Construction of Germplasm Resource Network unit under the Research and Development fund of the Deptt. of Genetics and Plant Breeding COA CSKHPKV Palampur. (SH Construction of building (hall) portion only)

Amount

Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in-charge. All kinds of soil including entire carriage of material within all leads & lifts.

Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material including entire carriage of material within all leads & lifts.

Providing form work with steel plates 3.15mm.thick welded with angle iron in frame 30x30x5mm.so as to give a fair finish including centering, shuttering strutting and propping etc. with wooden battens and bellies, height of propping and centering below supporting floor to ceiling not exceeding 4 mtr. and removal of the same for in-situ-reinforced concrete & plain concrete work including entire carriage of material within all leads & lifts. The rate is inclusive of octrai, royality malkana toll tax, GST and all type of other taxes imposed by the Government.

Foundation, footings basis of columns etc. and mass concrete

Columns, pillars, posts and struts square , rectangular or polygonal in plan.

Sides and soffits of beams, beam haunchings, cantilevers, bressumers and lintels not exceeding 1 Mtr. in depth in all heights from floor.

Flat surfaces such as soffits of suspended floors, roofs, landings and the like: floors etc. up to any thickness.

Stair cases with sloping or stepped soffits excluding landing.

Vertical surfaces such as walls (any thickness) partitions and the like including attached pillasters buttresses, plinth and string courses and the like.

Edges of slabs and breaks in floors and walls: Under 20cm.wide.

Providing and laying cement concrete 1:3:6(1 cement: 3 sand: 6 graded crushed stone aggregate 20mm nominal size) & curing complete excluding the cost of centring & shuttering in foundation & plinth by using mechanical mixer including entire carriage of material within all leads and lifts.

Excavation in foundations, trenches etc.in earth work in all kind of soil such as pick work, jumper work including chiseling/wedging work in dry or saturated conditions up to any depth including stacking the excavated soil serviceable and unserviceable materials separately and then in fifteen centimeters layers when required into plinth side of foundation etc. consolidating each deposited layer by ramming and watering and then disposing of all surplus excavated soil, unserviceable material and stacking the serviceable materials as directed by the Engineer-in-charge within all leads & lifts and disposed materials to be neatly leveled. The rate is inclusive of octrai, royality malkana toll tax, GST and all type of other taxes imposed by the Government.

Providing and laying cement concrete 1:4:8(1cement:4 sand: 8graded crushed stone aggregate 40mm.nominal size) Mechanical mixed and curing complete excluding cost of form work in foundation and plinth by using mechanical mixer including entire carriage of material within all leads & lifts. The rate is inclusive of octrai, royality malkana toll tax, GST and all type of other taxes imposed by the Government.

Providing and laying cement concrete 1:1.5:3 (1cement :1.5 sand :3 graded stone aggregate 20mm. nominal size) and curing complete excluding cost of form work and reinforcement for reinforced concrete work with mechanical mixer & vibrator including entire carriage of material within all leads, lifts up to all floor level and heights. The rate is inclusive of octrai, royality malkana toll tax, GST and all type of other taxes imposed by the Government.

Foundation footings bases of columns and the like and mass concrete

Columns, pillars, posts and struts square, rectangular In plan upto all floor level and heights from floor.

Suspended floors roofs, landings and shelves and their supports, balconies, beams, girders, bressumers and cantilevers upto all floor level.

Stair cases (except spiral stair case) excluding landing but including preparing of the surface and finishing of nosing upto all floor level.

Providing mild steel/Tor steel reinforcement for R.C.C. work including bending, binding with binding wire and placing in position complete upto all floor level including entire carriage of material within all leads, lifts up to all floor level and heights. :Tor steel (Amba/Kamdhenu/Jai Bharat Make) The rate is inclusive of octrai, royality malkana toll tax, GST and all type of other taxes imposed by the Government.

Providing and laying cement concrete 1:6:12(1cement:6sand:12 graded crushed stone aggregate 40mm.nominal size) and curing complete excluding cost of centring and shuttering in foundation and plinth by using mechanical mixer including entire carriage of material within all leads & lifts.

Random rubble masonry/polygonal rubble masonry (uncoursed/brought to courses) with hard stones of approved quality in foundation and plinth including leveling up with cement concrete 1:6:12 (1 cement :6 sand : 12 graded crushed stone aggregate 20mm nominal size) at plinth level in Cement Mortar 1:6(1 cement:6 sand including entire carriage of material within all leads & lifts.

Providing & laying 1st.class brick work using common burnt clay building bricks in super-structure above plinth level up to all floor level with cement mortar 1:6(1cement:6sand)including entire carriage of material within all leads, lift upto all floor level & heights. The rate is inclusive of octrai, royality malkana toll tax, GST and all type of other taxes imposed by the Government.

Providing and laying 1st Class half brick masonry using common burnt clay building bricks in super structure above plinth level up to all floor level with hoop iron in cement mortar 1:3(1cement:3sand)including entire carriage of material within all leads, lift upto all floor level & heights. The rate is inclusive of octrai, royality malkana toll tax, GST and all type of other taxes imposed by the Government.

Providing wood work in frames of doors,windows,clerestory,windows and other frames wrought,framed and fixed in position.Sal wood including entire carriage of material within all leads & lifts.

Providing 40x3mm.flat iron hold fast 40cm. Long including fixing to frame with 10mm.diameter bolts,nuts and wooden plugs and embeding in cement concrete block 30x10x15cm,1:3:6 (1cement: 3sand: 6graded crushed stone aggregate 20mm.nominal size) including entire carriage of material within all leads and lifts.

Providing and laying 6mm thick cement plaster to ceiling in Cement mortar 1:3(1Cement:3 Sand ) including entire carriage of material within all leads, lift upto all floor level and heights. The rate is inclusive of octrai, royality malkana toll tax, GST and all type of other taxes imposed by the Government.

Providing and laying 15mm.cement plaster in single coat on the fair side of brick/concrete/stone walls for interior plastering up to all floor level including arrises,internal rounded angles, chamfers and/or rounded angles not exceeding 80mm.in girth and finished even and smooth in cement mortar 1:6(1cement : 6sand) including entire carriage of material within all leads, lift upto all floor level & heights. The rate is inclusive of octrai, royality malkana toll tax, GST and all type of other taxes imposed by the Government.

Providing and laying 15mm.cement plaster in single coat on the rough side of brick/concrete/stone walls for interior plastering up to all floor level including arrises,internal rounded angles, chamfers and/or rounded angles not exceeding 80mm.in girth and finished even and smooth in cement mortar 1:6(1cement : 6sand) including entire carriage of material within all leads, lift upto all floor level & heights. The rate is inclusive of octrai, royality malkana toll tax, GST and all type of other taxes imposed by the Government.

Providing and fixing flush door shutters interior grade, commercial type, core of black-board construction with frame of first class hard wood and well matched commercial ply veneering with vertical grains of cross bands and face veneers on both faces of shutters 40 mm thick including black enamelled M.S. butt hinges including entire carriage of material within all leads & lifts.

Providing and fixing panelled glazed or panelled and glazed shutters for doors,windows and clerestory windows cupboard including bright finished black enameled iron hinges with necessary screws including entire carriage of material within all leads & lifts.

35mm.thick Ist.class deodar wood.

Providing and fixing wire gauge shutters using galvanised M.S. wire gauge of I.S. gauge designation 85 G. with wire of dia 0.56 mm for doors windows and clerestorey windows including bright finished black enamelled iron hinges with necessary screws 35mm thick 1st class Deodar wood including entire carriage of material within all leads & lifts.

Providing and fixing anodized aluminium, sliding door bolt anodized colour and shade with bolts and nuts screws etc. completeincluding entire carriage of material within all leads, lift upto all floor level & heights. The rate is inclusive of octrai, royality malkana toll tax, GST and all type of other taxes imposed by the Government. (Pilot/Sheel make)

300x16mm size

250x16mm size

Providing and fixing aluminium tower bolts (berrel type) anodized transparent or dyed to required colour & shade with necessary screws etc complete including entire carriage of material within all leads, lift upto all floor level & heights. The rate is inclusive of octrai, royality malkana toll tax, GST and all type of other taxes imposed by the Government. (Pilot/Sheel make)

200x10mm size.

100x10mm size.

Providing and fixing aluminium handles anodized transparent or dyed to required colour & shade with necessary screws etc. complete (Pilot/Sheel make)including entire carriage of material within all leads, lift upto all floor level & heights.The rate is inclusive of octrai, royality malkana toll tax, GST and all type of other taxes imposed by the Government.

125mm size

100mm size

Providing and fixing aluminium hooks and eyes 150mm including entire carriage of material within all leads, lift upto all floor level & heights. The rate is inclusive of octrai, royality malkana toll tax, GST and all type of other taxes imposed by the Government.

Providing and fixing aluminium door stopper including entire carriage of material within all leads & lifts. The rate is inclusive of octrai, royality malkana toll tax, GST and all type of other taxes imposed by the Government.

Providing & fixing Homogeneous vitrified tiles (600x600mm x10mm) (Double charge jointless) antiskid water proof stain and impact resistant heavy duty manufactured of approved shade and colour in flooring, treads of steps and landing laid over 12mm thick cement mortar 1:3(1cement:3sand) jointed with cement slurry mixed with pigment to match the shade of tiles as required complete including entire carriage of material within all leads, lift upto all floor level & heights. The rate is inclusive of octrai, royality malkana toll tax, GST and all type of other taxes imposed by the Government. (Kajaria/ Nitco/Somany make)

Providing and laying Coloured printed jointless antiskid floor tiles 6 mm thick in flooring (300 x300mm. size)treads of steps laid on a bed of 12mm. thick cement mortar 1:3(1cement: 3 sand) finished with flush pointing in white cement including entire carriage of materials within all leads and lifts.The rate is inclusive of octrai, royality malkana toll tax, GST and all type of other taxes imposed by the Government. ( Nitco/ Kajaria / Somany make)

Providing and laying coloured glazed digital tiles of approved make 6mm thick (300x450mm or 300x600mm size ) in skirting ,risers of steps on 12mm thick cement mortar 1:3 (1cement:3 sand) and jointed with cement slurry of white cement including entire carriage of material within all leads and lifts.The rate is inclusive of octrai, royality malkana toll tax, GST and all type of other taxes imposed by the Government.( Nitco/ Kajaria Somany make)

Providing and laying granite stone in flooring 20mm(average) thickness base of cement mortar 1:3(1cement: 3 sand) laid over and jointed with grey cement slurry mixed with pigment to match the shade of granite stone including rubbing and polishing complete 20mm thick including entire carriage of material within all leads, lift upto all floor level & heights. The rate is inclusive of octrai, royality malkana toll tax, GST and all type of other taxes imposed by the Government.

Providing under layer for plinth protection of 75mm.thick(unconsolidated) bed dry brick/stone aggregated 40mm.nominal size well rammed and consolidated and grouted with fine sand including preparation of ground including entire carriage of material within all leads & lifts. The rate is inclusive of octrai, royality malkana toll tax, GST and all type of other taxes imposed by the Government.

Providing plinth protection 50 mm thick in cement concrete 1:3:6 (1 Cement : 3 Sand : 6 Graded crushed stone aggregated 20mm nominal size) including entire carriage of material within all leads & lifts. The rate is inclusive of octrai, royality malkana toll tax, GST and all type of other taxes imposed by the Government.

Providing and fixing Steel work welded in built up sections, trusses and framed work,including cutting, hoisting fixing in position and applying a priming coat of red lead paint including entire carriage of material within all leads, lift upto all floor level & heights. The rate is inclusive of octrai, royality malkana toll tax, GST and all type of other taxes imposed by the Government. (Amba/kamdhenu/Jai Bharat make)

In trusses and trussed purlins in building.

In grating framed guard bars,ladders,railing,brackets and similar work.

Providing and fixing 0.60mm thick prepainted steel sheet in roofing with hot dipped metallic zinc coated sheet with top coat of regular modified polyster (RNP) organic coating of 20 microns over 5 microns primer coating to back coat of polyster of 5 microns over 5 microns primer coating including fixing with prepainted iron J or L hooks, bolts and nuts 6mm dia metre with prepainted limpet and rubber washers complete with all accesoriees as required as per the direction of Engineer-in-charge including entire carriage of material within all leads & lifts.The rate is inclusive of octrai, royality malkana toll tax, GST and all type of other taxes imposed by the Government. (Tata Duroshine make)

Providing and fixing MS BP sheet 1.66 mm thick in eaves board /fascia /soffits/ceiling including cutting, fixing and welding to steel roof members & applying a coat of red lead primer complete as per the instruction of Engineer –in- charge (Base members of steel work shall be measured & paid separately) including entire carriage of material within all leads, lift upto all floor level & heights.The rate is inclusive of octrai, royality malkana toll tax, GST and all type of other taxes imposed by the Government.

Distempering (two coats) with oil bound washable ditemper of approved brand and manufacture of and of required shade of undecorated wall surfaces to give an even shade over and including a priming coat with Alkali-resistance primer of approved brand and manufacture after thoroughly brushing the surface free from mortar dropping and other foreign matter and also including preparing the surface even and sand papered smooth including entire carriage of material within all leads, lift upto all floor level & heights. The rate is inclusive of octrai, royality malkana toll tax, GST and all type of other taxes imposed by the Government.(Nerolac/Asian 1st quality make)

Finishing wall with weather proof exterior grade emulsion of approved design (Apexultima) or its equivalent decorated wall surfaces (two coats) to give an even shade and final finish after throughly cleaning the surface to remove all dirt, dust and other foreign matter etc including sand paper smooth complete including entire carriage of material within all leads, lift upto all floor level & heights. The rate is inclusive of octrai, royality malkana toll tax, GST and all type of other taxes imposed by the Government.

Applying priming coat over new wood and wood based surfaces after and including prepering the surface by thoroughly cleaning oil,grease,dirt and other foreign matter) sand papering and knotting Readymixed paint brushing wood primer pink (Nerolac/Asian 1st quality make) including entire carriage of material within all leads & lifts.

Painting two coats(excluding coat) on new wood and wood based surface with enamel paint to give an even shade including cleaning the surface of dirt,dust and other foreign matter,sand papering & stoping With enamel paint other than white (Asian / Nerolac 1st quality make) including entire carriage of material within all leads and lifts.

Painting two coats (excluding priming coat) on new steel and other metal surfaces with enamel paint brushing to give an even shade including cleaning the surface of all dirt,dust and other foregin matters With white enamel paint including entire carriage of material within all leads & lifts.(Nerolac/ Asian 1st quality make)

Providing and fixing M.S. grills of required patterns in wooden frames of windows etc. with M.S. Flats, square or round bars with round headed bolts and nuts or by screws Plain grill including entire carriage of material within all leads, lift upto all floor level & heights.

Providing and fixing stainless steel ( Grade 304) railing upto 90 cm height made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose Only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.) including entire carriage of material within all leads, lifts up to all floor level and heights. The rate is inclusive of octrai,royality malkana toll tax,GST and all type of other taxes imposed by the Government.

Providing edge moulding to 18 mm. Thick granite/ marble /stone/kota stone comities faniture etc(for pre finished nosing in Granite For shelves /steps) including machine polishing to edge to give high class finish complete as per design approved by Engineer in charge for pre finished nosing in Granite For shelves /steps including entire carriage of material within all leads & lifts. The rate is inclusive of octrai, royality malkana toll tax, GST and all type of other taxes imposed by the Government.

BIRENDER SINGH

ABHISHEK KAUL

ANJU DEVI

Nishant Kapoor

Sunita Thakur

Prithvi Raj Government Contracter

RAJNISH KUMAR

CHANDER MOHAN RANA