ADDL / ALTN CUM SPECIAL REPAIRS TO OFFRS and JCOS/OR MD ACCN AT BAREILLY UNDER GE (W) BAREILLY

Amount

BLDG WORK

M & L for non skid ceremic coloured tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0.18 Sqm but not exceeding 0.36Sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match incl dismantling of tiles including screed bed or bedding layer of 15mm thick in cement mortar 1:6 for laying floor finishes complete all as specified and directed.

All as per serial item No 2 as above but as in vertical surfaces including dismantling of tiles and rendering 10 mm thick in cement mortar 1:4, as in backing layer complete all as specified and directed.

M & L for non- skid ceremic coloured tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match incl dismantling of tiles and screed bed / rendering and screed bed or bedding layer of mortar 15mm thick in cement mortar 1:6 for laying floor finishes complete all as specified and directed.

M&L for vitrified Ceramic tiles light shade 10mm thick (square/rectangular) polished, area of each tiles exec 0.16 sqm and not exceeding 0.36 sqm in floor etc, set and jointed in neat cement slurry and pointed in white or coloured cement and including provn of 15mm thick screed bed 1:6 cement motar including dismantling of floor tiles and screed bed / rendering and hearthing complete all as specified and directed.

All as per serial item no 5 as above but as in vertical surfaces including dismantling of tiles and screed bed / rendering and provn of rendering 10 mm thick in cement mortar 1:4, as in backing layer complete all as specified and directed.

M&L for glazed (plain /coloured) ceramic tiles wall 300x450x7mm thick on vertical faces of walls including 10mm thick rendering in CM 1:3 set jointed in neat cement slurry and pointed in coloured cement to match including taking down old dado/skirting complete all as specified and directed. (Make : Kajaria, Orient, Johnson)

M&L for Providing & injecting chemical for post construction ATT along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc in a portion with cement mortar 1:2 (1 cement : 2 coarse sand) to match the existing apron complete all as specified and directed.

M & L for Post Construction anti termiteTreatment of soil under existing floors using emulsion @ one litre per hole, 300mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2 (1 cement : 2 coarse sand) to match the existing floor complete all as specified and directed.

Taking down chowkats with shutters area not exc 1.5 Sq.m each including making good disturbed portions of wall with new or old bricks, lintel,cills, etc in CM (1:4) complete all as specified and directed.

Taking down chowkats with shutters area exc 1.5 Sq.m each and not exc. 4.00 Sq.m including making good disturbed portions of wall with new or old bricks, lintel,cills, etc in CM (1:4) complete all as specified and directed.

S&F mild steel framed work such as grills grating etc with ends of bars shouldered and/or riveted or forged into spikes framed guard bars, barrel iron doors ladders framed balusters walk ways railing frame work of water tanks and similar work confirming to Fe -290 Gde-E-165 complete all as specified and directed.

M&L providing FACTORY MADE PVC INTERNAL DOOR FRAME (PRELAM) of size 100 mm x 45 mm with a wall thickness of 5 mm (+- 0.25 mm ) made out of extruded 5 mm (+- 0.25 mm ) thick PVC sheet manufactured by an ISO 9001-2008 certified company and by joining 3 nos Heat bent PVC sheet sections. the inside section of size 90x30 mm shall be made from plain colour PVC sheet of 5 mm (+-0.25 mm ) thickness the inside section will be covered by sticking two sections of size 30 x 35 mm and 70 x 45 mm made from (+-0.25) thick plain PVC sheet The frame shall be mitre cut at two corners and joined with 4 nos of 150 mm long brackets of 15 mm x 15 mm MS square tube The two vertical door frames are to be reinforced with 40 mm x 20 mm MS tubes of 19 guage through out the farme The door frame shall be fixed to the wall using 8/100 mm long screw through the frame by using anchor fastners. A minimum of 4 nos screw to be provided for each vertical members and minimum 2 nos for horizontal member etc complete as per manufacturers specifications and directions of engineers-in-charge.

M&L in providing 30 mm thick factory made internal PVC flush door shutter wood free consisting of frame made out of M S tubes of 19 guage thickness and size 20 mm x 40 mm for siles as well as top bottom and lock rail MS frame shall have a coat of metal primer of approved make and manufacturer. The inside panel shall consist of 20 mm thick multichamber hollow PVC section 1 mm wall thickness bonded using solvent cement/ cynoacrylate adhesive with 5 mm (+-0.25 mm) thick plain/prelam PVC sheet manufactured by an ISO-9001-2008 certified company on both side of the inside panel All the four edge of the panel to be sealed with lipping of 10 mm thick and 20 mm wide PVC sheet baton( made by sticking 2 nOs PVC sheet of 5 mm ( +0.25 mm ) thickness using PVC solvent cement adhesive Door edge lipping to be painted with PVC ink of matching colour of plain/prelam moulded PVC sheet of door 0.20 mm thick ( 5mm x 4 mm) thick PVC sheet to be given for lock provision at lock height. Door to be fixed with frame with 3 nos stainless steel butt hinges of size 100 mm * 25 mm * 25 mm and 50 mm long steel screws drilled suitable to pass through both the wall of the MS tube other hardwares should be fixed with 25 mm * 8mm size steel screws etc complete as per direction of engineer-in-charge, manufacturers specification and drawing. Make : Rajshree, Century, Duroplast

S&F for FRP door frame 100mmx50mm made out of 3mm coloured Prelaminated FRP sheet with UV grade polyester Resin complete all as specified and directed.

S&F for 30mm thick FRP door shutters with UV Grade polyester Resin with minimum 3 mm thick coloured prelaminated FRP sheet fixed on both sided complete all as specified and directed. Make : Surya Fibre glass industry, Everest composite pvt ltd, Pyramid FRP door Pune

S&F for 100mm long stainless steel butt hinges complete all as specified and directed.

S&F for 150mm long aluminum anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed.

S&F for 150mm long aluminum handles, cast type anodised complete all as specified and directed.

S&F 125x60mmx2mm thick pressed steel, frames for door with one or more rebates including filing and compaction with PCC (1:3:6) Type C-1, necessary fixing lugs, hinges, lock strike plate, etc, complete including wooden texture finished paint on the frame surface complete all as specified and directed.

S&F 105x60mmx2mm thick pressed steel, frames for door with one or more rebates including filing and compaction with PCC (1:3:6) Type C-1 necessary fixing lugs, hinges,lock strike plate, etc, including wooden texture finished paint on the frame surface complete all as specified and directed.

S&F 35 mm thick Factory made flush shutter, solid core construction with block board core and ply wood face panels, commercial type on both side, complete all as specified and directed.

M & L for 35mm thick plain framed glazed and skeleton shutter open rebated & prepared to receive glass, gauge etc, without sash bar edges of framing plain chamfered or rounded fitted with cut and mitered beads for securing glass etc, of 2nd class hard wood , members of shutters as specified in SSR Part - I Section 8 clause 8.24 (a) fitted to chowkats complete all as specified and directed.

M&L Preparation of old wooden surfaces of any description, not otherwise described over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed..

M&L for preparation and applying two coat varnish on wooden Surfaces of any description, over 10cm in width or girth complete all as specified and directed..

M&L painting to wood and wood based surfaces of any description over 10cm in width or girth with two coats of synthetic enamel paint over a coat of pink primer including preparation of new or previously untreated surface complete all as specified and directed.

M & L preparation of old steel surfaces of any description over 10 cm in width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

M&L for painting to steel surface over 10 cm in width or girth with two coats of synethic enamel paint over a coat of red oxide primer including preparation of newly or previously untreated surface complete all as specified and directed.

S&F for 200mm long aluminum anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed.

S&F for 150mm long Extruded aluminium alloy handles, fabricated type, anodised complete all as specified and directed.

S & F 150 mm long floor door stopper of aluminium alloy body and tongue, brass body and tongue with hard drawn steel spring. Fixed in floor complete all as specified and directed.

S&F 300mm long mild steel sliding door bolts plate type stove enameled black with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate complete all as specified and directed.

S&F for 1.2mm thick aluminum anodised campsule mesh aperture not more than 1 cm fixing with screw in the door for protection of mosquito wire mesh complete all as specified and directed.

S&F galvanised Stainless steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks or galvanesed wire stapels complete all as specified and directed.

S&F for 0.71mm thick Aluminium plain sheeting Alloy 31000 H4, STUCCO Embossed finish with fixed with coach screw and Aluminium washer in roof and wall etc. with end laps stitched with 25x6mm G.I. bolts at 20cm apart including dismantling of old sheeting complete all as specified and directed.

S & F 300 mm size, MS ordinary rat tail rod pattern springs including roller and roller plate complete including fixed to wooden and steel chowkats complete all as specified and directed..

S&F in repairs factory made PVC cupboards frame of the size 75 mm x 40 mm with a wall thicknesss of 5 mm made out of extruded 5mm thick plain/prelam PVC sheet of density 600kg/cbm, having bottom width of 50mm and thickness of 10 mm. All four frame lengths reinforced with 15 mm x 15mm M.S.square tubes of 19 quage thickness throughout the frame and mitre cut at two corners adjointed with 2 nos of 15mm long brackets of 10 mm x 10 mm M.S. square tubes. the door frame shall be fixed to the wall using 8/100 long MS screw through the frame by using PVC fastners. A minimum of 4 nos of screws to be provided for each vertical members and minimum of 2 nos of screw to be provided horizontal members etc. complete as per direction of Engr-in-charge, manufacturer's specification and drawing. Make : Rajshree, Supreme, Century

S&F factory made PVC cupboards flush type shutter of 30 mm thick consisting of frame made out M S tubes of 19 guage thickness and size 19mm x 19 mm for stiles and rails. The inside panels shall consist of 20 mm thick multichamber hollow PVC section of 1mm wall thickness, bonded using solvent cement / cynoacrylate adhesive with 5mm thick plain/prelam PVC sheet, on both sides of inside panels including 75 mm stainless steel hinges, 100 mm long handles and 18/20mm curtain rod not less than .6m long including bracket made of anodised aluminium necessary item to fix the shutters to frame such as and magnetic ball catch for each pair of shutters. all four edges of the panels to be sealed with lipping of 10 mm thick and 20 mm wide PVC sheet baton( made by sticking 2nos PVC foam sheet of 5mm thickness using PVC solvent cement adhesive) complete all as specified and directed. Make : Rajshree, Supreme, Century

S&F in repairs PVC boards 19/20 mm thick any colour as in cabinets incl shelves and shutters, fixed with screws and adhesives as per direction of engr-in-charge and manufacturers instructions including piano hinges , magnet catcher, handles etc complete all as specified and directed.

M& L for 125 mm long Hasp and staple, mild steel, wire type, stove enamelled black, including bolt to hinge plate and fixed with screws complete all as specified and directed.

M & L for Plain Cement Concrete (1:3:6) type C-1 as in bed blocks for fixing hold fast and similar work etc complete all as specified and directed.

M&L for 15mm thick cement plaster on brick surfaces or concrete surfaces in CM (1:4) including taking down old plaster including raking out joints, hacking for key, scrubbing down with water etc., finishing the surface even and fair and necessary scaffolding complete all as specified and directed.

M&L for 15mm thick cement plaster on brick surfaces or concrete surfaces in CM (1:4) finished even and fair and necessary scaffolding complete all as specified and directed.

M&L for 12mm thick cement plaster on brick surfaces or concrete surfaces in CM (1:6) including taking down old plaster including raking out joints, hacking for key, scrubbing down with water etc., finishing the surface even and fair and necessary scaffolding complete all as specified and directed.

M&L for 12mm thick cement plaster on brick surfaces or concrete surfaces in CM (1:6) finished even and smooth without using extra cement and necessary scaffolding complete all as specified and directed.

M & L for rendering 5mm thick on ceiling or concrete surfaces in CM (1:3) finished including taking down old plaster the surface even and smooth without using extra cement and necessary scaffolding complete all as spd and directed.

M&L for white washing three coats to wall surfaces including preparation of newly plastered / untreated surfaces complete all as specified and directed.

M&L white washing three coats to ceiling surfaces including preparation of newly plastered / untreated surfaces complete all as specified and directed.

M&L for applying 2 mm thick layer of birla wall care putty on wall/ceiling surfaces incl rubbing down the surfaces with sand paper after getting dried all as directed to obtain a smooth & even surface complete all as specified and directed.

M&L for Preparation of old decorated surfaces and applying three coat of white wash on ceilings surfaces and rubbing down with sand paper to have even and smooth surfaces complete all as specified and directed.

M & L for applying two coat of distemper oil emulsion white or tinted on old decorated wall surface including preparation of surfaces by washing rubbing down and stoping of distempered and painted surfaces complete all as specified and directed.

M & L for applying two coat of distemper oil emulsion white or tinted on newly decorated or undecorated wall surface including preparation of surfaces by washing rubbing down and stoping of distempered and painted surfaces complete all as specified and directed.

M & L for applying one coat of white wash on old decorated roof surface including preparation of surfaces by washing rubbing down and stoping of distempered and painted surfaces complete all as specified and directed.

M&L for Two coats of cement base paint on new plastered wall surfaces over a coat of primer of any description including preparation of surfaces complete all as specified and directed.

Demolition of brick work or stone/boulder masonry built in cement mortar or cement lime mortar including all quoins, aches, pillars etc but excluding ashlar facing dressed stone work and precast concrete articles complete all as specified and directed.

M&L for brick work with fly ash bricks straight or curved on plan exc 6 m mean radius built in CM (1:6) complete all as specified and directed.

M&L for brick work with fly ash bricks straight or curved on plan to any radius in half brick thick walls built in CM (1:4) complete all as specified and directed.

M & L for cutting chases of hanging chajjas, pinning in, making good to facings where required and pointing in cement mortar (1:3) to ends or edges of sunshades, shelves, lintels, Chajja ( up to IInd floor) etc making good, cutting out exc 10cm and not exc 40cm girth in RCC chajjas in brick walls complete all as specified and directed.

Demolition of reinforced cement concrete, (other than ground floors), shelves, chajjas, slabs and stair case similar work carefully and matching to adjoining disturbed surfaces complete all as specified and directed.

Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed.

M & L for form work to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, opening in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/PCC bands in walls, horizontal or sloping and similar work exc 10 cm but n exc 20 cm wide complete all as specified and directed.

Form work to soffits of suspended slabs flat surface of concrete finished rough surfaces of concrete not exceeding 200mm thick,complete all as specified and directed.

M & L for formwork to chullah hoods, chajjas, trough and similar items including edges finished rough surfaces of concrete complete all as specified and directed.

M & L for formwork to sides and soffits of lintels,lintel bend, beams etc finished rough surfaces of concrete complete all as specified and directed.

M & L formwork to sides of pillars, posts, struts, piers, columns and stanchions square, rectangular finishes rough surfaces of concrete.etc finished rough surfaces of concrete complete all as specified and directed.

S&F TMT bars 10 mm dia and over, cut to length, bent to shape required,including cranking and binding with mild steel wire (annealed) not less than 0.9mm dia. complete all as specified and directed.

ditto- all as per item no 66 above but 6 to 8 mm dia complete all as specified and directed.

S&F TMT bars 5mm and over upto and including 10mm dia in stirrups, spacers and binders bent to shape required,including binding with mild steel wire (annealed) not less than .9mm dia. complete all as specified and directed.

M&L for RCC 1:2:4 type B1 using 20 mm graded stone aggregate as in slab, shelves and stair case etc. complete all as specified and directed.

M&L for RCC (1:2:4) type B-1 (using 20mm graded stone agg) as in beams, cantilevers, lintels, over 1.5 m span complete all as specified and directed.

M&L for RCC (1:2:4) type B-1 (using 20mm graded stone agg) as in columns, pillars, piers, posts and struts complete all as specified and directed.

M&L for RCC 1:2:4 type B1 using 20 mm graded stone aggregate as as in chajjas and like complete all as specified and directed.

Dismantling of concrete by chiseling from RCC members like column , beam, parapet facia, chajja, ceiling,etc exposing the reinforcement without disturbing the reinforcement, free from rust by sand blasting/using chemical , apply a coat of rustolin to remove rust and acralic polymer on old rusted reinforcement providing at places additional reinforcement welding with existing reinforcement as directed wherever required binding RCC with 10 mm gauge welded mesh of aperture 50 mm x 50mm & tack , securing with clips / blinding wire, welding & provision of pressure guniting 2.2 to 2.5 kg /sqm with admixer 1 cement 3.5 of sand of thickness 25 to 40 mm including stripping floating with wooden strippers for proper dimension control neccssary form work & scaffolding up to three storey and including height of head room complete surface of guniting to be finished fair with 10 mm thick plaster in cement mortar 1:4 with water proofing compound @3% by weight of cement and recron 3 S as per manufacturer instruction cleaning & removing of waste meterial etc and applying two coat of Dr fixit /pidilite new coat ezee at interval of 8 hours cure for the surfaces complete all as specified and directed.

Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust etc. complete all as specified and directed.

Demolition of cement concrete (unreinforced) , in any position and paving n.exc. 15 cm thickness( below or above ground level) including tile/ terrazzo floor complete all as specified and directed.

M & L for plain cement concrete 1:3:6 type C-1 (using 20mm graded stone aggregate) as in plinth protection 75 mm thick finished even and fair complete all as specified and directed.

Providing water proofing treatment to RCC sunken slab as specified and directed as under:- (a) Cleaning the existing RCC sunken slab and vertical wall/RCC beam and hacking the surface. (b) 15mm thick plastering over the floor & vertical surface in CM 1:4, mixed with liquid water proofing compound @ 200ml per 50 kg of cement trowelled to even and smooth finish without using extra cement .(Water proofing compound shall be measured and paid separately). (c ) filling the sunken portion with water for 72 hrs and carring out the ponding test.(Any leakage /seapage noticed shall be repaired). (d) Applying two coats of elastomaric acrylic water proof coating Make: Dr. Fixit of pidilite or equivalent per sqm in each coat with roller application complete all as specified and directed.. (Note: Each coat of elastomaric acrylic compound requires 6-8hrs to dry up itself second coat shall be applied on getting the first coat completely dried up.) Make : Dr Fixit, Acrylic Polymer, Dobond Hydro build LW

Supply only liquid waterproofing compound complete all as specified and directed.

M&L for cement concrete type E2 1:5:10 (40 mm graded aggregate) as in mass concrete complete all as specified and directed.

S&F 32mm dia GI pipe, medium grade as in spout pipe in sunken floor complete all as specified and directed.

M&L for PCC (1:2:4) Type B0 using 12.5 mm graded aggregate as in levelling course, haunching, coping and similar works of over RCC roof surface including rounded or chamferred on edges etc complete all as specified and directed.

M&L for 15 mm thick rendering on fair faces of concrete surfaces in CM (1:4) with water proofing compound concrete surface complete all as specified and directed. (NOTE:- WPC shall be measured and paid separatly)

Dismantling of roof terracing cement / brick concrete (un-reinforced) and existing water proofing treatment of any thickness in any position and of any portion from top of roof of building, cleaning surface of roof with wire brush / mechanical brush and with water thoroughly to remove all dust / dirt and loose particles to expose base concrete roof slab and removal of rubbish / demolished material out of MD land complete all as specified and directed.

M&L for 25mm thick cement concrete type B1 (1:2:4) using 20mm graded stone aggregate in floor finishes even and fair to receive floor tiles complete all as specified and directed.

Supply and providing water proofing treatment with polymeric standard water proofing membrane, Aquaflex manufactured by M/s Bengal Bitumen,MULTIPLAS STANDARD, manufactured by STP TEXAS Ltd/Hyperplas manufactured by IWL Ltd having 10 years guarantee for water tightness complete all as specified and directed and described as under :-

(a) Prepartion of RCC roof surface by wire brushing and cleaning top surfaces including flashings and junctions of parapets etc., and applying one coat of polymeric modified bitumen 85/25 @ 1.2 Kg/Sqm over a coat of polymeric primer @ 0.30 Kg/Sqm, all as per manufacture'"s specification complete all as specified and directed.

(b) Supply & providing water proofing treatment with polymeric proofing membrane of 3 Kg/Sqm HYPERPLAS STANDARD/MULTIPLAS STANDARD consisting of 100 micron HMHDPE film centre core including coating he surface with the compatible primer and torch application of membrane with 10 cm overlaps as required thereof, complete all as specified or as directed.

M & L for cement concrete tiles 250 x 250 x 22 mm thick, machine pressed, in floors set, jointed and pointed in neat cement slurry over and including 20mm thick screed bed in CM 1:4 complete all as specified and directed.

M&L for Granite (of any type) tiles 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing and provision of 15 mm thick screed bedding in CM (1:6) including dismantling of existing tiles, hearting etc complete all as specified and directed.

M&L for Granite (of any type) tiles 20mm thick machine cut and machine polished,and moulding, as in window cills, riser of steps and urinal partition wash basin platforms and flooring, skirting/dados like in CM (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of marble and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of marble laid over cement screed and jointed with grey cement slurry mixed with pigment to match including rubbing & mirror polishing including 10mm thick cement plaster on brick surfaces or concrete surface in CM (1:4) finished even and rough as screed including dismantling of wall tile and cement mortar bedding complete all as specified and directed.

M & L for prepolished and single piece 20-22 mm thick machine cut kota stone slab flooring laid on stairs and jointed with grey cement slurry fixed with pigment to match to shade of the slab including rubbing and mirror polishing over and or 20 mm thick bedding layer of CM (1:6) for laying floor finishes even and rough with and including dismantling floor, hearth or wall kota stone slab including cement mortar bedding (but not backing) including removing the rubbish off the premises complete all as specified and directed.

M&L for prepolished and in single piece 20-25 mm thick machine cut Kota stone slab in riser of steps skirting, dado and pillar,landing in single piece with round nosing with three numbers of serration, laid over cement screed and jointed with grey cement slurry mixed with pigment to match including rubbing & mirror polishing ding and inclucding 10mm thick cement plaster on brick surfaces or concrete surface in CM (1:4) finished even and rough as screed including dismantling of wall tile including cement mortar beddingcomplete all as specified and directed.

S&F Mild steel OHT casing, bands, straps, supports or stay, for rain water, ventilating pipes including bolts if reqd, hooks (stay) heavy for large gates hook and pintle large hasps and staple, chains hand made sliding bolts clamps, hold fasts wall ties etc etc hooks for hanging fans plain angle cleats for securing purlins to wood truss or rafter, knee piece inserts, two way and three way straps, plate washer and similar small articles confirming to Fe-290 Gde - E-165 complete all as specified and directed.

S&F 20 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in CM (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed.

Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations complete all as specified and directed.

S&F in repair Vitreous China, semi-pedestal pattern (Anglo-Indian Type) with PVC Cover fixed with PVC Hinges and butterfly jet spray and connections to flushing cistern/pipe complete all as specified and directed.

S&F in repair 10 ltrs capacity (PVC), valve less, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets complete all as specified and directed. Model Sleek fresh dual push of hindware model No Postal size 47.6 cm x 15.5 cm x 32 cm Parryware cat no 8177, Cera cat no B1810110 Fitting snow white.

S&F in repair CP stop valve/angle cock two/one way 15mm dia, cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or union and fixed complete all as specified and directed. Model ARI 39053 of Jaquar hindware model No F320006, Parryware model No G4907A1

S&F in repairs chromium plated fancy type concealed stop cock for 15 mm bore pipe complete all as specified and directed. Model No 8118120 Prayag, ARI-39227 Jaquar, Cera - F1012751, F-4060102

S&F in repairs chromium plated fancy type long body bib taps with cast copper alloy screwed down, screwed for iron pipe or for brass ferrule for 15 mm bore pipe complete all as specified and directed. Model No CON - 107KN Make - Jaquar, 9008 - Prayag, F-3002152-Cera

S&F in repairs 450mm long PVC connection 15mm bore with PTMT nuts complete all as specified and directed.

Taking up or down 15 mm dia steel tubing and connections including cleaning for refixing or removal to store complete all as specified and directed.

S&F for 15mm bore galvanised steel water tubing with all fittings 'medium grade' and fixed complete to wall and ceiling or laid in floors complete all as specified and directed.

Taking up or down 20 mm dia steel tubing and connections including cleaning for refixing or removal to store complete all as specified and directed.

S&F for 20mm bore galvanised steel water tubing with all fittings 'medium grade' and fixed complete to wall and ceiling or laid in floors complete all as specified and directed.

Refixing 15mm dia old steel tubing and connections in new or old position (Walls, ceiling, floors, etc.) complete all as specified and directed.

Refixing 20mm dia old steel tubing and connections in new or old position (Walls, ceiling, floors, etc.) complete all as specified and directed.

S&F fancy Bib tap 15mm dia cast copper alloy chromium plated with crutch or buter fly handle screwed down (Pressed for iron pipe) fixed in repairs complete all as specified and directed. Model No Cera F-3002151, Prayag-8706, Jaquar-CON-047KN

Dismantling water tanks and removing to store capacity exc 250 and not exc. 500 litres complete all as specified and directed.

Dismantling water tanks and removing to store capacity exc 500 and not exc.1000 litres complete all as specified and directed.

S & F 500 ltrs capacity rotational moulded polythylene triple layered water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I and complete all as specified and directed.

S&F Rotational moulded polyethylene triple layered water storage tanks of 1000 Litre capacity (cylinderical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I and complete all as specified and directed.

M&L for disconnecting existing tanks, exc 250 ltr & n.exc 500 ltr setting aside (or lowering if required) for repairs, cleaning,etc and hoisting if required reconnection and re-fixing in position. (cleaning repairing, etc measured separately) complete all as specified and directed.

S&F 15mm bore ball valves high pressure of PTMT with epoxy coated aluminium rod & high-density plastic ball screwed for iron pipe and fixed (Minimum weight 210 gms complete all as specified and directed.

S&F in repairs Vitreous china wash down water closet (pedestal pattern) with seamless flushing cistern square design duroplast slim seat cover, slow falling seat cover size 69x37x77 cm, including connection to drain pipe etc complete all as specified and directed.

S&F in repairs stainless steel kitchen sink with out drainage board of overall size 495x420mm and bowl size 410x330x160mm with lugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe complete all as specified and directed.

S&F stainless steel grating fixed in repairs complete all as specified and directed.

S&F towel rail cast copper alloy, chromium plated 600mm long with bracket in repair complete all as specified and directed.

S & F stainless steel plate rack not less than 5 Kg of size 31"X36"X10" complete all as specified and directed. Make :- Silvershine SSK-135, BSKPR-315 bluestar.

S&F in repairs vitreous chinaware coloured wash hand basin with pedestal of size 55X40X82cm complete including fancy CP pillar tap, CP Waste coupling ,waste pipe ,complete fixing arrangement and cutting for and pinning in walls & making good complete all as specifed and directed. Make : WHB - Cat No 10072, Pedestal- Cat No. Ped 11029 Neptune of Hindware ,Parryware Cat No C0480 (SP) 181/CTH ,C 0375 pedestral, Cera Cat No 2090107Ped , Cat No S 2040112 WHB

S & F in repair chromium plated shower rose with or without swivel joints, any size, including fixing to steel pipe or union size 125 mm complete all as specifed and directed. Make: F 7010305 of Cera, Hindware Model No F160006 , Parryware Model No T9985 A1 complete all as specified and directed.

S&F in repairs brass chromium plated wall mixer 3 in 1, 15mm for mixing hot & cold water screwed down three joints to steel pipes or union & plugging and screwed to wall complete all as specified and directed. Model No - Cat No FUS29281 Fusion of Jaquar, F-390022 Hindware, G0216A1 Parryware.

S&F brass chromium plated wall mixer 3 in 1, 15mm for mixing hot & cold water screwed down three joints to steel pipes or union & plugging and screwed to wall complete all as specified and directed. Model No - Cat No FUS29281 Fusion of Jaquar, F-390022 Hindware, G0216A1 Parryware.

S&F 15 mm dia brass CP health faucet with 1 mtr long and flexible tube and wall hook screwed for iron pipe fancy type long body and hanging arrangement complete all as specified and directed. Model No - ALD573 of Jaquar, Hindware F160002, Parryware T9961A1.

S&F in repairs 75 mm x 32 mm dia chromium plated waste fitting special size suitable for stainless steel sinks including PVC flexible waste pipe of approved quality complete all as specified and directed.

S&F in repairs kitchen sink with double bowl with drain board made of stainless steel 1 mm thick with plugs washers and waste pipe and coupling including bedding in cement mortar on dwarf walls including brackets and connecting union to pipe overall size of sink 1372x457 mm and bowl size 405x355 mm complete all as specified and directed. Make : Cera / Parryware / Kaff

S&F fancy type glass corner 300 mm radius of 10 mm thick toughened glass with CP railing fixed with fancy type screws complete all as specified and directed. Model No - ACN-1173 of Jaquar, Parrware T-6010A1, Cera F505101

S&F in repairs brass chromium plated wall mixer 2 in 1, 15 mm for mixing hot & cold water screwed down three joints to steel pipes or unions plugging and screwed to walls complete all as specified and directed. Model No - Cat No FUS-29273, UPR of jaquar, Hindware F-390020, Parryware G0216A1

S&F brass chromium plated wall mixer 2 in 1, 15 mm for mixing hot & cold water screwed down three joints to steel pipes or unions plugging and screwed to walls complete all as specified and directed. Model No - Cat No FUS-29273, UPR of jaquar, Hindware F-390020, Parryware G0216A1

S&F low density polyethene pipes (LDPE) 32mm of pressure rating 6 Kg/cm2 fixed to walls complete all as specified and directed.

S&F MS PVC coated Curtain Rod 25 mm dia 1.8mm thick of approved quality with two number decorative design as approved 3 mm thick brackets fixed in brick/concrete wall and same finished knobs on each end of curtain rod complete all as specified and directed.

S&F in repairs of 20mm dia Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed.

Taking up or down AC/PVC rain water pipe, soil/waste/vent pipe of any size with fittings etc complete all as specified and directed.

S & F PVC (SWR) 110 mm dia soil waste or rainwater drainage pipes single socketed in any length with rubber ring joint laid in floor or fixed on wall complete all as specified and directed.

S & F sand cast iron soil, waste and vent pipe, 75mm bore, in any length with or without ear with cement joint fixed to walls complete all as specified and directed.

M & L 75 mm dia cast Iron Nahani trap with CP grating including jointing to waste pipe fixed in plain cement concrete type B1 (1:2:4) using 20 mm graded stone aggregate as in repairs complete all as specified and directed. Make : Dharam Engineering, Hetech Metal casting Pvt Ltd, Dipra Enterprise

S&F 100mm bore CI soil waste / vent pipe (spun type) in any length with or without ears with cement joint to wall with stack clamps out of 110mm by 5mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing end of stays to wall or roof etc.all as specified including black japan paints complete all as specified and directed.

S&F 75 mm bore CI bends (any radius) diminishing pieces or tapers (larger bore mesured) with oval access door complete all as specified and directed.

S&F CI 75 mm bore branch piece single (equal or unequal) ordinary or inverted (spigot or shocket type) or with parallel branches with oval access door complete all as specified and directed.

S&F 100mm bore CI bends (any radius) diminishing pieces or tapers (larger bore mesured) with oval access door complete all as specified and directed.

S&F CI 100mm bore branch piece single (equal or unequal) ordinary or inverted (spigot or shocket type) or with parallel branches with oval access door complete all as specified and directed.

S & F PVC (SWR) 110 mm bore bends complete all as specified and directed.

S & F PVC (SWR) 75 mm bore bends complete all as specified and directed.

M&L for Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out complete all as specified and directed.

Dismantling of Bricks (laid flat or on edge) or brick tiles in floors, channels, kerbs, aprons, etc. (each layer) complete all as specified and directed.

M & L for 75mm thick plain cement concrete type D-2 (1:4:8) (40 mm graded stone aggregate) as in sub base complete all as specified and directed.

M&L for machine pressed cement concrete factory made coloured glazed interlocking paver block any shape and size confirming to IS-15658-2006 of 60 mm thickness, M-35 grade, fixed with grey cement & pigment of approval design and pattern laid over a layer of 25 mm thick sand cushioning including filling the joint with sand complete all as specified and directed. Make : Nitco, Mumbai Redsun tiles, M/s Mehtab Tiles

M&L for PCC Kerb stone outer coloured surface machine pressed factory made of size 150mm long 100mm wide and 350mm deep in PCC (1:2:4) type B-0 using 12.5 mm grade stone aggregate, jointed in CM (1:4) complete all as specified and directed.

M&L for providing cement concrete (1:2:4) type B1 (using 20 mm graded stone aggregate) as in benching, coping, bed blocks including necessary form work, weathering slightly rounded or chamfered angles and throating, complete all as specified and directed.

Cleaning of roof/ walls of buildings including complete removal plants grown with roots and treated with lime and filling the hole properly by CM 1:3 complete all as specified and directed.

S&F powder coated aluminium anodised frame for doors windows, ventilators and kitchen cupboards frame with one or more rebates including joining cleat for fixing etc. complete all as specified and directed. (minimum thickness of powder coating 50 micron).

S&F in ALCO panel 3 mm sheet of any colour or shade complete all as specified and directed.

M&L Peg set of six Aluminium alloy body complete all as specifed and directed.

M&L for Stainless steel floor trap Anti cock roach proof Trap complete all as specified and directed.

S&F aluminium power coated (colour) section as in kitchen cabinet/ cupboard shelf incl hanging self for clothes with aluminium clip/strips, pvc beadings fixed with adhesive on edging window,ventilator,glazed with aluminium shutter(medium weght) of suitable size, one or more rebate,cut to jointed together with cadmium plated steel screws including rubber bending or gasket for aluminium sections for fixing glass/Xpm jalli and necessary fittingd,screws, plugs for fixing screws, etc complete all as specified and directed. (Aluminium section shall be of make Jindal/Hindalco/Indalco). Note : Only weight of aluminium will be measured and rubber beading cost will be covered in the aluminium rate.

S&F for powder coated aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) each shutter complete all as specified and directed.

M&L for 6mm thick bakelite sheet prelaminated both side with decorative choice lamination work complete all as specified and directed.

S&F of steel windows with pressed steel frame (size 95x45x1.25mm) side hung shutter including box type hinges with steel handle, and steel peg stay complete with glazed openable shutter with glazing bar(open out side) and wire gauged openable shutter without glazing bar(open inside), dovetailed or welded complete all as specified and directed and all as per Drg No TD/088 dt 07 Jan 2002 NOTE :- (i) Two shutter ie wire gauged and glazed shall be fixed in one composite frame and both shutter shall be measured as one unit. (ii) Rate for filling of PCC in frame deemed to be included in quoted rate. (iii) MS grill shall be measured and paid separatly under relevant item of schedule

S&F for steel ventilators fixed type with glazing bars complete welded including red oxide and painting complete all as specified and directed.

S&F sheet glass 3mm thick ordinary quality and glazing with oil putty in square exc 0.5 Sqm each pane complete all as specified and directed.

S&F sheet figured glass 3mm thick ordinary quality and glazing with oil putty in square n. exc 0.5 Sqm each pane complete all as specified and directed.

S&F galvanised Stainless steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks or galvanesed wire stapels complete all as specified and directed.

S&F UPVC Frame with windows thickness 1.2 mm +.25 made out of extruded section plain UPVC sections. The window frame out of rigid UPVC section meter cut at 4 Corners & joint with plastic fusion welding with internal reinforcement required. The shutter section made out of extruded rigid UPVC with internal reinforcement including provision of 5 mm wire mesh, 5mm thick glass, hinge , tower bolt, handle as per requirement in each shutter complete. The window shall be fixed to the wall using 65x100mm long fasteners at suitabe place provided for each vertical and horizontal member etc. including hinges, Aluminum handle , locking arrangements complete all as specified and directed. Note:- MS grill shall be measured and paid seperatly under relevant item of schedule Make : RK framing UPVC Private Ltd, Xindo Window Pvt Ltd, Shakti Steel

S&F UPVC ventilator with top hang shutters with frames including provision of 5 mm wire mesh, 5mm thick glass, hinge , tower bolt, handle as per requirement.The window shall be fixed to the wall using 65x100mm long fasteners at suitabe place provided for each vertical and horizontal member etc. including hinges, Aluminum handle , locking arrangements complete all as specified and directed. Note:- MS grill shall be measured and paid seperatly under relevant item of schedule

S&F in repairs for Solid PVC frame (Single Rebated) of size 100mm x 60mm made out of solid PVC foam with homogenous fine cellular structure having smooth outer integral skin with suitable metal stiffner and fixed with 100 x 8 sheet metal CSK screws complete all as specified and directed. (Note :- Door frame shall be water proof, termite proof, elegant and should have excellent screws holding strength to fix hinges and hold doors properly for a long life)

S&F in repairs for Solid PVC frame (double Rebated) of size 125mm x 60mm made out of solid PVC foam with homogenous fine cellular structure having smooth outer integral skin with suitable metal stiffner and fixed with 100 x 8 sheet metal CSK screws complete all as specified and directed. (Note :- Door frame shall be water proof, termite proof, elegant and should have excellent screws holding strength to fix hinges and hold doors properly for a long life)

M&L for stainless steel (AISI 304 Grade ) Non magnetic multilayer nikle chrome plated for multipurpose utensil container including frame work telescopic channels, handles etc as reqd and complete all as specified and as directed utensil sample, design and pattern of each basket to be approved by GE the following size in each kitchen (A) plain basket 510x470x100mm or 520x485x100mm or 530x505x150mm slace godrej code 6126 Baan code LKY2PB 2014 -Evershine size 520x485x90mm (b) multisize plate basket of size 510x470x150mm or 520x485x150mm or 436x500x200mm (Clear depth 500mm) 01 nos make Silk Elnora BAAN code LKY-3CS214- Ever shine size 520x485x90mm approved by GE

(c) Cutlery Basket, with Perforated bottom and side of compacted -slots for holding cutlery of size 510x470x100mm or 520x485x100mm or 144x468x50 (Clear depth of 500mm) 01 nos make Silk Elenora (Asian Paint) code 600, size 530x505x100mm (Godrej Product code 6134 BAAN Code LKY2PC214/Ever shine size 520x485x95mm (d) Plain basket of size 510x470x200mm or 520x485x200mm or 486x500x200mm 02 Nos make Silk Elenora (Asian Paint) code 600, size 53x505x200mm- Godrej product code 6128 BAAN code LKY 2PB218- Evershine size 520x485x180mm (e) pull out with 2 basket each of size 150x485x80mm or 100x485x80mm 01 Nos make Sleek Elenora (Asian Paint ) code 250 size 180x500x590mm / Godrej product code 6141 baan code LKYNS2SP6/Ever shine size 610x485x90mm (f) dust bin as reqd 01 Nos Make 200 series of Hettich

SEWAGE DISPOSAL

Excavation in trenches, n exc 1.5m wide and n exc 1.5m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10sq m on plan and n exc 1.5m in depth and getting out in Hard / dense soil complete all as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm in Hard and dense soil complete all as specified and directed.

Removing excavated Soil material exc. 5 km and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and directed.

M&L for cement concrete type D2 (1:4:8) (using 40 mm graded stone aggregate) in foundations filling and mass concrete complete all as specified and directed.

M&L for Concrete bed to drain pipe in plain Cement concrete 1:3:6 type C-2 including packing under, and haunching against the sides ofpipes after they are laid and tested complete all as specified and directed.

M & L for 150 mm dia Reinforced concrete pipes, class NP2, laid and jointed complete with collars laid in trenches and jointes complete all as specified and directed.

M/L PCC 1:2:4 type B1 using 20mm graded stone aggregate as in Coping /benching including necessary form work and finishing all exposed surfaces of concrete complete all as specified and directed.

Providing precast cement concrete type B1 (1:2:4) 20mm graded stone aggragate as in cover slab f man Hole in window or door cills, Lintels, bressumers, steps, quoin blocks (for use with masonry), string courses , copings, kneelers, apex stones, pier caps, columns, posts, boundary pillars, bed plates, pintle blocks (for stone wallins). Corbels, brackets, etc (of any section indicating), with plain fair faces, including chamfers, weatherings throat-ing etc. and setting in mortar complete with joints to match but in landing, covers slabs (for man holes etc) chullah hoods, chajjas, water throughs, manager shelves and similar articles with plain faces complete all as specified and directed.

M&L for rendering 15mm thick fair faces of brick work or on concrete surfaces of External in CM (1:4) finished the surface even and fair wihtout using extra cement complete all as specified and directed.

M&L for rendering 10mm thick fair faces of brick work or on concrete surfaces of internal in CM (1:6) finished the surface even and smooth wihtout using extra cement complete all as specified and directed.

FENCING AND GATE

Excavating in post holes (or similar holes) each n exc 0.5 cum in soft/loose soil and getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm complete all as specified and directed.

S & F angle iron or flat iron as in hand rails, half round or other stock section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts; posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed.

S & F of Mild steel round bars 10mm dia Fe-410-W (Gde.E-250) Part- I quality-A or Fe 290 (Gde - E-165), cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

S & F of Mild steel screw bolts (machine made) of neck diameter 10 mm & 40mm long with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut complete all as specified and directed.

Supply only chain link fencing, galvanised mild steel of mesh 50mm x 50mm size, 4mm gauge complete all as specified and directed.

Fixing only chain link fencing, including line wires 50mm x 50mm mesh, 4mm gauge galvanised mild steel to any type of standards, rails, straining bolts etc complete all as specified and directed.

Preparation of new steel surfaces and applying two coats of black bituminuous paint complete all as specified and directed.

M & L Framed work as in doors or gates of angle or other section with gusset plate or rails ,baraces ,etc.compltete drill for fixing steel sheeting or other covering door etc to be prepared for hanging or sliding with and including with hanging and higes (excluding steel sheeting or other covering ,running rails and guides.) and hanging also fastening complete conforming to FE -410 GDE E 250 complete all as specified and directed.

M&L for applying two coats of synthetic enamel paint (1st quality) over a coat of red oxide primer on new steel surface n exc 10 cm width or girth complete all as specified and directed.

AREA DRAINAGE

M&L for Brickwork with fly ash brick in CM 1: 4 straight or curved on plan exc 6 m mean radiuscomplete all as specified and directed.

Extra for forming fair finished drain or channels 30 cm inner girth in cement concrete using extra cement including form works, moulds, mitred/stopped and etc complete all as specified and directed.

INTERNAL ELECTRIFICATION

Taking down carefully aluminium point wiring any type including battens if any except for ceiling or where not feasible for light/ fan//bell/socket or power and including unscrewing from board, fitting and fixture such as switches,socket, ceiling rose,lamp holder,pendants, bracket and regulator etc and removing material from site including making good disturbed surface to match with the existing surface complete all as specified and directed.

Taking down carefully unserviceable main switch DBs incl MCCBs and MCBs of any description of an size in any position complete all as specified and directed.

Taking down submain wiring including all accessories complete all as specified and directed.

M&L for concealed type wiring for one light/ fan/ bell point controlled by one switch with1.5 Sqmm (Nominal area) PVC insulated, unsheathed, stranded copper, conductor cable (1100Volts grade) FRLS,ISI marked, drawn in and including rigid PVC conduits ,20/25 mm dia all as directed with all fittings and accessories alongwith PVC insulated cable with solid copper conductor of size 1.5 Sqmm as earth continuity conductor including fixing of 2mm thick MS sunk terminal box duly flushed to wall with 3mm thick plastic laminated/ebonite sheet cover fixed with brass screws,cap and washers incl. making good the disturbed surfaces complete all as below:-

(a) One light / fan/ exhaust fan point controlled by one switch.

(b) One 5 pin 5 Amp switch socket out let point on an independent board.

(c) One 5 pin 5 Amp socket out let point controlled by one switch on same board.

(d) One buzzer/ bell point controlled by one push button on the same board with other switches or independent

All as per item 200 here in before but for one 15 Amp 6 Pin switch socket out let independent with 2.5 Sqmm FRLS (Nominal Area) PVC unsheathed copper conductor single core multistranded complete all as specified and directed.

M&L for sub main wiring with two single core 6.0 Sqmm (FRLS) copper conductor PVC unsheathed cable medium grade including PVC conduit (appropriate size) concealed in wall for sub main connection including 6.0 Sqmm (FRLS) PVC insulated multistranded unsheathed copper conductor used as a earth wire to common earth and connection to earth dolly complete all as specified and directed. (Note :- Two runs of 6.0 sqmm (FRLS) and one run of 6.0 sqmm (FRLS) copper conductor shall be measured as one unit length.)

S&F sheet metal enclosure factory fabricated for Multiphase Out going suitable for Mounting MCCB as Incomer of rating 100 Amp Vertical distribution board 4 way with suitable Amp rated bus bar having IP-42 protection and double metal door concealed in wall including connection with aluminium thimbles as required complete all as specified and directed. (Note : MCCB & MCB Shall be Measured and Paid Separately ) Make : C&S Cat No CSDBTPNVDD04S, Legrand Cat No 507720, Indo Asian Cat No 811893

S&F for MCCB 100 Amp,415 V 16 KA, 4 Pole including complete electrical connection by appropriate size of copper lugs complete all as specified and directed. Make : C&S Cat No CSE1M125ATM4P, Legrand Cat No 420415, Indo Asian Cat No 830272

S&F switch piano flush type 5 Amp single pole one way complete all as specified and directed. Make : Anchor, Cona, Plaza

S&F socket out let 2 in 1 flush type 5 Amp 5 Pin complete all as specified and directed. Make : Anchor, Cona, Plaza

S&F switch socket combination out let 6 Pin 2 in 1, 5/15 Amp flush type 240 Volt complete all as specified and directed. Make : Anchor, Cona, Plaza

S&F bell push flush type 5 Amp complete all as specified and directed. Make : Anchor, Cona, Plaza

S&F bell ding dong musical ,AC, 230 Volt, single pole complete all as specified and directed. Make : Anchor, Cona, Plaza

Supply and Fixing ceiling rose PVC / Poly carbonate, Isolated body, three terminal AC 230 volts complete all as specified and directed. Make : Anchor, Cona, Plaza

Supply and fix in replacement of fan regulator 150 watts electronic flush socket type with five stepped range hum free complete all as specified and directed. Make : Anchor, Cona, Plaza

M & L for replacement of lamp holder, PVC / Poly carbonate, insulated body with back plate batten/angle type for batten fittings complete all as specified and directed. Make : Anchor, Cona, Plaza

S&F MCB SPN 63 Amp 240 volt complete all as specified and directed. Make : C&S Cat No CSMBS1B63N, Legrand Cat No 408620, Indo Asian Cat No 811056

S&F MCB single pole 6 to 32 Amp 240 Volt 'B' curve 10 KA complete all as specified and directed. Make : C&S Cat No CSMBS1B63, Legrand Cat No 408595, Indo Asian Cat No 811016

Supply and fix flush sheet metal enclosure SPN DB 8 way with double door IP-42 protection detachable gland plates, flush mounting for MCB fitted with bus bar , earth bar and neutral links complete including taking down old unserviceable complete all as specified and directed. C&S Cat No CSDBSPNDDA2+08, Legrand Cat No 507611, Indo Asian Cat No 811807

S&F in replacement LED mirror light fitting of 1 x 10 watt T-5 lamp type with electronic ballast of suitable capacity, clear acrylic cover including mounting on wall complete all as specified and directed. Make : Crompton Cat No LLL-10-CDL, Wipro Cat No Wipro Magma LED 10W, Havells Cat No ENDURALINEARNEOBS10WLED865SPCWH

S&F indoor decorative LED City-3 light fitting suitable for & including single 6 Watt LED lamp with polycarbonate body with upper globe complete all as specified and directed. Make : Crompton, Wipro, Havells

Supply and fixing surface mounting LED light fitting AL extruded T-5 batten , 20 Watt, 4 feet including connection with 23/0.0076 three core PVC flexible cable etc complete all as specified and directed. Make : C&S Cat No TATRA-Ei/20W, Crompton Cat No LCTL18CDL+LLT8-20, Havells Cat No ENDURALINEARNEOBS20WLED865SPCWH+CRYSTAL, 1213TBDSTL20WLED865SGLASS

Taking down carefully serviceable exhaust fan including provision of new single core twin twisted cable from ceiling rose to ceiling fan connector and cleaning / greasing complete all as specified and directed.

Material & Labour for earthing complete including taking out old unsv and replace with galvanised steel earth plate 600x600x 6mm thick, buried directly in ground (earth pit not less than 2.25 mtr deep below ground level ) with top edge of the plate not less than 1.5 meters below normal ground level, surrounded with adequate quantity of charcoal dust mixed with salt to a packed thickness of 15 cm all around the plate using 4 mm dia GI wire as earth wire electrode moulded and rivetted to earth plate at one end and connected to main switch/ control switches of buildings at another end, GI earth wire encased in and including 15 mm dia GI 'light grade' pipe from upper end of earth plate upto main switch board of building including 20 dia bore GI pipe 'light grade' as water pipe from earth chamber and including excavation and earth work, PCC 1:3:6 type C1 chamber and MS angle iron frame 40x40x3mm and RCC cover 40mm thick (1:2:4) type B1 using 20mm graded stone aggregate reinforced complete all as specified and directed.

Supply only LED lamp 12 Watt, 230 V , AC integrated circuit complete all as specified and directed. Make : Crompton, Bajaj, C&S

S&F porch light surface type LED Ceiling tile type fittings 6 Watt, with integrated electronic driver dimensions 300 x 300 mm connected with 3 core 23/.0076 insulated copper wire from ceiling rose to fitting connector, with hanging arrangement complete all as specified and directed. Make : Philips Cat No (1738130PN+B22LED BULB 20Watt) Or equivalent in Bajaj / Crompton / Wipro / Surya

Taking down the old unserviceable electronic/ electric meter from wooden board complete all as specified and directed.

Supply & fix Single phase , two wire ,240 volt , 10- 60 A or less, accuracy class 1.0, IS Markied,single source pre payment meter including CIU & STTD complete all as specified and directed.

S&F bulk head light fitting, 1x9W attractive surface mounted type, with sheet steel housing with opal acrylic diffuser and decorative end plates. Plastic housing wire and ballast , suitable for mirror fittings, , lamp holders, connector blocks incl LED lamp10 Watt etc. complete with all accessories in and including connecting up with twin core twisted flexible copper conductor cable with suitable size copper wire complete all as specified and directed. Make : C&S Cat No CG801B6LED (e-Tarta/6W or equivalent in Bajaj / Crompton)

Supply & Fixing security light fitting, LED type, 20 Watt, 6000 K, pressure die cast housing with prismatic polycarbonate diffuser & indvl LEDs as light source with integrated electronic driver complete with M&L GI pipe mounting bracket of size 25/32 mm dia and 1.20 m long fixed to wall with and including nut, bolts and GI clamps of size 50 x 6 mm as required including two coats of synthetic enameled paint over a coat of primer and making connection with three core 23/.0076 rubber insulated copper cable from ceiling rose to connector of street light complete all as specified and directed. Make : C&S Cat No LTESS20WLED/LS, Crompton Cat No LST-20-CDL, Surya Cat No SLE UL 20WIP66 LXN

Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 50 sq mm 3.5 core incl taking down existing unserviceable UG cable complete all as specified and directed. Make : Havells, Polycab, KEI

Supply, installing, testing and commissioning ceiling fans 1200mm sweep, 230 volt, AC, 50 Hz single phase complete and including connecting up with flexible three core copper conductor from ceiling rose to fan connector etc all as specified. (Old ceiling fans should be deposited to AGE E/M store yard) Make : Bajaj, Elegance 1200 mm Bianco CF Havells, Orient

Supply, installing, testing and commissioning exhaust fans PVC body 250 mm sweep, 230 volt, AC, 50 Hz single phase complete and including connecting up with flexible three core copper conductor from ceiling rose to fan connector etc complete all as specified and directed. Make : Bajaj, Havells, Orient

Supply, installing, testing and commissioning electric water heater(Geyser) 25 Ltrs capacity, AC, 50 Hz single phase complete and including connecting up with flexible three core copper conductor etc complete all as specified and directed. Make : Bajaj-Shakti 25L Water Heater, havells-GHWAPXTIV025, USHA

M&L point wiring for inverter point with provision of 5 Amp switch socket combination with single core wire suitable for inverter wiring in all board for light and fan point including all bedrooms, hall, kitchen toilet etc complete all as specified and directed.

S & F TV socket complete with accessries complete all as specified and directed.

S & F PVC conduit with accessories 25 mm dia for drawing telephone/TV/internet wires complete all as specified and directed. Note :- ( only PVC conduit with accessories shall be measured and paid).

M & L for taking down exhaust fan and servicing and rewiring of exhaust fans of any size with complete rewiring & connected accessories such as washers,pins, and removing the rusted area with emery paper and spray painting of existing colour complete and including connecting up with flexible three core copper conductor from ceiling rose to fan connector etc complete all as specified and directed.

Material and labour for Brick protection with sub class 'B' bricks old size, laid dry, flat over cable, perpendicular across the cable in trenches complete all as specified and directed.

S&F GI tube 80mm bore light grade galvanised with all fittings and fixed complete for road crossing /on wall/floor and crossing culvert or laid in floor complete all as specified and directed.

Taking down carefully unserviceable ceiling fan and deposited to AGE E/M store yard complete all as specified and directed.

Supply and lay dry river sand filling for under ground cable protection with a layer of 8cm deep before laying and 15cm covering above the top edge of cable after laying complete all as specified and as directed.

M&L for PCC (1:2:4) type B-1 (using 20 mm graded stone aggregate) as in channels/ benching of manhole, laid to shape and slope and surfaces finished even and smooth using extra cement, complete including formwork all as specified and directed.

Demolition of Concrete of any description and in any position not otherwise specifically provided for complete all as specified and as directed.

Taking down Old water heater(Geysers) 25 Ltrs capacity complete all as specified and directed. (Note:- Old geysers should be deposited to AGE E/M store yard)

Note : Tenderers may note that amount of credit Rs 9,99,350.00 will be deducted from the total amount arrived, at the time of Acceptance of contract.

TEAM ACC INFRABUILD PRIVATE LIMITED

M/s Arihant Builders