Construction of Shed at Various Villages under New Gujarat Pattern - 2026-27 Package No. SK/NGP/01

Excavation for foundation upto 1.5 m depth including sorting out and stacking of useful materials and disposing off the excavated stuff upto 50 Meter lead.(A) Loose or soft soil

Providing and laying cement concrete 1:4:8 (1- Cement : 4- coarse sand : 8- hand broken stone aggregates 40 mm nominal size) and curing complete excluding cost of formwork in (A) Foundation and Plinth

Brick work using common Brunt clay building bricks having crushing strength not less than 35 Kg./ Sq.cm. in foundation and plinth in cement mortar 1:5 (1 cement: 5 fine sand) (b) Conventional

Filling in plinth with sand under floors including watering ramming, consolidating and dressing etc. Complete

Providing and casting in situ ordinary cement concrete M-150 for coping, over riding returns including formwork curing and finishing complete.

Brick work using common Brunt clay building bricks having crushing strength not less than 35 Kg./ Sq.cm.in super structure above plinth level upto floor two level. in cement mortar 1:5 (1 cement: 5 fine sand) (b) Conventional

Providing and laying cement concrete 1:2:4 (1- Cement : 2- Coarse sand : 4- graded stone aggregates 20 mm nominal size) and curing complete excluding cost of formwork in (B)Independent piers, columns, and pillars, upto floor two level

Providing and laying ordinary cement concrete 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregates 20 m.m. nominal size) and finishing smooth with curing etc. complete including the cost of form work but excluding the cost of reinforcement for R.C.C. work in G.F. in : Slab(ii) Slab having more than 10 cms and up to 13 cms thickness.

Provinding thermo mechanically treated bar (T.M.T.) confirming to I.S.1788 / F.C.415 for R.C.C. work incl. bending, binding & placing in position comp. up to floor two level. For G.F.

Providing and Fixing polished Green marble stone with moulding around Sill & Jamb of Window

Providing and laying polished Kota stone slab flooring over 20mm(Average) thick base of cement mortar 1:6 (1-cement : 6-coarsesand) or L.M. 1.1.5 laid over and jointed with grey cement slurryincluding rubbing and polishing etc. complete. (B) 30 mm thick

Providing 10mm thick cement plaster in single coat on brick/concrete walls for interior plastering upto floor two leveland finished even and smooth in (i)Cement mortar 1:3 (1-cement:3-sand)

20 mm. thick sand faced cement plaster on walls upto height 10 meters above ground level consisting of 12 mm. thick backing coat of c.m. 1:3 (1 cement : 3 sand) and 8 mm. thick finishing coat of c.m. 1:1 (1 cement : 1 sand) etc. complete.

Applying two coats of Birla or Asian (or equivalent) acrylic lapy ( putty) & two coats of primer of approved brand and manufacture on new wall surface to give an even shade including thoroughly brushing the surface free from mortar dropping and other foreign matter and sand papered smooth.

Wall painting (three coats) with Plastic emulsion paint of approved brands like Apex or equivalante and manufacture on undecorated wall surfaces to give an even shade including thorougnly brushinf the surface free from mortar droppings and other foreign matter and sand papered smooth.

Providing and fixing of Ridge flashing for roof panel shall be madeout of 0.5 mm thick pre coated GI sheet . The Precoated sheetshall be of minimum 240 mpa steel grade confirming to IS14246:1995 and shall have zinc coating of minimum 120 gsm asper IS:277:1992 , 5-7 microns epoxy primer on both side of thesheet and polyester top coat 15-18 micron. The PPGI Sheet shallhave plastic protective guard film of minimum 25 microns toavoid scratches during transportation. The ridge shall be fixed tothe steel members by pop rivet or self drilling/self stitchingfastners @ maximum 450 mm c/c along length of capping/flashingetc complete .

Steel work, riveted in built up sections framed work including cutting, hoisting, fixing in position and applying a priming coat of red lead paint.(A) In beams and joists, channels angles Tees, flats, with connecting plates or angle cleats as in main and cross beams. Hip and jack rafters ,purlins conneted to common rafters and the like.

Estimated Amount

put to tender Rs. _________

Add_______% Above

Net Rs._________

in words ___________

The Contractor shall exhibit a board with detailed specification and details of work as directed by the Engineer-In-Charge for which no extra payment shall be made.

The labour cess will be deducted as per prevailing rules i.e. 1% of the work done.

GST and Income tax TDS will be deducted at a source while making payments of bills.

In all R.C.C. Items in Rate Analysis Standard Cement Consumption has been taken as per Govt. G.R.: PRC-10/2017 Cement Consumption/16/C Date:11/05/2017 as stated in S.O.R. therefore in R.C.C. items where there is a change as per actual mix design the cost of difference of cement consumption have been deducted from the rate of original item at the rate of input rate mentioned in all the tender.

Executive Engineer

Panchayat R.&B. Division

Himatnagar