Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹7.4 LAccepted-AOC | L1 | Accepted-AOC L1 | |
| 2 | L2₹8.3 L+₹90,826.37 (12.2%)Rejected-Finance | L2 | Rejected-Finance L2 | |
| 3 | L3₹9.6 L+₹2.2 L (29.6%)Rejected-Finance CONTRACTOR WARD NO 10 DEVINAGAR PAONTA SAHIB DISTRICT SIRMOUR H P | SIRMAUR | HIMACHAL PRADESH | 173001 | L3 | Rejected-Finance L3 | |
| 4 | Rejected-Technical | - | Rejected-Technical Not Qualified | |
| 5 | Rejected-Technical | - | Rejected-Technical Not Qualified |
Tender Value
₹6.0 L
EMD Value
₹12,000
Closing Date
17 Jun 2020, 5:00 pmClosed
Executive Engineer
Executive Engineer HPPWD Paonta Sahib District Sirmour (HP)
A/R and M/O to housing board colony devinagar Paonta Sahib. (SH P/L wood work, repair to plaster, roof treatment, painting and distempering etc. in type-II qtrs No. 61, 67,72, 79, 88, 98 and Type-III qtrs No. 116, 129 and 131)
2020_PWD_37870_4
Tender/2019-20-1150-1200dated 26.05.2020
Open Tender
Civil Works - Buildings
Item Rate
90 days
Paonta Sahib
please refer tender document
11 documents required · 11 mandatory
₹350
Yes
EE Paonta Sahib
₹12,000
Yes
5 Aug 2020
9 Jun 2020
18 Jun 2020
9 Jun 2020
17 Jun 2020
9 Jun 2020
Amount
Dismantling doors, windows and clerestory windows, ventilators etc. (wood or steel) shutters including chowkhats, architraves, hold fasts and other attachements etc. complete and stacking them within all lead Not exceeding 3 sq.m in area ,including carriage of all labour, equipment and materials to various locations through all modes of transportation in all leads,lifts and other incidental charges as per the direction of the Engineer in charge.
Providing wood work in frames of doors, windows, clearestory window and other frames wrought framed and fixed in position complete. Sal wood, including carriage of materials with in all leads,lifts and other incidentals complete as per entire satisfaction of the Engineer-in-charge.
Providing and fixing 40mm( forty millimetres) thick 2nd(second) class deodar wood. Panelled glazed or panelled and glazed shutters for doors windows and clerestory windows. Including black enamelled iron butt hinges with necessary screws.including all leads ,lifts and carriage of material as per entire satisfaction of Engineer in charge.
Providing and fixing flush door shutters decorative type core of block board construction with frames of first class hard wood and well matched first class indian teak plyveneering with vertical grains or cross bends and face vencering on both faces of shutter 35mm thick including black enamelled M.S. butt hinges. including carriage of materials with in all leads,lifts and other incidentals complete as per entire satisfaction of the Engineer-in-charge.
Providing and fixing wire gauge shutters using galvanised M.S. wire gauge of I.S. gauge designation 85 (eighty five) G. with wire of dia 0.56( Fifty six millimetres) for doors windows and clerestorey windows including bright finished black enamelled iron hinges with necessary screws. 2nd( second) class deodar wood. including carriage of all labour, equipment and materials to various locations through all modes of transportation in all leads,lifts and other incidental charges as per the direction of the Engineer in charge.
Providing 40x3 mm flat iron hold fast 40cm. Long including fixing to frame with 10mm diameter bolts & nuts and wooden plugs and embeding in cement concrete block 30x10x15cm. 1:3:6 ( one cement : three sand: six graded stone aggregate twenty millimetres nominal size)including carriage of all labour, equipment and materials to various locations through all modes of transportation in all leads,lifts and other incidental charges as per the direction of the Engineer in charge.
Providing and fixing anodized aluminium sliding door bolt anodized colour and shade with bolts and nuts screws etc.complete 250x16 mm.( two hundred fifty into sixteen millimetres) including all leads ,lifts and carriage of material as per entire satisfaction of Engineer in charge.
Providing and fixing aluminium tower bolts (berrel type) anodized trans parent or dyed to required shade and colour with screws etc. complete 300x10mm ( three hundred into ten millimetres) including carriage of materials with in all leads,lifts and other incidentals complete as per entire satisfaction of the Engineer-in-charge.
Providing and fixing 100 mm ( hundred millimetres) aluminium handles anodized transparent or dyed to required colour & shade with necessary screws etc. complete.including carriage of all labour, equipment and materials to various locations through all modes of transportation in all leads,lifts and other incidental charges as per the direction of the Engineer in charge.
Providing and fixing fly proof galvanised M.S. wire gauge of IS gauge esignation 85 g with wire of dia 0.56 mm to windows and clerestory windows including 60x20 mm beading of.2nd class deodar wood. )including carriage of all labour, equipment and materials to various locations through all modes of transportation in all leads,lifts and other incidental charges as per the direction of the Engineer in charge.
Repairs to plaster in patches of 2.50 ( two decimal fifty)square metres. and under and 10 to 15mm ( ten to fifteen millimetres) thick including cutting the patch in proper shape and replastering the surface of the wall including disposal of rubbish to the dumping ground within a Le ad of 20(twenty ) metres with:- Cement Mortar 1:6 (One Cement : Six Sand) including carriage of all labour, equipment and materials to various locations through all modes of transportation in all leads,lifts and other incidental charges as per the direction of the Engineer in charge.
Providing and laying cement concrete 1:4:8 ( one cement: four sand: eight graded stone aggregate 40mm ( forty millimetres) nominal size) and curing complete excluding cost of form work in Foundation and plinth , including carriage of materials with in all leads,lifts and other incidentals complete as per entire satisfaction of the Engineer-in-charge.
Cement concrete flooring 1:2:4 (One cement :Two sand:Four graded stoneaggregate twenty millimetre nominal size)laid in one layer finished with a floating coat of neat Cement. 40 mm( forty millimetres) thick including carriage of materials with in all leads,lifts and other incidentals complete as per entire satisfaction of the Engineer-in-charge.
providing and fixing glass strips in joints of terrazzo floors. mm wide and 4 mm thick, including carriage of materials with in all leads,lifts and other incidentals complete as per entire satisfaction of the Engineer-in-charge.
Grading roof for water treatment with Cement concrete 1:2:4 (One cement : two sand : four graded stone aggregate twenty millimetre nominal size ) including carriage of materials with in all leads,lifts and other incidentals complete as per entire satisfaction of the Engineer-in-charge.
Applying a priming coat over new wood and wood based surfaces after and including preparing the surface by throughly cleaning oil,grease,dirt and other foreign sand ;papering and knotting with readymixed paint brushing with white lead for priming including carriage of materials with in all leads,lifts and other incidentals complete as per entire satisfaction of the Engineer-in-charge.
Painting two coat( excluding priming coat)on new wood and wood based surfaces with enamel paint to given and even shade including cleaning of all dirt,dust and other foreign matter sand papering and stopping With white enemal paint ncluding carriage of all labour, equipment and materials to various locations through all modes of transportation in all leads,lifts and other incidental charges as per the direction of the Engineer in charge.
Painting two coat (excluding priming coat)on previously painted wood and wood based surfaces with readymixed paint brushing to give an even shade including cleaning of all dirt,dust and other foreign matter sand papering and stopping With Readymixed paint ( white ) including carriage of all labour, equipment and materials to various locations through all modes of transportation in all leads,lifts and other incidental charges as per the direction of the Engineer in charge.
Distempering(one coat) with oil bound washable distemper of approved brand and manufature and of required shade,on decorated wall surfaces to give an even shade,after thoroughly brushing the surface clean of all grease,dirt,loose pieces of scales and also including preparing the surface even and sand papered mooth.including carriage of all labour, equipment and materials to various locations through all modes of transportation in all leads,lifts and other incidental charges as per the direction of the Engineer in charge.
Extra over for every sub sequent coat of distempering with oil bound washable distemper of approved brand and manufacture. .including carriage of all labour, equipment and materials to various locations through all modes of transportation in all leads,lifts and other incidental charges as per the direction of the Engineer in charge.
Finishing wall with water proofing cement paint of approved brand and manufacture and of required shade on decorated wall surfaces (one coat) to give an even shade after thoroughly brushing thesurface to remove all dirt,loose or softened paint. including carriage of all labour, equipment and materials to various locations through all modes of transportation in all leads,lifts and other incidental charges as per the direction of the Engineer in charge.
Extra over for every sub sequent coat of water proofing cement paint of approved brand and manufacture. including carriage of all labour, equipment and materials to various locations through all modes of transportation in all leads,lifts and other incidental charges as per the direction of the Engineer in charge.
Demolition of brick work above G.L. upto floor two level including stacking of serviceable materials and disposal of un-serviceable materials within 20 metres. lead. In cement mortar , including carriage of materials with in all leads,lifts and other incidentals complete as per entire satisfaction of the Engineer-in-charge.
Excavation in foundations, trenches etc., in earth work, all lift and all leads of eacavated soil , clear from the edge of the excavation and then returning the stacked soil in all layers, when required in to plinths sides of foundations etc., consolidating each deposited layer by ramming and watering and then disposing of all surplus excavated earthas directed with in a leads, including carriage of materials with in all leads,lifts and other incidentals complete as per entire satisfaction of the Engineer-in-charge.
Providing and laying cement concrete 1:6:12 (one cement : Six sand : twelve graded stone aggregate forty millimetres nominal size) and curing complete excluding cost of centring and shuttering in Foundation and plinth, including carriage of materials with in all leads,lifts and other incidentals complete as per entire satisfaction of the Engineer-in-charge.
Random rubble masonry/polygonal rubble masonry (uncoursed/brought to courses) with hard stones of approved quality in foundation and plinth including leveling up with cement concrete 1:6:12 (One cement : six sand : twelve graded stone aggregate 20mm nominalsize) at plinth level in Cement Mortar 1:6 (one cement :Six sand), including carriage of materials with in all leads,lifts and other incidentals complete as per entire satisfaction of the Engineer-in-charge.
Brick work using comman burnt clay building bricks in foundation and plinth in cement mortar1:6( 1cement ;6 sand )2nd class bricks , including carriage of materials with in all leads,lifts and other incidentals complete as per entire satisfaction of the Engineer-in-charge.
15mm Cement plaster in single coat on the rough side of brick/ concrete/stone walls for interior plastering upto floor two level including arrises,internal rounded angles,chamfers and/or rounded angles not exceeding 80mm in girth and finished even and smooth.Cement Mortar 1:6 (1Cement:6 Sand), including carriage of materials with in all leads,lifts and other incidentals complete as per entire satisfaction of the Engineer-in-charge.
Providing and fixing stainless steel kitchen sink of approved standard ISI make with drain board and C.P. waste with C.I. or M.S. brackets painted white including cutting holes and making good the same but excluding fitting, including carriage of materials with in all leads,lifts and other incidentals complete as per entire satisfaction of the Engineer-in-charge.
P/F 32 mm ( thirty two ) millimetres CP brass waste for wash basin or sink, including carriage of materials with in all leads,lifts and other incidentals complete as per entire satisfaction of the Engineer-in-charge.
Providing and fixing M.I. Union for wash basin or sink 32 mm ( thirty two )dia including carriage of all labour, equipment and materials to various locations through all modes of transportation in all leads,lifts and other incidental charges as per the direction of the Engineer in charge
Providing and fixing vitreous China wash down,water closet squatting pan (Indian type W.C pan) size 580mm( five hundred eighty) (Earth work, bed concrete, foot rest and trap to be measured and paid for separately). Orisa pattern , including carriage of materials with in all leads,lifts and other incidentals complete as per entire satisfaction of the Engineer-in-charge.
Providing and fixing 100 mm ( one hundred millimetres)size 'P' or 'S' trap for water closet ( squatting pan)including jointing the trap with the pan and soil pipe in cement mortar 1:1(one cement : one sand) Vitreous China , including carriage of materials with in all leads,lifts and other incidentals complete as per entire satisfaction of the Engineer-in-charge.
Providing and fixing automatic flushing cistern with a pair of C.I. Or M.S. brackets complete with fittings including C.I. Syphonic apparatus, mosquito proof lid, C.P. Brass unions and coupling for connections with inlet, outlet and overflow pipes including cutting holes and making good the same (overflow pipe to be measured and paid for separately) :- 5( five litres) litres capacity , including carriage of materials with in all leads,lifts and other incidentals complete as per entire satisfaction of the Engineer-in-charge.
Providing and fixing brass bib tap (Superior or heavy type)15 mm( fifteen millimetres) dia , including carriage of materials with in all leads,lifts and other incidentals complete as per entire satisfaction of the Engineer-in-charge.
Providing and fixing PVC water storage tank of ISI : 12701 marked,G.I. inlet and outlet connection, 15mm( fifteen millimetres) nominal bore ball valve and mosquito proof PVC cover with locking arrangement including hoisting upto all heights above ground level 500( five hundred) litres net capacity tank, including carriage of materials with in all leads,lifts and other incidentals complete as per entire satisfaction of the Engineer-in-charge.
Providing and fixing stainless steel kitchen sink of approved standard ISI make with drain board and C.P. waste with C.I. or M.S. brackets painted white including cutting holes and making good the same but excluding fitting.610 x 510 mm with boul depth 200 mm, including carriage of materials with in all leads,lifts and other incidentals complete as per entire satisfaction of the Engineer-in-charge.
Providing and fixing vitreous China wash down,water closet (European type. W.C. pan) with integral 'P' or 'S' trap including jointing the trap with soil pipe in cement mortar 1:1(one cement : one sand) (Seat and over to be measured and paid for separately) Angle Indian Universal closet, including carriage of materials with in all leads,lifts and other incidentals complete as per entire satisfaction of the Engineer-in-charge.
Providing and fixing PTMT jet spray of approved quality and colour with 1.5 mtr. Tube, including carriage of materials with in all leads,lifts and other incidentals complete as per entire satisfaction of the Engineer-in-charge.
Providing and fixing plastic seat (Solid / Hollow type) and cover for wash down water closet with C.P. Brass hinges and rubber buffers white plastic seat and cover, including carriage of materials with in all leads,lifts and other incidentals complete as per entire satisfaction of the Engineer-in-charge.
Providing and fixing M.S. grills of required patterns in wooden frames of windows etc. with M.S. Flats, square or round bars with round headed bolts and nuts or by screws Plain gril, including carriage of materials with in all leads,lifts and other incidentals complete as per entire satisfaction of the Engineer-in-charge.
White glazed tiles 6 mm thick in skirting risers of steps and dado 12 mm( twelve millimetres) thick cement mortar 1:3 (1 cement :3 sand) and jointed with cement slurry, including carriage of materials with in all leads,lifts and other incidentals complete as per entire satisfaction of the Engineer-in-charge.
Providing and laying granite stone in flooring 20mm ( twenty millimetres) (average) thickness base of cement mortar 1:3(1cement: 3 sand) laid over and jointed with grey cement slurry mixed with pigment to match the shade of granite stone i/c rubbing and polishing complete. 20mm ( twenty millimetres).thick, including carriage of materials with in all leads,lifts and other incidentals complete as per entire satisfaction of the Engineer-in-charge.
Randhir Singh
DINESH KUMAR GUPTA
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .