MGNREGS MATERIAL TENDERING

Amount

Material

Portland Cement

Coarse sand (zone III)

Laterite stone of size 35x20x20cm

Solid blocks of size 30x20x15cm

Structural steel such as tees, angles, channels and R.S. joists

Red oxide Zinc chromate primer

Adjustable telescopic prop 3 m (2.02-3.75m)

Beam clamp 300-380 mm (450-1070 mm)

Stone Aggregate(single size):20 mm nominal size

Stone Aggregate(single size): 10 mm nominal size

Hire charges of Concrete Mixer 0.25 to 0.40 cum with Hopper

Vibrator (Needle type 40 mm)

Twisted steel/deformed bars

Stone Aggregate(single size): 40 mm nominal size

Carriage of Stone aggregate 40 mm nominal size and above

Deharadun white lime

water proofing cement paint

Vitrified floor tile 60x60 cm

Mild steel tubes hot finished welded type

Welding by electric plant

Galvanised wire mesh of average width of aperture 1.4 and nominal dia. of wire 0.63 mm

Wire nails

Mild steel sheets for tanks

Iron pintels including weldded pin

Mild steel sheets with bolts and nuts to rest on pintels

Mild steel hooks

GI trafford profile sheet 0.35mm thick

Bitumen washer

Stainless steel screws 50 mm

Black plastic seat (soild) with lid C.P.brass hinges and rubber buffers

Vitreous china pedestal type wate closet

Flushing Cistern P.V.C. 10 lts capacity (low level) (white) (with fittings, accessories and flush pipe)

PVC pipe 20 mm outer dia 10 kfg/cm2

PVC bend 110 mm dia

PVC pipe 110 mm outer dia. 4kgf/cm2

Areacanut post

Black plastic seat (soild) with lid C.P.brass hinges and rubber buffers

Fine sand (zone IV)

Gravel 1.5 mm to 2 mm

Gravel 5 mm to 10 mm

laterate stone of size 40x20x15cm

MUHAMMED KUTTY P