Balance portion Repair and Renovation of Office Building of Direcrotate of Command Area Development at Lal Mandi Srinagar. (Additonal Work).

Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 meters lead. For thickness of tiles 10 mm to 25 mm

Demolishing cement concrete manually/by mechanical means including disposal of material within 50 meters lead as per direction of Engineer-incharge: 1:4:8 or leaner mix (i/c equivalent design mix)

Dismantling old plaster or skirting, raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 meters lead.

Dismantling of flushing cistern of all types(C.I/PVC/Vitreous china) including stacking of useful materials near the site and disposal of unserviceable materials within 50 meters lead

Dismantling W.C. Pan of all sizes including disposal of dismantled materials i/c malba all complete as per directions of Engineer-in-Charge.

Dismantling 15 to 40 mm dia G.I. pipe including stacking of dismantled pipes (within 50 metres lead) as per direction of Engineer-in-Charge. (a) Internal Work- Exposed on wall

Dismantling C.I. pipes manually/ by mechanical means breaking lead caulked joints, melting of lead and making into blocks including stacking of pipes and lead at site within 50 meter lead as per direction of Engineerin-charge.Including excavation and refilling trenches after taking out the pipes.Upto 150 mm diameter.

Taking out doors, windows and clerestory window shutters (steel or wood) including stacking within 50 meters lead :Of area of 3 sqm. and below

P/L stone soling (Hand packed) in trenches incl. ramming, dressing ,watering etc. incl. all leads, lifts and carriage upto site of work complete.

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with:1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size)

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)

Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. complete.40 mm thick with 20 mm nominal size stone aggregate.

12mm Cement plaster of mix:1 : 4 ( 1 cement : 4 fine sand) including cost and carriage of material upto site of work compete job.

Providing and laying Vitrified tiles in Walls with different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS: 15622, of approved brand and manufacturer, in all colours and shades, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS: 15477, in average 6 mm thickness, including grouting of joints (Payment for grouting of joints to be made separately). SIZE 1200X600MM

Providing and laying Vitrified tiles in floor with different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS: 15622, of approved brand and manufacturer, in all colours and shades, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS: 15477, in average 6 mm thickness, including grouting of joints (Payment for grouting of joints to be made separately).Size of tile 600x600 mm

Providing and applying white cement based putty of specified thickness, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.2 mm thick

Applying priming coat:With ready mixed pink or grey primer of approved brand and manufacture on wood work (hard and soft wood)

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade, one or more coats on old work.

Engagement of plumber for rectification of fittings etc. as per the directions of EIC at site complete.

Providing and fixing floor mounted, white vitreous china single piece, double traps syphonic water closet of approved brand/make, shape, size and pattern including integrated white vitreous china cistern of capacity 10 litres with dual flushing system, including all fittings and fixtures with seat cover, cistern fittings, nuts, bolts and gasket etc including making connection with the existing P/S trap, complete in all respect as per directions of Engineer-in-Charge.

Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100 mm sand cast Iron P or S trap, 10 liter low level white P.V.C. flushing cistern, including flush pipe (of approved make) with manually controlled device (handle lever) conforming to IS: 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required.White vitreous china Orissa pattern W.C. pan of size 580x440mm with integral type foot rests.

Providing and fixing 600x450 mm beveled edge mirror of superiorglass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.

Providing and fixing 600x120x5mm glass shelf with edges round off supported on anodized aluminum angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs, etc. complete

Providing and fixing of soap dish holder having length of 138mmbreadth 102mm height of 75 mm with concealed fitting

P/F of CP Towel Ring of approved make

P/F of CP towel rod 600mm long of approved make including all accessories complete

Providing and fixing wash basin with C.I. brackets, 15 mm dia CP Brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the walls wherever required:- (a) White Vitreous China Wash basin size 550x400 mm with a 15 mm CP Brass single hole basin mixer

Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings

Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes conforming to IS: 15801, UV stabilized and anti-microbial fusion welded, having thermal stability for hot and cold water supply includingall PP-R plain and brass threaded polypropylene random fittings. This includes testing of joints complete as per direction of Engineer-in charge. Internal work Concealed fixing the pipe with clamps at 1.00 meter spacing including cutting chases and making good the wall etc.

PN-16 pipe , 25mm OD(SDR-7.4)

PN-16 pipe , 32mm OD(SDR-7.4)

PN-16 pipe , 40mm OD(SDR-7.4)

Providing and fixing PPR Unions

PPR Union 32mm

PPR Union 40 mm

Providing and fixing of PVC pipe (Type “B”) in proper gradient.

100mm Dia

75mm Dia

50 mm Dia

100mm Dia Plain Bend

100mm Dia Door Bend

100 mm Plain Tee

100mm Door Tee

100 mm Floor trap(Multi trap)

Floor Trap (75mm)

Reducer 100mm to 75mm

75mm Dia Plain Bend

Reducer TEE 100mm to 75mm

Plain Y 100 mm

Plain Y 75 mm

Half bend 100 mm

Half bend 75 mm

Collar (100 mm)

Collar (75mm)

Cowel 75 mm

Clamps 100 mm Dia

Clamps 75 mm Dia

Providing and fixing of following C.P. fittings/bathroom accessories of approved make (Jaquar/Cera/Hindware etc) (TWO WAY BIB COCK )

Providing and fixing 15 mm nominal bore C.P. stop cock (concealed) of standard design and of approved make conforming to IS : 8931

Providing and fixing 15 mm nominal bore C.P. brass angle valve with CP cup for basin mixer and geyser points of approved make conforming to IS : 8931

Providing and fixing uplasticized PVC connection pipe with brass unions 60 cm length , 15 mm nominal bore

45 cm length , 15 mm nominal bore

60 cm length , 15 mm nominal bore

Providing & Fixing 15 mm dia C.P Wall mixer of approved quality (Non telephonic) of standard design and of approved make complete including C.P. wall flange, cutting and making good the walls wherever required. (jaguar, Hindware , perryware equivalent)

Providing , installation, commissioning and testing Hot water Geyser of approved make (Venus, Racold, Jaguar or equivalent) including fixing with bolts and making necessary connections. 35 lt Capacity

Providing and fixing C.P Fittings i/c cost all necessary fitting complete of approved brand and quality

C.P grating

Waste pipe

C.P Basin waste

Health faucet (jaquar/ Cera) make

CP Nipple

Sub head -1: Point wiring &Accessories point : Wiring for light point / exhaust fan point with (P+N) 2X1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed Conduits, with 6Amp modular switch, modular plate, cover in front and suitable GI box etc of approved quality and make ISO/IEC Certified (quality of wire shall be approved before execution of wok by SITE In-charge Engineer strictly as required) job including cost of Circuit Wire in 2.5Sqmm Multi strand Copper wire from Switch board to D.B complete. excluding cost of Conduits(wire shall be approved before execution of wok by SITE In-charge Engineer strictly as required)

Wiring for Power Plug with (P+N+E) 3 x 4 sq.mm FRLS PVC Insulated Multi strand Copper Conductor single core cable in surface/Recessed Conduit along with 1 x 4 sq.mm FRLS PVC Insulated copper conductor single core cable for loop Earthing of approved quality and ISI marked as required. With. 1NO. 16Amp Modular switch, Modular 1NO.3-PIN. 16 Amp. Socket, Modular plate, cover and suitable GI box etc as required (wire shall be approved before execution of wok by SITE In-charge Engineer strictly as required) complete excluding cost of Conduits.

Supply, Installation, Testing and Commissioning 320 Cu.m/Hr. AC 220-240 Volts, 50 Hz Shutter typed Exhaust fan made out of ABS Plastic Material with inbuilt thermo cut-off Protection and Noise Level not exceeding 37 B of Following Sizes including connection etc. Complete.

Providing and fixing aluminum work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixed with dash fastener of required dia. and size including necessary filling up of gaps at junctions i.e, at top, bottom and sides with required EPDM rubber / neoprene gasket felt etc. Aluminum sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminum snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge (glazing, panelling and dash fasteners to be paid for separately.)

For fixed portion Polyester powder coated aluminum (minimum thickness of polyester powder coated 50 microns)

For shutters of doors, windows & ventilators including providing and fixing hinges / pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately.) Powder coated aluminum (minimum thickness of powder coated 50 microns)

P/F ACP 3mm multi colored (fire retardant) in partitions ceilings, shutters etc incld cost of rubber, neoprene gasket, taping , water proof silicon sealant or as required at site complete job as per EIC

Providing and fixing glazing in aluminum door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineerin-charge. (Cost of aluminum snap beading shall be paid in basic item.) With float glass panes of 5.0 mm thickness (weight not less than 12.50 kg / sqm)

Providing and fixing aluminum casement windows fastner of required length for aluminum windows with necessary screws etc. Complete Powder coated minimum thickness 50 micron aluminum

Providing and fixing aluminum handles ISI marked anodized (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour and shade with necessary screws etc. complete.9.102.3 75 mm

Carraige of material by mechanical Transport including loading unloading etc complete.

Sand for 15 Kms lead from approved source

Stone aggregate for an average lead of 15 Kms from approved source.