Construction of a new 2 storied Administrative Building at the premises of NBU 132 KV S/stn of WBSETCL for functioning of the office of the Chief Engineer(OandM-III) and other establishment of WBSETCL

BOCWW CESS @ 1%

BoQ_Ver3.0

Anodised alluminium Aldrop/ sliding bolt of approved quality manufactured from extruded section conforming to I.S. specification( 2681/ 66) fitted and fixed complete.

Bidder Name :

PRICE SCHEDULE (This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only )

NUMBER #

Earthwork in excavation of foundation trenches or drains in all sorts of soil (including mixed soil but excluding laterite or sandstone) including removing, spreading or stacking the spills within a lead of 75m as directed. The items include necessary trimming the sides or trenches, leveling, dressing and ramming the bottom, bailing out water as required complete.

Depth of excavation not exceeding 1.50m

Filling in foundation or plinth by silver sand in layers not exceeding 150 mm as directed and consolidating the same by thorough saturation with water, ramming complete including the cost of supply of sand. (payment to be made on measurement of finished quantity)Do By fine sand

Earth work in filling in foundation trenches or plinth with good earth in layers not exceeding 150 mm including watering & ramming etc. layer by layer complete.

With earth obtained from excavation of foundation

Single brick flat soling of picked jhama bricks including ramming and dressing bed to proper level and filling joints with local sand.

Cement concrete with 30 mm down graded shingles excluding shuttering. N.B. Variety. 1:3:6 proportion

In Ground floor

M.S. works in brackets made from flats, angles, tees etc. to sizes specially bent, twisted, forged; making holes drilled and fitted to rafter of trusses with necessary bolts, nuts, washer or screws etc. (length of straight not less than 230 mm) a) with angles, channels , etc supplied by the contracto

(ii) In 1st floor

(iii) In 2nd floor

(iv) In 2nd floor(mumty)

Extra rate for using water proofing and plasticising admixture @ 0.2 % by weight of cement (or at manufacturers specified rate ) for concrete of various grades.

Ordinary Cement Concrete (mix 1:2:4) with graded stone chips (20mm nominal size) excluding shuttering and reinforcement, if any, in Ground floor. as per relevant IS codes.River Bazree

(i) In Gr floor

(ii) In 1st floor

Brick work with Ist class bricks in cement mortar (6:1 )

(a) In foundation and plinth

(b) (i) In superstructure Gr floor

(ii) In 1st floor

(iii) In 2nd floor

(iv)mumty

125 mm th. Brick work with 1st class brick in cement mortar (1:4) (i) In gr floor.

(ii) In 1st floor

(iii)parapet wall

Supplying and laying polythene sheet (150 gm/ sq.m. ) over damp proof course or below flooring or roof terracing or in foundation or in foundation trenches .(upto 1 st floor)

40 mm thick damp proof with cement concrete (1:1.5:3) wiyh graded stone aggregate 20mm nominal sizewith waterproofing compound of approved brand @ 0.2% weight of cement including cost of materials over two coats of non toxic acrylic polymer modified cementitios waterproofing slurry coat complete .

Reinforcement for reinforced concrete work in all sorts of structures including distribution bars, stirrups binders etc. including supply of rods initial straightening and removal of loose rust (if necessary), cutting to requisite length, hooking and bending to correct shape placing in proper position and binding with 16 gauge black annealed wire at every intersection, complete as per drawing and direction.

a) For works in foundation, basement and upto roof of ground floor/upto 4M. i) Tor steel/Mild steel

(i) In gr floor.

(ii) In 1st floor

(iii) In 2nd floor

Hire and labour charges for shuttering with centering and necessary staging upto 4m using approved stout props and thick hardwood planks of approved thickness with required bracing for concrete slabs, beams, columns, lintels curved or straight including fitting fixing and striking out after completion of works (Upto roof of G.F.).a) 25 mm to 30 mm shuttering without staging in foundation

(i) In gr floor.

b) 25 to 30 mm th wooden shuttering as per dicision and direction of E.I.C.

(i) In gr floor.

(ii) In 1st floor

(iii) In 2 nd floor

Labour for chipping of concrete surface before taking up plastering work

Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off of chamfering corners as directed and raking out joints or roughening of concrete surface including throating, nosing and drip course where necessary .[Excluding cost of chipping over concrete surface] A) With 6:1 cement mortar,

a) 20 mm thick plaster.

(i) In gr floor.

(ii) In 1st floor

(iii) mumty

(iv) In parapet wall

b) 15 mm thick plaster.

(i) In gr floor.

(ii) In 1st floor

(iii) mumty Room

(iv) In parapet wall

B) With 4:1 cement mortar,

a) 10mm thick plaster.

(i) In gr floor.

(ii) In 1st floor

(iii)Mumty Room

Neat cement punning about 1.5mm thick in wall dado, window, sills, floor, drain etc.

Rendering the surface of walls and ceiling with white cement based wall putty of approved make and brand(1.5mm thick)

Applying Interior grade Acrylic primer of approved quality and brand on plastered surface or concrete surface old or new to receive Distemper/Acrylic emulsion paint including scraping and preparing the the surface thoroughly, complete as per manufacture's specification and as per direction of E.I.C.One coat

a) Water based Interior grade Acrylic primer.

(i) In gr floor.

(ii) In 1st floor

(iii) mumty Room

Acrylic Distemper to interior wall, ceiling with a coat of solvent based interior grade acrylic primer (as per manufacturer's specification) including cleaning and smoothning of surface. Two Coats

Applying Exterior grade Acrylic primer of approved and brand on plastered or concrete surface old or new surface to receive decorative textured (matt finish ) or smooth finish acrylic exterior emulsion paint including scraping and preparing the surface thoroughly , complete as per manufacturers specification and as per direction of E.I.C(.One coat)

(i)In Ground Floor

(ii)1st Floor

(iii) In Mumty Room & parapet wall

Providing and fixing exterior quality Aluminium Composite Panel (ACP) wall cladding on existing Al. /MS frame work with GI brackets, ACP fixed on the existing frame work by folding the edges of ACP panel (Engraving the rear surface of ACP sheet) with CP angles, cleats and strainless Steel screws forming groves at the periphery of ACP panel. Such grooves filled with foam and silicon sealant etc. complete with all materials (but including the cost of silicon sealant), labour, scaffolding and all other incidental charges complete in all respect as per specification and direction of Engineer-in-charge. (Mode of payment

i) In Ground floor

ii) In 1st floor

(iii) In parapet Wall and mumty Room

M.S. or Ornamental grill of approved design joints continuously welded with M.S W.I flats and bars of windows railing etc fitted and fixed with necessary screws and lugs in gr floor.Grill weighing above 10 Kg./sq.mtr and up to 16 Kg./sq. mtr.

i) In Ground floor

ii) In 1st floor

Priming one coat on steel or other metal surfacewith synthetic oil bound primer of approved quality including smoothening surface by sand papering.

Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface , if necessary.

a) On timber or plastered surfaceWith super gloss (hi gloss)i) Two coats (with any shade except white)

b) On steel or other metal surface: With super gloss (hi gloss) i) Two coats (with any shade except white)(upto 1st floor with mumty)

Dismantling all types of plain cement concrete work , stacking servicible material at site and removing rubbish as directed within a lead of 75 mm including stacking of steel bars.In ground floor including roof.

a)upto 150 mm thick

Dismantlling all types of masonry excepting cement concrete plain or reinforced,stacking serviceable materials at site & removing rubbish as directed within a lead of 75 M.

In ground floor

Dismantling R.C. floor, roof, beams etc. including cutting rods & removing rubbish as directed within a lead of 75m including stacking of steel bars.

In grond floor.

Supplying fitting fixing C.I.grating heavy type

Above 100 mm and upto150 mm square/ round.

is on finished surface area of ACP) @4mm thick (0.50mm Al.+3.0mm LDPE +0.50mm Al. PVDF coating)

Ordinary Cement Concrete (mix 1:11/2:3) with graded stone chips (20mm nominal size) excluding shuttering and reinforcement, if any, as per relevant IS codes. River Bazree (i) In Ground floor.

ii) In 1st floor

Protective and decorative Acrylic exterior emulsion paint of approved quality as per manufacturers specification and as per direction of E.I.C.to be applied over a coat of acrylic primer as required. The rate includes the cost of material,labour, scaffolding and all incidental charges but excluding the cost of primer. Manufacturer following are the approved manufacturer.Premium 100% Acrylic emulsion. (a) Berger Paint (b) Asian Paint (c) ICI (d) Nerolac (e) Shalimar.Two Coats

Supply ,fitting,fixing of 1st quality Ceramic tiles in walls & floor to match with the existing work & 4 nos of key stones (10 mm 0 fizxed with araldite at the back of each tile & finishing the joints with white cement mixed with colouring oxide if required to match the colour of tiles including roughening of concrete surface if necessary or by synthetic adhesive & grout material etc

i) In Ground floor

ii) In 1st floor

A)In Wall With sand cement mortar(1:3) 15 mm th & 2 mm th cement slurry at back side of tiles using cement @2.91 Kg/sq m & joint filling using white cement slurry @ 0.2 Kg / sqm.Coloured decorative.Area of each tile upto 0.09 Sq m.i)In Ground floor

With application slurry 1.75 kg / sq m ,20 mm sand cement mortar (1:4) & 2 mm th cement slurry at back side of tiles , 0.2 kg / sqm white cement for joint filling and pigment.

a) Deepcolour/ White

i) In Ground floor

ii) In 1st floor

Supply and laying true to line and level 20 mm /25 mm th. Precast roof tiles made of cement concrete with stone chips as per approved strength and density set in 25 mm avg th. Cement mortar (1:3) and filling up joints (3 mm wide ) with cement sand mortar (1:1) applying cement slurry @ 1.75 kg per sqm back of tiles and then setting close the precast tiles , finishing up the joints with slurry already laid and finally finishing the top surface including providing 150 mm high skirting with the same tiles flushed with the inside surface of parapet wall , finishing the mouth of rain water pipe , curving etc. as necessary complete as per direction of the E.I.C

a) For 25 mm th. Precast tiles (cement 14.6 kg /Sqm underlayer)

i) In Ground floor (portico portion)

(ii) In 2nd floor roof with mumty room

Collapsible gate with 40 mm x40 mm x 6 mm Tee as top and bottom guide rail ,20 mm x 10 mm x2 mm vertical channels 100 mm apart in fully stretched position 20 mm x5 mm M.S. flat as collapsible bracing properly rivetted and washered including 38 mm steel rollers including locking arrangement , fitted and fixed in position with lugs set in cement concrete and including cutting necessary holes chasing etc. in walls floor etc. and making good damages complete.

i) In Ground floor

Supplying fitting fixing Fan hook for ceiling with 1 m long 16 mm dia rod complete including mending damages

Anti termite treatment to the top surface of the consolidated earth within plinth walls with chemical emulsion by admixing chloropyrofos emulsifiable concentrates (1% concentration ) with water by weight at the rate of 5 litres per sq,m of the surface before sand bed or sub grade is laid . Holes upto 50 mm to 75 mm deep at 150 mm centre to centre both ways shall be made with 12 mm , diameter mild steel rod on the surface to facilitate saturation of the soil with the chemical emulsion . The work shall be carried out as per specification described in para 6.4 of code IS-6313(part -II) 1981

Wood work in door & window frame fitted & fixed in position complete including a protective coat of painting at the contact surface of the frame excluding cost of concrete , Iron Butt hinges and M.S.Clamp (In Gr floor)

a) Sal (Local)

i) In gr floor

ii) In 1st floor

iii)In Mumty Rooms

Supplying fitting fixing in position of approved P.V.C. door frame (matt finish ) made of extruded P.V.C. multichamber hollow section having dimensions 60 mm x 50 mm x2 mm , horizontal section will be joined with vertical section by galvanuized steel screws after inserting two number steel brackets as reinforcement making suitable space for placing hinges , one steel tube 40 mm x 20 mm x 1.20 mm will be inserted on one full vertical side of the frame ( hinge side ) as reinforcement , the frame will then be fixed in the opening with the help of P.V.C. expanable fastner wooden gutties and galvanised steel screws including cost of all materials and labours , hire charges of tools and appliances, carriage of all materials , taxes and all other incidental charges complete.

PVC door shutter -37 mm thick . Supplying fitting fixing P.V.C door shutter of approved quality & shade in position , the style and rail of the P.V.C. door shutter will be made of rigid P.V.C multicavity hollow chamber of suitable size and section with 2.0 mm wall thickness , the section will have 2 nos built in beads horizontal & vertical section shall be fixed to each other by self tapping screw and 2 nos of solid plastic or M.S. tubular galvanised bracket of length 200 mm x80 mm and other 100 mm x100 mm both 1.20 mm in each corner of shutter frame for placing hinges . Polymer based multicavity hollow section of 105 mm x37 mm with 2.0 mm wall thickness will be fitted in thje middle as lock rail reinforced by solid polymer bar of 200 mm long at both ends & screws for both sides . The section frame will then be fitted in by prepanels of size 100 mm x20 mm with wall thickness 1.2 mm and 2 nos of 6 mm dia bright rods will be inserted horizontally with both side check and nut system and streches where fixing of hinges / hasp bolt / tower bolt / door ring are required to be strong enough to withstand wear and tear . The rate is inclusive of cost of all materials , labour , and hire of tools and plants and appliencies . Carrige of all materials taxes and all other incidental charges complete The rate is exclusive of cost of hinges , hasp bolt , tower bolt ,doo ring etc In gr floor.

Supplying fitting & fixing M.S. clamp for door & window frame made of flat bent bar , end bifurcated with necessary screws etc by cement concrete (1:2:4) as per direction . ( Cost of concrete will be paid seperately.)

i)40 mm x 6 mm , 125 mm length.

Anodised alluminium butt hinges of approved quality manufactured from extruded section conforming to I.S. specification (I.S 205/ 66 ) fitted and fixed with cadmium plated screws.

i) 100 mm x75 mm x4mm

Anodised alluminium barrel/tower/socket bolt (full covered )of approved quality manufactured from extruded section conforming to I.S. 204/ 74 fitted and fixed with cadmium plated screws.

i) 300 mm long x 12mm dia bolt

ii) 100 mm long x 10mm dia bolt

b) 300 mm x 16 mm dia bolt.

Anodised aluminium D type handle of approved quality manufactured from extruded section conforming to I.S specification( I.S 230/72) fitted & fixed complete. (a) With continuous plate base (Hexagonal/ Round rod)

i) 125 mm grip x 10mm dia rod.

Brass floor door stopper

Supplying 'Godrej' mortice lock chromium plated with keys 6 levers includng fitting fixing complete.

Godrej Hydraulic door closer fitted and fixed complete.

a) Heavy type

Supplying solid flush type doors of deluxe decorative (both side) quality, conforming to I:S 2202 timber frame consisting of top and bottom rail and side styles of well seasoned timber 65mm wide each and the entire frame fitted with 27.5mm wide battens places both ways in order to made the door of solid core and internal lipping with teak, mahogony or rose wood approved decorative veneers using phenol formaldehyde as glue etc. complete, including fitting, fixing the shutters in position but excluding the cost of hinges and other fittings in ground floor:

a) 35 mm th. Shutters ( single leaf)

i)In gr floor

ii)In 1 st floor

iii)In mumty

Supplying profiles of reuired section made of Aluminium Alloy extrusions confirming to IS:732-1983 and IS:1285-1975; Annodized (with required film thickness and specified colour /natural) matt finished confirming to IS:1868-1983 for fabrication of composite door,sliding & casement windows,part

ition ,formed of basic section of any ISI embossed/certified make and brand as per direction of Engineer-in-charge.

(A) In 10-12 Micron thicness Annodizing film.,Natural white

a) 4 track sliding window

i) Bottom frame

ii) Top & side frame

a) 4 track sliding window

i) Bottom frame

b) 3 track sliding window

c) Shutter for all track sliding window

i)Bottom & Top member

ii)Style side member

(d)Fixed glazing

i) Top and bottom & side frame

ii) Glazing clip

Labour charge for fabrication and installation of composite door,window,partiotios made from annodized extuded alloy aluminium sections.

(A) Glazed aluminium windows made of extruded and annodized alloy aluminium sections,fabrications,including citting to proper shape and size,drilling and alignment of window shutter frame fitted within built locking arrangements,sliding rollers and other necessary fittings fixture,adhesives and joineries along with extuded neoperine or EPDM gasketing in between window frame and masonary work(wall,column,beanm,lintel etc.)as well as between glass and shutter frame for fixing the glass and poly shulphate sealent and in between shutter and window frame where necessary including cutting to requisite size and fixing glass as per drawing ,specification and direction of E.I.C. The rate includes the hire chjarge of all tools and plants ,including all incidental charges ,adhesive,joineries such as screw,cleate angle etc. but excluded the cost of extruded aluminium section ,glass ,neoprene/EPDM gasketing,locking arrangement and rollers.

ii)In 1 st floor

(a) 4 track sliding window(i) In gr.floor

(b) 3 track sliding window

(i)gr.floor

(ii)In 1 st floor

c) Fixed glazing i)Gr.floor

ii)1st floor

Supplying EPDM gusket of approved make and brand as per direction of Engineer in Charge.

a) U shaped EPDM gasket for frames

Supplying maruti lock (100 mm )

Supplying bubble free float glass of approved make and brand conforming to IS: 2835-1987

i) 6mm th clear

Supplying PVC rollers for sliding windows as per direction of E.I.C

supplying fitting and fixing brass ferrule including connection with G.I pipe of TATA make of following dia and upto 450 mm long with screw , jamnut , socket etc. complete in all respect , including cutting trenches in all sorts of soil and filling up the trenches as per direction of the EIC

i) 25 mm dia

ii) 20 mm dia

Supplying fitting and fixing shower of approved brand and make.

Chromium plated round shower with revolving joint ( Equivalent to code no . 541 (N) & Model - Tropical / Sumthing special of ESSCO or similar brand.

Supplying fitting and fixing gunmetal wheel valve of approved brand and make testedto 21 kg per sq cm

iii) 32 mm

Supplying fitting & fixing bib cock or stop cock.

(a)Chromium plated bib cock short body ( Equivalent to Code no. 511 & Model - Tropical / Sumthing special of ESSCO or similar brand .

(b)Chromium plated stop cock ( Equivalent to Code no. 513 (A) & 513 (B) & Model - Tropical / Sumthing special of ESSCO or similar brand .

c)Chromium plated angular stop cock with wall flange ( Equivalent to Code no. 5053 & Model - Florentine of jaquar or similar brand .

Supplying, fitting and fixing 10 litre P.V.C low down cistern confirming to I.S. specification with P.V.C. fittings complete. C.I. brackets including two coats of painting to brackets etc.

Supplying P.V.C. water storage tank of approved quality with closed top with lid (black) - Multilayer

a) 2000 litre capacity

Labour for hoisting plastic water storage tank.

Above 1500 litre upto 5000 litre capacity.

(i) Upto 1 st story from G.L.

(ii) 1st story to 2 nd story.

Labour for punching hole in plastic water storage tank upto 50 mm dia .

Supplying ,fitting &fixing white vitreous china best quality approved make wash basin with C.I. brackets on 75mmx75mm wooden blocks ,C.P. waste fittings of 32mm dia, one approved quality brass C.P. pillar cock of 15mm dia,C.P. chain with rubber plug of 30mm dia., approved quality PVC waste pipe with CP nut ,32mm dia.,900mm long approved quality PVC connection pipe with heavy brass CP nut including mending good all damages and painting the brackets with two coats of approved paint.

a) 550mmx400mm size

Supplying fitting and fixing pedestral of approved make for wash basin .(White)

Supplying fitting and fixing approved brand P.V.C. connector white flexible with both end coupling with heavy brass c.p. nut 15 mm dia for wash basin .(White)

i) 300 mm long

Supplying fitting fixing cast iron soil pipe only conforming to I.S. 3989 / 1970 and I.S. 1729 / 1964 with bobbins , nails etc. including makng holes in the wall , floor , etc. and cutting trenches etc. in any floor through masonry concrete if necessary , and mending good damages with necessary jointing materials and painting two coats to the exposed surface with approved paint complete

With lead caulked joints.

i) 100 mm dia (Internal)

Supplying fitting fixing cast iron soil pipe only conforming to I.S. 3989 / 1970 and I.S. 1729 / 1964 with bobbins , nails etc. including makng holes in the wall , floor , etc. and cutting trenches etc. in any floor through masonry concrete if necessary , and mending good damages with necessary jointing materials and painting two coats to the exposed surface with approved paint complete

Supplying fitting and fixing H.C.I. bend with door conforming to I.S.S including jointing complete and painting two coats to the exposed surface with approved paint complete.

150 mm dia

Supplying fitting fixing cast iron soil pipe only conforming to I.S. 3989 / 1970 and I.S. 1729 / 1964 with bobbins , nails etc. including makng holes in the wall , floor , etc. and cutting trenches etc. in any floor through masonry concrete if necessary , and mending good damages with necessary jointing materials and painting two coats to the exposed surface with approved paint complete

Supplying fitting and fixing H.C.I. bend with door conforming to I.S.S including jointing complete and painting two coats to the exposed surface with approved paint complete.

Supplying fitting and fixing H.C.I. offset conforming to I.S.S including jointing complete with or without ear (150 mm projection) and painting two coats to the exposed surface with approved paint complete.

Supplying fitting and fixing patent vent cowl I.C.I. conforming to I.S.S and painting two coats to the exposed surface with approved paint complete.

100 mm dia

Supplying fitting and fixing patent vent cowl I.C.I. conforming to I.S.S and painting two coats to the exposed surface with approved paint complete.

Supplying fitting and fixing aluminium domical grating .

Supplying fitting fixing E.W.C. in white glazed vitreous chinaware of approved make complete in position with necessary bolts , nuts etc.

With P trap

Supplying fitting fixing flat back urinal (half stall urinal ) in white vitreous chinaware of approved make complete in position with brass screw on 75 mm x 75 mm x 75 mm wooden block complete necessary bolts , nuts etc.

465 mm x 355mm x 265 mm

Supplying fitting fixing flat back squating plate with integral flushing in white vitreous chinaware of approved make in cement concrete (6:3:1) with jhama chips complete. complete in position with brass screw on 75 mm x 75 mm x 75 mm wooden block complete necessary bolts , nuts etc.

450 mm x 350 mm

Supplying, fitting and fixing best quality Indian make mirror 5.5 mm thick with silvering as per I.S.I. specification supported on fibre glass frame of any colour ,frame size 550mmx400mm.

Supplying fiting and fixing glass shelf with aluminium guard rail. A) Ordinary type with 5.5 mm sheet glass.

i) 450mm x 125 mm

Supplying fiting and fixing soap holder. A) PTMT (Prayag )

Supplying fiting and fixing towel rail with two brackets.

a) C.P. over brass

25 mm dia and 600 mm long.

Supplying fiting and fixing Closet seat of approved make with lead and C.P. hinges , rubber buffer and brass screws complete

Plastic (hollow type ) White

Supplying fiting and fixing 32 mm dia Flush pipe of approved make with necessary fixing materials and camps complete .

i) Polythene flush pipe

Supplying fiting and fixing urinal flush pipe fitting of approved brand.

(a) C.P. urinal flush pipe fitting range of one

Supplying fiting and fixing 18 mm th marble partition slab with chawk doongri marble square cut , both sides polished with two front corners rounded and edges polished .

High pressure polythene ball cock of approved quality with polythene ball and aluminium lever complete for pipe of dia

25 mm dia.

Constructing Inspection pit of inside measurement 600 mm x600 mm x upto 600 mm (depth) with 250 mm th 1 st class brick work in cement mortar (1:4) on all sides, bottom of the pit consisting of 100 mm th cement concrete (1:3:6) with stone chips over a layer of jhama brick flat soling , 15 mm th cement plaster (1:4) to inside walls and outside walls upto G.L.and 20 mm th (1:4) plaster to the bottom of the pit , providing necessary invert with cement concrete (1:3:6) with stone chips as per direction , neat cement finishing to entire internal surface, top of pit covered with 100 mm th R.

C.C slab (1:1.5:3) with stone chips and necessary reinforcement upto 1% and shuttering including 6 mm th cement plaster (1:4) in all external surfaces of the slab and one 560 mm dia R.C.C. manhole cover of approved make supplied , fitted and fixed in the slab with necessary fittings , necessary earthwork in excavation in all sorts of soil , filling sides of the pit with earth and removing spoils after work complete in all respect with all costs of labour and materials.

i) With N.B variety

Construction of septic tank of different capacities as per approved drawing with 1 st class brick work in cement mortar (1:4) including two 560 mm dia R.C.C. manhole cover (heavy duty ) of approved make supplied fitted and fixed in the 100 mm th R.C.C (1:1.5:3) top slab with necessary fitting , 20 mm th cement plaster (4:1) with neat cement finish to the internal surfaces and 15 mm th cement plaster (4:1) to the outside wall upto 200 mm below G.L. floor finished with 25 mm th grey artificial stone over 100 mm th R.C.C. (1:1.5:3) bottom slab including supplying fitting and fixing all necessary specials , fitting S.W. tees , C.I. foot rest etc. including excavation earth in all sorts of soil , shoring , bailing out and pumping out water as necessary , ramming , dessing the bed and refilling the sidesof the tank with earth , removing spoils , filling up the chamber with clear water , removing forign materials from the chamber and including constructig attached inspection pit as per approved drawing and connecting all necessary pipes , joints etc. with internal plaster work and artificial stone flooring is to be done with admixture of water proofing compound @ 0.5% by weight of cement with all cost of labour and materials.

For 100 users i) With N.B variety.

Construction of circular soak well 2.5 M deep in all type of sandy soil with dry brick work upto 1.6 M from the bottom having 150 mm intermediate cement brick work (1:4) band all round and cement brick work (1:4) upto 0.9 m from top with 20 mm th. Cement plastering (1:4) to inside face upto the depth of cement brick work , 15 mm th. cement plaster on outer face from top of well upto G.L. and 6 mm th. cement plaster (1:4) on top of the R.C.C cover slab including filling bottom 1.00 M of inside of the well with brick metal ( 50mm to 63 mm size ) including R.C.C. cover slab of 100 mm th with cement concrete (1:1.5:3) with stone chips with necessary reinforcement and shuttering including one 560 mm dia. R.C.C manhole cover (heavy type ) of approved make supplied , fitted and fixed in the cover slab with necessary fitting , making necessary arrangement for pipe connection , excavation of well including shoring , dewatering and removing the exess earth from the premishes as per direction complete in all respect with all cost of labour and materials .SAIL/RINL/TATA

With 250 mm th. dry brick work and 250 mm th. cement brick work (6:1) and 1.00 m inside dia.

Supply of UPVC pipes (Btype ) & fittings conforming to IS-13592-1992

(A) i) 110 mm Single Socketed 3 m length.

ii) 75 mm Single Socketed 3 m length.

(B) Fittings

i) 110 mm Coupler

ii) Door tee

iii) Bend 87.5

iv) Vent Cowl

Labour charge for fitting and fixing UPVC pipe for above ground work including cost of jointing materials etc. fitting and fixing all necessary specials , cutting pipes , cutting holes in walls or R.c. floor where necessary and mending good all damages excluding the cost of masonry or concrete work if necessary but including the cost of fitting and fixing holder bat clamps or for under ground work including cutting trenches upto 1.5 m and refilling the same complete as per direction of E.I.C

(A) Above ground i) 75 mm dia

ii) 110 mm dia

(B) Under ground 110 mm dia

Supplying, fitting and fixing Stainless Steel railing consist of 38mm dia and 900mm height vertical balustrade at every two alternative steps, 50mm dia top rail, 3 (three ) nos 19mm dia horizontal Strainless steel pipe and base/cover plate with Strainless Steel GRADE 304 containing 7.5% nickle (Interior Grade) Brushed/Mat finish, complete as per direction of the Engineer-in-charge. Weight of Strainless Steel railing per metre 6.5 Kg (approx)

Supplying, fitting and fixing windows and ventilators with or without integrated grills conforming to IS 1038-1975 and manufactured from rolled steel sections conforming to IS 7452-1974 with non-friction projecting type, box type hinges, glazing clips, lugs locking bracket, handle plate etc, including hoisting in position, straightening if required, fixing lugs in cement concrete ( 1:2:4) with stone chips 20 mm down cutting holes and mending gooddamagestomatchwith existingsurface completein allrespect excluding glazing.

(a) Fixed type steel windows as per IS sizes with horizontal glazing bars.

i) Fixed type ventilators as per I.S. sizes with horizontal glazing bars height being limited to 580 mm.

Supplying best Indian sheet glass panes set in putty and fitted and fixed with nails and putty complete. (In all floors for internal wall & upto 6 m height for external wall) 3 mm thick (weighing 7.4 kg/Sq.m)

supplying,fitting & fixing granite slab 15mm to 18mm thick in floor, lobby, stair, landing and treads etc. over 20mm (avg) thick base of cement morter (1:2) laid with white cement slurry @ 4.40Kg per Square meter before placingof graniteand jointed with white cement slurry @2.0Kg persquare meterwith necessary pigments and complete as per direction of Engineer-in-charge including cost of all materials, labours, curing and roughening of concrete surface complete. Area of each granite slab upto 0.60 sqm.

a) Ground floor

b) 1st First floor

c) 2nd floor

Supplying, fitting and fixingstainless steelsink completewith wastefittings and two coats of painting of C.I. brackets.530 mm X 430 mm x 180 mm

Supplying, fitting and fixing PVC pipes of approved make of (medium duty) conforming to ASTMD- 1785 and threaded to match with GI Pipes as per IS : 1239 (Part - I). with all necessary accessories, specials viz. socket, bend, tee, union, cross, elbo, nipple, longscrew, reducing socket, reducing tee, short piece etc. fitted with holder bats clamps, including cutting pipes, making threads,fitting, fixing etc. complete in all respect including cost of all necessary fittings as required,jointing materials and two coats of painting with approved paint in any position above ground. (Payment will be made on the centre line measurements of total pipe line including all specials. No separate payment will be made for accesories, specials. Payment for painting will be made seperately)

a) 25 mm dia

b) 40mm dia

c) 20mm dia

d)50mm dia

Supplying, fitting and fixing cpvc ball valve of approved quality.

a) 20mm dia

b) 25mm dia

c) 40mm dia

d) 50mm dia

Supply CP Hand Shower (Health Faucet) with flexible tube equivalent to Jaguar or similar

B)In Floor With Sand Cement Mortar (1:4) 20 mm thick & 2 mm thick cement slurry at back side of tiles using cement @ 2.91 Kg/Sq.m & joint filling using white cement slurry @ 0.20kg/Sq.m.

Supplying, fitting, fixing, Chain link fencing of approved quality with R.C.C posts wooden posts or iron posts by means of galvanised "C" clips to grid of horizontal strands of galvanised high tensile spring steel wire of 12 S.W.G which have to be tensioned and fixed to the vertical posts by means of galvanised special clips, bolts and nuts etc. 50 x50x8