WBPWD/EE/PED/NIQ15 /2025-2026

Amount

Distribution wiring in 1.1 KV grade 2x22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire (Brand approved by EIC) partly in 20mm size PVC rigid conduit 'FR' (Precision make) [for ceiling portion only] and in 19mm bore, 3mm thick polythene pipe [for horizontal & vertical run embedded in wall], with 1x22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire for ECC, to light/fan/call bell points with Piano Key type switch fixed on MS CRC sheet metal (16 SWG) switch board on wall complete with 2 no. “Ph & N” copper bar incl. bakelite/ Perspex top cover 3 mm thick and incl. 175x100x65mm inspection box, making earthing attachment, painting the MS box and mending good the damages to original finish [only PVC Rigid Conduit on ceiling and remaining portion concealed] [E-15/5] Average run 8 mtr [E-15/5(c)]

Distribution wiring in 1.1 KV grade 22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire (Brand approved by EIC) in 20mm size PVC rigid conduit 'FR' (Precision make), with 1.1 KV grade 1 x 22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire as ECC, to 5A 3 pin flush type plug socket & Piano Key type switch fixed on MS CRC sheet metal (16 SWG) switch board cum JB on wall incl. bakelite/Perspex (wall matching color) top cover 3 mm thick and incl. painting the MS box and mending good the damages to original finish On Board [E-15/4(a)]

Distribution wiring in 1.1 KV single core stranded 'FR' PVC insulated & unsheathed copper wire (Brand approved by EIC) in 20mm size PVC rigid conduit 'FR' (Precision make) incl. necy.fittings as required [E-14/1(a)]

2 x 22/0.3 (1.5 sqmm) + 1 x 22/0.3 (1.5 sqmm) ECC [E-14/1(a)(i)]

2 x 36/0.3 (2.5 sqmm) + 1 x 22/0.3 (1.5 sqmm) ECC [E-14/1(a)(ii)]

Finishing of the PVC insulated wire ends by socketting with pin/ ring type copper sockets and insulated tapes etc., including supplying sockets, tapes. [F-5/9]

1.5 sq mm [ NS]

2.5sqmm [F-5/9(i)]

Supply & Fixing 240 V, 6A, plug socket with separate 6 A Piano key type switch (Brand approved by EIC) on sheet metal switch board embedded in wall incl. S & F 150x100x65mm MS (16SWG) switch board and bakelite/perspex top cover of 3mm thick by Brass screws after making housing for switch by cutting bakelite/perspex cover and making necessary connections as required. [E-6/21]

Supply & Fixing 240 V, 3 nos. 6A, & 1 no. 20A plug socket with separate 3 nos. 6 A & 1 no. 20A Piano key type switch, indicator & 20A switch type SP MCB (Brand approved by EIC) on sheet metal switch board embedded in wall incl. S & F 240x200x65mm MS (16SWG) switch board andbakelite/perspex top cover of 3mm thick by Brass screws after making housing for switch by cutting bakelite/perspex cover and making necessary connections as required [E-7/26]

Supplying & Fixing MS fan clam of two piece type for RC ceiling as per approved specification, fabricated from 40 mm x 9 mm MS flat including making good damages to building roof with satisfactory finishing and painting – (As per Drawing no. 475 of PWD Specification Book – May 1991) [D-14/29]

Supply & Fixing Socket type fan regulator (Step type) (Brand approved by EIC) on existing sheet metal switch board with bakelite/perspex top cover by screw after making housing for regulator knob by cutting bakelite/perspex top cover incl. making necy. connections etc. [E-6/18(a)]

S & F double-door 2+12 way SPN MCB Distribution Board with IP-42/43 protection, concealed in wall after cutting the wall & mending good the damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing attachment.2+12 way Enclosure (607712) Legrand or Eqvt make of L&T/Seimens/Hager -[D-9/13]

Supplying and fixing double door Horizontal 4 way TPN MCB Distribution board with IP-42/43 protection, concealed in wall after cutting the wall & mending good the damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing attachment4 way Enclosure (607715) Legrand or Eqvt make of L&T/Seimens/Hager - [ D- 10/14 ]

Supplying and fixing double door 4 way Vertical TPN MCB Distribution board for MCCB incomer with IP-42/43 protection, on angle iron frame on wall & mending good the damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing attachment. 4 way Enclosure (607913) [D-11/15] [D-11/15]Legrand or Eqvt make of L&T/Seimens/Hager [D-11/15]

Supplying and fixing 240/415 V MCB Isolator on din rail of existing DBs and necessary connection as perGS [Make-Legrand ] or Eqvt make of L&T/Seimens/Hager

Supplying and fixing 240/415 V MCB of Breaking capacity 10kA & C characteristics on din rail of existing DBs and necessary connectionas per GS [ Make -Legrand or Eqvt make of L&T/Seimens/Hager]

Supplying and fixing 415 V Four Pole MCCB of Breaking capacity 25kA/35kA in existing Vertical DBs including necessary connection as per GS Make -Legrand or Eqvt make of L&T/Seimens/Hager]

Supply of 4' 22W T8 LED tube light with complete set (Make:- Philips TMC 502 1xT-LED 22W, Master LED tube 1200mm 18W 865T8I-2100lm ) [NS]

Supply of 4' 22W T8 LED tube light with complete set (Make:- Philips TMC 502 2xT-LED 22W , Master LED tube 1200mm 18W 865T8I-2100lm ) [NS]

Supply of LED bulb 9 watt (Make- Philips/ Cropmpton/ Havells)

Supply of AC ceiling fan of following sizes complete with blades, canopy , fork down rod etc. with safety wire ( Make - New Breeze /Crompton Make- High speed)

1200mm(48'') sweep (Crompton -Rivirea)

Fixing only single/twin fluorescent light fitting suspended 25 cm bellow the ceiling with 2 No. 20 mm dia EI conduit (14 SWG) supports fixed with “L” type MS clamp whose one side fixed on ceiling with sutable size 4 nos. fastener and other side connected with the conduit with suitable size of bolts and nuts incl. S&F EI conduit, “L” type (125mmx125mm) 6mm thick and 25mm with MS clamps and connecting the length of PVC insulated wire and mending good damages to original finish and painting etc. by 2x24/0.20 mm (1.5sqmm.) flexible copper wire of 1.10 mt. length [ C-2/17 ]

Extra for suspension exceeding 25 cm with S&F additional 2 no. 20 mm dia EI conduit as per GS [C-2/16 ]

Fixing only lamp [C-2/11]

Fixing only ceiling fan complete with blades, canopy, fork, rubber bush etc. incl. S&F connecting wire for down rod upto 30 cm incl. painting the rod with approved paint and making necessary connection as required by 3x1.5 sqmm flexible copper wire[C-3/21(a)]

Supply of 230V AC heavy duty Exhaust fan (EPC Make) of following size with all accessories. (NS)

230mm(9") sweep 1370 rpm

Fixing only exhaust fan after making hole in wall and making good damages and smooth cement finish etc. as practicable as possible and providing necy. length of PVC insulated sheathed copper wire and making connection incl. S & F Al. louver shutter on wall with necy. bolts & nuts (6 mm dia x 62 mm long) (NS)

230mm(9") sweep 1370 rpm [C-4/28(a) & D-14/32(a)]

Supplying and fixing polythene pipe complete with fittings as necy. under ceiling/beam, bound with 22 SWG GI binding wire incl. supplying and drawing 1x18 SWG GI Wire as fish wire inside the pipes and fittings and providing 50 mm dia disc of MS sheet (20 SWG) having colour paint at one face fastened at the load point end of the polythene pipe with fish wire (synchronizing with roof/beam casting work of building construction) [E-2/1]

19mm dia 3mm thick Polythene Pipe [E-2/1(b)]

Cutting channel of 40 mm x 40 mm size on masonry wall incl. S&F heavy gauge polythene pipe dia as stated below, by means of iron hooks and supplying and drawing 18 SWG GI Wire as fish wire incl. mending good damages to building works [E-2/3]

19 mm dia 3 mm thick polythene pipe without earth continuity wire [E-2/3(a)]

Supplying & Fixing sheet metal inspection box (16 SWG) of the following sizes flushed in wall by housing the same after cutting brick wall incl. making earthing attachment, painting and mending good damages to building works [E-4/11]-150 mm x 100 mm x 65 mm [E-4/11(b)]

175 mm x 100 mm x 65 mm [E-4/11(c)]

Supply of 3.5 Core 1.1KV grade PVC/XLPE Insulated Armoured cable with Aluminium Conductor of following sizes [ Make Havells / Fort/ Gloster] [NS}

4 core 50 sq.mm From 100 A Main switch to VTPNDB

4 Core 25 Sq. mm From VTPNDB to PDB

2 Core 10 Sq. mm From VTPNDB to outdoor light

Laying of one No. cable upto 35 sqmm in underground trench 460 mm wide x 760 mm average depth, with brick protection on the top of the cable with 8 (eight) Nos. bricks per metre, including filling the space between the brick & cable and also the trench with shifted soil, leveling up and restoring surface duly rammed [F-2/1(a)]

Laying of cable upto 3/4 core 25 sqmm on wall/surface incl. S & F MS saddles with earthing attachment in 10 SWG GI (Hot Dip) Wire, making holes etc. as necy. mending good damages and painting [F-1/2(b)]

Laying of cable from 3/3½ core 35 sqmm to 50 sqmm on wall/surface incl. S & F MS saddles with earthing attachment in 2 x 10 SWG GI (Hot Dip) Wire, making holes etc. as necy., mending good damages and painting.[F-1/2(c)]

Supplying and fixing compression type gland with brass gland ,brass ring & rubber ring for dust & moisture proof entry for following XLPE / PVC armoured cables.

4 Core 50 Sq. mm [F-4/7(c) ]

4 Core 25 Sq. mm [F-4/7(c) ]

2 Core 10 Sqmm [F-4/7(c) ]

Finishing the end of following XLPE/PVC armoured cables by crimping method incl. supplying and fixing solderless socket (Dowels make), tapes, anticorrosive paste & jointing materials

4 Core 50 Sq. mm [F-5/8(b)(xvi)]

4 Core 25 Sq. mm [F-5/8(b)(xiii)]

2 Core 10 Sq. mm [F-5/8(b)(iii)]

Supplying & fixing medium gauge GI Pipe ( ISI-Medium) Protection with necessary fittings as per GS

50mm dia [F-6/11(d)]

Supply of 45 W LED Street light luminaries (Crompton make CRP-417-45-57-SL-LM-NSG) with all accessories. Or Eqvt make of Philips , Bajaj , Havells as per direction of EIC.[NS}

Supply of 70 W LED Street light luminaries (Crompton make CRP-409-70-57-SL-GL-NSG) with all accessories. Or Eqvt make of Philips , Bajaj , Havells as per direction of EIC.[NS}

Supplying and Fixing GI water proof looping cable box having hinged GI Top Cover having 4 mm thick with rubber gasket lining, railway type mechanical locking arrangement, earthing terminal with lug etc. of the following sizes as indicated below, Comprising of one 250 V, 15 A Kit-Kat fuse unit, one NL on porcelain insulator etc. and housing the same in pole muffing incl. addition and alteration to the existing CC muffing (6:3:1) after dismantling the damaged looping cable box etc. where necy. incl. painting.200 x 150 x 100mm.[I-2/16]

S & F 80mm. (3”) dia x 2 mtrs. Long G.I mini pole (ISI-M) with welded base plate of 225mm. x 225mm. x 6mm. thick with necy. holes for HPSV/LED light fittings incl providing (6:3:1) base block dimension 0.45x0.45x0.60 mtr above from ground leavel cemented 3 mm thick incl 8"x 6"x 4" GI loop box as per direction of E.I.C. including Supply and laying 3 x 1.5 sqmm FRLS copper conductor PVC insulated from loop box to light fittings via Mini pole and Arm bracket including painting of pole and Arm bracket.

Supply & fixing of 40 mm dia, 1.5 mtr long, detachable type M.S single arm bracket provided with header assembly, holes on the header for fixing on pole top,through nut with bolt etc as reqd.

S&F of 40 mm. dia. 0.75 Mts. long G.I. pipe (medium) arm bracket grouted by 4 nos. 5” long GI nut bolt & 2 nos. “U” clamp arrangement on wall with S&F 1 no. 40 mm X 20 mm reducer.as per direction of EIC. [NS]

S & Delivery of 7.5 mtr. ST Pole with base plate and header cap Make: BANSAL/ JINDAL as per GS: Designation: 410-SP79, Overall Length: 7.50Mtr., Plamting Depth: 1.50Mtr., Length of Sections: [Bottom: 4.50Mtrs., Middle: 1.50Mtrs., Top: 1.50Mtrs.], Outside Dia. & Thickness of Section: [ Bottom: 114.3 x 5.4 mm, Middle: 88.9 x 4.85 mm, Top: 76.1 x 3.25 mm] and Approx Weight of pole is 93 Kgs. & additional base plate to be provided ( 3.5 Kg )

Erection of Single Steel tubular pole of length as given below with/without sole plate & Cap etc. in CC foundation (Proportion and dimension indicated below), having 600x600x150 mm thick CC (4:2:1) base block below sole plate/pole with hard jhama metal including CC (6:3:1) muffing 0.30 mts. dia and 0.30 mts. above ground level including 3 mm thick neat cemented finish and GI earth bolt after making drilled holes etc. on pole & carriage of pole upto 1.6 Km from Store to work-site including filling up the excavated earth pit with shifted soil and ramming properly (b) Upto 9.0 mtr. Size 0.6x0.6x1.70 mts. [H-1/1(a)]

Extra on items 1 & 2 above, for providing CC (6:3:1) base block (around the pole) dimension 0.60x0.60x0.76 mt. above ground level, neatly cemented finish (3 mm thick), at the base pole (in lieu of CC muffing) suitable for alkathene/ polythene pipe entry as directed for street light wiring, incl. S & F 25cmx25cmx10cm GI Loop box, 16SWG & incl. drilled hole in pole . [H-1/3(a)(i) ]

Painting of ST Pole with 2 coat of bicolour synthetic enamel paint (Approved make) over 2 coats of RO priming incl. preparation of surface by sand paper/emery paper, cleaning etc. for receiving fresh coat of paint as per direction of EIC [H-2/7 A(a)] Upto 9.0 mtr

S & F 240V single MF-I starter (make L & T) for Outdoor light

Supplying and fixing Sheet steel Main Switches on flat iron frame on wall. 32 A DP (Make-Havells , L&T , Seimens as per direction of EIC.[D-1/1(a)]

Supplying and fixing 415V, 100 A TPN SFU with sheet steel enclosure on angle iron frame on wall with nuts bolts etc incl. S & F 3 nos. DIN type HRC fuse as per rating.(Make-Havells , L&T , Seimens as per direction of EIC.[D-3/4(a)]

S&F outdoor light timer for febricated with double door 8 Way SPNDB as per L&T Cat no-LTSDO8N) i) 240 V, 32A DP MCB of breaking capacity 10KA & ''C'' Charecteristic (L&T)-1no ii) 22A TP power contactor with 220 coil voltage (L&T, Cat no-MNX22-2P, CS90238)-1 No. iii) Digital timer switch (L&T, cat no-Crono 67DDTO)-1no [N/S]-

S& F 230v, 25W, Bright Yard LED Post Top light incl all necy arrangement as per GS.[Make-Magik , Color temp-3000K, Cat No. APBY025W )

Earthing with 50 mm dia GI pipe 3.64 mm thick x 3.04 Mts. long and 1 x 4 SWG GI (Hot Dip) wire (4 Mts. long), 13 mm dia x 80 mm long GI bolts, double nuts, double washers incl. S & F 15 mm dia GI pipe protection (1 Mts. long) to be filled with bitumen partly under the ground level and partly above ground level driven to an average depth of 3.65 Mts. below the ground level as below:By ISI-Medium GI pipe.[G-1/2(a)]

Excavation of soil for installation of Earth Electrode and filling & ramming.For morrum Soil .[G-1/1(b)]

Extra for treatment of soil by using salt & charcoal or coke for plate electrode [G-2/3(b)]

Supplying & fixing earth busbar of galvanized (Hot Dip) MS flat 40 mm x 6 mm on wall having clearance of 6 mm from wall including providing drilled holes on the busbar complete with GI bolts, nuts, washers, spacing insulators etc. as required[G-2/4(b)]

GLOW SIGN BOARD :-Supply and Installation of wall mounting rectangular shape Glow sign board size 7ft x 4 ft x 8" depth made of 25mm x 25mm x 3mm MS flat & 1.5” x 1.5” square hollow pipe combination skeleton structure is to be covered by 20 SWG Aluminum plate in all side except front and back portion. The back portion is covered by 24 SWG GI sheet. The front portion is to be covered by 2mm poly-carbonate Vinyl facia with opted (computerized) matter as per following manner.the vinayl facia is laminated due to long survival of the board. Finally the board will be grouted into the wall by the help 5 no’s 40 x 40 x 6 mm MS angle in required depth. The front portion of the board is to be open by hinged (kabja) system for maintenance of Electrical works. The illumination of the sign board is to be done by S & F 6 no’s 4ft 20W LED patty fittings (Philips make ) along with S & F 15 amp Piano key type control switch with MS box and Bakelite top cover & to be connected by S & F3x1.5 sqmm copper wire as per direction of EIC. the box should be painted one coat of R.O primer & 2 coat of synthetic enamel.The glow sign board will be fixed by 40 X 40X 6 mm MS angle on the top of the building incl all necy items required as per direction of EIC.he lettering in English language as follows: GOVERNMENT OF WEST BENGAL , BAMUNDIHA PHC , BARABAZAR , PURULIA.

MODERN ELECTRICALS (BID ID -7723633)

RAHUL TRADERS (BID ID -7732385)