Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹27.7 LAccepted-AOC 10 MAKHAN LAL SADHUKHAN LANE PO PS BARRACKPORE KOLKATA 700120 W B | KOLKATA | NORTH 24 PARGANAS | WEST BENGAL | 700120 | L1 | Accepted-AOC Over all rates are reasonable and lowest. | |
| 2 | L2₹29.3 L+₹86,868 (3.05%)Rejected-Finance | L2 | Rejected-Finance Over all rates are higher than L-1. | |
| 3 | L3₹31.2 L+₹2.8 L (9.85%)Rejected-Finance | L3 | Rejected-Finance Over all rates are higher than L-1. | |
| 4 | L4₹32.4 L+₹4.0 L (14.1%)Rejected-Finance 35 A 60 RAMPUR GARDEN BAREILLY UP | BAREILLY | BAREILLY | UP | L4 | Rejected-Finance Over all rates are higher than L-1. | |
| 5 | L5₹32.7 L+₹4.3 L (15.1%)Rejected-Finance 113 SURESH SHARMA NAGAR NEAR S S V ENTER COLLEGE BAREILLY 243001 | BAREILLY | UTTAR PRADESH | 243001 | L5 | Rejected-Finance Over all rates are higher than L-1. |
Tender Value
₹48 L
EMD Value
₹96,000
Closing Date
27 Jul 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE WEST BAREILLY
GE WEST BAREILLY
WELCOME MAINT TO OFFRS ACCN OF PB MARG, CWL AND ZONE I TO IV UNDER AGE B/R - II OF GE (W) BAREILLY.
2023_MES_607319_1
8140/C/E8
Open Tender
Civil Works
Item Rate
330 days
GE WEST BAREILLY
Please refer Tender documents.
8 documents required · 8 mandatory
₹500
GE WEST BAREILLY
₹96,000
Yes
8 Sept 2023
30 Jun 2023
29 Jul 2023
30 Jun 2023
27 Jul 2023
15 Jul 2023
Amount
Demolition of brick work or stone / boulder masonry including all quoins, arches, pillars, etc. built in cement mortar or cement lime mortar complete all as specified and directed.
M & L for brick work with fly-ash old size bricks having designation 75 conforming to IS-12894 (2002), straight or curved on plan exc. 6.00 m mean radius built in cement mortar 1:6 complete all as specified and directed.
Demolition of cement concrete (un-reinforced) in ground floor and paving not exc. 15 cm thick (Below or above ground level) complete all as specified and directed.
M & L for providing plain cement concrete, type D-2, 1:4:8 (using 40 mm graded stone aggregate) as in foundation, filling and mass concrete complete all as specified and directed.
M & L for 25 mm thick cement concrete type B-1, 1:2:4 (using 20 mm graded stone aggregate) as in sub floor of floor finishes, finished even and rough complete all as specified and directed.
M & L for glazed ceramic coloured tiles 300 mm X 200 mm X 7 mm thick as on vertical surface of wall such as skirting, dado, riser etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface of tile over and including 10 mm thick cement plaster / screed bed on fair faces of brick work or concrete surfaces in cement mortar 1:4 on vertical surfaces of wall finished even and rough suitable for laying wall tiles and dismantling of wall tiling including cement mortar bedding (but not backing) including removing the rubbish off the premises complete all as specified and directed.
M & L for glazed ceramic coloured tiles 450 mm X 300 mm X 7 mm thick as on vertical surface of wall such as skirting, dado, riser etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface of tile over and including 10 mm thick cement plaster / screed bed on fair faces of brick work or concrete surfaces in cement mortar 1:4 on vertical surfaces of wall finished even and rough suitable for laying wall tiles and dismantling of wall tiling including cement mortar bedding (but not backing) including removing the rubbish off the premises complete all as specified and directed.
M & L for Non skid ceramic coloured tiles 7 to 8 mm thick (Square or Rectangular) area of each tile exc. 0.11 Sqm but not exc. 0.18 sqm, as in floor etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface of tile over and including 15 mm thick screed bed or bedding layer in cement mortar 1:6 for laying floor finishes finished even and rough and dismantling of floor tiling including cement mortar bedding (but not backing) including removing the rubbish off the premises complete all as specified and directed.
M & L for Non skid ceramic coloured tiles 7 to 8 mm thick (Square or Rectangular) area of each tile exc. 0.11 Sqm but not exc. 0.18 sqm, as on vertical surface of wall such as skirting, dado, riser etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface of tile over and including 10 mm thick cement plaster / screed bed on fair faces of brick work or concrete surfaces in cement mortar 1:4 on vertical surfaces of wall finished even and rough suitable for laying wall tiles and dismantling of wall tiling including cement mortar bedding (but not backing) including removing the rubbish off the premises complete all as specified and directed.
M & L for vitrified ceramic light shade coloured tiles 10 mm thick (Square or Rectangular) polished, area of each tile not exc. 0.36 Sqm, as in floor etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface of tile over and including 15 mm thick screed bed or bedding layer in cement mortar 1:6 for laying floor finishes finished even and rough and dismantling of floor tiling including cement mortar bedding (but not backing) including removing the rubbish off the premises complete all as specified and directed.
M & L for vitrified ceramic light shade coloured tiles 10 mm thick (Square or Rectangular) polished, area of each tile not exc. 0.36 Sqm, as on vertical surface of wall such as skirting, dado, riser etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface of tile over and including 10 mm thick cement plaster / screed bed on fair faces of brick work or concrete surfaces in cement mortar 1:4 on vertical surfaces of wall finished even and rough suitable for laying wall tiles and dismantling of wall tiling including cement mortar bedding (but not backing) including removing the rubbish off the premises complete all as specified and directed.
S & F of 16-18 mm thick machine cut granite stone slab, mirror polished of colour and shade as approved as in steps, jambs, pillars, window cills, cooking platforms and like, set in over and including 15 mm thick cement screed in cement mortar 1:4 and pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite and dismantling of stone slab, floor, hearth, terrazzo or wall tiling including cement mortar bedding (but not backing) including removing the rubbish off the premises complete all as specified and directed.
M & L for rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations complete all as specified and directed.
S & F in repairs 20 mm dia Stainless Steel fancy type drapery curtain rod with brackets and lattu & other connected accessories complete all as specified and directed.
S & F in repairs 20 mm dia Mild Steel fancy type drapery curtain rod with brackets and lattu & other connected accessories complete all as specified and directed.
M & L for rendering 15 mm thick cement plaster on fair faces of brick work or concrete surfaces with cement mortar 1:4 finished even and fair complete all as specified and directed.
Supply only liquid water proofing compound complete all as specified. MAKE- Dr. Fixit of pidilite or equivalent.
M & L for rendering 15 mm thick cement plaster on fair faces of brick work or concrete surfaces with cement mortar 1:6 finished even and smooth without using extra cement with and including preparation of new plastered or previously untreated surfaces of walls and applying two coats of distemper oil emulsion over a coat of primer and taking down cement or cement lime plaster from brick or stone walls etc. including raking out joints, hacking for keys, scrubbing down with water etc. complete all as specified and directed.
M & L for rendering 15 mm thick cement plaster on fair faces of brick work or concrete surfaces with cement mortar 1:4 finished even and smooth without using extra cement with and including preparation of new plastered or previously untreated surfaces of walls and applying three coats of white wash and taking down cement or cement lime plaster from brick or stone walls etc. including raking out joints, hacking for keys, scrubbing down with water etc. complete all as specified and directed.
M & L for rendering 5 mm thick cement plaster on cement concrete surfaces of ceiling with cement mortar 1:4 finished even and fair with and including preparation of new plastered or previously untreated surfaces of ceiling and applying three coats of white wash and taking down cement or cement lime plaster from ceiling complete all as specified and directed.
M & L for preparing newly plastered or previously untreated wall surfaces and applying two coats of cement base paint over one coat of primer complete all as specified and directed.
M & L for preparation of old decorated surface of walls including plugging nail holes with cement based wall care putty and applying one coat of oil bound distemper complete all as specified and directed.
M & L for preparation of old decorated surface of walls including plugging nail holes with cement based wall care putty and applying two coats of oil bound distemper complete all as specified and directed.
M & L for preparation of old decorated surface of ceiling including rubbing down old white wash or distemper and applying one coat of oil bound distemper complete all as specified and directed.
M & L for preparation of old decorated surface of walls including rubbing down old white wash and applying one coat of white wash complete all as specified and directed.
M & L for preparation of old decorated surface of walls including rubbing down old white wash or cement base paint and applying one coat of cement base paint complete all as specified and directed.
M & L for preparation of old decorated surface of ceiling including rubbing down old white wash and applying one coat of white wash complete all as specified and directed.
S & F in repairs door seal of aluminium powder coated with cotton mat of length 90 cm to 100 cm complete all as specified and directed.
M & L for complete removal of existing treatment from wall / ceiling surfaces and rubbing down with sand paper to obtain even and smooth surfaces complete all as specified and directed.
M & L for applying average 2 mm thick layer of wall care putty on wall / ceiling surfaces including rubbing down the surfaces with sand paper after getting dried to obtain a smooth & even surface complete all as specified and directed.
S & F in repairs aluminium extruded section body door closer hydraulically regulated designation No. 3, universal type suitable for door shutter 851 to 1000 mm in width and 61 to 80 Kg in weight complete all as specified and directed.
M & L for preparation of old painted wooden surfaces exc. 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.
M & L for preparation of old painted steel surfaces exc. 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.
S & F of 15 mm bore steel water tubing medium grade galvanized with and including all fittings and fixed to walls and ceilings or laid under floors including taking up or down old unserviecable one complete all as specified and directed.
S & F of 20 mm bore steel water tubing medium grade galvanized with and including all fittings and fixed to walls and ceilings or laid under floors including taking up or down old unserviecable one complete all as specified and directed.
S & F in repairs vitreous china wash down water closet pan (Pedestal pattern) white including fixing bolts and making connection to flushing cistern, flush pipe etc. complete all as specified and directed.
S & F in repairs vitreous china water closet squatting pan ‘Orissa’ pattern size 580 X 440 mm white with integral foot rests (excluding flushing cistern and flush pipe) including suitable size trap and lean concrete as required complete all as specified and directed.
S & F in repairs plastic seat cover suitable for water closet pedestal pan, white, closed pattern with flat bottom and cover and mid steel chromium plated or aluminium hinges devices complete all as specified and directed.
S & F in repairs 10 litres capacity PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including 32 mm dia PVC waste pipe suitable for low level cistern, L type, brackets fixed on wall complete all as specified and directed.
S & F in repairs vitreous china wash basin white flat back 550 mm X 400 mm excluding tap, waste, chain & plug but including brackets complete all as specified and directed.
S & F of 1 mm thick stainless steel sink with drainage board kitchen or laboratory type with plug washer and waste including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe, over all size of sink 915 mm X 460 mm and bowl size 410 mm X 330 mm X 160 mm complete all as specified and directed.
S & F in repairs plate rack made out of 1 mm thick stainless steel sheet of size 75 cm X 90 cm X 25 cm with all internal fittings (as per sample) complete all as specified and directed.
S & F in repairs waste coupling 32/40 mm dia brass chromium plated suitable for glazed ware sinks / basins etc. with long screwed shanks and fly nuts flange and bedded in red lead cement and other end fixed complete all as specified and directed.
S & F in repairs PVC waste pipe 25 mm dia 750 to 800 mm long fixed to waste fitting of wash basin including socket suitable for waste fitting complete all as specified and directed.
S & F in repairs centre hole basin mixture 15 mm dia chromium plated complete all as specified and directed.
S & F in repairs 15 mm bore fancy type, chromium plated stop valve / angle valve / two way angle valve cast copper alloy, screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions complete all as specified and directed.
S & F in repairs 15 mm bore bib tap, chromium plated fancy type, long body with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed.
S & F in repairs 100 mm size brass chromium plated shower rose with or with out swivel joint including shower arm 195 mm long with bend of 45 degree and flange, fixing to steel pipe or union complete all as specified and directed.
S & F in repairs chromium plated wall mixture with connection for shower arragement complete all as specified and directed.
S & F in repairs water jet for EWC chromium plated with PVC connection pipe complete all as specified and directed.
S & F of chromiumm plated heavy duty extension piece 15 mm bore and 25 mm long complete all as specified and directed.
S & F in repairs Chromium plated hand shower (health faucet) alongwith 1 metre long PVC tube and wall hook suitable for EWC complete all as specified and directed.
S & F of 450 mm long in repairs PVC connection with two Nos. PTMT nuts internally threaded and PVC washer suitable for 15 mm bore pipe line complete all as specified and directed.
S & F in repairs chromium plated toilet paper stand as per sample kept with Engineer- in-charge complete all as specified and directed.
S & F in repairs chromium plated towel ring as per sample kept with Engineer- in-charge complete all as specified and directed.
S & F in repairs glass shelf with chromium plated brackets of suitable size as per sample kept with Engineer- in-charge complete all as specified and directed.
S & F in repairs 15 mm size bib tap standard of PTMT, any colour high pressure screwed for iron pipes (minimum weight 90 gram) complete all as specified and directed.
S & F in repairs 15 mm size pillar tap of PTMT, any colour high pressure screwed for iron pipes (minimum weight 110 gram) complete all as specified and directed.
S & F in repairs 15 mm size stop cock, angle valve of PTMT, any colour high pressure screwed for iron pipes (minimum weight 90 gram) complete all as specified and directed.
S & F in repairs stainless steel soap dish as per sample kept with Engineer- in-charge complete all as specified and directed.
S & F of 500 Litre capacity rotational moulded polythene water storage tanks (cylindrical vertical with closed top) of triple layer constructions, white in colour and hoisted, fixed in position with and including dismantling of existing water tank any capacity complete all as specified and directed. Make- Sintex pure, Vectus smart and Supreme white.
S & F of 1000 Litre capacity rotational moulded polythene water storage tanks (cylindrical vertical with closed top) of triple layer constructions, white in colour and hoisted, fixed in position with and including dismantling of existing water tank any capacity complete all as specified and directed. Make- Sintex pure, Vectus smart and Supreme white.
S & F in repairs vitreous china wash down water closet single piece (Cascade pattern) with UF seat cover, hinges, fixing accessories, cistern fittings, overall size 655 x 665 x 760 mm, S trap 300 mm including connection to drain pipe etc. complete all as specified and directed. MAKE- Jaquar CAT No. LYS-WHT-38851S or equivalent in Cera / Hindware.
Repair of aluminium door/window/ ventilator/ partition wall etc of any size / any number of panels including taking down (if required) & refixing for easy closing/ opening/ tightening of hinges or changing the position of hinges, adjustment of floor door spring of hydraulic door closure, adjustment of tower bolts, sliding bolts etc changing of mortice lock complete all as specified and directed.
Repairs to steel windows by replacing all old friction hinges with box type hinges, making the windows functional incl all necessary welding etc as required at site and as directed.
S&F Mortie lock, verticle type size 100 mm mild steel complete all as specified.
Dismantling of corrugated or semi corrugated roof sheets any description from roof covering complete all as specified and directed.
S & F of 6 mm thick asbestos cement corrugated or semi-corrugated sheets fixed with ‘L’ type or ‘J’ type or cranked hook bolts and washers as in roof covering, walls etc. complete all as specified and directed.
S & F of 0.50 mm thick pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet of any colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws complete all as specified and directed.
S & F of 0.50 mm thick pre-painted galvalume aluminum zinc coating GI based plain steel sheet of any colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws complete all as specified and directed.
S & F in repairs handles, stoppers by welding or rebating as required to steel windows by replacing of all old handles, stoppers and making the windows functional including all necessary welding work etc. as required at site complete all as specified and directed.
Repair of flush or skelton doors shutter with aluminum, wooden, PVC sheet as required as per site including taking down the door and fixing the same in same opening complete all as specified and directed.
M & L for grinding and polishing to old existing terrazzo or kota stoe flooring / skirting complete all as specified and directed.
Repairs of WHB mixture / shower pannel / float valves of one piece EWC / angle vagle / bib tap including all required accessories complete all as specified and directed.
M & L for polishing to old wall paneling complete all as specified and directed.
M & L for 75 mm thick cement concrete 1:3:6 type C-2, using 40 mm graded stone aggregate as in plinth protection laid to slop of 1:12, finished surface even and fair without using extra cement with and including all necessary form work to divide the area in panels, finishing exposed edges fair or rounding or chamfering where directed and providing 6 mm wide joints through out the thickness of plinth protection duly filled with mastic filling (one part of hot bitumen 85/25 and three part of fine sand by weight) complete all as specified and directed.
Taking down door or window shutter of any description exc. 1.00 Sqm but not exc. 2.00 Sqm each complete all as specified and directed.
Taking down chowkhats or frames area exc. 1.50 Sqm but not exc. 4.00 Sqm each with shutters (without taking off shutters from the frames) complete all as specified and directed.
Taking down chowkhats or frames area not exc. 1.50 Sqm each with shutters (without taking off shutters from the frames) complete all as specified and directed.
S & F of solid PVC door frame of size 50 mm X 47 mm made out of 5 mm thick single side prelam PVC sheet and edges will be painted to match with prelam sheet reinforced with mild steel square tube as per specification and drawing given on MES schedule Part – II (2020) complete all as specified and directed.
S & F of 30 mm thick (style thickness) factory made solid panel PVC shutter consisting of frame made out of mild steel tubes for top and bottom rails, mild steel frame shall be covered with heat moulded both sides prelam PVC 'C' channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and both sides prelam PVC sheets for top rail, lock rail and bottom rail on either side & as gap insert for top rail and bottom rail, panelling of both sides prelam PVC sheet to be fitted in the MS frame welded / sealed to the stiles and rails with suitable side feathered edge beading and joined together with solvent cement as per specification and drawing given on MES schedule Part – II (2020) complete all as specified and directed.
M & L for 2nd class hard wood plain, solid, straight chowkhats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and directed.
S & F of 30 mm thick flush shutter solid core construction with block board core and plywood face panels commercial type on both faces complete all as specified and directed.
S & F of 30 mm thick (Batten thickness) 2nd class hardwood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze etc. divided into squares, without sash bars, edges of framing plain, chamfered or rounded, fitted with cut and mitered beads for securing glass etc. and size of the members of shutter is as specified in clause No. 8.24 (a) of MES schedule 2009, part – I (Specifications) complete all as specified and directed.
S & F in repairs factory made PVC Cupboard frame of the size 75mm x 40 mm with a wall thickness of 5 mm, made out of extruded 5 mm thick plain / prelam PVC sheet of density 600 kg per cbm, having bottom width of 50 mm and thickness of 10 mm. All four frame lengths reinforced with 15 mm x 15 mm MS square tubes of 19 gauge thickness throughout the frame and mitre cut at two corners adjointed with 2 Nos. of 15 mm long brackets of 10 mm x 10 mm MS square tubes. The door frame shall be fixed to the wall using 8 X 100 mm long MS screws through the frame by using PVC fasteners. A minimum of 4 Nos. of screws to be provided for each vertical member and minimum of 2 Nos. of screws to be provided horizontal member etc. complete as per manufacturer's specification and drawing and all as specified and directed.
S & F factory made PVC cupboard flush type shutter of 30 mm thick consisting of frame made out MS tubes of 19 gauge thickness and size 19 mm x 19 mm for styles and rails. The inside panel shall consist of 20 mm thick multichamber hollow PVC section of 1 mm wall thickness, bonded using solvent cement / cynoacrylate adhesive with 5 mm thick plain / prelam PVC sheet on both side of inside panel including necessary items to fix the shutter to frame such as 100 mm stailess steel hinges, 100 mm long handles made of anodised aluminium and magnetic ball catch for each pair of shutter. All four edges of the panel to be sealed with lipping of 10 mm thick and 20 mm wide PVC sheet batton (made by sticking 2 Nos. PVC foam sheet of 5 mm thickness using PVC solvent cement adhesive) complete as per manufacturer's specification and drawing and all as specified and directed.
S & F of PVC board 19/20 mm thick any colour / prelaminated as in cabinets including shelves and shutters, fixed with screws and adhessive as per manufacturer's instructions including piano hinges, magnet catcher, handles etc. complete all as specified and directed.
S & F of 5 mm thick PVC sheet / board of colour / prelaminated both side or one side preleminated and other side plain sheet, fixed to almirah / wall complete all as specified and directed.
S & F steel windows with pressed steel frame (size 95 x 45 x 1.25 mm ) side hung shutter including box type hinges with steel handle and steel peg stay with glazed openable shutter with glazing bar (open out side) and wire gauged openable shutter without glazing bar (open inside) dovetailed or welded complete all as specified and as shown on drawing No. TD/088 dated 07 Jan 2002. NOTE- Two shutters i.e. wire guaged and glazed shall be fixed in one composite frame and both shutter shall be measured as one unit. Rate for filling PCC in backside of frame deemed included in quoted rate. MS grill shall be measured and paid seperatly under relevant item of schedule.
S & F of mild steel framed work such as grills, gratings etc. with ends of bars shouldered and / or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railing, frame work of water tanks and similar work conforming to Fe-290 Grade E-165 complete all as specified and directed.
S & F in repairs 150 mm long double legged door stopper of aluminium alloy with rubber shoe complete all as specified and directed.
S & F of 150 mm long stainless steel butt hinges, medium weight complete all as specified and directed.
S & F of 150 mm long aluminium anodised barrel tower bolt of extruded section complete all as specified and directed.
S & F of 150 mm long extruded anodised aluminium alloy handle, fabricated type complete all as specified and directed.
S & F of 125 mm size mild steel hasp and staple wire type, stove enamelled lack including bolt to hinge plate and fixed with screws complete all as specified and directed.
S & F of 300 mm long (Length of bolt) aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheets, cast or extruded sections and fixing bolts and sliding bolt of extruded sections or cast aluminium alloy complete all as specified and directed.
S & F of 2nd class hardwood small fittings such as brackets of any type, latch and hinge blocks, shaped door and window stops and the like duly fixed with 100 mm long mild steel butt hinge including all necessary labour, article not exc. 200 cucm each complete all as specified and directed.
M & L for preparation of new or previously untreated wooden surfaces exc. 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.
M & L for preparation of new or previously untreated steel surfaces over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and directed.
Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and directed.
S & F of 3 mm thick plain, ordinary quality sheet glass and glazing with oil putty or fixed with wooden beads in square not exc. 0.5 sqm in each pane complete all as specified and directed.
S & F in repairs galvanised mild steel wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks or galvanised wire staples complete all as specified and directed.
S & F in repairs 150 mm helical door spring complete all as specified and directed.
M & L for 4 mm thick E-board classic (Eeverest / equivalent) tiles for insulation and accoustic purpose 60 X 60 cm with and including powder coated galvanised iron snap grid with 32 X 25 X 1.5 mm thick tee section and 32 X 25 X 1.5 mm thick angle section with all hanging / supporting arragements as in false ceilling including taking down old ceiling with frame and making good disturbed surface complete all as specified and directed.
S & F of 110 mm bore PVC (SWR) pipe single socketed, in any length with rubber ring joint fixed to walls including dismantling of old unserviceable one complete all as specified and directed.
S & F of 110 mm bore PVC (SWR) bend any radius complete all as specified and directed.
M & L for providing 40 mm thick cement concrete 1:2:4 type B-1 (using 20 mm thick graded stone aggregate) as in floor and finishing top surface even and smooth with using extra cement complete all as specified and directed.
M & L for providing plain cement concrete 1:2:4, type B-0 (using 12.5 mm graded stone aggregate) as in levelling course finished even and fair without using extra cement on roof surface / chajja / mud stopper any thickness complete all as specified and directed.
Taking down hood covers of rolling shutter of area not exceeding 6 sqm loose bracket plate or guide, properly greasing helical spring, shafts and guide channel for proper functioning of rolling shutter and refixing covers in position after repairs complete all as specified and directed.
NOTES:- (a) Material not included in schedule of credit and debris from the dismantling having lowest value / Nil value shall be the property of department. The same shall be removed / disposed or deposited by the contractor in MES stores yard of GE (West) Bareilly as directed for which no additional payment shall be made. The contracotor shall be fully responsible to safe guard these materials against loss / theft / deterioration etc. till the same to be deposited by him in MES Store yard. (b) The contractor or his authorized representative shall attend office of AGE B/R for collection of complaints raised by user on regular basis and same has to be rectified / completed on requirement basis. If the contractors unable to rectify the complaints within stipulated time of 7 days (Maximum), penalty will be imposed to the contractor at the rate of Rs 500.00 per day for each complaint. (c) The above aspects shall be borne in mind by the tenderer while quoting the rates. The rates quoted by the tenderer shall be deemed to include the above aspects. (d) Tenderers may note that amount as given in schedule of credit will be deducted from the total amount to worked out the net contract sum at the time of Acceptance of tender.
M/S YASHCON CONSTRUCTIONS
M/S VIRAT CONSTRUCTION
M/S Shree Sai Builders
M/S Harshri Nath Enterprises
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .