Renovation of assembly area and special repair to campus road of KV No 1 Ambala Cantt under GE North Ambala Cantt

Amount

SCHEDULE A PART I (B/R WORKS)

Excavating in trenches, not exceeding 1.50 metre wide and not exceeding 1.50m in depth for foundation etc. or for shafts, wells, cesspits, manholes, pier holes etc. not exceeding 10 sq.m on plan and not exceeding 1.50m in depth and getting out in soft/loose soil complete, all as specified and as directed.

Excavation over areas not exceeding 1.50 metre deep and getting out in soft/loose soil complete all as specified and as directed.

Returning filling in including spreding leveling watering and well ramming in layers not exc 25 cm each in soft/loose soil complete, all as specified and as directed.

Removing excavated materials to a distance not exc 50 m and depositing where directed at level not exc 1.50 above the starting points complete, all as specified and as directed.

Removing excavated soil to a distance exceeding 1.5 Kilometre and not exceeding 5.00 Kilometre and deposited where directed complete all as specified and directed.

Demolition of cement concrete in ground floor and pavings not exceeding 15cm thickness (below or above ground level) and removal the rubbish/ demolished material outside defence land, complete all as specified and directed.

Dismantling of brickwork, laid dry as in floors and removal the rubbish/ demolished material outside defence land, complete all as specified and directed.

Material and labour for broken stone hard core of gauge n.exc 63mm, deposited, spread and levelled in layers n.exc 15 cm thick, watered and rammed to a true surface complete all as specified and as directed .

Material and labour for providing reinforced cement concrete 1:2:4 type B1 (using 20mm graded mechanically crushed stone aggregate) as in chajjas, shelves and the like complete all as specified and directed.

Material and labour for plain cement concrete 1:4:8 type D-2 (using 40 mm graded mechanically crushed stone aggregate), as in foundation filling and mass concrete, complete, all as specified and as directed.

Material and Labour for mild steel TMT bars of 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, complete, all as specified and as directed.

Form work to chajjas, toughs and similar items including edges for rough finished concrete surface complete all as specified and directed..

Form work to edges of concrete flats, treads, concrete railings, floor ,roof and similar work exceeding 50mm but not exceeding 100mm thick for rough finished surfaces of concrete complete all as specified and directed..

Taking down chowkats or frames with shutter area not exceeding 1.50 Square metre (w/o taking off shutters from frames) and removing from site, including cutting holes for taking out existing hold fasts and making good the disturbed portion of jambs and adjoining surfaces to match with existing finish , complete, all as specified and as directed.

Taking down chowkats or frames with shutter area exceeding 1.50 Square metre and not exceeding 4.00 Square metre and removing from site, including cutting holes for taking out existing hold fasts and making good the disturbed portion of jambs and adjoining surfaces to match with existing finish, complete, all as specified and as directed.

Supply and fixing of solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing complete all as specified and directed.

Supply and fixing factory made 28 mm thick PVC moulded door shutter as in kitchen cabinet with particle board core, with 2mm thick moulded pre laminated PVC sheet on the front face and 2mm plain colour PVC sheet on back face, 5 mm x 25 mm PVC sheet beading on either side including two Nos. aluminium hinges for each door complete all as per manufacturer instructions complete all as specified and directed.

Material and labour for 18-20mm thick granite (of any type) , table rubbed & polished, and moulded as in steps, jambs, pillar, counter WHB, floor, etc over and including 10mm thick in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite and jointed with grey cement slurry incl rounding of front edge with and including taking down the existing slab, complete, all as specified and as directed by the Engineer-in-Charge.

Supply and fixing steel window box type using ERW hollow 'P' section comprising double frame for and including gauged and glazed Skelton shutter 30mm thick, jointed internally with flat iron 40x3mm complete including hinges, handle, tower bolts, stops, lugs etc. all as shown on CECZ Chandigarh drawing No.. TD-219(c) sheet 1/3 to 3/3 and TD-220(c) sheet 1/3 to 3/3 as applicable complete, all as specified and as directed. Note: (i) For the purpose of measurement and payment double shutter with frame shall be considered as one unit. (ii) Unit rate quoted against this item shall also include the iron mongery and grill 10 mm square bar irrespective of whatever shown on drawing. (iii) Glazing, wire mesh and painting shall be measured and paid for separately.

Supply and fixing 250 mm stainless steel sliding door bolt, hasp, staple (bolt type) , bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple, complete, all as specified and as directed.

Supply and fixing stainless steel butt hinge of 100mm length, suitable for PVC door shutters complete, all as specified and as directed.

Supply and fixing stainless steel handle,150mm long, complete, all as specified and as directed.

Supply and fixing stainless steel tower bolt, 200mm long, complete, all as specified and as directed.

Supplying & Fixing for galvanized mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks or galvanized wire staples, complete, all as specified and as directed by the Engineer-in-Charge.

Material and Labour for vibratory compacted, precast cement concrete coloured (using coloured pigment) red coloured , rubber moulded, interlocking designer paver blocks( double glossy) of any shape and size, confirming to IS-15658-2006 of 80mm thickness, M-40 grade in path, hard standing, etc. laid over and including 50 mm thick bedding layer of coarse sand complete, all as specified and as directed.

Material and labour for machine cut kota stone slab 18-22 mm thick (of size not less than (55 cm x 55 cm) laid in flooring and jointed & pointed with grey cement slurry mixed with pigment to match shade of the slab including cutting waste, rubbing and polishing (Granite finish) over and including cement screed bed 20mm thick in cement mortar (1:4) base , complete all as specified and as directed.

Material and Labour for dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish/ demolished material outside defence land, complete all as specified and as directed.

Material and labour for premium quality, joint free, non skid coloured porcelain tiles (Square/rectangular) , area of each tiles exceeding 0.18 sqm and not exceeding 0.36 sqm and 7 to 8 mm thick as in floor, set and jointed in neat cement slurry @ 3.00 kg/Sqm and pointed in white or coloured cement to match the surface over and including cement screed bed 15mm thick in cement mortar (1:4) , complete all as specified and as directed.

Material and labour for premium quality, glazed coloured ceramic tiles of size 300 x 450 mm 7 to 8 mm thick on vertical surfaces of walls over and including 10mm thick rough finished plaster in cement mortar (1:3) set jointed in neat cement slurry and pointed in coloured cement to match, complete, all as specified and directed.

Taking up or down steel tubing and connections for 15mm dia including cleaning for refixing or removal to store complete all as specified and as directed.

Taking up or down steel tubing and connections for 20mm dia including cleaning for refixing or removal to store complete all as specified and as directed.

Taking up or down steel tubing and connections for 32mm dia including cleaning for refixing or removal to store complete all as specified and as directed.

Supply and fixing of 15mm dia tubes, medium grade, galvanized, with all fittings such as sockets, bends, elbows, tees etc, concealed/surface fixed to walls and ceiling or laid in floors, including cutting existing steel tubing & screwing, if required for alterations and additions, complete all as specified and directed.

Supply & fixing of 20 mm dia tubes, medium grade, galvanized, with all fittings such as sockets, bends, elbows, tees etc, concealed/surface fixed to walls and ceiling or laid in floors, including cutting existing steel tubing & screwing, if required for alterations and additions, complete all as specified and directed.

Supply and fixing in repairs of virgin polypropylene cistern, 10 litre capacity, ISI marked, coloured, low level complete with PVC bend/flush pipe and making all connections including taking down existing high or low level unserviceable flushing cistern and making good the disturbed surface to match with the existing surface complete all as specified and directed. Make-Essco Cat Part No WHE WHT-183T or equivalent model in makes mentioned in Appendix 'B' of tender document .

Supply and fixing in repair, angle cock, 15mm dia, cast copper alloy, chromium plated, ISI marked, screwed down, high pressure with capstain head with long shank, heavy duty, screwed both ends for iron pipes or for unions complete all as specified and as directed. Make-Jaquar Cat Part No LYR 38053- or equivalent model in makes mentioned in Appendix 'B' of tender document . Note: Contractor shall submit a guarantee certificate from manufacturer to Engineer-in-Charge before claiming payment.

Supply and fixing in repair, push cock, 15mm bore, screwed one ends to iron pipes or for unions complete all as specified and as directed.

Supply and fixing in repair, bib tap, screwed down, high pressure, cast copper alloy, fancy type, chromium plated, ISI marked, with capstan heads, screwed down suitable for 15mm bore pipe or union complete all as specified and directed. Make-Jaquar Cat Part No LYR 38037- or equivalent model in makes mentioned in Appendix 'B' of tender document . Note- Contractor shall submit a guarantee certificate from manufacturer to Engineer-in-Charge before claiming payment.

Supply and fixing in repair,15mm bore pillar tap, chromium plated, cast copper alloy with capstan head, screwed down, high pressure, with or without lettered ‘Hot’ or ‘Cold’ complete all as specified and directed. Make-Jaquar Cat Part No LYR 38011- or equivalent model in makes mentioned in Appendix 'B' of tender document . Note- Contractor shall submit a guarantee certificate from manufacturer to Engineer-in-Charge before claiming payment.

Supply and fixing of PVC connections, 450 mm long and 15mm dia with PTMT nuts and PVC washers on both ends complete all as specified and directed.

Supply and fixing in repairs, vitreous china coloured squatting pan of orissa pattern, size 580mmx440mm, white (Ist quality) with ‘P’ or ’S’ trap, with front or back inlet and integral foot rests of any pattern (excluding flushing cistern and flush pipe) including connection to trap and to flushing pipe, anti syphonage pipe etc including making good to existing floor surface and connection to flush pipe etc. complete all as specified and directed. Make-Jaquar Cat Part No CNS-WHT-OP01- or WHT-WCN1 equivalent model in makes mentioned in Appendix 'B' of tender document .

Supply and fixing in repairs, vitreous china wash down water closet, pedestal pattern (EWC) of size 390x365x540mm, white (Ist quality), with 'P' or 'S' trap, with PVC water closet seat, white, closed pattern, with flat bottom and cover and mild steel chromium plated or aluminised hinging device and connecting to existing/new low level flushing cisterns, existing/new flush pipe and drain (or out going pipe) and fixing in position complete all as specified and directed Make-Jaquar Cat Part No CNS-WHT-10 And - or equivalent model in makes mentioned in Appendix 'B' of tender document .

Supply and fixing in repair, vitreous china urinal with top inlet of size 615x350x330mm complete including providing and fixing plugs, bedding urinal against wall in CM 1:2 securing urinal to plugs with and including 60 mm brass screws, pointing around urinal back in cement, CP waste coupling,CP urinal spreader, etc. complete all as specified and directed. Make-Jaquar Cat Part No URS-WHT-0705 And - or equivalent model in makes mentioned in Appendix 'B' of tender document .

Supply and fixing in repair, vitreous china, TOP wash hand basin, oval shape back, of size 600x425x195mm including suitable size PVC waste pipe, PVC connections and chromium plated waste coupling, etc., complete all as specified and as directed. Make-Jaquar Cat Part No URS-WHT-0705 And - or equivalent model in makes mentioned in Appendix 'B' of tender document .

Dismantling of cast iron or reinforced concrete drain pipes of any dia, set in cement mortar including taking out of trenches, if required complete, all as specified and as directed.

Supply and fixed Cast iron floor trap 75mm dia of outlet with grating, including jointing to waste pipe fixed in cement concrete type B1 (1:2:4) complete , all as specified and as directed

Supplying and Fixing for cast iron soil, waste and vent spun pipes 75 mm bore, ISI marked, in any length, with or without ears, with cement joints, laid in trenches or in floor complete, all as specified and as directed.

Supplying and fixing for 100mm bore branch pieces, double (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches, complete, all as specified and as directed .

Supplying & Fixing for cast iron soil, waste and vent spun pipes 100 mm bore, ISI marked, in any length, with or without ears, with cement joints, laid in trenches or in floor complete, all as specified and as directed

Supply and fixing cast iron bends (any radius) 100 mm dia diminishing pieces or tapers complete all as specified and as directed.

Material and Labour for PVC (SWR) gully trap 125/110mm, setting and jointing with solvent cement complete, all as specified and as directed.

Supplying & Fixing for cast iron vent cowls suitable for 100mm bore pipe complete, all as specified and as directed.

Supply and fixing chromium plated soap dish with fitting complete all as specifiedand directed. Make- PRIMA Cat Part No: PDX4501-C or equivalent make as per App 'B'of tender document.

Material and labour for cleaning of sewage line upto and including first manhole, blockage of WC, bathroom, floor trap, kitchen pipe, etc, complete, all as specified and as directed.

Cutting into existing manholes for connecting new drains, and making good to pipe and rendering cutting out existing benching for and forming branch channel( 1/2 round or 3/4 section ) in cement concrete 1:2:4 type B-1 (using 20mm size crushed stone aggregate) smooth finished and reforming benching as required of pipe 100 mm dia, complete all as specified.

Material and labour for cement concrete 1:3:6 type C2 using 40 mm graded aggregate in bed to drain pipes including packing under, and haunching in against the side of pipes after they are laid and tested for 100mm dia bore pipe complete all as specified.

Material and Labour for taking down cement or cement lime plaster of any description on brick or stone walls etc including raking out joints hacking for key scrubbing down with water etc, complete, all as specified and as directed.

Material and labour for 15mm thick rendering in cement mortar (1:6) on surface of any description of brick or concrete and finished the surface even and smooth without using extra cement complete, all as specified and as directed.

Material and Labour for 15mm thick rendering on surface of any description of brick work, concrete surfaces in cement mortar 1:4 mixed with and including WPC @2% by weight of cement or as per manufacturer’s instructions, finished even and fair, complete, all as specified and as directed.

Material and labour for rendering, 10mm thick, in cement mortar 1:3, on concrete surface/ceiling finished even and smooth without using extra cement complete all as specified and as directed.

Material and labour for preparation of new plastered surfaces of ceiling and applying two coats of acrylic emulsion with hand roller, over a coat of 2-3mm thick wall care putty , complete all as specified and as directed.

Material and labour for preparation of new plastered surfaces of walls and applying two coats of acrylic emulsion with hand roller, over a coat of 2-3mm thick wall care putty , complete all as specified and as directed.

Material and labour for prepration of newly plastered surface of wall and applying two coats of weather shield Acrylic exterior paint over a coat of primer over complete, all as specified and as directed.

Material and labour for two coats of synthetic enamel paint on steel surfaces over a coat of red oxide primer including preparation of new steel/pre primed surfaces of any description not otherwise described over 10 cm width or girth, complete, all as specified and as directed.

Supply and fixing, sheet glass 3mm thick, ordinary quality , in square not exceeding 0.5 Square metre each pane and glazing with oil putty to steel window and with wooden beads to wooden shutters, complete, all as specified and as directed.

Material and labour for preparation of new road surface and applying 2mm thick retro-reflective thermo plastic road marking paint with glass beads exceeding 10 cm width or girth, hot applied on road surface mechanically conforming to BS-6068 and according to the specification laid down by IRC and MOST (Ministry of surface transport) specification 803 Vol -III.

SCHEDULE A PART II (INTERNAL ELECTRIFICATION)

Taking down carefully copper/aluminum point wiring light/fan/sockets out let/power point complete (fittings such as switches, sockets, ceiling rose, pendent holders, light fittings etc.) and/or drawing out from existing conduit/batten and making good disturbed surface of walls/floors/ceiling, complete, all as specified and as directed.

Material and labour for concealed point wiring using approved colour coding as per IS, with multi stranded copper conductor 1.5 sqmm (Nominal area) single core flame HFFR/ZHFR(Zero Halogen Fire Retardant),PVC insulated and unsheathed stranded cable 1100 volts grade ISI-694 marked TEC and FIA approved in and including non metallic, heavy duty PVC concealed conduit not less than 20mm dia and its fittings including all tees, bell mouth pieces and fixing accessories such as couplers, saddlers, pipe hooks etc, PVC junction boxes ISI marked with GI flush box , inner and outer plate as required for housing modular switch and socket as per module including HFFR/ZHFR(Zero Halogen Fire Retardant),,PVC insulated and unsheathed, copper conductor 1:5 Sqmm nominal cross sectional area wire as earth continuity conductor upto common earth and connecting to common earth dolly for one light/fan point controlled by one switch. complete, all as specified and directed. Note :- Modular Switch, socket and fan regulators to be measured and paid separately) . PVC Conduit confirming to IS 9537 part I & III Note (All chases will be cut by chase cutter only)

Description all as per Srl item No.2.02 here in before but for socket outlet point 5 Amp on same board complete, all as specified and directed.

Description all as per Srl item No.2.02 here in before but for socket outlet point 5 Amp on Independent board complete, all as specified and directed.

All as per the description of Serial Item No 2.02 above, but with 2.50 Sq mm un-sheathed multistranded cable for one socket outlet 15 Amps independent including continuous copper earth wire, PVC insulated of 2.50 Sq mm size, complete, all as specified and directed.

All as per the description of Serial Item No 2.02 above, but with 4.00 Sq mm un-sheathed multistranded cable for one socket outlet 15 Amps independent including continuous copper earth wire, PVC insulated of 4.00 Sq mm size, complete, all as specified and directed.

Supply and fixing of switch, modular, one way, 6 Amps, one module, 230 volt, ISI marked complete all as specified and as directed. Make: Legrand (Arteor), Schenider (Zencelo), Hager (Insista)

Supply and fixing of switch, modular, one way, 16 Amps, one module, 230 volt, ISI marked complete all as specified and as directed. Make: Legrand (Arteor), Schenider (Zencelo), Hager (Insista)

Supply and fixing of socket, modular, 2/3 pin, 5 Amps, 2 module, ISI marked complete all as specified and as directed. Make: Legrand (Arteor), Schenider (Zencelo), Hager (Insista)

Supply and fixing of socket, modular, 2/3 pin, 6/16 Amps, combined, 2 module, ISI marked complete all as specified and as directed. Make: Legrand (Arteor), Schenider (Zencelo), Hager (Insista)

Supply and fixing of electronic fan regulator, modular, 120 watt , 2 module, ISI marked, suitable for ceiling fan, any type/make/sweep complete all as specified and as directed. Make: Legrand (Arteor), Schenider (Zencelo), Hager (Insista)

Supply and fixing ceiling rose surface bakelite 65x50mm, 3 terminal complete, all as specified and directed.

Supply and fixing lamp holder, PVC/polycarbonate type with back plate suitable for angular batten fittings with one block of size 75mm x 75mm for mounting fitting including LED bulb, 12 watt retrofit type, ISI marked ,complete, all as specified and directed. Make Lamp holder:- Anchor/Fine/SSK

Supplying and fixing LED mirror light fitting 09 Watt with lamp, high output PMMA diffuser for glare free light, complete with all accessories internally prewired and connecting up with core twisted flexible copper conductor cable with suitable size, complete, all as directed. Make- Havells Ct Pt No- LUMILINEBS9WLED830SPCWH or Wipro Cat Part No. - LL20-111-XXX-65-NE, Philips Cat No: BN 021 LED10S-6500 PSU GR S1

Supply and fixing exhaust fan AC single phase 230/240 volt of size 250 mm, single phase, 900/950 RPM sweep plastic body with louver and connecting with twin twisted copper conductor flexible of size 0.50 sqmm including cutting of existing wall and making opening in the existing wall for fixing exhaust fan, fixing nut bolts necessary for fixing exhaust fan and testing complete all as directed. Make- Havells model No Ventil Air DX or equivalent in Bajaj / Usha.

Supply and fixing of batten tube light channel suitable for LED tube, single wall/ceiling mounted with all accessories internally prewired and including LED tube light 18 watt lamp, with aluminium heat shrink, high frequency, power factor of 0.90, suitable for connecting up with twin core copper conductor cable of size 23/0.0076 from ceiling rose to connector of the light fitting complete all as specified and as directed. Make- Havells Cat No.(Fitting) REGAL BATEN T8 4TPO 1x22WSSBSWH (for Tube) - CRYSTAL 1213 T8DSTL 20WLED865SGLASS or WIPRO Cat Part No (for fitting) - W10921208 (for Tube) - LC13181 or PHILIPS Cat Part No (for fitting) - TMC501 1xT-LED 22W P3241 (for Tube) - 20W865 T8 INDI -2100Lm for Tube.

Supply and fixing of MCB, single pole, 240 volts, 50Hz, breaking capacity 10KA, 'B' curve, 6 to 32 Amps, ISI marked complete all as specified and as directed. Note: Thimble/lugs of ratings of MCB should be used with wire for fixing in the MCB. Make: Siemens/Schenider Acti 9/Hager Nevello Plus/Legrand/ Indo Asian (Optipro)

Supply and fixing of RCBO, 40 Amps, 230 volts, conforming to IS-12640-2 with IP 20 protection, ISI marked, with earthfault indicator, short circuit and sensitivity, 100mA (HI immunity) complete all as specified and directed. Make- Legrand/Schenider/Hager

Supply , insatallation, testing of SPN distibution board 08 way,double door , IP 43 , as per IS 8623 including 200 amps fully insulated copper bus bar, insulated neutral bar, earth bar, door earthing, reversible doors, PAN assembly for easy installation and also incoming and outgoing connections with suitable size of lugs/thimbles, concealed on the wall surface and making good the disturbed portion with adjoining surfaces to match with existing finish, complete, all as specified and as directed. Make: Schenider/Hager/Legrand

Taking out old earthing complete and taking out old unserviceable earthing material and provision of new earthing complete with galvanised earth plate electrode 600mm x 600mmx 6mm thick surrounded by charcoal and salt, buried directly in ground vertically in a pit of depth not less than 2.25m below ground level with top edge of the earth plate not less than 1.5m below normal ground level, connected to 4.00 mm wire earth lead by means of bolts, nuts, checks nut and washers made out of galvanized iron or steel, earth wire protected by galvanized steel pipe 15mm dia (light grade) and connected to main switch or main control board all as shown in electrical plate No.3 of SSR Part-I & including necessary excavation and earth work. The rate also include charcoal & salt in alternate layers, 20mm dia GI pipe (light grade) for watering, protection pipe, funnel, wire mesh, RCC cover etc. complete, all as specified or indicated including testing on completion. Note : The rates for earth work, GI protection pipe, funnel, wire wesh, RCC cover, etc shall be deemed to be including in quoted rates. RCC cover shall be 50mm thick in 1:2:4 type B-1 using 8mm bars @10cm c/c both way.

Note:- Amount of credit of Rs. 86,944.00 for retrieved materials is mentioned in Schedule of Credit Page No. 101R of tender documents in pdf form which will be deducted offline while acceptance of tender.

Swami Enterprises

S M BUILDERS