Provn of Storage Sheds and Ancillary Buildings at Munakot Phase II

Provn of RCC dunnage for Igloo/ESH (Size 300mm x 300 mm x 200mm )

Total amount of Sch 'A' Part II A (Internal Water Supply) (For details see Sch 'A' in PDF folder)

Total amount of Sch 'A' Part III-A (INTERNAL ELECTRIFICATION) (For details see Sch 'A' in PDF folder)

(a) One light point / fan point / exhaust fan/ bell point/ security light controlled by one one way switch

will be deducted from the total amount arrived, at the time of Acceptance of contract.

S&F LED Tube light fitting 20 Watt surface and wall mounted LED batten, in PVC body, polycarbonate diffuser & integrated electronic driver complete with all accessories internally prewired and incl connecting up three core single wire complete all as spd and directed . Make : HAVELLS : CAT PART No.LHEXAQP7PN1W020, HSN Code 9405, or Crompton : Model - Bright linea,Cat part No. CCS-100-20-65-HL2-DP-NWH, Make : Bajaj, Cat part No. BCLSB 20 2H.

Total amount of Sch 'A' Part IV (Site Clearance and Earthwork) (For details see Sch 'A' in PDF folder)

Total amount of Sch 'A' Part V A (ROAD, PATH & CULVERT) (For details see Sch 'A' in PDF folder)

M&L for applying theromoplastic reflective paint as in edge line marking 100/125/150 width using hot mark thermoplastic paint ( Hot application) white/golden yellow by ingredient, modern propelled road marking machine as directed including all ingredient such as binder glass beads Titanium dioxide calcium carbonate lintar fillers thermoplastic requirement of glass beads shall be as per the table no. 800-4 specification incl spraying of glass beads instruction complete all as directed.

Total amount of Sch 'A' Part VI A (Sewage Disposal) (For details see Sch 'A' in PDF folder)

Total amount of Sch 'A' Part VII A (SECURITY WALL) (For details see Sch 'A' in PDF folder)

S & F of Galvanised steel wire concertina coil of 600 mm dia blade type of 0.60m thick and 65 mm long width 21 mm and 2.5 mm core and blade spacing 100mm fixe in angle iron complete all as specified & directed.

M & L for Precast reinforced cement concrete M30 as boundary wall complete all as specified and directed. all as specified and directed

Total amount of Sch 'A' Part VIII A (AREA DRAINAGE) (For details see Sch 'A' in PDF folder)

M & L for precast cement concrete 1:2:4 Type B-1 (20mm graded agg) as in surface channel and drain etc complete and set in CM 1:4 all as specified and directed .

Total amount of Sch 'A' Part IX (Lightening Protection) (For details see Sch 'A' in PDF folder)

Total amount of Sch 'A' Part XI-A (External Water Supply) (For details see Sch 'A' in PDF folder)

Total amount of Sch 'A' Part XII-A (External Electric Supply) (For details see Sch 'A' in PDF folder)

M&L for sand cushioning with layer of sand 8 cm thick before laying of cable and 15 cm after lying of cable in trenches complete all as specified & directed. Note- Punned thickness of sand will be measured (18 cm) and paid.

Supply , laying, jointing & testing of XLPE (XLPE cable confirming to IS 7098 Part I) insulated ,armoured heavy duty electric cable with aluminium stranded conductor, 1100 volts grade, cross sectional area 150 Sqmm 3.5 core complete all as specified and directed. Note: (i) Cable shall be directly procured from the manufacturer (ii) The end termination joint shall be measured and paid separately under respective items. (iii) Excavation, earth work, sand cushioning and cable cover protection will be measured and paid separately under respective items.

Supply , laying, jointing & testing of XLPE (XLPE cable confirming to IS 7098 Part I) insulated ,armoured heavy duty electric cable with aluminium stranded conductor, 1100 volts grade, cross sectional area 120 Sqmm 3.5 core complete all as specified and directed. Note: (i) Cable shall be directly procured from the manufacturer (ii) The end termination joint shall be measured and paid separately under respective items. (iii) Excavation, earth work, sand cushioning and cable cover protection will be measured and paid separately under respective items.

Supply , laying, jointing

& testing of XLPE (XLPE cable confirming to IS 7098 Part I) insulated ,armoured heavy duty electric cable with aluminium stranded conductor, 1100 volts grade, cross sectional area 50 Sqmm 3.5 core complete all as specified and directed. Note: (i) Cable shall be directly procured from the manufacturer (ii) The end termination joint shall be measured and paid separately under respective items. (iii) Excavation, earth work, sand cushioning and cable cover protection will be measured and paid separately under respective items.

Supply , laying, jointing & testing of XLPE (XLPE cable confirming to IS 7098 Part I) insulated ,armoured heavy duty electric cable with aluminium stranded conductor, 1100 volts grade, cross sectional area 35 Sqmm 3.5 core complete all as specified and directed. Note: (i) Cable shall be directly procured from the manufacturer (ii) The end termination joint shall be measured and paid separately under respective items. (iii) Excavation, earth work, sand cushioning and cable cover protection will be measured and paid separately under respective items.

Supply , laying, jointing & testing of XLPE (XLPE cable confirming to IS 7098 Part I) insulated ,armoured heavy duty electric cable with aluminium stranded conductor, 1100 volts grade, cross sectional area 25 Sqmm 4 core complete all as specified and directed. Note: (i) Cable shall be directly procured from the manufacturer (ii) The end termination joint shall be measured and paid separately under respective items. (iii) Excavation, earth work, sand cushioning and cable cover protection will be measured and paid separately under respective items.

All interconnections between the main bus bar as well as incoming/outgoing feeders shall be carried out with TPN Aluminium bus bar of rating not less then 1.5 times rated capacity of individual outgoing feeders. All control wiring shall be with FRLS PVC insulated 2.5 sqmm multi-stranded copper conductor and shall be properly bunched. The panel board shall have bottom channel of size 75 x 40 mm properly welded with 45 CM long 04 legs of angle iron 50x50x6 mm using 3.15 mm thick CRCA sheet corners to all legs and complete mounted or fixed on PCC foundation above 0.45 mtr on floor and cable connection with suitable size of Aluminum lugs and suitable size of chrome plated brass double compression glands provided for incoming and out-going cables comprising the following :- Make of ACB/ MCCB/MCB/Change over switch: L&T/ABB/LEGRAND/SCHNIEDER/SIEMENS

Supply and fixing Junction box with aluminium bus bar suitable for 3 phase & Neutral , 04 Nos, (RYBN) wire of capacity 100 Amps and MCB 0.5 to 6 amps SPN complete with fixing clamps etc. .

Earthing complete with galvanised steel earth plate electrode 60cm×60cm.× 6mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less'than 1.5 metres below normal ground level, connected to galvanised earth lead wire 4.0mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 connected to earthing test point all as specified or indicated including testing on completion complete all as specified.