SPECIAL REPAIR TO BLDG NO NP-157 (OTM ACCN) OF 611 EME BN AT AHMEDABAD CANTT

Amount

Taking down chowkats or frame with shutters (without taking off shutters from the frame) n exc 1.5 sqm each

Taking down chowkats or frame with shutters (without taking off shutters from the frame) exc 1.5 sqm and n exc 4.0 Sqm each

Taking down Shutters of any description exc 1 sq. m and n exc 2 sq. m each

Dismantling timber scantling 40 Sqcm and over in section in any position in unframed work as in rafters, purlins etc,.

Dismantling timber scantling 40Sqcm and over in section in any position in framed work as in truss etc complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises

Demolition of Brick work or stone/boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars etc., but excluding ashlar facings, dressed stonework and precast concrete articles

M&L for brick work with sub class 'B' bricks built in CM (1:4) straight or curved on plan to any radius in half brick thick walls with old size bricks.

M&L for Brick work with sub class 'B' bricks built in CM (1:6) straight or curved on plan & exc 6m mean radius with old size bricks.

S/F coloured plain/printed glazed tiles of size 300 x 450 x 7 mm, on vertical surfaces such as skirting, dado etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match, including 10 mm thick rendering in CM 1:4

S/F Non skid coloured plain/printed glazed tiles of size 300 x 300 x 7 mm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match.

Dismantling asbestos cement (corrugated or semi corrugate, etc.,) sheets in roof covering complete all as specified

S&F prepainted galvanized aluminium zinc coating GI base corrugated steel sheet 0.60mm thick of any colour as directed by GE having tensile strength of 550MPa as in roof covring/clading to wall, fixed with self tapping screws as specified. Complete all as spd and directed (Note: Corrugation shape of sheet shall be approved by GE)

S&F prepainted galvanized aluminium zinc coating GI base plain sheeting steel sheet 0.60mm thick of colour as directed by GE for ridge having tensile strength of 550MPa as as in roof covring/clading to wall, fixed with self tapping screws as specified. Complete all as spd and directed (Note: Corrugation shape of sheet shall be approved by GE).

S&F 0.56mm thick plain aluminium sheeting, Alloy 31000H4 in ridges, hips, valley gutter, drip and straight flashing (length and girth as fixed)

Taking down cement or lime plaster of any description from stone or brick walls etc., including raking out joints, hacking for key scrubbing down with water and disposing off the rubbish complete all as specified and directed

M&L for 15mm thick rendering on fair faces of brick/concrete surfaces in CM (1:4) finished even and smooth without using extra cement mixed with water proofing compound (Note :- Supply only WPC will be measured & paid separately)

Supply only integral water proofing compound.

M&L for 15mm thick rendering on surfaces other than fair faces of brick/concrete surfaces in CM (1:6) and finished even and smooth without using extra cement

Dismantling wall and ceiling boards (fibre, pulp, insulation, etc.,) or insulation boards/slabs/blankets, any thickness, including cover fillets

S&F Tee grid suspension system of size 600 mm x 600 mm type-1 made out of roll framed hot dipped galvanised steel zince coated of not less than 120 gm/Sqm, main runner 0.3 mm thick of section 24 mm x 33 mm crross runner 0.30 mm thick of section 24 mm x 25 mm, wall angle shall be 0.63 mm thick of section 24 mm x 24 mm grid shall be suspended by 4 mm dia adjustable quick fit hanger rod, system exposed portion shall be pre painted polyester coated in off whitee/white in colour complete with material, fixing, jointing etc., with Coloured textured designer ceiling board (Everest) 4mm thick of size 595 x 595 mm fixing with screws/clips complete all as per manufacturers instructions and direction. (Make : METROC or METACIL or any other equivalent as approved by GE)

Supply & fix rolled mild steel in joist, angle ,channel as in purlins, rafters cleats etc conforming to Fe-410- W (Gde-E-250)quality A, all as directed.

Dismantling and Refixing of mild rolled steel straps in joist, angle ,channel as in purlins, rafters cleats , ceiling frame etc conforming to fe410 w all as directed by Engr-in-Charge.

S&F for Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) conforming to Fe-410-W(Gde-E-250)quality-B including distance pieces, cleats etc, all as directed.

S&F in reapairStainless steel wire cloth 0.36mm normal dia of wire and average width of aparture 1.40mm and fixed with tinned tacks or Stainless steel wire stapples complete all as specified and directed.

S/F factory made fly proof mesh panel pvc door shutter 30 mm thick (Style) consisting of frame made out of M.S. frame shall be covered with heat moulded wood grain printed PVC 'C' chanel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and wood grain printed PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail, all as per specification & drawing and SS wire gauzed i.e. panel will be of SS wire gauze in lieu of PVC sheet panel. The wire gauze shall be wrapped on an additional square 8mm M.S. Solid tube and this tube shall be screwed to M.S. tubes. The wire gauge shall be stretched to tighten firmly, all as directed by Engr-in-charge.

S&F factory made solid panel PVC door shutter 30mm thick (Style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles & both side prelam PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail ; panelling of both side prelam PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading & jointed together with solvent cement, supply & fixing in the frame at site as per SSR specifications & diagram/product drawing shown on sl page NO 146 of SSR Part II with the size of door shutter as required & directed by the Engr-in-Charge.

S&F solid PVC door frame of size 50mmX47mm made out of 5mm single side prelam PVC sheet used instead of Plain colour PVC sheet & edges will be painted to match with prelam sheet reinforced with M.S. Square tube, suppling & fixing in opening all as per specifications and drawing shown on sl page No 150 of SSR part II (for item-884)

S & F 30mm thick, flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and as directed by the Engineer-in-Charge

S&F for Butt hinges of size 100mm, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21.

S&F for butt hinges 100mm size medium weight stainless steel .

S&F 200mm long Aluminium anodised, barrel tower bolts of extruded section and fixed

S&F300mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed

S&F Extruded aluminium alloy handles, fabricated type, anodised of size 150mm.

Hacking out old broken glass (any thickness, size, quality or description) from wooden or metal frame including punching or drilling out old glazing pins/spring clips complete all as specified and directed.

Figured glass, 3mm thick pin head type and glazing with oil putty in squares n exc 0.5 sq. m in each pane

S&F in repair 100mm, Double action spring hinges, mild steel with steel wire spring, stove enamelled, black complete

S&F in repairs for powder coated decorative/fancy type curtain rails of 20mm dia, fixed in brackets, stops etc all as directed

S&F in repairs for powder coated decorative/fancy type curtain rails brackets, stops etc all as directed

S&F , 18mm thick PVC sheet one side prelaminated of approved texture as in cabinet ( with shelves and partitions ) including required beading and necessary fittings and fixtures as per manufacturers instructions complete all as specified and directed by Engr-in-Charge.

S&F telescopic (Hattich) channel for drawer fixed with steel screws all as specified and directed

S&F100mm extruded brass handle fabricated type polished complete all as specified and directed by Engineer in Charge

S&F aluminium anodised ventilator with fixed aluminium frame of size 65 x 40 x 1.98mm thick fixed in vertical position with aluminium vertical members and half portion to be provided with 4mm thick pin head glass and remaining portion to be louvered using 4mm thick pin head glass and louvered portion covered with stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40mm incl necessary channel frame work, including rubber gasket and aluminium beading complete all as specified.

M&L for preparation of old painted steel surface of any description over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed

M&L for preparation of new steel surfaces exc 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified

M&L for preparation of plasterd wall new surfaces and applying two coats of oil bound distemper over one coat of 2mm thick wall care putty all as specified

M&L for preparation of newly plastered wall surfaces and applying two coats of cement base paint over one coat of primer all as specified

M&L for complete removal of existing treatment and applying two coats of cement based paint over one coat of primer all as specified and as directed

M&L for complete removal of existing treatment and applying two coat of oil bound distemper over 2mm thick wall care putty all as specified

M&L for taking up or down steel tubing of 15mm bore and connections, including cleaning for re- fixing or removal to store

M&L for taking up or down steel tubing of 20mm bore and connections, including cleaning for re- fixing or removal to store

M&L for taking up or down steel tubing of 25mm bore and connections, including cleaning for re- fixing or removal to store

S&F for GI pipes of 15mm bore, 'medium grade' , with all fitting and fixed complete to walls and ceilings or laid in floors as all directed.

S&F for GI pipes of 20mm bore, 'medium grade' , with all fitting and fixed complete to walls and ceilings or laid in floors as all directed.

S&F for GI pipes of 25mm bore, 'medium grade' , with all fitting and fixed complete to walls and ceilings or laid in floors as all directed.

S&F in repairs 15mm dia Bib taps, with Chromiun plated crutch or butterfly handle screwed down,for iron pipe or brass ferule complete all as specified and directed.

S&F in repairs 15mm dia pillar tap long body type cast copper alloy complete all as specified and directed.

S & F in repairs 15mm dia angle valves, Chromium plated crutch or butterfly handle screwed down high pressure, screwed both ends for iron pipes or for unions. (conforming to JAINKO Cat no. AVJ-5 or equivalent)

S & F in repairs 15mm dia 2-in-1 bib tap with angle valves, Chromium plated crutch or butterfly handle screwed down high pressure, screwed both ends for iron pipes or for unions.

S&F in repairs shower rose 150 mm dia of brass chromium plated fancy type with or without swivel joint suitable for fixing to 15mm bore GI pipe complete all as specified and directed.

S & F in repairs 15mm dia stop valves, Chromium plated crutch fancy type chromium plated with long shanks and cup (concealed type) , screwed both ends for iron pipes or for unions.

S & F in repair health faucet spray type jet with brass jet, chromium plated, and 1.5m long PVC flexible pipe complete all as specified and directed

S & F in repairs 15mm dia stop valves, Chromium plated crutch or butterfly handle screwed down high pressure, screwed both ends for iron pipes or for unions.

S&F in repair 10 litre capacity PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets with flush pipe 32mm dia

S&F in repair vitreous china wash down water closet pan (Pedestal pattern) coloured including fixing bolt and plastic water closet seat black closed pattern with flat bottom cover with MS chromium plated hinges devices to matching colour

S&F in repairs vitreous china water closet (squatting pan), orissa patern size 580 x 440mm white with integral, foot rests an including 'P' trap and lime bedding making good to floors complete

S&F in repairs tubular towel rail 20mm dia D type and 60cm long between flanges including brackets fancy type brass chromium plated

S & F in repairs brass CP Soap dish, 125mm any type, fixed to plugs with chromium plated brass screws (conforming to JAINKO Cat no. SDJ-1 or equivalent)

S & F in repairs vitreous china urinals, bowl type flat back size 465 x 355 x 265 mm white including providing and fixing plugs bedding urinal against wall CM 1:2 securing urinal with 60mm long brass screws pointing around urinal back in cement, fixing grating and urion for discharge pipe complete fixed in repairs.

S&F in repairs vitreous china wash basin, white, flat back, size 550x400mm including waste pipe, brackets and cutting for and pinning in ends of brackets or erecting stand but excluding taps, chain and plug.

M&L cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth all as directed.

M&L for providing Cast iron floor trap 75mm dia of outlet with grating including jointing to waste pipe fixed in cement concrete type B1 (1:2:4)

S&F grating square 150 mm size of PTMT(with waste hole) (Minimum weight 100gms) complete all as specified and directed by Engr-in-charge.

S&F grating square 150 mm size of PTMT(without waste hole) (Minimum weight 100gms) complete all as specified and directed by Engr-in-charge.

M&L 32mm dia Low density poly ethylene pipes(LDPE) of pressure rating 6 Kgf/cm2 fixed complete to wall, ceiling or in floors etc

M&L Low density poly ethylene pipes(LDPE) of pressure rating 6 Kgf/cm2 fixed complete to wall, ceiling or in floors etc 40mm dia

M&L 50mm thick PCC of type B-1, 1:2:4 (20mm graded stone aggregate) for padding

M&L for cement concrete type B0 1:2:4 (12.5 mm graded aggregate) 25mm thick as in coping, padding for flooring water troughs and the like including weathring, slightly rounded all as specified and directed.

Dismantling of wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.

M&L for demolition of RCC Concrete of any description and in any position not otherwise specifically provided for (reinforcement cut as required to facilitate demolition) all as specified and directed

S&F for Rotational moulded polyethylene water storage tank of 1000 liter capacity (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I

M & L for machine cut kota stone slab size as in flooring, stair case landing. treads of steps etc, 20-25mm thick over cement screed bed laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified including 15mm thick screed bed or bedding in cement mortar 1:6. all as specified nd directed

Demolition of cement concrete unreinforced of Concrete of any description and in any position not otherwise specifically provided for where directed.

M&L for machine cut kota stone slab size as in skirting, dado, vertical surfaces etc., 20-25mm thick, laid and jointed with grey cement sluirry mixed with pigment to match the shade of the slab including rubbing and polishing including backing coat of 15mm thick in CM (1:3) complete all as specified

M&L for 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- ills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite .

M&L for 20mm thick Granite (of any type) work (table rubbed and polished) for wall lining (veneering to wall) 12mm thick in cement mortar (1:3) and pointing with white cement (1:2) using marble dust with admixture of pigment to match with shade of granite.

M&L for cement concrete (1:3:6), type C2 (using 40mm graded stone aggregate) 50mm thick as in plinth protection inclujding necessary form work and finishing surface even and fair without using extra cement including bitumen joints complete all as specified

M&L, RCC in 1:2:4 type (20 mm graded aggregate) for slab supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slab and in shelves and the like etc all as specified and as directed by Engineer-in-Charge

M&LFormwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20cm wide and sides of RCC/ PCC bands in walls, horizontal or sloping and similar work exc 10cm but n exc 20cm wide

M&L,Formwork to rough finish surface of flat soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200m thick (Horizontal or sloping)complete all as specified and directed.

M&L TMT bars 10 mm dia & over cut to length, bent to shape required including cranking bending spirally for hooping for column, hooking ends & binding with & including mild steel wire (not less than 0.9 mm dia) or securing with clips quality conforming all as specified & as directed

-ditto- but 6mm to 8mm dia

M&L TMT bars 5 mm dia & over upto & including 10 mm dia in stirrups, spacers & binders etc all as specified & as directed

Taking down carefully surface aluminium or copper point wiring with PVC casing-caping (light, fan, socket, bell or power) including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fittings etc and making good disturbed surfaces complete.

M&L for point wiring with 1100 volts grade PVC insulated FR-LSH multistranded copper conductor cable 1.5 sqmm (Phase - Red, Neutral - Black) and earth continuity conductor 1.5 sqmm (Green) drawn into and including concealed rigid non metallic PVC conduit medium grade not less than 20 mm dia ISI marked ivory colour with all conduit fittings / fixing accessories and sunken galvanized pressed modular steel terminal boxes of thickness not less than 1.2 mm covered with suitable and required size of modular box, plate with cover for mounting switches, sockets, fan regulators complete including making good the wall surfaces with matching colour on wall for the following (Cable Make : Havells / Polycab / Finolex / Plaza as approved):- Note : Cutting chases,pinning in ,making good for facings where required will be measured and paid separately.

One light point controlled by one switch.

One fan point controlled by one switch.

One socket outlet 6 amp controlled by one switch on the same board with other switches.

One socket outlet 6 amp controlled by one switch on indepdendent board.

M&L for point wiring with 1100 volts grade PVC insulated FR-LSH multistranded copper conductor cable 2.5 sqmm (Phase - Red, Neutral - Black) and earth continuity conductor 2.2 sqmm (Green) drawn into and including concealed rigid non metallic PVC conduit medium grade not less than 20 mm dia ISI marked ivory colour with all conduit fittings / fixing accessories and sunken galvanized pressed steel terminal box of thickness not less than 1.2 mm covered with suitable and required size of modular box, plate with cover complete for one 16 amp socket outlet controlled by one switch on independent board including making good the wall surfaces with matching colour on wall (Cable Make : Havells / Polycab / Finolex / Plaza as approved).

S&F angle holder, insulated polycabonate body with back plate complete. Make - Havells Reo / Anchor Penta PC / Indoasian as approved.

S&F switch piano flush button single pole one way 6 amp complete.

S&F switch piano flush button single pole one way 16 amp complete.

S&F socket outlet 2 in 1, 3 pin 6&16 amp flush type complete.

S&Fsocket 6 amp 2 in 1, 2 & 3 pin, flush type complete.

S&F hum free electronic step fan regulator,120-280 volts of 100 Watt capacity (socket type) including connecting up complete.

S&F ceiling rose 6 amp, 3 plates polycarbonate body complete.

M&L for submain wiring alongwith earth continuity conductor with PVC insulated FR-LSH multistranded copper conductor cable (Phase - Red, Neutral - Black, Earth - Green) drawing into and including concealed rigid non metallic PVC conduit, medium grade, ISI marked ivory colour 20mm dia along with accessories of following nominal sizes 2x6 + 1x6 Sq mm earth continuity conductor complete.

M & L for submain wiring with two single core PVC insulated flexible copper conductor cable of sze 4 sqmm and one single core PVC insulated flexible copper conductor cable green colour of size 4 Sqmm as earth lead in & including concealed PVC conduit light grade cutting chases to walls for laying conduit and making good the disturbed wall surfaces to match with existing specification all as required at site. Make of Cable - Polycab/Plaza/Havells/GM.

Supply and Fix LED tube light fiiting complete 20 watt with decorative type fitting 4 feet long with Light Linea with its bright light output at 100 lumen/watt give ultra wide light distribution batten type complete including all accessories prewired and connecting electrically to ceiling rose using PVC insulated and overall sheathed flexible copper conductor cable of size 0.75 sqmm 3 core all as required at site or directed.

S&F LED fixture 9 watt including connection all as per philips LED LINER Ccat ref no. BN 55o WLED 6-6500 or equivalent in wipro or C&S Elect as approval.

Supply and fixing LED bulk head light fitting 1X10watts complete including connecting electricaly to ceiling rose using cord flexible 3 core PVC insulated over all sheathed with flexible copper conductor of suitable size all as required.

Earthing complete with galvanized steel earth plate electrode 60cmx60cmx6 mm thick buried directly in ground (Earth pit not less than 2.25 Mtr deep below normal ground level )with top edge of the plate not less than 1.5 Mtr below normal ground level connecting with galvanized iron GI earth wire 4mm dia by means of bolt nut check nuts and washers of galvanized iron and provision of GI tubing medium grade (ISI marked)of size 15mm for protection of GI earth wire upto test point, 20mm dia GI light grade watering pipe with funnel and wire mesh, RCC pit cover of size 300x300x40mm reinforced with XPM having weight not less than 4Kg/sqmm including 6mm thick MS bar handle made to shape, PCC pit with 1:3:6 type C1 with angle iron frame made of angle iron of size 40x40x4mm, adequate qty of charcoal dust and salt layers all around the earth plate, excavation , earth work in any type of soil, removal of excavated soil and returning filling in all as required at site complete all as specified in plate No 3 of SSR Part-I and all as specified or indicated including testing on completion.NOTE :-Rates inclusive of necessary excavation in any type of soil, earth work, PCC pit, RCC cover, funnel with watering pipe, GI earth strip upto 7.5 m long for connecting to test point etc. all as required at site for complete earthing).

S&F MCB distribution board SPN, 240 volts, 8 ways powder coated, CRCA steel sheet constructed as per IS : 8623, degree of protection IP 43 - IK 09 with metal door, recess mounted, having insulated 100 amp tinned copper bus bar, neutral busbar, earth bar, din bar, detachable gland plate, interconnection, earthing conncetion, blanking plates in unused spaces as required.

S&F MCB distribution board ETPN, 415 volts, 4 ways powder coated, CRCA steel sheet constructed as per IS : 8623, degree of protection IP 43 - IK 09 with metal door, recess mounted, having insulated 100 amp tinned copper bus bar, neutral busbar, earth bar, din bar, detachable gland plate, interconnection, earthing conncetion, blanking plates in unused spaces as required.

S&F MCB distribution board SPN, 240 volts, 4 ways powder coated, CRCA steel sheet constructed as per IS : 8623, degree of protection IP 43 - IK 09 with metal door, recess mounted, having insulated 100 amp tinned copper bus bar, neutral busbar, earth bar, din bar, detachable gland plate, interconnection, earthing conncetion, blanking plates in unused spaces all as per Legarand cat ref no 607710 or equivalent Hager or Schneider as approved.

S&F MCBs as per load requirement 'C' series of breaking capacity 10 KA, ISI marked including required wiring connections with copper lugs of suitable size provided in MCB DBs of following ratings :-

Single Pole 6 to 16 amp. Make - Legrand DX3 cat ref no 408587 to 408592 or equivalent in Schneider or Hager as approved.

Double Pole 32 amp. Make - Legrand DX3 cat ref no 408636 or equivalent in Schneider or Hager as approved.

Four pole 63 amp. Make - Legrand cat ref no 408702 or equivalent in Schneider or Hager as approved.

Taking down carefully aluminium or copper submain wiring with PVC surface conduit or casing caping and making good disturbed surfaces complete.

Taking down MCB distribution boards with incoming and outgoing controls any make, any capacity after disconnecting complete.

Supply & fix exhaust fans AC single Phase 230/240 V of size 300 mm sweep with louver, metal body.

Taking down Ceiling Fan of any make, type and sweep by disconnecting Electric Connection and keeping in safe castody for repair.

Hanging only ceiling fan and connecting up including provision of cable ceiling rose or connector to fans as directed.

S&F LED 20W streetlight made up of pressure die cast housing with prismatic polycarbonate deffuser and individual LED's with secondary optics and IP65 protection complete with fixing arrangement and connections as directed as per Bajaj cat Ref no BCLST 20W LED I code 169829 or equivalent in Philips or Wipro as approved.

yesh construction

nirman construction