Repairs to Class III & IV Government Servant Quarters (Block - H, I and J) on Tithal Valsad Road at Valsad, Dist: Valsad (Plaster Work,Colour Work, Water Proofing,Plumbing, Door window work, Flooring work and Other Misc. Work)

Name of work :-

Repairs to Class III & IV Government Servant Quarters (Block - H, I and J) on Tithal Valsad Road at Valsad,

Dist: Valsad (Plaster Work,Colour Work, Water Proofing,Plumbing, Door window work, Flooring work and

Other Misc. Work)

Bill of Quantities

(A) Percentage Rate Tender (Up to INR 50 Cr. )

Memorandum showing items of work to be carried out

Ite Quantity Unit Estimated Total Amount

Ite Quantity Unit Estimated Total Amount

No. Item of work In figure estimated

Rs. Ps. quantities

1 Dismentaling Tiled of stone floors laid in mortar including stacking of 207.00 Sqmt 48.21

serviceable materilas and disposal of unserviceable materials with all lead

2 Dismantling santtary fittings like wash basin . W.C. pan Indian and 24.00 Nos. 405.65

European type, flushing tank etc. including stacking the materials with all

3 Dismentling C.I. pipes G.S.W.pipes abd A.C. rain water pipes with fittings 75.10 Rmt. 75.08

and clamps including stacking the materials with all lead and lift ( for any

4 Demolition and disposal of unserviceable materials with all lead and lift.(i) 3.00 cumt 609.26

5 Removing and scraping of old deteriorated plaster of any thickness 597.00 Sqmt 19.57

fromm wall / R.C.C member including stacking of serviceable material and

disposal of unserviceable from site of work with all lead and lift

6 Removing, Repairing and Refixing Old existing wooden door shutter 28.00 No 1324.11

including repairing the shutter/frame using Randha machine and

replacing old fixture and fastening with new SS 304 grade fixtures like

Hinges, 1 Stoppers, 1 Aldrop , 2 Handle & 1 lock etc. and as directed by

engineer in charge etc comp.

7 Removing, Repairing and Refixing existing Alluminium window frame with 14.40 No 875.67

glass of all size shutter/frame, replacing all old Mosquite Net fixtures with

new locks, screws etc. including repairing the shutter/frame with Rates

includes all labour charges for removing, repairing & refixing the window,

all materials, transport cost, taxes etc.and as directed by engineer in

charge etc complete.

8 Removing, Repairing and Refixing existing Alluminium fix ventilation 13.00 No 348.45

frame with glass of all size shutter/frame, replacing all old fixtures with

new locks, screws etc. including repairing the shutter/frame with Rates

includes all labour charges for removing, repairing & refixing the

Ventilation, all materials, transport cost, taxes etc.and as directed by

engineer in charge etc complete.

9 Providing and laying water proofing treatment by conventional method 21.00 Sqmt 945.36

including cleaning the slab surface by wire brush as directed including

provding first layer of C.M. 1:4 of 40 mm thickness mixed with water

proofing compound at rate prescribed by manufacturer, including putting

of brick bats of average thickness 40 mm Well immerssed in water laid

uniformly on first layer of mortar including applying cement slurry @ rate

of 0.08 bag/sqm. on fixed layer of brick bats including maintaining

necessary slope, in second layer 40 mm thick C.M 1:4 mixed with water

proofing compound as directed, including finishing smooth with cement

slurry as directed complete.

10 P & L 30x30 cm. Matt Finished Ceramic Tiles 6 mm thick in flooring 21.00 Sqmt 970.07

treads of steps and landing laid on a bed of 12 mm thick cement mortar

1:3(1-cement:3-coarse sand)finishing with flush pointing in colour

cement slurry etc. complete. Colour and Shade approved by Engineer-In-

11 Providing and laying coloured glazed tiles of the size 300 mm x 200 mm x 38.00 Sqmt 1441.22

8 mm / 300 mm x 450 mm x 8 mm in skirting, risers of steps and dedo on

10 mm. thick cement plaster 1:3 (1 cement : 3 coarse sand) & jointed

with white cement slurry.

12 Providing and laying Vitrified tiles 8 to 10 mm thick , 24'' x 24'' in flooring 111.00 Sqmt 1067.50

treads of steps and landing laid on a bed of 12mm thick cement mortar

1:3 (1-cement : 3-coarse sand ) finishing with flush pointing in white

13 Providing and laying Vitrified tiles 8 to 10 mm thick , 24'' x 24'' in skrting 13.00 Sqmt 1141.45

risers of steps and dedo on 10mm thick cement plaster 1:3 (1- cement : 3-

coarse sand) and jointed with white cement slurry

14 Providing and laying polished Kota stone slab flooring over 20mm 20.00 Sqmt 965.59

(Average) thick base of cement mortar 1:6 (1-cement : 6-coarse sand) or

L.M. 1.1.5 (1-Lime putty :1.5 - coarse sand) laid over and jointed with

grey cement slurry mixed with pigment to match the shade of slab

including rubbing and polishing etc. complete. (A) 25mm thick

15 Providing and laying polished kota stone slab 25mm thick in risers of 4.00 Sqmt 1089.67

steps,skirting Dedo and pillars laid on 10mm thick cement mortar 1:3 (1-

Cement : 3 coarse sand) and jointed with gray cement slury mixed with

pigment to match the shade of slab including rubbing and polishing etc.

16 Providing laying and jointing in true line and level 15mm dia. U.P.V.C. 10.80 Rmt. 72.65

Pipe ( SCH- 40) for cold water including fittings as approved by Engineer

In Charge. Pipe shall be fixed on the wall with the help of clamp at every

two metre C/C or shall be concealed as directed including necessary

fittings etc. including testing of pipe and joints and fixing the same with

adhesive solvent, including cost of all materials.

17 Providing laying and jointing in true line and level 25mm dia. U.P.V.C. 28.80 Rmt. 91.84

Pipe ( SCH- 40) for cold water including fittings as approved by Engineer

In Charge. Pipe shall be fixed on the wall with the help of clamp at every

two metre C/C or shall be concealed as directed including necessary

fittings etc. including testing of pipe and joints and fixing the same with

adhesive solvent, including cost

of all materials.

18 Providing laying and jointing in true line and level 40mm dia. U.P.V.C. 9.00 Rmt. 148.12

Pipe ( SCH- 40) for cold water including fittings as approved by Engineer

In Charge. Pipe shall be fixed on the wall with the help of clamp at every

two metre C/C or shall be concealed as directed including necessary

fittings etc. including testing of pipe

and joints and fixing the same with adhesive solvent, including cost of all

19 Providing, laying and jointing in true line and level 75 mm dia. UPVC 10.00 Rmt. 698.92

SWRType B pipe conforming to IS 13592-1992 with one end plain and

other end socketed with rubbering and fitting conforming to ISI 14735-

1999 of approved make for drainage system pipe line, pipe shall be

jointed with each other with rubber lubricant, pipe shall be fixed on wall

using of PVC clamp at every 2000 mm c/c or shall be conceled in walss as

directed including necessary fittings such as bends, shoes etc. including

testing of pipes and joints and jointed with adhesive solvent cement

including cost of all materials.

20 Providing, laying and jointing in true line and level 110 diametre U.P.V.C 8.40 Rmt. 836.73

(Type B) conforming to IS 13592-1992 with one end plain and other end

socketed with rubber ring, & fittings conforming to ISI 14735-1999 of

approved make for drainage system pipe line, pipe shall be jointed with

each other with rubber lubricant, pipe shall be fixed on wall using of PVC

clamp of the size 110 mm diametre x 149 mm length x 145 mm heigh at

every 2000 mm center

to center or shall be concealed in walls as directed including necessary

fittings such as bends, shoes etc. including testing of pipes and joints and

jointed with adhesive solvent cement including cost of all materials.

21 Providing, laying and jointing in true line and level 160 diametre U.P.V.C 8.10 Rmt. 831.22

(Type B) conforming to IS 13592-1992 with one end plain and other end

socketed with rubber ring, & fittings conforming to ISI 14735-1999 of

approved make for drainage system pipe line, pipe shall be jointed with

each other with rubber lubricant, pipe shall be fixed on wall using of PVC

clamp of the size 160 mm diametre x 210 mm length x 196 mm heigh at

every 2000 mm center to center or shall be concealed in walls as directed

including necessary fittings such as bends, shoes etc. including testing of

pipes and joints and jointed with adhesive solvent cement including cost

of all materials.

22 Providing and fixing PVC SWR Nahni trap IS 14735 for drain - 100 mm 16.00 Nos 571.08

diameter with jali of the following nominal diameter of self cleansing

design with C.I scread down or hinged grating including the cost of

cutting and making good the walls.

23 Providing and fixing screw down bib taps of following size.(B) Brass 15.00 Nos. 186.83

chromium plated screws down Bib Tap. (i) 15mm dia.

24 Providing and fixing brass screw down stop tap.(A) 15mm dia. 15.00 Nos 205.83

25 Providing and fixing pillar tap, capstan head, screw down high pressure 15.00 Nos 308.73

with screws, shanks and back nuts. (i) 15mm dia.

26 Providing and fixing chromium plated brass half trun flush cock of 9.00 0.00 263.77

approved quality including fixing in pipe line etc. complete.(ii) 25mm dia.

27 Providing and fixing wsh down water closet (European type, W.C. Pan) 12.00 Nos 1303.71

with integral P or S trap including jointing the trap with soil pipe in

Cement Mortar 1:1 (1-Cement : 1-fine sand) (Seal and cover to be

measured and paid for separately) (A) vitreous China Pattern :(i) in white

28 Providing and fixing plastic seat and cover for wash down water closer 12.00 Nos 291.33

with C.P. brass hinges and rubber buffers. (B) Plastic seal and cover.

29 Providing and fixing washbasin with single hole for pillar tap with C.I. or 12.00 Nos 1506.45

M.S. brackets painted white including sutting holes and making good the

same but excluding fittings.(A) Vitreous China:(ii) Flat Back washbasin

mm x v 400mm size. (i) In white colour.

30 Providing and fixing C.P. brass waste for washbasin or sink. (A) 32mmdia. 18.00 Nos 67.91

31 Providing and fixing M.I. fisher union for washbasin or sink. (A) 32mm dia. 9.00 Nos 78.75

32 Providing erecting and fixing double coated ISI water tank of required 6000.00 Litre 3.95

capacity each with all necessary fittings and connection etc. complete on

33 Providing erecting and fixing double coated ISI water tank Man Hole 3.00 Nos 434.30

Cover of installed water tank of any capacity with all necessary fittings

and connection etc. complete on terrace

34 Providing and fixing ball cock of approved. quality as directed.(A) Copper 3.00 Nos 189.84

Metal (ii) 50mm dia.

35 Providing and fixing S.W. gully trap with C.I. grating brick masonry 9.00 Nos 1292.19

chamber and water tight C.I. cover with frame of 300mm x 300mm size

(inside) with standard weight.(i) Square mouth traps. (A) 100mm x

100mm size P type.

36 Carring out plinth treatment to post construction / existing structure by 0.00 Rmt. 124.28 -

spraying chemical solution for termite control treatment including labour

and material consistment with I.S.I specification. Using Chlordene and

Chiorpurfiles 20 EC. As Per 6131_paret-II Consentration Weight one

percent is recommended i.e one litre 20 EC chemical emulsion with

liter give 1 % concrentration inclusive of one litre chemical emulsion

appication at the rate of 5 Litre chemical / Sqm of surface is

recommended as per I.S

37 Carrying out timber treatment to all wood work including drilling holes 0.00 Nos 57.27 -

and spraying oil based chemical solution on surface of timber work for

termite control including labor and material etc. complete. Using

Chlorpyriphos20 EC as per 6313 2013 Part III (1% concentration by mass)

is recommended one litre chemical emulsion diluted with 19 liters of

kerosene. Total diluted concentration will be 20 liters inclusive of 1 liter

chemical emulsion application in drilled holes and 0.75 / Litre chemical

per one Sqmt two coat on wood surface not protected by paint or

38 Providing and fixing FRP frame size 125x65 mm and 35mm thick FRP 18.00 Sqmt 2019.98

shutter with wood grain raised panneled design finish shutter having

extra reinforcement on sides & edges in Gel coat finish. The core of the

shutter & frame is to be filed up with injected polyurethene foam done in

situ alongwith embedded wooden pieces for stiffening & also taking

hinges & fintures. The whole FRP frame & shutter is to be water proof

weather proof, termite proof & resistance to mild acid/alkali. Rates are to

be inclusive of S.S hinges with fastener sleeve & alluminium fixtures &

39 Providing and fixing 30mm thick factory made moulded door shutter 23.00 Sqmt 1979.60

wood free consisting of frame made out of M.S. tubes of 19 gauge

thickness and size of 25mm x 25mm for stiles, top and bottom rails, M.S.

frame shall have a coat of steel primers. The inner panel shall consist of

25mm thick High Density EPS conforming to IS 4671-1984 bonded with

2mm thick termite proof, water proof and fire resistant moulded PVC

sheet with 2,4,6 raised panel design in different plain and /or prelim

colours after routing the moulded design on one side and 2mm plain

and/or prelim PVC sheet on other side of the EPS. The edges of panel to

be sealed with lipping of 10mm wide PVC sheet batton (made by sticking

2 PVC rigid foam sheets of 5mm thickness using PVC solvent cement) and

stiles 25mm (5mm x 5) thick and 30mm width PVC sheet fitted along M.S.

tube for lock provision and for lock height 5mm thick PVC sheet of size

150mm x 100mm fixed with upper and lower face of inner side of EPS

panel etc. complete as per direction of Engineer in charge manufacture’s

specification and drawing.

40 Provoding and fixing flush door shutters, solid core construction with 8.00 Sqmt 1797.77

frame of first class hardwood with cross board and face veneer or

plywood face panels, including anodised alluminium butt hinges with

necessary screws. (B) Non-decorative type and block board core anodised

alluminium butt hinges in flush door shutters (2) 35 mm thick.

41 Providing corrugated G.I. sheet of class-3 roofing fixed with glavanished 9.00 Sqmt 727.13

iron J or L Hooks, Bolts and nuts 8mm diameter with bitumen and G.I.

limpet washer or G.I. limpet washer. filled with white lead complete

excluding the cost of purlins, Rafters and Trusses.(1) 0.80 mm thick sheet.

42 Providing 15mm thick cement plaster in single coat on Rough (Similar) 149.00 Sqmt 153.20

side of single or half birck walls / concrete wall for interior plastering and

finished even and smooth in C M 1:4 (1 cement : 4 coarse sand) finish

etc. comp. For Ground floor

43 Providing 15mm thick cement plaster in single coat on Rough (Similar) 149.00 Sqmt 176.59

side of single or half birck walls / concrete wall for interior plastering and

finished even and smooth in C M 1:4 (1 cement : 4 coarse sand) finish

etc. comp. For First Floor

44 Providing 15mm thick cement plaster in single coat on Rough (Similar) 149.00 Sqmt 199.98

side of single or half birck walls / concrete wall for interior plastering and

finished even and smooth in C M 1:4 (1 cement : 4 coarse sand) finish

etc. comp. For Second Floor

45 Providing 10 mm. Thick cement plaster in single coat for plastering on 35.00 Sqmt 140.95

ceiling and soffits of stairs and finished even and smooth in : (I) Cement

mortar 1:4 (1 cement : 4 sand) etc. complete comp. For Ground Floor

46 Providing 10 mm. Thick cement plaster in single coat for plastering on 35.00 Sqmt 164.34

ceiling and soffits of stairs and finished even and smooth in : (I) Cement

mortar 1:4 (1 cement : 4 sand) etc. complete comp. For First Floor

47 Providing 10 mm. Thick cement plaster in single coat for plastering on 35.00 Sqmt 187.73

ceiling and soffits of stairs and finished even and smooth in : (I) Cement

mortar 1:4 (1 cement : 4 sand) etc. complete comp. For Second Floor

48 20mm thick sand faced cement plaster on walls upto height 10 metres 45.00 Sqmt 300.66

above ground level consisting of 12mm thick backing coat of C.M. 1:3 (1-

cement : 3-sand) and 8mm thick finishing coat of C.M. 1:1 (1-cement : 1-

sand) etc. complete.

49 Removing dry or oil bound distemper by a washing and scraping and sand 492.00 Sqmt 11.30

papering the wall surface smooth including necessary repairs to scratches

50 Removing dry or oil bound distemper by a washing and scraping and sand 105.00 Sqmt 12.90

papering the ceiling surface smooth including necessary repairs to

scratches complete.

51 Applying two coats of putty & two coats of primer of approved brand and 336.60 Sqmt 40.59

manufacture on new wall surface to give an even shade including

thoroughly brushing the surface free from mortar dropping and other

foreign matter and sand papered smooth.

52 Wall painting (two coats) with plastic emulsion paint of approved brand 7431.80 Sqmt 80.35

and manufacture on undecorated wall surface to give an even shade

including throughly brushing the surface free from mortar droppings and

other foreign matter and sand papered smooth.

53 Wall painting (two coats) with plastic emulsion paint of approved brand 2301.00 Sqmt 85.76

and manufacture on undecorated ceiling surface to give an even shade

including throughly brushing the surface free from mortar droppings and

other foreign matter and sand papered smooth.

54 Finishing wall with weather proof exterior emulsion paint on wall surface 1487.00 Sqmt 114.53

(two coats) to give an required shape even shade after thoroughly

brushing the surface to remove all dirt, and remains of loose powdered

materials.etc complete

Rupees Eighteen Lakh Sixty one Thousand Only.

I/We am /are willing to carry out the work at…………% above/below percent (should be written in figures and words) at the

estimated rates mentioned above amount of my/your tender works out as under.

*Estimated Amount *Estimated Amount

put to Tender Rs. 1667000.00 put to Tender Rs.

Deduction …………….. % below………………… Add ………… % above Rs. …………….

1 The Contractor shall be exhibit board as per government circular No.BDG/3277/1657 N dated 26/01/1997 S (M.GUJ) with

detailed specification and details of work and amount Involved at site without any payment as directed by Engineer-In-

2 All work shall be carried out as per public work department hand book and other specifications of Division or as directed.

3 All columns in the Schedule should be filled in ink & the total of the entries in the last column should be struck by Contractor

under his sign.

4 Rates quoted include clearance of site (Prior commencement of work and its close) in all respects and hold good for work

under all condition, site, moisture/ weather etc.

5 The Boards stating the detailed specification & detailes of Work shal be provided by the contractor as per Government

Resolution T.No.1890-240- Dtd.18/11/1990 and directed by contractor at his own cost immediately on recommanding the

6 Testing of Material Shall be done as per the statement attached with specification,The material IS Tested in GERI by

Executive Engineer Surat and Bill for the testing charges shall be paid by Executive Engineer,1% of the Amount put to

7 1% of the Construction Cost Shall be deducted from the bill Amount of the contract as per the Buildig and other

Construction works walfare cess at 1996(Labour and Employment Department Letter No CWA-2004-1831-M(3)Dated

9/12/2005 notification Of Labour & Employment department dt.03/01/2005 & Labou & Employment Department Letter no

8 In Case of RCC items Where there is a change in Grade of Mix or Change as per Actual Mix design the cost of difference of

Cement Difference shall be deducted from the rate of original item at the rate of star rate mentioned in the tender.

9 Contractor are advised to visit site before loading tender rate.

10 Necessary wiring point and drainage point are installed at Site however any modification in electrical installation and

drainage & water supply connection and minor correction to perform experienced in Lab shall be done by contractor at his

11 The Rates are inclusive of all the taxes (Excluding GST),Transport Charges,Octroi duty and storage Charges up to date.

12 The materials Covered for wiring should be got approved from the Engineer Incharge of the work.

13 GST and Income tax TDS will be deducted at a source while making payments of bills.

14 GST will be paid extra as per Govt. amendment.

15 The Materials on the work shall have to be used and carried out as specified in technical note.

I/We hereby Declare that I/we have Visited the site and fully Exquisite myself/ourselves with the local situation regarding

(A) materials,Labour and other factors pertaininfg to work before submitting tender.

I/We hereby Declare that I/we have carefully Studied the condition of Contracts,Detailed Specification and other tender

Document of this work and agree to execute the same accordingly.

Deputy Executive Engineer

Valsad (R&B) Sub-Division

Signature of Bidder

Executive Engineer

Valsad (R&B) Division