PHC Maintenance

Amount

building

od1428459/2021_2022 : Providing and laying 60 mm thick factory made cement concrete interlocking paver block of M - 30<br>grade made by block making machine with strong vibratory compaction, of approved size, design<br>& shape, laid in required colour and pattern over and including 50 mm thick compacted bed of<br>stone aggregate, etc. all complete as per the direction of Engineer-in-charge. OD 80/21-22

10.16.1 : Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.Hot finished welded type tubes

13.61.1 : Painting with synthetic enamel paint of approved brand and manufacture to give an even shade:Two or more coats on new work

od1428460/2021_2022 : Providing and fixing Aluminium profile sheets (size, shape and pitch of corrugation as approved by<br>Engineer-in-charge) 0.460 mm or nearest available thickness. The sheet shall be fixed using self<br>drilling/self tapping screws of size (5.5x55mm) with EPDM seal, complete upto any pitch in<br>horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and<br>including cutting to size and shape wherever required. OD71/21-22 (Approved data vide CE<br>circular dated 18.08.2016)

od1428597/2021_2022 : Designing, fabricating,testing and installing Curtain Wall with Aluminium Composite Panel<br>Cladding, with open grooves for linear as well as curvilinear portions of the building , for all heights<br>and all levels etc. including:<br>Providing, fabricating and supplying and fixing panels of aluminium composite panel cladding<br>INCLUDING aluminium base frame work in pan shape in metalic colour of approved shades made<br>out of 4mm thick aluminium composite panel material consisting of 3mm thick FR grade mineral<br>core sandwiched between two Alumini um sheets (each0.5mm thick). The aluminium composite<br>panel cladding sheet shall be coil coated, with Kynar 500based PVDF / Lumiflon based<br>fluoropolymer resin coating of approved colour and shade on face # 1 and polymer (Service)<br>coating on face # 2 as specified using stainless steel screws, nuts, bolts, washers, cleats, weather<br>silicone sealant, backer rods etc.with aluminium composite panel cladding till the handing over of<br>the building for occupation. The Contractor shall provide curtain wall with aluminium composite<br>panel cladding, having all the performance characteristics all complete, as per the Architectural<br>drawings, as per item description, as specified, as per theapproved shop drawings and as<br>directed by the Engineer-in-Charge.However, for the purpose of payment, only the actual area on<br>the external face of the curtain wall with Aluminum Composite Panel Cladding (including width of<br>groove) shall be measured in sqm. up to two decimal places.<br>OD84/21-22 - Modified data 25.7

od1430209/2021_2022 : Supply and fixing 3D Acrylic letters ENGLISH LETTERS 25-30cm or MALAYALAM LETTERS 20-<br>25cm for name board etc complete as per direction of Engineer incharge at site OD 50/21-22

15.7.1 : Demolishing brick work manually / by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-Charge.In mud mortar

2.6.1 : Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including disposal of excavated earth, lead up to 50 m and lift up to 1.5 m, disposed earth to be levelled and neatly dressed.All kinds of soil

60.7.1 : DRY RUBBLE MASONRY _ Dry rubble without concrete levelling course masonry with good quality blasted rubble including packing to compactness to lines and levels cost and conveyance of all materials labour charges etc. complete as per direction of Departmental officers at site

4.1.8 : Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 nominal size)

4.1.6 : Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:3:6 ( 1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size)

4.1.3 : Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)

5.1.2 : Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level:1:1:5:3 (1 cement 1.5 coarse sand :3 graded stone aggregate 20 mm nominal size

15.3 : Demolishing R.C.C. work manually / by mechanical means including stacking of steel bars and disposal of unserviceable material with in 50 metres lead as per direction of Engineer -in-Charge.

5.3 : Reinforced cement concrete work in beams, suspended floors, roofs, having slope up to 15⁰ landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases up to floor five level excluding the cost of centering, shuttering, finishing and reinforcement, with1:1.5:3 (1 cement : 1.5 coarse sand (Zone III) : 3 graded stone aggregate 20 mm nominal size).

5.9.3 : Centering and shuttering including strutting, etc. and removal of form for:Suspended floors, roofs, landings, balconies and access platform

5.9.5 : Centering and shuttering including strutting, etc. and removal of form for:Lintels, beams, plinth beams, girders bressumers and cantilevers

5.22.6 : Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth levelThermo - Mechanically Treated bars of grade Fe-500D or more

ASHARAF C M

ABDUL RASHEED A I

Bidder Name

SHAJI V K

ABDUL RASHEED A I

ASHARAF C M