REPAIR TO STREET/SECURITY LIGHTS ALONG MAIN ROAD AND BOUNDARY WALL AT SOUTH OF RAILWAY LINE UNDER GE MISSAMARI

Amount

Taking down unservicable high mast light fittings of any height/watt/make, repair the same in site by opening cover, replace the unserviceable parts unserviceable/burnt cable etc as required at site, after repairing fixing at same position, complete all as specified and as directed. Note:- (a) Spare part i.e. driver wherever required will be measured and paid under appropriate Item(s) as 'supply only'. (b) Labour Element for replacement of unserviceable Parts will deem to be included in the QUOTED UNIT RATE.

Supply only Electronic LED driver 160 watt 220/230/240 Volt, complete all as specified as directed of suitable make, complete all as specified and as directed.

Repair, attending and rectifying complaints of street lights fitted on steel tubular/ PCC poles of approx height 9 mtr in the area to the south of railway line by deploying technically qualified and experienced technicians by using T&P/ ladder to become reachable at a height of security light to make the street light functional by checking connection, tighting and removing of carbon/ galvonic corossion etc. complete all as directed. Note:- (a) Spare part i.e. driver wherever required will be measured and paid under appropriate Item(s) as 'supply only'. (b) Labour Element for replacement of unserviceable Parts will deem to be included in the QUOTED UNIT RATE.

Repair, attending and rectifying complaints of streeet lights fitted on double swan neck poles located around station bounday wall to the south of railwayline. by deploying technically qualified and experienced technicians by using T&P/ ladder to become reachable at a height of security light to make the street light functional by checking connection, tighting and removing of carbon/galvonic corossion etc, complete all as directed.

Supply only Electronic LED driver 45 watt 220/230/240 Volt, complete all as specified and as directed.

Supply only Electronic LED driver 60 watt 220/230/240 Volt, complete all as specified and as directed.

Supply only Electronic LED driver 90 watt 220/230/240 Volt, complete all as specified and as directed.

S&F Junction Box for Street Lights of size 205x255x112 mm made out of Polycarbonate material totally enclosed, dust and vermin proof, rain protected slanted roof top, door pasted with rubber gasket, water tight IP 66/67 protection and suitable size of "connectwell" stud teriminal (provision for socket bolting)- 04 Nos suitable for 415 volts, 50 Hz, 3 phase 4 wire internal wiring system including MCB SP 06 amps- 01 No and mounted on security light pole with suitable bracket nuts, bolts including removal of exiting unserviceable all as specified and directed. Note :- Cable glands shall be fixed in inlet and out let of junction box and rate of Cable glands is deem to be included in quoted rate.

S&F All in one solar street light of 25 watt comprising of high effficasy LEDs (120 lm/w), efficiency 30 wp monocrystalline solar panel , new age lithium ferro phosphate battery 12.8 v/30 ah, silicon encapsulated high efficiency MPPT charge designed aluminium housing for better heat dissipation & strategically placed performations allowing natural air passive circulation within and into the housing for improved thermal management of internal components, including mounting brackets , in-built PIR motion sensor with IP65 protection.including taking down old unserviceable one, complete all as specified and directed.

S&F LED street light made up off pressure die cast aluminium housing wth toughened glass and high power LEDs as a light source and electronic driver of capacity 45 watts and secondary lenses with IP 66 protection. 10 KV SPD is also included for protection of driver and LEDs, lumen efficacy of light fitting shall be >=110 lm/W. and necessary mounting arrangements and provision of 2.5 sq mm three core conductor cable multi stranded from fitting to over head line or Junction box including taking down old unserviceable light fitting.complete all as specified and directed. Note :- Housing of street light fitting shall be suitable for 40 to 50 mm dia of bracket.

S&F LED street light made up off pressure die cast aluminium housing wth toughened glass and high power LEDs as a light source and electronic driver of capacity 60 watts and secondary lenses with IP 66 protection. 10 KV SPD is also included for protection of driver and LEDs, lumen efficacy of light fitting shall be >=110 lm/W. and necessary mounting arrangements and provision of 2.5 sq mm three core conductor cable multi stranded from fitting to over head line or Junction box including taking down old unserviceable light fitting.complete all as specified and directed. Note :- Housing of street light fitting shall be suitable for 40 to 50 mm dia of bracket.

S&F LED street light made up off pressure die cast aluminium housing wth toughened glass and high power LEDs as a light source and electronic driver of capacity 90 watts and secondary lenses with IP 66 protection. 10 KV SPD is also included for protection of driver and LEDs, lumen efficacy of light fitting shall be >=110 lm/W. and necessary mounting arrangements and provision of 2.5 sq mm three core conductor cable multi stranded from fitting to over head line or Junction box including taking down old unserviceable light fitting.complete all as specified and directed. Note :- Housing of street light fitting shall be suitable for 40 to 50 mm dia of bracket.

S&F Energy saving new generation environmental friendly long life versatile pressure die cast aluminium IP 66 flood light fitting luminaire with high power LEDs as light source and electronic driver of capacity 120 watts with lumen efficacy >=110 lm/W and 10 KV surge protection device, including taking down old unserviceable fitting complete all as specified and directed.

S&F 45 Watt Sensor LED Street light made up off pressure die cast aluminium wth high efficency LED > 140 lm/W as lighting source and lens embedded PC cover having TOP opening separate driver compartment with IP66 Protection and impact resistance of IK07 with Autonomous IR Sensor based dusk to dawn street light, IR sensor to mitigate the effect of sorrunding artifical ligh, life L70 B50 : 5000 hours, high efficency polycarbonate UV stablized cover with integrated lens electronic driver isolated electronin LED driver (SMPS based constant current supply) with lower THD<10% system efficacy 110 lm/W, power factor > 0.95, out open/short circuit protection 10KV with SPD and necessary mounting arrangements and provision of 2.5 sq mm three core conductor cable multi stranded from fitting to over head line or Junction box including taking down old unserviceable light fitting.complete all as specified and directed. Note :- Housing of street light fitting shall be suitable for 40 to 50 mm dia of bracket.

S&F LED street light made up off pressure die cast aluminium housing wth toughened glass and high power LEDs as a light source and electronic driver of capacity 180 watts and secondary lenses with IP 66 protection. 10 KV SPD is also included for protection of driver and LEDs, lumen efficacy of light fitting shall be >=110 lm/W. and necessary mounting arrangements and provision of 2.5 sq mm three core conductor cable multi stranded from fitting to over head line or Junction box including taking down old unserviceable light fitting.complete all as specified and directed. Note :- Housing of street light fitting shall be suitable for 40 to 50 mm dia of bracket.

M&L street light fittings bracket made out from GI pipe 32 mm bore, light grade 1.00 meter long bent to required shape and fixing to poles walls etc including supply and fixing of MS clamp nuts, bolts as required duly painted with two coat of aluminum paint over a coat of red oxide primer including taking out old one, complete all as specified and as directed. Note : The cost of painting shall be deemed to be included in the unit rate quoted against this item

Taking down/out unserviceable UG Cables of any Cross Sectional Area and Connections and joints including Pipes, Bricks, etc of any description laying in trenches or fixing with Walls/Poles, segreating serviceable Pipes, Cables etc and keep in safe custody for reuse, complete all as specified and as directed. Note : Earthwork will be measured and paid under appropriate Items.

Fixing Only LT UG XLPE cable of size 10 Sqmm, 2 Core aid in trenches/ floors/ on wall/ run through pipe/pole and connecting to the main switches/ cut outs MCB/ MCCB/Pole with necessary lugs complete all as specified and as directed. Note: (i) LT UG cable 10 Sqmm, 2 Core will be issuued under Sch B (ii) Earthwork, Sand coushioning, brick protection will be measured and paid under appropriate Items.

Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 10 sqmm 4 core laid in trenches/ floors/ on wall/ run through pipe/pole and connecting to the main switches/ cut outs MCB/ MCCB/Pole with necessary lugs complete all as specified and as directed.

Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 16 sqmm 4 core laid in trenches/ floors/ on wall/ run through pipe/pole and connecting to the main switches/ cut outs MCB/ MCCB/Pole with necessary lugs complete all as specified and as directed.

Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 25 sqmm 4 core laid in trenches/ floors/ on wall/ run through pipe/pole and connecting to the main switches/ cut outs MCB/ MCCB/Pole with necessary lugs complete all as specified and as directed.

Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 35 sqmm 3.5 core laid in trenches/ floors/ on wall/ run through pipe/pole and connecting to the main switches/ cut outs MCB/ MCCB/Pole with necessary lugs complete all as specified and as directed.

Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 95sqmm 3.5 core laid in trenches/ floors/ on wall/ run through pipe/pole and connecting to the main switches/ cut outs MCB/ MCCB/Pole with necessary lugs complete all as specified and as directed.

Excavation in trenches not exceeding 1.5m wide and not exceeding 1.5m in depth for for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc laying of cables etc and getting out in soft/loose soil complete all as specified and as directed.

Returning, filling in, including, spreading, levelling, watering and well ramming in layers not exceeding 25cm complete all as specified and as directed.

Removing excavated material n.exc 50m and depositing were directed at a level not exceeding 1.5m above the starting level complete all as specified and as directed.

M & L for Sand Cushioning (dry) in trenches/ducts for protection of UG Cables (below, above and around the UG Cable laid in Trenches) of 23 Cm Spread thickness (8 Cm in depth before laying the Cable and 15 Cm in depth after laying the Cable) and consolidated (punned) upto 180 mm thickness, complete all as specified and as directed. Note : For the purpose of Payment, Punned thickness of Sand Cushioning only shall be measured and paid for.

Supply and laying for brick protection for protection of cable over sand cushioning cables inside the trench by using common brunt clay building bricks sub-class “B” old size brick and flat and width wise along the axis of the trench complete all as specified and directed.

M&L cutting PCC/Hardstanding/Road Surfaces not exc 20cm width and depth not exc 45cm, for passing out UG cable, Returning, filling in,removing surplus soil and making good the distrubed surfaces using PCC minimum thickness 15cm using Type C1 (I:3:6) 20mm graded aggregate complete all as directed.

S&F in repair GI Tubing light grade of size 80mm dia in protection of cable at road crossing /hard standing/pole protection fixed with clamp as per site requirement etc complete all as specified and directed.

S&F in repair GI Tubing light grade of size 50mm dia in protection of cable at road crossing /hard standing/pole protection fixed with clamp as per site requirement etc complete all as specified and directed.

S&F in repair GI Tubing light grade of size 40mm dia in protection of cable at road crossing /hard standing/pole protection fixed with clamp as per site requirement etc complete all as specified and directed.

S&F in repair GI Tubing light grade of size 32mm dia in protection of cable at road crossing /hard standing/pole protection fixed with clamp as per site requirement etc complete all as specified and directed.

Taking out old LT underground cable of 10 sqmm to 16 sqmm, cutting out defective portion of cable , jointing and re-laying the UG cable, in trenches/through pipe in road crossings/ paths /drains /ducts /floors /along poles/walls/ceilings/ equipments etc, glands etc as required for connection including commissioning and testing complete all as specified and as directed. Note:- (i) Joint Kit as required shall be measured and Seperately under appropiate item (ii) Earthwork, Sand Coushioning, Brick Protection to cable will be measured and paid under appropriate Items. (iii) Cable if required shall be measured and paid seperately under appropiate Item

M&L repairing of street light junction box, tighting of loose nut, bolts, screws etc including cutting of burnt thimbles/ LT cable, taking out LT cable from Loop and recconecting to bus bar with new thimbles duly crimpped with cable complete all as specified and as directed.

Trimming /pruning of the tree branches coming around the street light fittings and making the street light free from touching the tree branches not less the 3 mtr radius complete all as specified and as directed.

S&F surface mounting digital time switchs 240 volts, 50 HZ, one module and connecting with contactor including Taking down Unserviceable time switch complete all as specified and as directed.

S&F contactor suitable for street light time switchs 4 Pole 100 Amps 415 Volts including Taking down Unserviceable contactor switch complete all as specified and as directed.

S&F three phase street light panel astronomical type with maximum load 12KW contactor rating 32 Amps three pole with MCB TPN 40 Amps ,including Taking down Unserviceable street light panel switch complete all as specified and as directed.

M&L Straight through Heat shrinkable joint kit with jointing material and accessories suitable for XLPE armoured aluminium conductor cable of size 10 sqmm to 16 sqmm, 2/4 Core,complete all as specified and directed.

Supply & Erecting Steel Tubular Swaged Pole Type 410-SP-31 (9.0 METRE long) including Cast Iron Base Plate, Finial Taper Plug, Cap, Mild Steel Bolts, Nuts, Screws including applying two coats of Black Bituminous Paint Internally and Externally from bottom End of Pole upto PCC Coping and applying with two coats of Aluminium Painting over a coat of Aluminium Primer (Externally) above copping shall be painted with in alternate band/strip of black and yellow colour starting with black colour upto height of 1.5 from top of copping, writing MES Pole No. with synthetic Enamel Paint (First Grade/quality)including Dismantling unserviceable Steel Tubular Poles including demolition of Cement Concrete (as/if required) and made good disturbed Ground, complete all as specified and as directed. NOTE: (i) Earthwork, Cement Concrete, etc. will be measured and paid under approprite Items. (ii) Unserviceable Poles will be dismantled at Ground Level and disturbed ground will made good as directed and cost of Earthwork, demolition of Cement Concrete, etc. is deemed to be inclusive in Unit Rate Quoted

M&L PCC (1:4:8) type D-2 (using 40 mm graded stone aggregate) as in foundation of pole, mass concrete including necessary formwork ad required complete all as specified and as directed.

M&L PCC (1:3:6) type C-2 (using 40 mm graded stone aggregate) as in foundation of pole, including necessary formwork ad required complete all as specified and as directed.

M&L PCC (1:2:4) type B-2 (using 40 mm graded stone aggregate) as in C opping of pole, including necessary formwork ad required complete all as specified and as directed.

S&F in repair, LED bulb 15 watt, suitable for post top lantern complete all as specified.

S&F in repair, LED bulb 9 watt ,1200 lumen retrofit type complete all as specified.

M&L preparing old painted surfaces by scraping and removing old paints, rust, etc. from Steel Tubular Poles (above the Planting Depth and PCC Copings of 9.0 Metre length Pole) and Mild Steel Cross Arms, Cable Protection Pipe, Brackets, etc. and applying one Coat of Red Oxide Zinc Chrome Primer, alternate Yellow & Black Strips Painting (4 No. Each Strip 200 mm wide) and remaining portion of Pole and Cross Arms, Cable Protection Pipe, Brackets, etc. treated with Two Coats of Aluminium Paint, complete all as specified and as directed.

M&L preparing old painted surfaces by scraping and removing old paints, rust, etc. from Pre-stressed Concrete Pole (above the Planting Depth and PCC Copings of 8.5/9 Metre length Pole) and Mild Steel Cross Arms, Cable Protection Pipe, Brackets, etc. and applying Two Coats of Synthetic Enamel Painting in alternate Yellow & Black Strips Painting (4 No. Each Strip 200 mm wide) and remaining portion of Pole treated with Two Coats of Exterior Weather Proof Paint and Mild Steel Cross Arms, Cable Protection Pipe, Brackets, etc. treated with Two Coats of Aluminium Paint, complete all as specified and as directed.

S&F 40 Watt, IP 65 LED post top light, aesthetically designed with symmertical light distribution, spun aluminum landscape luminaire with high power LED as light source, clear cover for bright illumination and connecting with and including three core twisted flexible copper conductor of size 23/0.193 from control DB to fitting/driver complete all as specified & as directed. Note:- (i) Mounting the LED post top light including PCC type C2 1:3:6, (20cm below GL and 15 cm above GL) including form work, necessary earth work and fixing arrangement is deemed to be inclusive in the Unit rate Quoted (ii) GI pipe as required will be measured and paid seperately under appropiate item

S&F 8 Watt,(or the next nearest higher wattage) IP 65 LED bollard, innovative design with uniformity lit diffuser at the upper portion act a beacon of path guidance in a landscape with and including three core twisted flexible copper conductor of size 23/0.193 from control DB to fitting/driver complete all as specified & as directed. Note:- Mounting the Bollard including PCC type C2 1:3:6, (20cm below GL and 15 cm above GL) including form work, necessary earth work and fixing arrangement is deemed to be inclusive in the Unit rate Quoted

S&F 10 Watt, inverted pyramid tripod type LED Bollard with soft 360 degree light distribution, IP 65 and connecting with and including three core twisted flexible copper conductor of size 23/0.193 from control DB to fitting/driver complete all as specified & as directed. Note:- Mounting the Bollard including PCC type C2 1:3:6, (20cm below GL and 15 cm above GL) including form work, necessary earth work and fixing arrangement is deemed to be inclusive in the Unit rate Quoted

S&F 6 Sqmm , twin core PVC insulated weather proof, sheathed, solid aluminum conductor run through pole/pipe for connection from junction box to light fitting connector block complete all specified & as directed.

S&F Aluminium Conductor Steel Reinforced (ACSR) (sizes as ordered) with permissible Sags and providing Jumper, etc.,fixing on Electric Poles and binding to Insulators with Aluminium Binding Wire as in OH Conductors including stringing, tightening, etc., including Dismantling ACSR or AAC Conductors from the Disturbed Span including Line Spacer, etc.complete all as specified and as directed. NOTE: Cost of Binding Wire is deemed to be included in the QUOTED UNIT RATE.

Re-stringing to OH Line ACSR Conductor on existing Lines by un-binding from the Insulator of any description, re-fixing after stretching the Conductor, removing excess Sag, maintaining proper distance between Conductors as ordered, complete all as specified and as directed. NOTE :– (a)Cost of Binding Wire is deemed to be included in the QUOTED UNIT RATE.

S&F Insulator Pin type Porcelain, Vitreous, White, Brown or Green including one Galva-nised Mild Steel Spindle, Two Galvanised Iron Washers and One Galvanised Iron Nut, 100mm Height, 65mm dia for 1100 Volt grade including Dismantling Insulators like from existing Street/ Security Light Pole complete all as specified and as directed.

S&F Shackle type, Porcelain, Vitreous, White or Brown Insulator of size 90mm height 75mm dia including Galvanised Mild Steel 31x3mm Strap, 12mm dia Insulator Bolts, Nuts, Washers, etc. for Working Pressure 1100 Volt, including Dismantling Insulators like from existing Street/ Security Light Pole complete all as specified and as directed.

M&L Stay Assembly complete with Accessories as show in Electrical Plate No. 1 of MES Schedule Part-I, diameter of Stay Rod 16mm, size of Plate 230x230x6mm including 7/3.15 mm Galvanised Stay Strand,Loop Type Insulator Vitreous White, Brown or Green, large size with overall dimensions 90x65mm, clearance of hole 16mm dia, MS clamp made out of 50mm x 6mm with nuts bolts wahers as required including Dismantling Stay Assembly complete all as specified and as directed. NOTE:(i) Earthwork, Cement Concrete, will be measured and paid under approprite Items. (ii) Unserviceable Stay Assembly will be dismantled at Ground Level and disturbed ground will made good as directed for which Earthwork, demolition of Cement Concrete, etc. is deemed to inclusive in the Unit Rate Quoted

M&L Cross arms, bracings, supports,clamps and back plates fabricated from structural steel sections including nuts, bolts, washers, welding, bending cold or hot, drilling holes for bolts, in any shape or size as indicated or directed and inclusive of one primer coat, one under coat and one finishing coat of paint including Dismantling Cross-Arms of Mild Steel Channel or Angle Sections, etc, complete all as specified and directed.

S&F PVC Line separtor(Spiral type) for overhead conductor 2 Way, complete all as specified and directed

S&F PVC Line separtor(Spiral type) for overhead conductor 4 Way, complete all as specified and directed

S&F 2.5Sqmm PVC insulated weather proof, sheathed,3 core, multistranded copper conductor run through pole/pipe for connection from junction box to light fitting connector block complete all specified & as directed.

P&B Infrastructure (BID ID -3060265)

M/S RANA ENGINEERING ENTERPRISE (BID ID -3058940)

Maa Mira Enterprise (BID ID -3057621)

bkgeneralstores (BID ID -3056088)

United Traders (BID ID -3059007)

M/S Krishna Construction Co. (BID ID -3059918)