cracks and defects with white cement and sand mixture in the

ratio 1:3. For application on previously painted wall, previous coatings of

paint must be thoroughly scraped off and Clean the surface thoroughly

using wire brushes. Priming: Apply a liberal coat of exterior acrylic

primer and allow it to dry for 4-5 hours. Application of putty is not

recommended. Minimum 4-6 hours duration is required between each

coat of weather shield max paint.For all Floors.

For all Floors 118.00 S.M 82.00

SMC SOR 2023-24, Color Work, IT NO. 17, PG. NO. 16 MR

49 Providing & laying granite slab 18mm thick in flooring, treads of steps

and landing laid on bed of 20mm thick cement mortar 1:6 (1 Cement :

coarse sand) or lime mortar 1:1.5 laid and finished with flush pointing in

white or colour cement including rubbing and polishing complete. (Basic

Rate:- Rs.1347.46/S.M.)

For all Floors. 0.00 S.M 2410.00

SMC SOR 2023-24, IT NO. 39, PG. NO. 4 MR

50 Providing & laying granite slab 18mm thick in skirting, risers of

steps,dedo and pillars laid on 10mm thick cement mortar 1:4 (1 Cement

: 4 Coarse sand) and finished with flush pointing in white or colour

cement including rubbing & polishing comp.. (Basic Rate:-

SMC SOR 2023-24, IT NO. 40, PG. NO. 4 MR 0.00 S.M 2449.00

51 Providing and fixing M.S. Fan clamps type 1 to 16 mm dia M.S. bar bent

to shpe with hooked ends to RCC slabs curing, layig including painting

the exposed portion of loops, all as per standard design complete.

For all Floors. 5.00 Nos 129.02

SMC SOR 2023-24, IT NO. 59, PG. NO.

52 Steel work welded in built up sections, framed work including cutting,

hoisting, fixing in position and applying a priming coat of red lead paint

(A) in beams & joists channels angles, tees, flats with connection plates

or angle cleats as in main & cross beams,hip & trussed purlins connected

to common raffers & the like. For all Floor

For all Floors. 5.00 Qtl. 9047.86

SMC SOR 2023-24, IT NO. 98 (A), PG. NO.

53 Providing & fixing in position collapsible steel shutters with vertical

channels 20 x10 x 2 mm. Braced with flat iron diagonals 20 x5mm size

with top & bottom rails of T-iron 40x40x6mm. with 38mm dia. steel

pulleys comp. with bolts, locking arrangements, stoppers, handles incl.

applying a priming coat of Redlead paint etc. comp.

Ground Floor 0.88 S.M 5865.10

SMC SOR 2023-24, IT NO. 58, PG. NO.

54 Providing & fixing at all floor levels, both face polished machine cut edge 6.274 S.M 1050.00

Marble slab for shelves joined with grey/White cement slurry (1:1) incl.

Rubbing & polishing etc. complete. (M.R.) (Basic Cost Rs. 450/S.M.)

SMC SOR 2023-24, IT NO. 66, PG. NO. 7 MR

55 Wall Vinyl Sticker 2.00 SQ. FT. 28.00

SMC SOR 2023-24, IT NO. 146, PG. NO. 13 MR

56 Eco Solvent Vinyl Sticker (120 gsm) with Lamination (100 gsm) 2.00 SQ. FT. 38.00

SMC SOR 2023-24, IT NO. 147, PG. NO. 13 MR

57 Solvent Vinyl Sticker (120 gsm) with Lamination (100 gsm) 2.03 SQ. FT. 22.00

SMC SOR 2023-24, IT NO. 148, PG. NO. 13 MR

58 5mm PVC sheet Eco Vinyl (Any size) 2.00 SQ. FT. 55.46

SMC SOR 2023-24, IT NO. 149, PG. NO. 13 MR

59 Decorative theme base designing & painting with all waterproof 58.00 SQ. FT. 63.00

SMC SOR 2023-24, IT NO. 150, PG. NO. 13 MR

TOTAL COST OF SUPER

Water Supply & Sanitation

60 Prov.& Fixing water closet squatting pan (Orissa type W.C.pan) at all

floor levels, size 580mm incl. 100 mm size "P'or "S" trap for water closet

squatting pan joining the trap with the pan & soil pipe in C.M. 1:1

(1cement :1 fine sand) etc. Comp.(A) Vitreous china long pattern of

approved colour For all Floor

For all Floors. 1.00 Nos. 1401.60

SMC SOR 2023-24, IT NO. 67, PG. NO.

61 Providing and fixing Wash Down Water closet European type W.C. pan

with integral P or S trap including jointing the trap with soil pipe in

cement mortar 1:1 (1 cement : 1 find sand) (seat and cover to be

measured and paid for separately) (A) Viterous china pattern - I (i) in

approved colour

For all Floors. 1.00 Nos 1303.71

SMC SOR 2023-24, IT NO. 68, PG. NO.

62 Providing and fixing plastic seat and cover for wash down water closet

with C.P. brass hinges and rubber buffers (B) Plastic seat and cover

For all Floors. 1.00 Nos 291.33

SMC SOR 2023-24, IT NO. 69, PG. NO.

63 Providing & fixing wash basin with single hole for pillar tap at all floor

levels, with C.I. or M.S. Brackets painted white incl. cutting holes &

making good the same incl. fittings such as pillar tap, capstan head screw

down high pressure with screws, shanks & back nuts, C.P. Brass waste

trap, screw down stop tap 15 mm. dia. etc. complete. (A) Vitreous china

flat back wash basin 550 mm.x 400 mm. size in approved colour For all

For all Floors. 2.00 Nos 2059.93

SMC SOR 2023-24, IT NO. 70, PG. NO.

64 Providing & fixing 600 mm.x 450 mm. mirror of superior glass at all

floor levels, mounted on 6 mm. th. A.C. sheet or plywood sheet & fixed

to wooden plugs with C.P.brass screws and washers etc. For all Floor

All Floor 2.00 Nos 833.73

SMC SOR 2023-24, IT NO. 72, PG. NO.

65 Providing & fixing C.P. brass pillar cock with copper connection, C.P.

brass screws complete

Make- Cera, Parry ware, HindWare, Jaquar

For all Floors. 2.00 Nos 1423.00

SMC SOR 2023-24, Sanitary Items, IT NO. 1, PG. NO.

66 Providing & Fixing C.P. Brass screw down bib tap at all floor levels,

polished bright etc. comp.-(A) 15mm dia. For all Floors

All floor 3.00 NO 186.83

SMC SOR 2023-24, IT NO. 80, PG. NO.

67 Providing & Fixing chromium plated brass half turn flush cock at all floor

levels, of approved quality incl. fixing in pipe line etc. Comp.-- 25 mm dia

SMC SOR 2023-24, IT NO. 81, PG. NO. 8 2.00 NO 263.77

68 Providing & fixing 15mm C.P. brass angle valve (Stop Cock) with C.P.

copper connecting pipe 450 mm long and nuts, washer and brass flange

complete, including cutting and making good the wall where required.

Make- Cera, Parry ware, HindWare

For all Floors. 2.00 Nos 1432.00

SMC SOR 2023-24, Sanitary Items, IT NO. 5, PG. NO.

69 Providing and fixing Towel Ring fabricated from seamless stainless steel

tube 2mm thick in bath room with polished wall flange at end of bars

with heavy duty anchor fasteners & accessories

Make- Cera, Parry ware, Jaquar ,HindWare

For all Floors. 2.00 Nos 890.00

SMC SOR 2023-24, Sanitary Items, IT NO. 10, PG. NO.

70 Providing & Fixing stainless steel recessed type Soap dish of approved

make. Including providing & fixing screws, washers, cutting & making

good the walls.

Make- Cera, Parry ware, Jaquar ,HindWare

For all Floors. 2.00 Nos 793.00

SMC SOR 2023-24, Sanitary Items, IT NO. 12, PG. NO.

71 Providing and fixing PVC SWR Nahni trap IS 14735 for drain - 75 mm

diameter with jali of the following nominal diameter of self cleaning

design with C.I. scread down or hinged grating including the cost of

cutting and making good the walls.

All floor 4.00 Nos 558.36

SMC SOR 2023-24, IT NO. 88, PG. NO.

72 Providing & Fixing U-PVC pipe (SWR) confirming to IS no.

(Type"B") of Prince/ Supreme/ Jain/ Astral/ Tulsi/ Finolex make for soil

and waste discharge system at all floor levels incl. All fixtures like bends,

tees,shoe etc. jointed with resin of approved brand & manufacture etc.

SMC SOR 2023-24, IT NO. 84, PG. NO. 8 MR

73 Providing & fixing U-PVC pipes Confirming to IS no. 13592 (Type "A") of

Prince/ Supreme/ Jain/ Astral/ Tulsi/ Finolex make for rain water at all

floor levels incl. fixtures like bends, tees, shoe etc joined with resin of

approved brand & manufacture etc. comp. (M.R.) (A) 75 mm. Dia.

SMC SOR 2023-24, IT NO. 85, PG. NO. 8 MR

74 Providing and fixing in position P.V.C. cowl vent to pipes of prince,

suprime, jain Or Eqivalent make etc. comp (M.R).

SMC SOR 2023-24, IT NO. 89, PG. NO. 8 MR

75 Providing & Fixing Kathi around the vertical PVC drainage pipes for

concealing with cement plaster 20 mm avg thickness(CM 1:3 [1 cement

:3 coarse sand]) finishing as per instruction given by Eng. incharge. For

75mm PVC pipe 12.00 R.M 173.00

SMC SOR 2023-24, IT NO. 93, PG. NO. 8 MR

76 Providing, Laying and jointing on true line and level UPVC pipe (SCH-40)

line of prince/Supreme/Jain/Astral/ Tulsi/Finolex make including fittings

make or equivalent as approved by angineer-in-charge. Pipe shall be

fixed on the wall the help of clamp at every two meter C/C or shall be

concealed as directed including necessary fittings etc. including testing

of pipe and joints and fixing the same with adhesive solvent, including

cost of all materials.

SMC SOR 2023-24, IT NO. 86, PG. NO.

77 Providing & Fixing P.V.C. pipes (SCH-80) of Prince/ Supreme/ Jain/

Astral/ Tulsi/Finolex make for water supply line at all floor levels incl.

fixtures like bends, tees, shoe etc joined with resin of approved brand &

manufacture etc. comp. Pipe shall be fixed on the wall the help of clamp

at every two meter C/C or shall be concealed as directed including

necessary fittings etc. including testing of pipe and joints and fixing the

same with adhesive solvent, including cost of all materials.

SMC SOR 2023-24, IT NO. 87, PG. NO. 8 MR

78 Providing and fixing M.S. holder bat clamps at all floor level,of approved

design to C.I. or S.C.I pipes including cost of cutting holes and making

good the wall etc. comp. (M.R)

SMC SOR 2023-24, IT NO. 90, PG. NO. 8 MR

79 Providing and fixing G.I. holder "Z" clamps at all floor level,of approved

design to C.I.S.C.I. or PVC pipes including cost of cutting holes and

making good the wall etc. comp. (M.R)

(C) 150 mm to 200 mm dia 0.00 NO 98.00

SMC SOR 2023-24, IT NO. 121, PG. NO. 11 MR

80 Providing and fixing gun metal check or non return full way wheel valve

at floor levels,etc. complete.

SMC SOR 2023-24, IT NO. 80, PG. NO.

81 Providing and fixing abonite ball cock of approved quality as directed

SMC SOR 2023-24, IT NO. 82, PG. NO.

82 Providing, Lowering and laying joining R.C.C. NP2 CLASS pipe in cement

mortar in proportion 1:1 of following nominal internal diameters

including testing of pipes and joints etc. complete.

SMC SOR 2023-24, IT NO. 77, PG. NO.

SMC Storm drainage SOR 21-22, Page no1, IT No.1

83 Providing and fixing s.w. Gully trap with C.I. gratting brick masonary

chamber and water tight Pre cast R.C.C.cover of 300mm X 300mm size

(inside) including plastering smooth inside and outside 15 mm thick in

C.M 1:3 etc. comp.i) square mouth traps (A) 300 MM X 300 MM Size - P

type.For all Floors.

SMC SOR 2023-24, IT NO. 74, PG. NO. 7 3.00 Nos 1098.48

84 Prov. & Fix. 10 cm.x15 cm.(4" x 6") S.W. trap with Inside dimension, 455 0.00 No. 3155.63

x 610 mm & 450 mm deep sewer trap chamber with 23 cm th' B.B.

masonary walls in C.M 1:5 with cement plaster 15 mm th' in C.M. 1:3

inside & outside to exposed faces, R.C.C. top slab with 1:2:4 mix (

cement: 2 Sand : 4 Grade stone aggregate 20mm size) ,Foundation

concrete 1:5:10 & fixing C.I. cover with frame to be not less than 38 kg.

On top etc. comp. for single pipe.'.(A) Precast RCC heavy duty Cover

instead of C.I. Cover

(A).Same as above but Precast RCC heavy duty Cover instead of C.I. 1.00 No. 2904.47

Extra for every additional depth of 0.1 mt.beyond 0.45 mt. 0.00 Each 222.71

SMC SOR 2023-24, IT NO. 75, PG. NO.

85 Providing & construction simple chamber of 23 cm. th' B.B. Masonary in 0.00 No. 2932.93

C.M 1:5 with cement plaster 15 mm th' in C.M. 1:3 inside & outside to

exposed faces, R.C.C. top slab with 1:2:4 mix ( 1 cement: 2 Sand :

Grade stone aggregate 20mm size), Foundation concrete 1: 5: 10 & fixing

C.I. cover with frame to be not less than 38 kg. On top etc. comp. Inside

dimension, 455 x 610 mm &450 mm deep for single pipe

(A).Same as above but Precast RCC heavy duty Cover instead of C.I. 2.00 No. 2681.76

Extra for every additional depth of 0.1 mt.beyond 0.45 mt. 0.00 Each 242.39

SMC SOR 2023-24, IT NO. 76, PG. NO.

86 Providing and fixing C.I. manhole cover 0.60 mt. x 0.45 mt. size having

weight not less than 35 kg. etc. complete.

SMC SOR 2023-24, IT NO. 83, PG. NO. 8 2.00 NO 958.17

87 Providing and fixing G.I, Rain water spout of 50 mm dia and 30 cm

SMC SOR 2023-24, IT NO. 64, PG. NO. 6 0.00 NO 101.91

88 Providing & fixing white vitreous china urinal of size 450 x325mm as per

IS-2556 (Part-2 ) with C.I. hangers and 15mm dia. C.P. spreader,32mm

dia CP bottle trap and pipe to wall with C.P. flange complete including

cutting and making good the walls and floors wherever required.

Make- Cera, Parry ware, Jaquar ,HindWare -All floor 0.00 NO 2476.00

SMC SOR 2023-24, Sanitary Items, IT NO. 8, PG. NO.

89 Providing & fixing at all floor levels,both face polished machine cut edge

Marble slab for urinal partition joined with grey/White cement slurry

(1:1) incl. Rubbing & polishing etc. complete. (M.R.)( Basic Cost Rs.

90 Providing & laying ordinary C.C.1:1.5:3 mix for R.C.C. work incl. boxing,

centering, vibrating, curing & mixed with approved water proofing

cement compound or "CEMWET"or"PIDICRETE LW"integral water

proofing admixture as water proofing agent to be mixed with 50 kg.

cement bag shall be as recommended by the manufacture of the water

proofing material, concrete work for top, bottom slab & side pardi for

under ground Tank & Item incl. Necessary excavation & refilling the

available earth, 15 cm th' C.C 1:4:8 for bedding concrete, Half B.M. in

C.M. 1:4 outside wall, inside R.C.C. pardi as per design, 10mm.th. water

proofing cement plaster in C.M. 1:3 with smooth finishing,watering

etc.Comp.to all inner face of tank curing etc. comp. incl. Locking

arrangement, outlet, inlet, overflow & wash out pipe arrangement as

necessary & C.I. Cover 0.60 x .045 weight not less then 35kg. etc. com. as

per structural drawing excluding Steel & as directed by Engineer-in-

Under Ground water Tank 5000.00 Lit 5.46

SMC SOR 2023-24, IT NO. 60, PG. NO.

91 Providing & Laying white glazed tiles 6mm. th. of Orient, Kajaria,

Jhonson, Nitco, Somani, Bell make at all floor levels, in flooring, treads of

steps & landings laid on a bed of 12 mm. Av. Th.C.M.1:3 (1cement :

sand) finished with flush pointing in white cement etc.com. For all floors

(Basic Rate:- Rs.285.0/S.M.)

Under Ground water Tank 4.00 SM 857.42

SMC SOR 2023-24, IT NO. 34, PG. NO.

92 Providing & Laying white glazed tiles 6mm. th. Of Orient, Kajaria,

Jhonson, Nitco, Somani, Bell make at all floor levels in skirting risers of

steps & dado on 10 mm. th. C.M.1:3 (1cement :3 sand) including

necessary cement paste for fixing and joined with white cement slurry

etc.complete. For all floors (Basic Rate:- Rs.285.0/S.M.)

Under Ground water Tank 12.00 SM 887.64

SMC SOR 2023-24, IT NO. 35, PG. NO.

93 Providing & fixing IS Mark TMT Bar FE 500 / FE 500D reinforcement for

R.C.C. work incl. bending, binding & placing in position etc. comp. Upto

Upto G.L./P.L. 400.00 Kg. 76.21

SMC SOR 2023-24, IT NO. 8, PG. NO.

94 Providing erecting and fixing double coated Sintex/Super/Reno PVC (ISI) 2000.00 Lit 3.95

mark water tank of required capacity each with all necessary fittings &

connection etc. complete on terrace.

SMC SOR 2023-24, IT NO. 92, PG. NO.

Total cost of Water supply & sanitation

ELECTRIFICATION WORK

Sr. Description Total Qty. Unit SETC Cost Total

INTERNAL WIRING

1 Point wiring for Light / Bell with 2-1.5 sq.mm & earth wire of 1.5 20 Pt. 471.92

sq.mm (Green) both are of ISI marked

1.1 KV grade FRLS PVC insulated multi strand copper wires up to

mtr length , in below type of pipe erected with 6A Modular type

switch / bell push & accessories and earth continuity of following

type, erected on PVC / Metallic/Wooden box, single mounting

base frame covered with textured/metallic/white front

plate modules erected on / in wall / ceiling as per pipe erected,

with necessary Lamp holder/ceiling rose / H.D.Connector as directed.

(f) with medium class Rigid PVC pipe and accessories erected

2 Point wiring for secondary light point with 2-1.5 sq.mm & earth 5 Pt. 159.08

Note:- sq.mm (green)

Maximum up to both are length,

6 mtrs of ISI marked

willKVbegrade FRLS PVC

(f) with medium class Rigid PVC pipe and accessories erected

concealed in wall/ceiling complete

3 Point wiring for FAN with 2-1.5 sq.mm & earth wire of 1.5 sq.mm 2 Pt. 660.69

(Green) both are of .ISI marked 1.1 KV Grade FRLS PVC insulated

multi strand copper wires up to 10 mtr length, in below type of pipe

erected with 6A Modular type switch and hum free EME step type

electronic fan regulator mounted and accessories with earth continuity of

following type erected on PVC

/ Metallic/Wooden box, single mounting base frame covered with

textured/metallic/white front plate modules erected on / in wall /

ceiling as per pipe erected. with necessary ceiling rose / H.D.Connector as

(f) with medium class Rigid PVC pipe and accessories erected

concealed in wall/ceiling complete, Cat. III

4 Point wiring for Individual Plug with & earth wire of 10 Pt. 497.37

1.5 sq.mm (Green) both are of ISI marked 1.1 KV grade FRLS PVC insulated

multi strand copper wires up to 10 mtr length, in below type of pipe

erected complete with Modular type switch & 5 pin Plug erected on PVC

/ Metallic/Wooden box covered with appropriate front plate modules

erected on / in wall / ceiling as per pipe erected with following type of

[I] For 6A Plug and 6 a switch with 2-1.5 sq.mm Cu. Wire from nearby

switchboard/mcb db board

(f) with medium class Rigid PVC pipe and accessories erected

concealed in wall/ceiling complete, Cat. III

5 Point wiring for Individual Plug with & earth wire of 5 Pt. 697.91

1.5 sq.mm (Green) both are of ISI marked 1.1 KV grade FRLS PVC insulated

multi strand copper wires up to 10 mtr length, in below type of pipe

erected complete with Modular type switch & 5 pin Plug erected on PVC

/ Metallic/Wooden box covered with appropriate front plate modules

erected on / in wall / ceiling as per pipe erected with following type of

[II] For 16A Plug and 16 amp switch with 2-2.5 sq.mm Cu. Wire from

(f) with medium class Rigid PVC pipe and accessories erected

concealed in wall/ceiling complete, Cat. III

6 Point wiring for on board Looped Plug with 6A Modular type switch 5 Pt. 253.46

& 5 pin socket erected on PVC / Metallic/Wooden box, single

mounting base frame covered with textured / metallic/white front

plate modules erected on / in wall / ceiling with following type

accessories, Cat. III

7 Point wiring for Two Way Controlled Light Point with 2-1.5 sq.mm 1 Pt. 588.58

& earth wire of 1.5 sq.mm (green) both are of .ISI marked 1.1 KV

grade FRLS PVC insulated multi strand copper wires erected in below

type of pipe with 6A Modular type switches and following type of

accessories erected on PVC / Metallic/Wooden box, single

mounting base frame covered with textured / metallic/white front

plate modules erected on / in wall / ceiling as per pipe erected. with

necessary batten/angle holder or ceiling rose or H.D.Connector as directed.

(f) with medium class Rigid PVC pipe and accessories erected

concealed in wall/ceiling complete, Cat. III

8 Providing following type of Modular Type Accessories

mounted with PVC / metallic/Wooden box, single mounting base frame

covered with textured

/ metallic/white front plate , modules erected with necessary

connections as per site situation directed by Engineer In charge.

(1)One No. SP 6 Amp.Cat. III 10 Ea. 151.65

(2) One No 5 pin plug 15 Ea. 151.65

(3) Two Pin/RJ-11 Telephone Socket

[A] For One Gang, Cat. III 1 Ea. 161.20

[B] For Two Gang, Cat. III 1 Ea. 211.03

(4) TV Co-axial Socket outlet, Cat. III 1 Ea. 161.20

(7) Blank Plate Single, Cat. III 1 Ea. 25.45

(8) Computer RJ-45 socket, Cat. III 1 Ea. 161.20

(22) 16/20/25 Amp. Modular Starter for Motor / A.C. 1 Ea. 499.50

(19) Modular Indicating Call Bell, Cat.III 1 Ea. 329.81

(20) Modular Buzzer, Cat.III 1 Ea. 150.59

9 Providing and erecting ISI mark Medium class RIGID PVC PIPES of

following size complete to be erected on/in wall or ceiling erected

with necessary PVC fittings & Junction boxes fixed with adhesive

solution & Clamps with following dia of pipes, in approved manner as

10 Providing & erecting PVC Corrugated Flexible Conduit with

required nos. of coupling, PVC bushes, Check-nuts etc. complete of

following sizes.

11 Supplying & erecting UPVC Mini trunking (PVC Casing-n-Capping)

having double-locking arrangement with grooves, trunking of size

12.5 mm in height as per IS with accessories of PVC/Resin

polypropylene not below 1.8 mm thick duly sealed in joint & erected on

wall / ceiling of following size .

12 Providing and erecting Mains with 1.1 KV grade FRLS PVC insulated ISI

marked stranded Copper conductor wire in following type of pipe to be

erected concealed in /flushed on wall/ceiling, with 1.5 sq. mm copper

conductor FRLS PVC insulated stranded wire of green colour for earth

continuity of following size

(A) With medium class Rigid PVC pipe and accessories

(a) 2 wire 1.5 sq. mm 150 Mtr. 59.59

(b) 2 wire 2.5 sq. mm 70 Mtr. 78.78

13 providing and erecting Mains with 1.1 KV grade FRLS PVC insulated ISI

marked stranded Copper conductor wire in following type of pipe to be

erected in / on wall

/ ceiling with 2.5 sq. mm copper conductor FRLS PVC insulated

stranded wire of green colour for earth continuity of following size

(A) with medium class Rigid PVC pipe and accessories

(a) 2 wire 4 sq. mm 20 Mtr. 107.06

14 Providing & Erecting approved make following size of TV Co-axial

flexible cable comprising inner conductor of solid bare copper

insulated with Foam PE & Secondary conductor made of poly - Aluminium

film bonded Al. Braids @ suitable coverage overall sheathed with

black PVC insulation.

15 Providing & erecting Switch board for Computer or electric

apparatus consisting of following items in single board erected on PVC

/ Metal/Wooden board concealed/open with 3 mm thick PC

(Polycarbonate) / Acrylic sheet erected as directed

1 no. 6A/16A universal plug-switch combined. 3 nos. 6A Switch

3 nos. 6A 5 pin Plug

For Modular Type Accessories, Cat. III 1 Ea. 1081.71

16 Decorative call bell Ting-tong box type 250 volts 1 Ea. 68.68

complete erected

L.T. SWITCHGEAR AND DIST. BOARD & L.T. PANEL

17 Providing and erecting Sheet Steel powder coated MCB distribution board

- flush / surface mounted fitted with busbar, neutral link, earth bar

and DIN rail, Conforms to IS 8623-1 & 3, IEC 61439-1 & 3 without

MCB to house appropriate nos. of MCBs.(The DBs should be used of

same company of MCB to be used) suitable for

(A) single phase incoming and horizontal single phase outgoing

(b) sheet steel double door (IP-43)

18 providing and erecting Miniature circuit breaker single pole 6A to 6 Ea. 112.11

25A suitable to operate on 240 V

A.C. system and having breaking capacity 10 KA to be erected in existing

box. confirming to IS 8828/1996 with ISI Mark, Cat. III (10 Amp)

19 Providing & erecting 240 V MCB double pole switch for lighting Load 1 Ea. 278.76

(B Curve) having 10 KA breaking capacity & confirms to IS : 8828 in

existing box having following capacity (A) 25 Amp. & 10 Amp Cat III

20 providing and erecting Approved make RCCBs conforming to IS:

12640 and having sensitivity of 30 mA and Short Circuit withstand

capacity of 10 KA and suitable for operation on single phase

V,50Hz. having characteristic of quick action & tripping with all advance

feature & do not incorporate any electronic component. for following

Max. rating erected as directed (i) 25 Amps.DP, Cat III

(i) 25 Amps. DP, Cat. III 1 Ea. 1969.50

21 providing and erecting Approved make RCCBs conforming to IS: 1 Ea. 2235.13

12640 and having sensitivity of 30 mA and Short Circuit withstand

capacity of 10 KA and suitable for operation on single phase

V,50Hz. having characteristic of quick action & tripping with all advance

feature & do not incorporate any electronic component. for following

Max. rating erected as directed (i) 40 Amps.FP, Cat III

(ii) 40 Amps. FP, Cat. III 1 Ea. 2637.11

22 Providing & erecting 240 V MCB double pole switch for motor & 1 Ea. 299.97

inductive load (C Curve) having 10 KA breaking capacity & confirms

to IS : 8828 in existing box having following capacity (A) 6 to 32 Amp.

23 Plastic enclosure fitted with DIN rail suitable for incorporating One 1 Ea. 52.52

24 Plastic enclosure fitted with DIN rail suitable for incorporating 1 Ea. 108.07

Three /Four nos. MCB

25 Sheets steel powder coated enclosure suitable for incorporating 1 Ea. 176.75

One/Two nos. MCB.

26 Providing and erecting metallic vitrified danger notice board as 1 Ea. 69.69

per language suggested by engineer incharge for MEDIUM VOLTAGE

installation to be erected as per IS-2551.

27 Providing & erecting Medium Voltage Danger Notice Board sticker as 1 Ea. 26.26

per language suggested by engineer incharge of standard size as per IS-

28 providng and erecting Approved make single phase electronic energy 1 Ea. 1738.21

meter rating 5A/20A/40A based on ASIC (Application Specific integral

circuit) digital technology with accuracy Class-I, temper proof, free from

effect of external magnetic field with phase, earth, reverse and impulse

indications, 6 digit electro- mechanical counter suitable to work on

V to 300V, 45 - 55 Hz., housed in robust enclosure complete to be erected as

directed with 3 year replacement guarantee. Cat. III

INDOOR LIGHTING ITEM

29 Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt

to 0.5 Watt assembled on single MCPCB, with housing used as a heat

sink shall be made of thick sheet Steel conforming to IS: 513/CRCA/

aluminium die cast powder coated and high U.V. & corrosion

resistance with diffuser with company mark/name 160V to 270V,

Power Factor more than 0.9, THD < 15%,

CCT 3000 K to 6500K,

Luminaire efficacy> 85 lumens/watt ,LED LED driver efficiency > 85 %

( fitting required LM-79 & LM-80 Certificates)(NOTE: Below description

have shown ranges of Wattage capacity of LED fittings.The Engineer

incharge may select any wattage capacity between the ranges

(A) Tube Light with integral driver

(i) 5-10 Watts, Surge-2 KV, IP-20, conventional 1 to 2 1 Ea. 165.64

(iv) 22-24 Watts, Surge - 2KV,IP-20, conventional 4 13 Ea. 373.70

(v) 36-40 Watts, Surge-2 KV, IP-20, conventional 4 5 Ea. 535.30

30 Supplying and erecting LED lamps with following wattage capacity

of 220 to 240 voltage, minimum 15000 burning hours life,

V in built-surge protection,Polycarbonate diffuser, mounting suitable

for E14 / E27 / B22 lamp holders, pf >=

(A) LED Lamps integral type, with PC diffuser suitable

(i) 2 to 3 watts 1 Ea. 69.69

(iii) 10 to 15 watts 4 Ea. 188.87

FAN AND RELEATED ITEM

31 Providing & erecting Approved make Ceiling Fan with double ball bearing 3 Ea. 2358.35

ISI mark with Condenser 230 volt A.C.50 Hz. 1200 mm sweep complete having

4 blades Aluminium body and blade sets having ornamental design shanks,

canopy erected with earthing [ Make shall be approved by Engineer in Charge]

32 Supplying and erecting 19 / 20 mm. nominal bore Medium Class M.S. 2 Mtr. 108.07

Pipe down rod erected duly painted for fan complete with

proper insulation without leakage and earthing.

33 Supplying & erecting fan hook box of 10 mm M.S. round bar bounded 2 Ea. 108.07

to the RCC bars up to 50mm length each side and pierced through a

Gauge M.S. box / Heavy Duty PVC box complete erected concealed in

Ceiling with necessary finishing.

34 Providing 2.5mm.thick laminated acrylic sheet to 2 Ea. 18.18

cover the fan hook or Fan box.

35 Providing & erecting fresh Exhaust air fan 250 mm dia with square 2 Ea 1559.44

frame make of ABS body with louvers, Cat. III

36 Supplying and erecting approved make oscillating type medium 1 Ea. 3518.84

duty bracket fan with Aluminium Blades A.C. 23OV. 50cy/s, with

thermal overload protection wall mounted with height adjustment and

rotary tilting device complete with guard, pull cord for speed and

oscillation flexible Core plug top complete erected with lead wires as

EARTHING SYSTEM

37 Providing and erecting required size HOT deep Galvanised iron 2 Kg. 77.77

strip for earthing of H.T. , OCB/ ACB/ Transformer LT panel board, Motors

etc. using proper

38 Providing and erecting Annealed bare Copper wire 8 2 Kg. 794.87

39 Providing and erecting HOT deep Galvanised iron 5 Kg. 77.77

strip wire 8 to 16 SWG.

40 Supplying & erecting in earthpit of minimum bore dia. 225mm size

approved make Safe Earthing Electrode consisting Pipe-in-Pipe

Technology as per IS 3043- 1987 made of corrosion free hot

dipped G.I.Pipes having Outer pipe dia of 80 mm having 80-200 Micron

galvanising, Inner pipe dia of 40 mm having 200-250 Micron

galvanising, connection terminal dia of 14 mm with constant ohmic

value surrounded by highly conductive compound with high charge

dissipation suitable for following type of applications with

chamber and heavy duty cover.(approved make OEM has to submit test

certificate including value of earth resistane of installation.

[B] For Electrical installation up to 11 KV located in other than normal 1 Ea. 7095.25

soil i.e. Soft Rock, Marshy Soil etc.

-Length of Pipe : 2 mtr

-Back filling Compound :1 no. Bag of 25 Kg. two for body earth and one

for neutral earth

[C] For Electrical Installation covering Transformer Neutrals, 1 Ea. 10593.89

Lightning arrester Earthing, A.C.Plant & Sensitive Computer

System(like Automation, SCADA)i.e. independent Earthing located

in other than normal soil i.e. Soft Rock, Marshy Soil etc..

-Length of Pipe : 3 Mtrs.

-Back filling Compound :2 nos Bags of 25 Kg.

CABLES, WIRE AND TERMINATIONS

41 Making trench in soft soil of suitable width of 90 cm deep for laying cable 1 Mtr. 46.46

or locating the fault all over the run and back filling the same and

making the surface

as normal ground.

42 Providing & laying. R.C.C. Hume pipe for cable to be laid 90 cm. below 1 Mtr. 226.24

ground across the road crossing or on floor with necessary material

in an approved manner and making the ground as per original. (F)

43 Providing & laying approved make Double walled corrugated pipes 10 Mtr. 62.62

(DWC) of polyethylene(conforming to IS 14930 II )with necessary

connecting accessories of same material at required depth in existing

trench for laying of cable. below ground / road surface for enclosing

cable, (A)50 mm outer dia

44 Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable

multistrand / Solid Copper conductor for 1.1 KV. to be laid

on wall with necessary clamps or in existing trench / pipe at road

crossing or floor of following size of cables.

(A) 4 core 2.5 Sq. mm 30.0 Mtr. 269.67

(B) 4 core 4 Sq. mm 30.0 Mtr. 362.59

45 Providing and, fixing heavy duty flange type brass cable gland with

rubber ring for PVC insulated armoured cable complete with out

going tails, insulating tape etc for following size of cables.

(A) 2 to 4 core 2.5 / 4 Sq. mm 4 Ea. 33.33

46 Solder less crimping type Copper lugs conforming to IS suitable for cable

of following size evenly crimped with high pressure tool & connected

to switchgear terminals with brass/cadmium plated nut bolts in an

approved manner.

47 Supplying & erecting approved make LAN cable of following size in 20.0 Mtr 45.45

existing pipe as per direction [C] CAT

WATER COOLER AND PURIFIER

48 Providing and erecting water cooler having storage capacity 80Ltr. & 1 Ea. 41342.33

cooling capacity 40 Ltr.per hour @ an ambient temp of 45˚ C. The outlet

temp. of the water should drop by 15˚ C within a hour, The water

cooler should be comprising of hermetically sealed compressor,

fan motor, condensing unit, water tank surrounded by evaporating coil,

thermostats, relay etc. complete with necessary inlet & outlet connection.

The body of water cooler will be made from Stainless Steel.

49 SITC of Water Purifire Eureka Forbs Make AG 200 or 1 Ea. 11615.00

PUMP SETS AND STARTERS

50 Providing & erecting open well type horizontal mono block pump set 1 Ea. 9613.18

with stainless steel body having following specification

(C) 1 H.P. single phase open well motor pump set suitable for

LPM discharge @ 25 mtr. head, suitable for 32 mm dia. Delivery

pipe with control panel.

51 Supplying and erecting Direct - On - Line Starter with 18 A. rating 1 Ea. 2100.80

contactor and with 3.5 Amp. 18A range directly operated in totally

insulated elegant enclosure for single phase operation up to 3 HP as

per IS 13947 complete erected on P.W. Block with necessary connection Cat-

52 Supplying & erecting approved make Automatic liquid level 1 Ea. 2355.32

controller 6A. with sensor testing as per instruction of Engineer in charge

on site complete with wiring connection with existing wires , with

copper conductor from pump to upper and lower tank.

TOTAL COST OF ELECTRIFICATION WORK

TOTAL OF ANGANWADI

EXECUTIVE ENGINEER

SOUTH WEST ZONE (ATHWA)

SURAT MUNICIPAL CORPORATION

SIGNATURE & SEAL OF CONTRACTOR

NAME & ADDRESS :-