Construction of Additional toilet block at Sri Venkateswara Swamy Temple, Kanyakumari, Tamilnadu state.

ORDINARY SOIL (SS20B) Earth work excavating and depositing on bank with initial lead of 10m & initial lift of 2m in Sand, silt or other loose soil, wet sand or silt not under water, light black cotton soil, sandy loam and ordinary soil including excavated earth (SS20B)

Filling of foundations and basement with M-sand in layers of not more than 15 cms. thick each well watered to saturation and consolidated including cost and conveyance of all materials, incidental charges etc., complete.

Cement Concrete (1:4:8) using 40 mm ( 0.54 cu.m), 20mm (0.27 cu.m) and 12 mm (0.09 cu.m) nominal size hard broken granite crushed metal from any source conforming to the relevant ISI standards for foundations etc., laid in layers of not more than 15 cms thick well compacted including curing, ,machine mixing, cost and conveyance of all materials etc., complete.

Filling with useful available excavated earth (excluding rock) in trenches, sides of foundations and basement with initial lead in layers not exceeding 15cm thick, consolidating each deposited layer by watering and ramming including cost and conveyance of water to work site and all operational, incidental, labour charges, hire charges of T&P etc., complete for finished item of work.

Supply and placing of M 25 Design Mix Concrete corresponding to IS 456 using concrete mixer using of 20 mm HBG crushed metal 0.530 cu.m (707 kgs),. 10 mm HBG crushed metal, 0.362 cu.m (471 kgs) , sand 0.407 cu.m (616 kgs.) and cement 380 kgs with water cement ratio of 0.48 ( 182.40 ltrs/ cu.m of CC)etc., to site and including sales & other taxes on all materials including all operational, incidental and labour charges such as machine mixing, vibrating, laying concrete, curing etc., complete with cement from standard suppliers approved by the department but including cost of centering, shuttering charges and excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402).

Note : The design mix shall be got designed by furnishing the information required as per clause 19.1.1 &19.1.2 of IS 456-2000 by the contractor at his own cost and get approved from the competent authority before execution. The cement considered for above M25 grade concrete is 380 kgs/cu.m and the rate is arrived accordingly in the estimate. After the mix is designed and approved, if there is any variation in the quantity of cement, over the cement content adopted in the estimate, the same will be considered and paid/recovered at estimate rate + T.P ( Either increase or decrease in quantity adopted in the estimate). Payment will not be made for variation in the quantity of other materials such as coarse & Fine aggregates.

`- do- Footings

`-do-for Columns up to basement (Pedestals)

- do - for Plinth beams

- do - for Columns

RCC Wall -Below Plinth level (With out centring charges)

-do- Roof beams

`-do- Roof Slabs

Hire charges for centering & scaffolding for unsupported height up to 3.66 M and slab up to 150 mm thick using Steel Scaffolding pipes, jack props, wallers, foot plates, brackets, steel centering plates etc.

HIRE CHARGES FOR CENTERING for RCC vertical walls of plain surface for water sump side walls. Note:The Centering charges for both the faces of the RCC vertical walls of plain surface. The measurement of centering charges shall be in “Sqm” for one face only and the centering charges given are for two faces of centering. (The rate is for both side centring)

Providing High Yield Strength deformed (HYSD)/ Thermo mechancially treated (TMT) steel bars below 36mm Fe500/Fe500D/Fe550 grade (as per IS 1786 - 2008) of different diametres for RCC works, including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars including all wastages such as over laps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying including sales and other taxes on all materials etc., complete for finished item of work in all floors. (APSS NO.126) (In the absence of 18G binding wire,2 nos of 20G binding wire in tandem are to be strictly adhered).

Construction of Brick Masonry in CM (1:6) using Second Class Ground Moulded Chamber Burnt Bricksof size (9" x 41/2" x 3") including curing, cost and conveyance of all materials as directed during execution and complying with standard specifications etc., complete.

Construction of 110 mm thick in CM (1:4) using Second Class Ground Moulded Chamber Burnt Bricksof size (9" x 41/2" x 3") including curing, cost and conveyance of all materials etc,. Complete

Plastering in Cement mortar (1:5) 12 mm thick using best river sand from approved quarry including cost and conveyance of all materials, screening, curing, rounding of corners, incidental charges as directed during execution complying with standard specifications etc., complete,.

Plastering in Cement mortar (1:5) 20 mm thick using best river sand from approved quarry including cost and conveyance of all materials, screening, curing, rounding of corners, incidental charges as directed during execution complying with standard specifications etc., complete,.

Plastering in Cement mortar (1:3) 12 mm thick using best river sand from approved quarry including cost and conveyance of all materials, screening, curing, rounding of corners, incidental charges as directed during execution complying with standard specifications etc., complete,.

Solid PVC Door Shutters using 19 Gauge 19mm MS square tubes for styles and outer frames. 15mm MS square tubes for top, lock and bottom rails. The steel tubes shall be covered with 5mm thick solid PVC Sheets. Shutter using 5mm thick solid PVC Sheets for panelling shall rigidly fixed in position including necessary furniture and fittings. The over all size of styles shall be 50mm x 30mm. The over all size of top rail, lock rail and bottom rail shall be 75mm x 30mm. The over all size of frames shall be 50mm x 45mm with suitable rabate for housing the shutter

Solid panel PVC door with frame

CPVC (Chlorinated Poly Vinyl Chloride) Pipe Higher pressure rating with higher pipe thickness) Standard Dimension Ratio-11.00 etc., complete as per direction of Engineer in charge.

- do - for 40mm dia

- do - for 25mm dia

- do - for 20mm dia

Supply of CPVC specials

- do - 50 mm dia

- do - 25 mm dia

- do - 20 mm dia

- do - 50 mm dia

- do - 25 mm dia

- do - 20 mm dia

- do - 50 mm dia

- do - 25 mm dia

- do - 20 mm dia

- do - 50 mm dia

- do - 25 mm dia

- do - 20 mm dia

- do - 50 mm dia

- do - 25 mm dia

- do - 20 mm dia

Supplying & Fixing white glazed flat back Bowl urinals of size 440 mm x 265 mm x 315 mm with internal flushing rim fixed with screws complete Indian make conforming to IS:2556-1995

European Water Closet with "P" or "S" Trap with Double Flapped Seat and Seat Cover with Brass Hinges and 10 litre capacity PVC Low Level Flusing Tank with all internal fittings - White

PVC low level flushing tank with all internal fittings (wall mounting type) White - 10 litre capacity

Wash Hand Basin of size 550mm x 400mm with all accessories such as Cast Iron Brackets, 32mm dia CP Waste Coupling, Rubber Plug and Chain, 32mm dia 'B' Class GI Waste Pipe, 15mm dia GM Wheel Valve, 15mm dia Nylon Connection, 15mm dia Brass Nipples, 15mm CP Pillar Tap etc,.- White without Pedastal.

Supply of Tower Bolt 100mm long and 10mm dia (with required screws)

Supply of Handles "D" type 100 mm long with required screws

Supply of Aldrop of 200 mm long and 12 mm dia with required screws, bolts and nuts

Supply and fixing CP Long body bib cock fancy type deluxe heavy duty 12.7mm dia Indian make

Supply and fixing CP short body bib cock fancy type deluxe heavy duty 12.7mm dia Indian make

Supply & fixing 31.75 mm dia PVC flexible waste pipe of 914.4 mm length of Ist quality

Supply of Brass Chromium Plated Soap Tray of size 150mm x 100mm

Supply of Brass Chromium Plated Towel Rail 60cm long and 20mm dia with Brackets

Supplying and fixing in position M.S Ornamental grills for windows and ventilators or for veranda openings using M.S. Flats, square rods, angles sheets etc., of approved design including necessary cuttings, bending fabrication, welding, grinding and finishing smooth including painting the grills with Two coats with Synthetic enamel paint over a Primary coat (Red oxide metal primer) (total three coats) of approved make and colour including cost of making the holes into RCC or masonry works and making good the same wherever necessary, including cost and conveyance of all materials, incidental charges etc., complete.

Finishing the sides of walls with Glazed red or white full body ceramic wall tiles of size 300 x 450 mm / 320 mm x 400 mm and thickness 6 mm 1st quality conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs of 1st quality glazed wall tiles of following sizes of approved colour and brands including pointing the joints with the same colour of cement by mixing the same colour pigment in white cement and over a bed of C.M.(1:3), 12 mm thick & Cement slurry of 33 Kg/10sq.m shall be used for fixing bed tiles including cost and conveyance of all materials, curing, incidental charges etc., complete (No separate plastering shall be paid to the walls)

Flooring with Non-skid red or white full body Ceramic floor tiles of Size 300 mm x 300 mm and thickness between 7-8 mm and 1st quality conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and design of 1st quality of all series & shades (as per manufacture specification), set over base coat of cement mortar (1:6) 20 mm thick over CC bed already laid or RCC roof slab, including white cement slurry of honey like consistency spread @ 3.30 kgs per sq.m. jointed with neat cement to full depth mixed with pigment of matching shade, including cost and conveyance of all materials like flooring slab, cement, sand and water etc., complete, for finished item of work.

Supplying and fixing of Fixed Louvered Ventilators made of pre - painted steel (base steel as per IS 513 of -0.58 mm thick 'D" quality, galvanized as per IS 277 with zinc of 120 GSM) primer coated with epoxy primer of 5-7 microns thick, finish painted with a polyester paint of 12-16 microns thick and back coated with 5-7 microns thick alkyd backer, The section for louvered ventilators should be of of 33 x 56 mm Box section paneled with 4 mm pinhead glass with Ethyl propylene Diamine monomer Gasket (EPDM) and the sections cut to length mitre joined with corner bracket . corner brackets made of CRCA with Zinc Phosphate. The frames to be fixed to the concrete /masonry wall by means of self expanding screws including 10 mm square guard bars with 6" pitch complete for finished item of work. - do- Ventilators: Fixed louvers 2'-0" x 2'-0" (609.6 x 609.6 mm)(Box section) outer frame section size of 33 x 56 mm

Painting Two coats for New work with Acrylic Emulsion paint interior grade with silicon additives having VOC ( Volatile Organic Compound) content less than 50 grams/liter over a priming coat of Cement primer interior grade -I (water thinnable) (Total 3 coats) of approved brand and shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc., complete for finished item of work as per SS 911 for internal walls.

Painting Two coats for New work with Acrylic Emulsion paint exterior grade with silicon additives having VOC ( Volatile Organic Compound) content less than 50 grams/liter over a priming coat of Cement primer exterior grade -II (water thinnable) (Total 3 coats) of approved brand and shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc., complete for finished item of work as per SS 911 for external walls.

Providing impervious coat to exposed RCC roof slab surface with CM (1:3), 20mm thick with 500 ml of liquid concentrated micronized cement water proof compound/ 100 ml of Integral cement water proofing admixture complies with IS:2645-2003 of approved make per 50 kg bag of cement laid over roof when it is green including cost of all materials, conveyance charges of materials and all operational, incidental and labour charges for mixing mortar, laying, rendering smooth and thread lining, curing, rounding off junctions of wall and slab etc., complete for finished item.

Manufacture, Supply & delivery of 6.0 Kg/sqcm (PE - 100 Grade) HDPE pipes of OD 160mm conforming to IS: 4984-2016 including transportation to anywhere excluding all taxes and specials etc.complete.(supply up to 90 mm dia in coil & above 90 mm dia straight length)

Supply of PVC Water tank

ORDINARY SOIL (SS20B) Earth work excavating and depositing on bank with initial lead of 10m & initial lift of 2m in Sand, silt or other loose soil, wet sand or silt not under water, light black cotton soil, sandy loam and ordinary soil including excavated earth (SS20B)

Filling of foundations and basement with M-sand in layers of not more than 15 cms. thick each well watered to saturation and consolidated including cost and conveyance of all materials, incidental charges etc., complete.

Cement Concrete (1:4:8) using 40 mm ( 0.54 cu.m), 20mm (0.27 cu.m) and 12 mm (0.09 cu.m) nominal size hard broken granite crushed metal from any source conforming to the relevant ISI standards for foundations etc., laid in layers of not more than 15 cms thick well compacted including curing, ,machine mixing, cost and conveyance of all materials etc., complete.

Filling with useful available excavated earth (excluding rock) in trenches, sides of foundations and basement with initial lead in layers not exceeding 15cm thick, consolidating each deposited layer by watering and ramming including cost and conveyance of water to work site and all operational, incidental, labour charges, hire charges of T&P etc., complete for finished item of work.

Supply and placing of M 25 Design Mix Concrete corresponding to IS 456 using concrete mixer using of 20 mm HBG crushed metal 0.530 cu.m (707 kgs),. 10 mm HBG crushed metal, 0.362 cu.m (471 kgs) , sand 0.407 cu.m (616 kgs.) and cement 380 kgs with water cement ratio of 0.48 ( 182.40 ltrs/ cu.m of CC)etc., to site and including sales & other taxes on all materials including all operational, incidental and labour charges such as machine mixing, vibrating, laying concrete, curing etc., complete with cement from standard suppliers approved by the department but including cost of centering, shuttering charges and excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402).

Note : The design mix shall be got designed by furnishing the information required as per clause 19.1.1 &19.1.2 of IS 456-2000 by the contractor at his own cost and get approved from the competent authority before execution. The cement considered for above M25 grade concrete is 380 kgs/cu.m and the rate is arrived accordingly in the estimate. After the mix is designed and approved, if there is any variation in the quantity of cement, over the cement content adopted in the estimate, the same will be considered and paid/recovered at estimate rate + T.P ( Either increase or decrease in quantity adopted in the estimate). Payment will not be made for variation in the quantity of other materials such as coarse & Fine aggregates.

`- do- Footings

`-do-for Columns up to basement (Pedestals)

- do - for Plinth beams

- do - for Columns

RCC Wall -Below Plinth level (With out centring charges)

-do- Roof beams

`-do- Roof Slabs

Hire charges for centering & scaffolding for unsupported height up to 3.66 M and slab up to 150 mm thick using Steel Scaffolding pipes, jack props, wallers, foot plates, brackets, steel centering plates etc.

HIRE CHARGES FOR CENTERING for RCC vertical walls of plain surface for water sump side walls. Note:The Centering charges for both the faces of the RCC vertical walls of plain surface. The measurement of centering charges shall be in “Sqm” for one face only and the centering charges given are for two faces of centering. (The rate is for both side centring)

Providing High Yield Strength deformed (HYSD)/ Thermo mechancially treated (TMT) steel bars below 36mm Fe500/Fe500D/Fe550 grade (as per IS 1786 - 2008) of different diametres for RCC works, including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars including all wastages such as over laps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying including sales and other taxes on all materials etc., complete for finished item of work in all floors. (APSS NO.126) (In the absence of 18G binding wire,2 nos of 20G binding wire in tandem are to be strictly adhered).

Construction of Brick Masonry in CM (1:6) using Second Class Ground Moulded Chamber Burnt Bricksof size (9" x 41/2" x 3") including curing, cost and conveyance of all materials as directed during execution and complying with standard specifications etc., complete.

Construction of 110 mm thick in CM (1:4) using Second Class Ground Moulded Chamber Burnt Bricksof size (9" x 41/2" x 3") including curing, cost and conveyance of all materials etc,. Complete

Plastering in Cement mortar (1:5) 12 mm thick using best river sand from approved quarry including cost and conveyance of all materials, screening, curing, rounding of corners, incidental charges as directed during execution complying with standard specifications etc., complete,.

Plastering in Cement mortar (1:5) 20 mm thick using best river sand from approved quarry including cost and conveyance of all materials, screening, curing, rounding of corners, incidental charges as directed during execution complying with standard specifications etc., complete,.

Plastering in Cement mortar (1:3) 12 mm thick using best river sand from approved quarry including cost and conveyance of all materials, screening, curing, rounding of corners, incidental charges as directed during execution complying with standard specifications etc., complete,.

Solid PVC Door Shutters using 19 Gauge 19mm MS square tubes for styles and outer frames. 15mm MS square tubes for top, lock and bottom rails. The steel tubes shall be covered with 5mm thick solid PVC Sheets. Shutter using 5mm thick solid PVC Sheets for panelling shall rigidly fixed in position including necessary furniture and fittings. The over all size of styles shall be 50mm x 30mm. The over all size of top rail, lock rail and bottom rail shall be 75mm x 30mm. The over all size of frames shall be 50mm x 45mm with suitable rabate for housing the shutter

Solid panel PVC door with frame

CPVC (Chlorinated Poly Vinyl Chloride) Pipe Higher pressure rating with higher pipe thickness) Standard Dimension Ratio-11.00 etc., complete as per direction of Engineer in charge.

- do - for 40mm dia

- do - for 25mm dia

- do - for 20mm dia

Supply of CPVC specials

- do - 50 mm dia

- do - 25 mm dia

- do - 20 mm dia

- do - 50 mm dia

- do - 25 mm dia

- do - 20 mm dia

- do - 50 mm dia

- do - 25 mm dia

- do - 20 mm dia

- do - 50 mm dia

- do - 25 mm dia

- do - 20 mm dia

- do - 50 mm dia

- do - 25 mm dia

- do - 20 mm dia

Supplying & Fixing white glazed flat back Bowl urinals of size 440 mm x 265 mm x 315 mm with internal flushing rim fixed with screws complete Indian make conforming to IS:2556-1995

European Water Closet with "P" or "S" Trap with Double Flapped Seat and Seat Cover with Brass Hinges and 10 litre capacity PVC Low Level Flusing Tank with all internal fittings - White

PVC low level flushing tank with all internal fittings (wall mounting type) White - 10 litre capacity

Wash Hand Basin of size 550mm x 400mm with all accessories such as Cast Iron Brackets, 32mm dia CP Waste Coupling, Rubber Plug and Chain, 32mm dia 'B' Class GI Waste Pipe, 15mm dia GM Wheel Valve, 15mm dia Nylon Connection, 15mm dia Brass Nipples, 15mm CP Pillar Tap etc,.- White without Pedastal.

Supply of Tower Bolt 100mm long and 10mm dia (with required screws)

Supply of Handles "D" type 100 mm long with required screws

Supply of Aldrop of 200 mm long and 12 mm dia with required screws, bolts and nuts

Supply and fixing CP Long body bib cock fancy type deluxe heavy duty 12.7mm dia Indian make

Supply and fixing CP short body bib cock fancy type deluxe heavy duty 12.7mm dia Indian make

Supply & fixing 31.75 mm dia PVC flexible waste pipe of 914.4 mm length of Ist quality

Supply of Brass Chromium Plated Soap Tray of size 150mm x 100mm

Supply of Brass Chromium Plated Towel Rail 60cm long and 20mm dia with Brackets

Supplying and fixing in position M.S Ornamental grills for windows and ventilators or for veranda openings using M.S. Flats, square rods, angles sheets etc., of approved design including necessary cuttings, bending fabrication, welding, grinding and finishing smooth including painting the grills with Two coats with Synthetic enamel paint over a Primary coat (Red oxide metal primer) (total three coats) of approved make and colour including cost of making the holes into RCC or masonry works and making good the same wherever necessary, including cost and conveyance of all materials, incidental charges etc., complete.

Finishing the sides of walls with Glazed red or white full body ceramic wall tiles of size 300 x 450 mm / 320 mm x 400 mm and thickness 6 mm 1st quality conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs of 1st quality glazed wall tiles of following sizes of approved colour and brands including pointing the joints with the same colour of cement by mixing the same colour pigment in white cement and over a bed of C.M.(1:3), 12 mm thick & Cement slurry of 33 Kg/10sq.m shall be used for fixing bed tiles including cost and conveyance of all materials, curing, incidental charges etc., complete (No separate plastering shall be paid to the walls)

Flooring with Non-skid red or white full body Ceramic floor tiles of Size 300 mm x 300 mm and thickness between 7-8 mm and 1st quality conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and design of 1st quality of all series & shades (as per manufacture specification), set over base coat of cement mortar (1:6) 20 mm thick over CC bed already laid or RCC roof slab, including white cement slurry of honey like consistency spread @ 3.30 kgs per sq.m. jointed with neat cement to full depth mixed with pigment of matching shade, including cost and conveyance of all materials like flooring slab, cement, sand and water etc., complete, for finished item of work.

Supplying and fixing of Fixed Louvered Ventilators made of pre - painted steel (base steel as per IS 513 of -0.58 mm thick 'D" quality, galvanized as per IS 277 with zinc of 120 GSM) primer coated with epoxy primer of 5-7 microns thick, finish painted with a polyester paint of 12-16 microns thick and back coated with 5-7 microns thick alkyd backer, The section for louvered ventilators should be of of 33 x 56 mm Box section paneled with 4 mm pinhead glass with Ethyl propylene Diamine monomer Gasket (EPDM) and the sections cut to length mitre joined with corner bracket . corner brackets made of CRCA with Zinc Phosphate. The frames to be fixed to the concrete /masonry wall by means of self expanding screws including 10 mm square guard bars with 6" pitch complete for finished item of work. - do- Ventilators: Fixed louvers 2'-0" x 2'-0" (609.6 x 609.6 mm)(Box section) outer frame section size of 33 x 56 mm

Painting Two coats for New work with Acrylic Emulsion paint interior grade with silicon additives having VOC ( Volatile Organic Compound) content less than 50 grams/liter over a priming coat of Cement primer interior grade -I (water thinnable) (Total 3 coats) of approved brand and shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc., complete for finished item of work as per SS 911 for internal walls.

Painting Two coats for New work with Acrylic Emulsion paint exterior grade with silicon additives having VOC ( Volatile Organic Compound) content less than 50 grams/liter over a priming coat of Cement primer exterior grade -II (water thinnable) (Total 3 coats) of approved brand and shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc., complete for finished item of work as per SS 911 for external walls.

Providing impervious coat to exposed RCC roof slab surface with CM (1:3), 20mm thick with 500 ml of liquid concentrated micronized cement water proof compound/ 100 ml of Integral cement water proofing admixture complies with IS:2645-2003 of approved make per 50 kg bag of cement laid over roof when it is green including cost of all materials, conveyance charges of materials and all operational, incidental and labour charges for mixing mortar, laying, rendering smooth and thread lining, curing, rounding off junctions of wall and slab etc., complete for finished item.

Manufacture, Supply & delivery of 6.0 Kg/sqcm (PE - 100 Grade) HDPE pipes of OD 160mm conforming to IS: 4984-2016 including transportation to anywhere excluding all taxes and specials etc.complete.(supply up to 90 mm dia in coil & above 90 mm dia straight length)

Supply of PVC Water tank