ANGANVADI RENOVATION AT PALANPUR NAGARPALIKAS AREA

Sr.No Item RATE Units TOTAL QTY Amount

1 Providing and fixing Kitchen sink with C.I. or M.S. 2326.66 No. 5.00

brackets, painted white including cutting holes in walls

and making good the same but excluding fittings. (C)

Vitreous China Sink.(i) 600mm x 450mm x 150mm size

2 Waste Pipe for Wash basin C.P. 40 mm dia 70.18 No. 6.00

3 Providing and fixing C.P. Brass waste for washbasin or 89.83 No. 3.00

sink. (B) 40 mm Dia

4 Providing and fixing 100 mm sand cast iron grating for 36.98 No. 8.00

gully, floor or nahni trap.

5 Providing and fixing M.S. Grills of required 111.36 kg 255.00

pattern with M.S flat at required spacings and

frame alround square or round bars with one

coat of applying priming coat and painting two

coats on grill etc. complete. Plain Grill

6 Dismentaling tiled of stone floors laid in mortar 49.12 Sq.m 406.59

including stacking of serviceable materilas and

disposal of unserviceable materials with all lead

7 Providing and laying Vitrified tiles 8 to 10 mm 1195.02 kg 406.59

thick , 24'' x 24'' in skrting risers of steps and

dedo on 10mm thick cement plaster 1:3 (1-

cement : 3-coarse sand) and jointed with white

8 Removing dry or oil bound distemper by a washing and 11.53 Cu.m 978.75

scraping and sand papering the wall surface smooth

including necessary repairs to scratches complete.

9 Applying two coats of putty & two coats of primer of 40.59 Sq.m 978.75

approved brand and manufacture on new wall surface

to give an even shade including thoroughly brushing the

surface free from mortar dropping and other foreign

matter and sand

papered smooth.

10 Distempeing (Two coats) with oil bound distemper 75.50 Sq.m 978.75

weather Proof of approved brand and manufacture and

of required shade on wall surfaces to give an even

shade, over and including a priming coat with distemper

primer of approved brand and manufacture after

thoroughly brushing the surface free from mortar

dropping and other foreign matter and also including

preparing the surface even and sand papered smooth.

11 Wall painting two coats with weather proof acralic 99.71 Sq.m 774.78

emulsion APEX type paint of approved brand &

manufacture and of required shade on exterior wall

surface to give an even shade over and including a

primery coat with alkaly resistance primer of approved

brand after throughly brushing surface to remove all

dirt and remains of loose powdered materials etc comp.

for all height.

12 Scraping oil paint from steel and other metal surface 51.78 Sq.m 296.46

and making the surface even (with Hand Scraping.)

Sr.No Item RATE Units TOTAL QTY Amount

13 Applying priming coat over new steel and other metel 36.42 Sq.m 296.46

surface after and including preparing the surface by

throughly cleaning, oil,grease, dirt and other foreign

matter and scoured with brushes fine steel wood,

scrapers and sand paper with ready mixed priming paint

brushing red lead.

14 Painting two coats (excluding priming coat) on new steel 91.71 Sq.m 296.46

and other metal surface with enamel paint, brushing,

interior to give an even shade including cleaning the

surface an even shade including cleanicn the surface of

Boxdirt, dustthe

cutting androad

surface tomatter.

proper slope and camber 215.62 Sq.m 3.91

for making a base for road work including removing the

excavated stuff and depositing on the road side slope as

directed upto 50 mts. Lead.

16 LIME .MURRUM BULIDING RUBBISH EARTH MANURE OR 103.26 Sq.m 3.91

SLUDGE & EXECAVATED ROCK AND RUBBISH

(2) EARTH 5 KM LEAD

17 Providing and fixing pre-cast Rubber Dye / steel Dye inter 701.90 Sq.m 34.25

locking concrete block 60mm thick with grade of

concrete M300 pnumatic compressed / vibrated

mechanically and as per approved design Confirming to

IS 15658 : 2006 including 35 mm Sand layer for levelling

and filling the joint with sand in proper line and level as

per guidlines of IRC : SP 63-2018 etc. Complete.

18 Providing and fixing pre-cast concrete kerb stone of gray 374.92 RMT 48.00

cement based concrete block 30cm length,30cm height

and 15cm thick of M250 grade concret as per approved

design and including excavation for fixing in proper line

and level,filling the joint with C:M 1:3 (1cement:3fine

sand) etc complete.

19 Providing erecting and fixing double coated Syntex or 3.95 Ltr. 1000.00

equivalent PVC. (ISI) mark water tank of reqd capacity

each with all necessary fittings & connection etc. comp

20 Half brick masonry in common burnt clay building brick 684.26 Sq.m 0.00

having crushing strenght not less than 35 kg/sq. cm. in

cement mortar 1:4 (1 cement : 4 coarse sand) in

superstructure above plinth level up to floor two level

(b) Conventional

21 Removing and scraping of old deteriorated plaster of 19.89 Cu.m 23.60

any thickness fromm wall / R.C.C member including

stacking of serviceable material and disposal of

unserviceable from site of work with all lead and lift

22 20 mm. thick sand faced cement plaster on wall upto 320.70 Sq.m 66.08

height 10 metres above ground level consisting of

12mm thick backing coat of c.m. 1 : 3 (1 cement :

sand) and 8 mm thick finishing coat of c.m. 1 : 1 (1

cement : 1 sand) etc. complete

Sr.No Item RATE Units TOTAL QTY Amount

23 Providng & fixing mirror polished18 mm thick 3019.90 sqmt 40.14

granite stone framemade out from A granite

stone (in 2pieces to create a offet, 1 of the full

width of the wall & other one with space leaving

for the thickness of the flush door) frame shall

be provided in a manner to create offset to

accommodate the shutter. & shall be fixed to the

wall with cement mortar, aerldite , sand sparying

and drilling , cutting and makin holes for fixing

all door fixtures as directd by EngineerIn Charge.

24 Providing and fixing 35 mm thick shutters for 5338.30 sqmt 46.06

Doors, windows and clerestory windows including

Indian teak wood frames 10 cm x 7 cm. size

including anodized alluminium fixtures and

fastenings including primer coat of approved

quality and two coats of oil painting etc,

complete. (ii) Fully Panelled.

25 Providing and fixing 1.20 Metre high fencing with 391.93 RMT 25.70

2.0 Metre long M.S. Angle posts 40mm x 40 mm

x6 mm and oil painting 3 coats fixed at

Mt,C/c. with five Horizontan lines and two

diagonals of galvanised steel barbed wire

weighting 9.38 Kg. per 100 Metre, strained and

fixed to posts with G.I,staples including fixing

the postsin ground with 0.5 M x 0.5.M x 0.5 M.

block in C.C1:5:10 etc complete.

26 Constructing brick masonry chamber for underground C.I. 2932.93 Nos 1.00

Inspection chamber and bends with bricks having crushing

strength not less than 35Kg/Cm2 in C.M. 1:5 C.I. cover with

frame (Light duty) 455mm x 610mm intenal dimensions total

weight of cover with frame to be not less than 38Kg. (Wt. of

cover 23 Kg.) and Wt. of frame 15Kg. ) (R.C.C. top slabe with

1:2:4 mix (1-cement :2- coarse sand :4-graded stone

aggregate 20mm size) foundation concrete 1:5:10 inside

plaster 15mm thick with cement mortar 1:3 finished smooth

with a floating coat of neat cement on walls and bed concrete

etc. complete.(i) Inside dimensions 455mmx 610mm and

450mm deep for single pipe line.

27 Excavation for pipe line trenches for water supply, 89.89 Cum 3.60

sewerage line, manhole etc. all with shoring and struting

if required as per required gradient and line including

safety provisions using site rails and stacking excavated

stuff including up to all required lead cleaning the site

etc. complete for all lifts and strata as specified.(A) In all

sorts of soil and soft murrum

28 Excavation for pipe line trenches for water supply, 375.72 Cum 0.90

sewerage line, manhole etc. all with shoring and struting

if required as per required gradient and line including

safety provisions using site rails and stacking excavated

stuff including up to all required lead cleaning the site

etc. complete for all lifts and strata as specified.(D)In

hard rock and / or in C. C. 1:2:4 or RCC with blasting,

breaking, chiseling, or by

chiseling/breaking only.

Sr.No Item RATE Units TOTAL QTY Amount

29 Providing and supplying in standard length ISI mark rigid 191.90 Rmt 10.25

unplasticised PVC pipes suitable for potable water with

ring fit joint including cost of rings, as per IS specification

no. 4985/1988 including all local and central taxes,

transportation, freight charges, octroi, inspection

charges, loading, unloading, conveyance to the

departmental stores and including cost of jointing

meterial etc. complete. TEst Pressure 6Kg/cm2.

30 Lowering, laying, fixing and jointing PVC/uPVC/cPVC 17.17 Rmt 10.25

pipes and specials of following class and diameter

including cost of conveyance from stores to site of works

including cost of labour, material, cement solvent, giving

satisfactory hydraulic testing as per ISI code.

31 Refilling the pipeline trenches incl. ramming, watering, 22.22 Cum 3.50

consolidating desposal of surplus stuff as directed within

a radius of 3 km.

32 Painting of various type of Birds, animals cartoons and 1818.00 SMT 48.22

eductional Slogans with oil paint and acrylic Paint on pre

praimered wall with all labour, Materials Colours etc

complate as per drawinds or as directed

33 CPVC 25 MM Providing and fixing concealed center point 253.82 Rmt 30.00

to wall ceiling & floor CPVC (SDR 13.5) PIPE having

National Sanitation Foundation (NSF) seal for potable

water of following dia. nominal bore tube fitting and

clamps including making good the wall, ceiling and floor

etc. complete. [C] 25 mm

34 Providing and fixing screw down bib taps of follwing size 214.81 No. 3.00

(A) Brass screw down bib tap polished bright. (ii) 20 mm

35 Providing and fixing gun metal check or non return 420.63 No. 2.00

fullway wheel valve (C) 25 mm. dia.