Site development and protection work for Mata Baglamukhi Ropeway near Pandoh Dam

Amount

Excavation Earth work in excavation by mechanical means(Hydraulic excavator)/ manual means over areas(exceeding 30 cm in depth, 1.5 m in width as well as 10sqm on plan) including getting out and disposal of excavated earth all lead and lift as per direction and satisfaction of Engineer-incharge

Rock Bolting Providing and fixing 25 mm diameter steel rock bolts with resin bond cement capsule anchorage including drilling 35 mm dia holes, inserting grout capsule, driving bolt,fixing 10 mm thick plate washers and nuts and tightening the same by torque wrench after hardening of cement grout, cost of all materials, machinery, labour, ventilation, lighting, drainage and other ancillary operations etc., complete with all lead and lifts as per direction and satisfaction of Engineer-in-Charge.

Self Drilling Anchor Self Drilling Anchor's- Providing and fixing 32 mm diameter steel Self drilling Anchor in slope with resin bond cement capsule anchorage including drilling, inserting grout capsule, driving bolt,fixing end plate washers and nuts and tightening the same by torque wrench after hardening of cement grout, cost of all materials, machinery, labour, ventilation, lighting, drainage and other ancillary operations etc., complete with all lead and lifts as per direction and satisfaction of Engineer-in-Charge.

100 thick Shotcrete with welded wire mesh 100mm thick Cement Concrete Shotcrete in Grade M30 with cement content not less than 418.20 kg per Cum.Shotcreting in two layers (each layers+50mm thickness) for slab duly fixing chain welded wire mesh 100x100x5mm in between the layers including cost and conveyance of all materials, labours heads , lifts seigniorage. centering, scaffolding machine mixing laying concrete with short etc complete as per specification and as directed by Engineer-in-Charge.

M-30 Grade Concrete Providing and laying in position machine batched and machine mixed design mix M-30 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-in-charge.

M-15 Grade Concrete Providing and laying insitu vibrated M-15 ( 28 days cube compressive strength not less than 15 N /mm2 ) grade cement concrete using 40 mm down size approved, clean, hard, graded aggregates with placing and sinking plums of size 80 to 40 mm upto 15 percent for gravity type structures including cost of all materials, machinery, labour, formwork, scaffolding, cleaning, batching, mixing, placing in position, levelling, vibrating, finishing, curing etc.,complete with all lead and lifts as per the direction and satisfaction of Engineer-in-Charge.

Reinforcement (Fe-500D) Steel Reinforcement for R.C.C work ready to use "cut and bend" rebars of approved make from factory/workshop to construction site including placing in position and binding all complete up to plinth level.- Clause no. 5.22B of SOR (H.P.) 2020. Clause 5.22B.1 of SOR (H.P.) 2020.

Providing and laying cement concrete in foundation of retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills,fillets, sunken floor etc., up to floor five level, excluding the cost of centering, shuttering and finishing: 1:4:8 (1 cement : 54coarse sand) : 8 graded stone aggregate 40 mm nominal size) including carriage of material in all lead and lift as directed by Engineer-in-Charge

Centering and shuttering including strutting, propping etc. and removal of form work for :Centering and shuttering including strutting, propping etc. and removal of form work for : Retaining walls, return walls, walls (any thickness) including attached pilasters, buttresses, plinth and string courses fillets, kerbs and steps etc

Providing and laying inclined 75mm dia PVC pipe for weep holes in retaining and breast wall as per all lead and lift as directed by Engineer-in-Charge

SANDEEP KUMAR SHARMA

SUBHASH CHAND KUMAR